Nano
Filtern
Dokumenttyp
- Vortrag (338) (entfernen)
Sprache
- Englisch (293)
- Deutsch (42)
- Spanisch (2)
- Mehrsprachig (1)
Referierte Publikation
- nein (338)
Schlagworte
- Nanoparticles (41)
- VAMAS (29)
- Nano (28)
- Laser-induced periodic surface structures (LIPSS) (21)
- X-ray scattering (21)
- Electron microscopy (19)
- Fluorescence (16)
- Interlaboratory comparison (16)
- Particle size distribution (16)
- Quantum yield (15)
- Dye (14)
- Quality assurance (14)
- Standardisation (14)
- Nanomaterial (13)
- SAXS (13)
- MOUSE (12)
- Reference materials (12)
- Nanomaterials (11)
- Surface functionalization (11)
- X-ray photoelectron spectroscopy (11)
- XPS (11)
- Functionalized graphene (10)
- Lifetime (10)
- Nanoparticle (10)
- Reference material (10)
- SEM (10)
- Traceability (10)
- Conductivity (9)
- Ellipsometry (9)
- Graphene (9)
- Particle (9)
- Femtosecond laser (8)
- Inter-laboratory comparison (8)
- Method (8)
- Metrology (8)
- Nanocomposites (8)
- Sample preparation (8)
- AFM (7)
- EBSD (7)
- Imaging (7)
- Integrating sphere spectroscopy (7)
- Luminescence (7)
- Photoluminescence (7)
- Photophysics (7)
- Quantum dot (7)
- Quantum dots (7)
- Small angle scattering (7)
- Surface analysis (7)
- Boehmite (6)
- HAXPES (6)
- Lab automation (6)
- Methodology (6)
- NIR (6)
- OECD (6)
- Optical spectroscopy (6)
- Particle size (6)
- Quantitative spectroscopy (6)
- Scattering (6)
- Standardization (6)
- Thin films (6)
- Uncertainty (6)
- EDS (5)
- FIB (5)
- Geant4 (5)
- Ionic Liquid crystals (5)
- Lanthanide (5)
- MCS (5)
- Measurement uncertainty (5)
- Nanoconfinement (5)
- Nanocrystal (5)
- Oxygen evolution reaction (5)
- Quantification (5)
- Reference data (5)
- Rigid amorphous fraction (5)
- SWIR (5)
- Spectroscopic ellipsometry (5)
- Surface chemistry (5)
- 2D materials (4)
- Advanced Materials (4)
- Automation (4)
- BDS (4)
- Calibration (4)
- Data stewardship (4)
- Dynamics (4)
- Fast Scanning Calorimetry (4)
- Femtosecond laser ablation (4)
- Geant4-DNA (4)
- Glass transition (4)
- ISO/TC 202 (4)
- Mesoporous iridium oxide films (4)
- Microbeam analysis (4)
- Nano powder (4)
- Nano@BAM (4)
- Nanocomposite (4)
- Nanoelectronics (4)
- Nanopartikel (4)
- Nanostructure (4)
- Non-destructive operando analysis (4)
- Oxidation (4)
- Risk assessment (4)
- Semiconductor quantum dot (4)
- Silica (4)
- Simulation (4)
- Size (4)
- Standard (4)
- Synthesis (4)
- TMDSC (4)
- Upconversion (4)
- VSSA (4)
- Adsorbed Layer (3)
- Assay (3)
- Characterization (3)
- Core-shell nanoparticles (3)
- Correlative imaging (3)
- Electromagnetic scattering (3)
- Electron Microscopy (3)
- Flash DSC (3)
- ISO/TC 229 (3)
- Introduction (3)
- Knowledge Readiness Level (3)
- Laboratory management (3)
- Linearity (3)
- Method comparison (3)
- Microbeam Analysis (3)
- Monte Carlo (3)
- Monte-Carlo simulations (3)
- Nano particle (3)
- Nanomaterialien (3)
- Nanoparticle concentration (3)
- Nanosafety (3)
- Optical assays (3)
