Igniting volume of four ignition sources
- Several standardized ignition sources are used to determine the safety characteristics of gases, vapours and dusts. Standards indicate the source of ignition but vary in specifying other features such as the burning duration, energy or the volume in which the energy is released. Since heat is not visible under normal conditions, a schlieren technique was used to visualize the entire igniting volume and not just the flames. This article focuses on the igniting volume, compares it among the four standardized ignition sources and displays its relationship to the size of the test vessel. Differences in the ignition behaviour of the ignition sources might lead to the determination of erroneous safety characteristics and with that to the unsafe operation of processes.
Autor*innen: | Stefan SpitzerORCiD, V. Jankuj, K. Hecht, Arne Krietsch |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Process safety and environmental protection |
Jahr der Erstveröffentlichung: | 2023 |
Organisationseinheit der BAM: | 2 Prozess- und Anlagensicherheit |
2 Prozess- und Anlagensicherheit / 2.1 Sicherheit von Energieträgern | |
Herausgeber (Institution): | Institution of Chemical Engineers |
Verlag: | Elsevier |
Verlagsort: | Amsterdam |
Jahrgang/Band: | 170 |
Erste Seite: | 1200 |
Letzte Seite: | 1207 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurbau |
Freie Schlagwörter: | 20L-sphere; Exploding wire; Hybrid mixtures; Ignition sources |
Themenfelder/Aktivitätsfelder der BAM: | Infrastruktur |
DOI: | 10.1016/j.psep.2022.12.076 |
ISSN: | 0957-5820 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 24.01.2023 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 20.02.2023 |