Infrastruktur
Filtern
Erscheinungsjahr
- 2022 (23) (entfernen)
Dokumenttyp
Schlagworte
- Brückenbeläge (8)
- Asphaltbauweise (4)
- Fahrbahnübergänge (4)
- Asphaltbauweisen (3)
- PmB Schweißbahn (3)
- Schallemission (3)
- Spannstahlbruch (3)
- Technische Anforderungen (3)
- Alkali activation (2)
- Betonfahrbahndecke (2)
Organisationseinheit der BAM
- 7.1 Baustoffe (23) (entfernen)
Eingeladener Vortrag
- nein (6)
Diese Hinweisbroschüre erläutert allgemeine Planungsvoraussetzungen und Dimensionierungsregelungen, Baugrundsätze und Zulassungsbedingungen zur Anwendung innovativer Belagsdehnfugensysteme (Fahrbahnübergangskonstruktionen) in hochbeanspruchten Verkehrsflächen des Bundesfernstraßenbereiches. Alle planungsrelevanten, baustoffrelevanten, versuchstechnische, qualitätssichernden und baupraktischen Aspekte werden zur Unterstützung der Straßenbauverwaltungen, der Lieferfirmen und Ausführungsbetriebe erläutert. Die Veröffentlichung stellt eine technische Analyse aus Erfahrungssammlungen und Auswertung praktischer Erkenntnisse dar.
Beton ist weltweit einer der wichtigsten Konstruktionswerkstoffe und zeichnet sich durch eine enorme Anpassungsfähigkeit an sich verändernde Anforderungen aus. Damit verbunden ist eine hohe und kontinuierlich zunehmende Komplexität hinsichtlich der Ausgangsstoffe, Rezepturen und des Herstellungsprozesses. Folglich setzt eine Ausschöpfung des technischen und umweltbezogenen Potenzials der Betonbauweise höchste Expertise bei den Einzelakteuren der Bauindustrie voraus.
To prevent future alkali-aggregate reaction (AAR) damage, which has occurred frequently in the German highway network in recent years, a new regulation has been drafted. This regulation severely limits the use of alkali-sensitive aggregates by requiring that their suitability be verified by certified inspectors using newly developed AAR concrete tests that involve the external supply of alkali. This has led to a significant limitation in the number of aggregates usable for concrete pavements. A novel AAR avoidance strategy is now being pursued, which aims to enable the use of borderline alkali-sensitive aggregates through the application of an internal water-repellent treatment. The addition of water repellents during concrete production should significantly reduce the ingress of water and external de-icing salts into the concrete pavement, thus reducing the potential for AAR damage.
This paper presents the results of laboratory tests to assess the suitability of this new AAR prevention strategy. Representative, highly AAR-susceptible road paving concrete made with an alkali-sensitive greywacke and various water repellents were used as the basis for these experiments. The tests for concrete suitability included determining the conventional fresh and hardened concrete properties as well as concrete prism tests with external alkaline supply. Building on these results, laser-induced breakdown spectroscopy (LIBS) analyses of de-icing-salt intrusion as well as microscopic examinations for verification of the AAR characteristics were carried out.
The results of the AAR concrete tests with external alkaline supply support the conclusion that, when hydrophobic agents containing a suitable active ingredient are used, the AAR damage process in road paving concrete can be sufficiently prevented.
Earth buildings and adobe construction have been in use for thousands of years. Loam is locally available, environmentally friendly and has a small CO2 footprint mainly resulting from extraction and transport. Because of these reasons loam is one of the building materials of the future.
Water resistance is an important aspect when using loam as a construction material. If the structural option of building protruding roofs cannot be implemented, the water resistance of clay can be improved by stabilization.
Positive properties of the material should not be diminished by stabilization. For example, the desired regulation of air humidity, which however cannot be fully preserved by cement stabilization.
For an alternative and more appropriate stabilisation, different mixtures with calcined clays with alkali activator were examined. The calcination temperature for clays is usually lower than for cement and starts at 600° C. The calcined clays therefore also have a lower CO2 footprint compared to cement. To keep the mixture environmentally friendly potassium was used as alkali ion. It could be proven that the alkali activated polymer enhances water resistance of the loam mixture. Provided some further optimization the material shows potential to replace cement without compromising on the positive properties of clay.
The low calcination temperature for clays (600° C) and a low CO2 footprint compared to cement make them an interesting material. To find a stabilization method for loam using calcined clays, activation by alkalis was necessary. Therefore (and to keep the mixture environmentally friendly) KOH was used as alkali activator. It could be proven that the alkali activated polymer enhances water resistance of the loam mixture.
The fire-induced spalling behaviour of concretes has a huge effect on the fire resistance of concrete components. Therefore, fire performance must be taken into account in the design and dimensioning of concrete structures. The use of new types of concrete and different types of cement or binder must also be considered. Despite decades of research, the mechanisms underlying the spalling phenomenon are not yet fully understood. However, knowledge about these mechanisms is the prerequisite for predicting the spalling behaviour as accurately as possible.
Experimental research from material characterisation on the micro scale up to full-sized fire tests as well as the simulation and modelling of fire-induced damage processes offer the opportunity to investigate the spalling behaviour of concrete. Thereby, a variety of influencing parameters must be regarded. Against this background, the effect of avoidance strategies can be evaluated.
Since 2009, the International Workshop on Concrete Spalling due to Fire Exposure (IWCS) offers a platform to get in touch with researchers and practitioners, exchange the latest research results and newly acquired data from real fire scenarios, and discuss current developments in the field of concrete spalling. After the successful workshops in Leipzig (Germany), Delft (Netherlands), Paris (France), Borås (Sweden) and Sheffield (United Kingdom), the 7th International Workshop IWCS took place in Berlin at BAM. It provided insights into the work of two RILEM Technical Committees. Based on this, various results of screening tests and large-scale tests for the assessment of the fire-induced spalling behaviour of concretes were presented, taking into account a large number of influencing parameters. Further topics of the workshop were the analysis of the mechanisms for the spalling phenomenon as well as the modelling and simulation of the spalling processes. A large part of the workshop was devoted to the high-temperature behaviour of various types of concrete.
The workshop was dedicated to Prof. Diederichs, who passed away on 20 January 2022. With his death, the spalling community lost an internationally renowned expert in the field of fire behaviour of concrete and reinforced concrete components. He played a decisive role in the design of all previous RILEM TCs on the high temperature and fire behaviour of concretes and reinforced concrete components.