- Particle scattering simulations (3)
- Polymer (3)
- Prüfrichtlinie (3)
- Sensing (3)
- Sensor (3)
- Software (3)
- Strategic Research Agenda (SRA) (3)
- ToF-SIMS (3)
- Topas (3)
- Upconversion nanocrystal (3)
- Upconversion nanoparticle (3)
- Validation (3)
- nPSize (3)
- 3D (2)
- Advanced manufacturing (2)
- Advanced materials (2)
- Analysis (2)
- Applications (2)
- Atomic Force Microscopy (2)
- Automated synthesis (2)
- Brightness (2)
- Broadband dielectric spectroscopy (2)
- Bundesoberbehörden (2)
- CEN/TC 352 Nanotechnologies (2)
- CLS (2)
- Calcium sulfate (2)
- Capillary waves (2)
- Cathodoluminescence (2)
- Chemical composition (2)
- Cleavable probe (2)
- Commercial graphene (2)
- Conductometry (2)
- Correlative Imaging (2)
- Correlative analysis (2)
- Cycloalyphatic epoxy oligosiloxane (2)
- Data (2)
- Data organization (2)
- Desintegracion radioactiva (2)
- Diagnosis (2)
- Dielectric Spectroscopy (2)
- Dosimetry (2)
- EC4SafeNano (2)
- EMPIR (2)
- EMPIR 18HLT01 MetVesII (2)
- Ectrocatalysis (2)
- Elastomers (2)
- Elektronenmikroskopie (2)
- Epoxy (2)
- European Metrology Network (EMN) (2)
- Extracellular vesicles (EV) (2)
- Femtosecond laser processing (2)
- Flow cytometry (FCM) (2)
- Fluorescence standard (2)
- Fluorescent particles (2)
- Fourier transforms (2)
- Friction (2)
- Glass (2)
- Graphene inks (2)
- Graphene oxide (2)
- Graphene oxide flakes (2)
- Graphene related 2D materials (2)
- Growth Kinetics (2)
- Holistic experimental procedures (2)
- Holistic experimentation (2)
- Holistic science (2)
- ISO (2)
- ISO/TC 229 Nanotechnologies (2)
- InP (2)
- Indium phosphide (2)
- Industrial applications (2)
- Instrument calibration (2)
- Instrumentation (2)
- Interfaces (2)
- Interlaboratory Comparison (2)
- Interlaboratory Comparisons (2)
- Korrosion (2)
- Laboratory automation (2)
- Laser processing (2)
- Laser-induced periodic surface structures, LIPSS (2)
- Machine learning (2)
- Method validation (2)
- Micro- and nanoplastics (2)
- Microanalysis (2)
- Microdosimetry (2)
- Microscopy (2)
- Microstructure (2)
- Multiphoton lithography (2)
- Multiplexing (2)
- Método de Montecarlo (2)
- Nano- and microsensors (2)
- Nano-powder (2)
- Nanocharacterisation (2)
- Nanofasern (2)
- Nanopipettes (2)
- Nanoplastic (2)
- Nanoplastics (2)
- Nanopulver (2)
- Nanotechnology (2)
- OECD TG 124 (2)
- Oberflächenfunktionalisierung (2)
- Optical assay (2)
- Orientation (2)
- Particle scattering simulation (2)
- Particle surface analysis (2)
- Partikel (2)
- Partikelgrößenverteilung (2)
- Performance validation (2)
- Processing (2)
- Protein (2)
- Quantitative NMR (2)
- Quantum yields (2)
- Radioactive decay (2)
- Radioactive nanoparticle (2)
- Raman (2)
- Ratiometric sensors (2)
- Reference product (2)
- Regulation (2)
- Reliability (2)
- Reproducibility (2)
- Reproducibility crisis (2)
- Robotics (2)
- SAXS/WAXS (2)
- SOP (2)
- Scicat (2)
- Sensor molecules (2)
- SiO2 (2)
- Single particle spectroscopy (2)
- Size distribution (2)
