Autoclaving of ultra-high performance concrete (UHPC)
- By the combination of an optimized granulometry, a reduced water cement ratio and the use of superplasticizers ultra-high performance concrete achieves a compressive strength of over 150 N/mm2 and a high resistance regarding acids and water-soluble salts. In different Research projects the effect of an autoclavation on the mechanical strength and the phase composition was analyzed. In systematic studies, the concrete mix and the process parameters were varied. The results show that autoclavation leads to an improved pozzolanic and hydraulic reaction and significantly improves the mechanical strength compared to a conventional thermal treatment. If a minimum time-span for hydration is ensured, the achievable strength level is not dependent on the prestorage time. However, the duration of the autoclaving is significant. After the Maximum strength is reached there is only a very slight decrease, even if unrealistically long autoclaving times are applied.
Autor*innen: | Julia von WerderORCiD, Sebastian SimonORCiD, C. Lehmann, C. Selleng, P. Fontana, Birgit MengORCiD |
---|---|
Dokumenttyp: | Beitrag zu einem Tagungsband |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | ICAAC 6th International Conference on Autoclaved Aerated Concrete |
Jahr der Erstveröffentlichung: | 2018 |
Organisationseinheit der BAM: | 7 Bauwerkssicherheit |
7 Bauwerkssicherheit / 7.1 Baustoffe | |
Herausgeber (Institution): | European Autoclaved Aerated Concrete Association (EAACA) |
Verlag: | Wilhelm Ernst & Sohn - Verlag für Architektur und technische Wissenschaften GmbH & Co. KG |
Verlagsort: | Berlin, Germanry |
Erste Seite: | 131 |
Letzte Seite: | 136 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | Heat treatment; Hydroxylellestadite; Tobermorite; Ultra-high performance concrete; Zonation |
Themenfelder/Aktivitätsfelder der BAM: | Material |
Veranstaltung: | ICAAC 6th International Conference on Autoclaved Aerated Concrete |
Veranstaltungsort: | Potsdam, Germany |
Beginndatum der Veranstaltung: | 04.09.2018 |
Enddatum der Veranstaltung: | 06.09.2018 |
DOI: | 10.1002/cepa.866 |
ISBN: | 978-3-433-03276-3 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 25.10.2018 |
Referierte Publikation: | Nein |