Tales from Within: Residual Stress and Void Formation in LPBF 316L
- An unusual microstructure, inherent residual stresses and void formation are the three key aspects to control when assessing metallic parts made by LPBF. This talk explains an experiment to unravel the interlinked influence of the two mechanisms for the formation of residual stresses in LPBF: the temperature gradient mechanism and constricted solidification shrinkage. The impact of each mechanism on the shape and magnitudes of the residual stress distribution is described. Combined results from neutron diffraction, X-ray diffraction, computed tomography and in-situ thermography are presented. Also, influence of scan strategies as well as surface roughness of subjacent layers on void formation is shown. Results from computed tomography and in-situ thermography of a specimen dedicated to study the interaction of the melt pool with layers of powder underneath the currently illuminated surface are presented.
Autor*innen: | Alexander Ulbricht |
---|---|
Koautor*innen: | Simon AltenburgORCiD, Gunther MohrORCiD, Simon OsterORCiD, Maximilian SprengelORCiD |
Dokumenttyp: | Vortrag |
Veröffentlichungsform: | Präsentation |
Sprache: | Englisch |
Jahr der Erstveröffentlichung: | 2021 |
Organisationseinheit der BAM: | 8 Zerstörungsfreie Prüfung |
8 Zerstörungsfreie Prüfung / 8.0 Abteilungsleitung und andere | |
8 Zerstörungsfreie Prüfung / 8.5 Röntgenbildgebung | |
9 Komponentensicherheit | |
9 Komponentensicherheit / 9.4 Integrität von Schweißverbindungen | |
9 Komponentensicherheit / 9.6 Additive Fertigung metallischer Komponenten | |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | AISI 316L; Computed tomography; In-situ thermography; Laser powder bed fusion; Neutron diffraction; Pore formation; Residual stress; X-ray diffraction |
Themenfelder/Aktivitätsfelder der BAM: | Material |
Material / Additive Fertigung | |
Veranstaltung: | 2nd Workshop on In-situ Monitoring and Microstructure Development in Additive Manufacturing |
Veranstaltungsort: | Online meeting |
Beginndatum der Veranstaltung: | 19.04.2021 |
Enddatum der Veranstaltung: | 20.04.2021 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 17.06.2021 |
Referierte Publikation: | Nein |
Eingeladener Vortrag: | Nein |