- Small-angle X-ray scattering (2)
- Spectroscopic imaging ellipsometry (2)
- Spectroscopy (2)
- Standardisierung (2)
- Surface (2)
- Surface Analysis (2)
- Surface Group Analysis (2)
- Surface group analysis (2)
- Surface group quantification (2)
- Surfaces (2)
- Synchrotron (2)
- TEM (2)
- Test material (2)
- Thin Films (2)
- TiO2 (2)
- Titania nanoparticles (2)
- Titanium alloy (2)
- Transmission electron microscopy (2)
- Transparent Conductive Oxides (2)
- Ultrafast laser processing (2)
- WAXS (2)
- Wear (2)
- White light interference microscopy (2)
- X-ray Photoelectron Spectroscopy (2)
- nanoparticula (2)
- pH sensing (2)
- 100Cr6 (1)
- 2D flakes (1)
- 3d structuring (1)
- AFM based test methods (1)
- AFM-IR (1)
- AFM-Kraft-Abstand-Kurven (1)
- AIS (1)
- Absolute measurement (1)
- Absorption (1)
- Achsschenkel (1)
- Additiv (1)
- Additive (1)
- Additive manufacturing (1)
- Advanced Manufacturing (1)
- Agglomerates (1)
- Aging (1)
- Alloy 36 (1)
- Aluminium alloy (1)
- Amorphous silica particles (1)
- Analytical chemistry (1)
- Analytical methods (1)
- Analytical sciences (1)
- Analytische Zentrifuge (1)
- Anisotropy (1)
- Antibakterielle Oberflächen (1)
- Antioxydant (1)
- Application (1)
- Article concentration (1)
- Artificial Intelligence (1)
- Atomic force microscopy (1)
- Au nanodisks (1)
- Au nanoparticles (1)
- AuNP (1)
- Auger electron spectroscopy (1)
- Automated Image Analysis (1)
- Automated analysis (1)
- Automated assay (1)
- Autonomous Materials Discovery (1)
- BAM Academy (1)
- BET (1)
- BMU (1)
- Bacteria repellent surfaces (1)
- Bacterial adhesion (1)
- Bacterial adhesion tests (1)
- Barcoding (1)
- Base damage (1)
- Base loss (1)
- Bead (1)
- Bessel-Strahlen (1)
- Bimodal (1)
- Bio-based concrete (1)
- Biofilm formation (1)
- Biofilm growth (1)
- Biofilme (1)
- Brownsche Molekularbewegung (1)
- Bruchmechanische Auslegung (1)
- Böhmit (1)
- C++ (1)
- CE-ICP-MS (1)
- Cancer (1)
- Cancer treatment (1)
- Case studies (1)
- Catalogue of Services (CoS) (1)
- Causes leading to scientific misconduct (1)
- Cell (1)
- Cement (1)
- Certification (1)
- Certified Referencematerial (1)
- Certified reference materials (1)
- Cetrifugal Liquid Sedimentation CLS (1)
- Chemical admixtures (1)
- Chemical analysis (1)
- Chemometric analysis (1)
- Cleavable probes (1)
- Cmake (1)
- Coating (1)
- Coatings (1)
- Comparison (1)
- Complementary methods (1)
- Computed tomography (1)
- Computertomographie (1)
- Contact resonance (1)
- Converter marterial (1)
- Core-shell nanoparticle (1)
- Core-shell structures (1)
- Core/shell nanoparticle (1)
- Correlative Spectroscopy (1)
- Corrosion (1)
- Cr(III) complex (1)
- Critical strain (1)
- Crystallization (1)
- Cubical Iron Oxide (1)
- Curing (1)
- Curve fitting (1)
- Cytotoxicity (1)
- DLS (1)
- DMAS (1)
- DNA (1)
- DNA radiation damage (1)
- DNA structures (1)
- DSC (1)
- Data Fusion (1)
- Data Management (1)
- Data analysis (1)
- Data analysis round robin (1)
- Data catalog (1)
- Data corrections (1)
- Data curation (1)
- Data management (1)
- Data manipulation (1)
- Data pipelines (1)
- Data processing (1)
- Data provenance (1)
- Data stewartship (1)
- Data visualisation (1)
- Databases (1)
- Datenfusion (1)
- Debian (1)
- Defect Analysis (1)
- Demonstration (1)
- Density (1)
- Depth profiling (1)
- Diclofenac (1)
- Differential scanning calorimetry (1)
- Diffraction (1)
- Digital laboratory (1)
- Digitalisation (1)
- Digitalisierung (1)
- Digitalization (1)
- Diopside (1)
- Direct damage (1)
- Dispersion process (1)
- Dissociative electron attachment (DEA) (1)
- Dissociative electron transfer (DET) (1)
- Doping (1)
- Double-strand break (DSB) (1)
- Durability (1)
- Dyad molecules (1)
- Dye labeling (1)
- Dünne Schichten (1)
- E. coli (1)
- EDS-TM002 (1)
- EDX (1)
- EPMA (1)
- ESCA (1)
- EU (1)
- Elastomer (1)
- Electrical Paramters (1)
- Electrical Properties (1)
- Electrical properties (1)
- Electrical thin layers (1)
- Electrocatalysis (1)
- Electrocatalytic Water Splitting (1)
- Electrochemical Titration (1)
- Electromagnetic radiation (1)
- Electron Probe Microanalysis (1)
- Electrospun fibers (1)
- Elektronisches Laborbuch (1)
- Ellipsometric porosimetry (1)
- Ellipsometrie (1)
- Encoding (1)
- Endpoints (1)
- Energiedissipation im Kontakt (1)
- Energy deposit (1)
- Energy dispersive X-ray spectroscopy (1)
- Energy materials (1)
- Energy transfer (1)
- Engineered Nanomaterials (1)
- Engineered nanomaterials (1)
- Epoxy nanocomposites (1)
- Epoxy-Anhydrid Duroplast (1)
- European Centre (1)
- European Metrology Networks (EMNs) (1)
- Experiment tracking (1)
- Experimental traceability (1)
- Extracellualr vesicles (1)
- FAIR (1)
- Fail-safe (1)
- FeNi nanoparticles (1)
- Field of view (1)
- Finite-difference time-domain calculations (1)
- Finite-difference time-domain calculations (FDTD) (1)
- Fityk (1)
- Flame retardant (1)
- Flow cytometry (1)
- Fluorescence microscopy (1)
- Fluorescence quantum yield (1)
- Fluorescent glasses (1)
- Fluorescent indicator (1)
- Focused Ion Beam (1)
- Force distance curve (1)
- Forschungsstrategie (1)
- Fourier Transform (1)
- Free electron laser (1)
- Free electron laser (FEL) (1)
- Functionalized Nanomaterials (1)
- Functionalized nano- and microparticles (1)
- Functionalized silica and polymeric particles (1)
- G5P (1)
- Gallium doping (1)
- Git (1)
- Glow-discharge optical emission spectroscopy (1)
- Glue (1)
- Gold (1)
- Granulometrie (1)
- Graphene funcionalisation (1)
- Graphene powder (1)
- Graphene related materials (1)
- Grenzfläche als Material (1)
- Größe (1)
- Größenbestimmung (1)
- Guideline (1)
- HEA (1)
- Halloysite nanotubes (1)
- Hard X-ray photoelectron spectroscopy (1)
- Hard X-ray photoelectron spectroscopy (HAXPES) (1)
- Hard-energy X-ray photoelectron spectroscopy (1)
- High resolution (1)
- High-resolution transmission electron microscopy (1)
- High-throughput (1)
- High-throughput measurements (1)
- History (1)
- Holistic experiment approaches (1)
- Homogeneous deposition (1)
- Hybrid metrology (1)
- Hydrated DNA (1)
- Hydrated electron (1)
- Hydration shell (1)
- Hydrodynamics (1)
- Hydrogen Generation (1)
- Hydroxyl radical (1)
- Hygiene (1)
- Hyperspectral imaging (1)
- ICP-MS (1)
- ILC (1)
- IR (1)
- ISO/TC 201 (1)
- ISO/TC229 (1)
- ISOGScope (1)
- ImAFM (1)
- Image Segmentation (1)
- Image analysis (1)
- Image manipulation (1)
- Imaging Ellipsometry (1)
- Imaging ellipsometry (1)
- In situ Atomic Force Microscopy (AFM) (1)
- Indirect damage (1)
- Instrument automation (1)
- Instrumentation utilization (1)
- Inter-laboratory comparisons (1)
- Intercomparability (1)
- Interlaboratory (1)
- Interlaboratory comparisons (1)
- Interpenetrating polymer network (1)
- Ionic liquid (1)
- Ionisation (1)
- Ionization (1)
- Iridium oxide (1)
- Iron oxide nanoparticles (1)
- JNP (1)
- Kerbschlagarbeit (1)
- Knowledge (1)
- Korrelation (1)
- Kunststoff (1)
- LEE (1)
- LIPSS (1)
- LLG (1)
- Laboratory methodology (1)
- Large number of participants (1)
- Laser Metal Deposition (LMD) (1)
- Laser ablation (1)
- Laser technology (1)
- Laser-Materialbearbeitung (1)
- Laser-induced Periodic Surface Structures (LIPSS) (1)
- Laser-induced amorphization (1)
- Laser-induced periodic surface structueres (LIPPS) (1)
- Laser-induced periodic surface structures (1)
- Laser-induzierte periodische Oberflächen-Nanostrukturen (1)
- Laser-induzierte periodische Oberflächenstrukturen (1)
- Lateral dimensions (1)
- Latex (1)
- Layer Materials (1)
- Layer system (1)
- Leichtbau (1)
- Lichtstreuung (1)
- Life sciences (1)
- Ligand (1)
- Ligand quantification (1)
- Ligands (1)
- Linux (1)
- Low energy electrons (1)
- Lubricant additives (1)
- Lubricants (1)
- Lubrication (1)
- Machine Learning (1)
- Magnetic nanoparticle (1)
- Mass spectrometry (1)
- Materials and Processes Data Reusability (1)
- Matter reorganization (1)
- McSAS3 (1)
- Measurement science (1)
- Mesoporous (1)
- Mesoporous Materials (1)
- Mesoporous iridium-titanium mixed oxides (1)
- Metadata (1)
- Metadata collection (1)
- Metadata structuring (1)
- Metal organic frameworks (1)
- Metal-organic frameworks (1)
- Method development (1)
- Methodology development (1)
- Methos comparision (1)
- Metrics (1)
- Metrological traceability (1)
- Micro- and Nanoplastics (1)
- Microfluidics (1)
- Micromagnetism (1)
- Micropatterning (1)
- Microplastic reference materials (1)
- Microprinting (1)
- Mie resonances (1)
- Mikrostrukturen (1)
- Modelling (1)
- Molecular Mobility (1)
- Molecularly Imprinted Polymers (1)
- Monte-Carlo simulation (1)
- Morphology (1)
- Multi-scale (1)
- Multicolored (1)
- Multifunctional nanoparticles (1)
- Multiphoton Lithography (1)
- Multiphoton laser structuring (1)
- Mussel inspired materials (1)
- NAP-XPS (1)
- NFDI (1)
- NMR (1)
- Nano Characterisation (1)
- Nano characterization (1)
- Nano material (1)
- Nano screening (1)
- Nano-related data (1)
- Nano-risk assessment (1)
- NanoSolveIT (1)
- Nanoanalysis (1)
- Nanoanalytics (1)
- Nanocarrier (1)
- Nanokomposit (1)
- Nanomaterial properties (1)
- Nanoparticles Synthesis and Characterization (1)
- Nanoplattform (1)
- Nanorisk (1)
- Nanorisk Governance (1)
- Nanosafety services (1)
- Nanoscale (1)
- Nanoscale luminescent reporters (1)
- Nanoscale measurements (1)
- Nanosilver (1)
- Nanostructural analysis (1)
- Nanostructure investigation (1)
- Nanostructure quantification (1)
- Nanostructures (1)
- Nanostrukturen (1)
- Nanotechnologie (1)
- Nanotoxicity (1)
- Native oxide layer (1)
- Natural rubber (1)
- Near ambient pressure xray photo electron spectroscopy (1)
- Net-ionization reaction (1)
- Neuartige Materialien (1)
- Neural Networks (1)
- Next Generation Sequencing (1)
- Nichtrostender Stahl (1)
- Niobium (1)
- Nnano particle (1)
- Noble metal nanoparticles (1)
- Non-spherical shape (1)
- Normung (1)
- Nucleation (1)
- OECD TG (1)
- OECD TG 125 (1)
- OH radical (1)
- OOMMF (1)
- Oberflächenanalytik (1)
- Oberflächenintegrität (1)
- Oberflächenmesstechnik (1)
- Oberflächenmodifikation (1)
- Oberflächenpotential (1)
- Oberflächensteifigkeit (1)
- Ontologies (1)
- Operating Procedure (1)
- Optical Spectroscopy (1)
- Optical flow (1)
- Optical measurements (1)
- Optical probes (1)
- Optical scattering (1)
- Oxygen (1)
- Oxygen sensing (1)
- PAG (1)
- PC characterisation (1)
- PEG (1)
- PES (1)
- PH probe (1)
- Paint (1)
- Paper mills (1)
- Parameter correlation. (1)
- Participatory Approach (1)
- Particle Synthesis (1)
- Particle number concentration (1)
- Particle scattering (1)
- Particle sensors (1)
- Particle size determination (1)
- Particle, imaging (1)
- Partikeldurchmesser (1)
- Partikelgröße (1)
- Partikelgrößenbestimmung (1)
- Partikelkonzentration (1)
- Passivation shell (1)
- Peptide Library (1)
- Peptides (1)
- Performance check (1)
- Phage Display (1)
- Phase transitions (1)
- Phosphor (1)
- Photocuring (1)
- Photodynamic therapy (1)
- Photon bunching (1)
- Photoresist (1)
- Pigments (1)
- Pitfalls (1)
- Plastic reference materials (1)
- Plastikstrategie (1)
- Pollutant (1)
- Polydopamine (1)
- Polyethylene Glycol (1)
- Polymer blends (1)
- Polymer foils (1)
- Polymer nanocomposites (1)
- Polysaccharides (1)
- Porosity (1)
- Power Electronics (1)
- Power electronics (1)
- Practical aspects (1)
- Pre-standardisation (1)
- Prehydrated electron (1)
- Preparation (1)
- Presolvated electron (1)
- Probe (1)
- Prürfrichtlinie (1)
- Pump-probe (1)
- Pycnometry (1)
- Quality assurcance (1)
- Quality control (1)
- Quantum Yields (1)
- Quarzglas (1)
- Quasi-direct damage (1)
- REACH (1)
- ROS (1)
- Radiation damage (1)
- Radiation therapy (1)
- Radical (1)
- Radioactive NP (1)
- Radiolysis (1)
- Radiotherapy (1)
- Reactive oxygen species (1)
- Recycling (1)
- Recycling-by-design (1)
- Reference methods (1)
- Reference procedures (1)
- Reference products (1)
- Reference standards (1)
- Referenzdaten (1)
- Regional workshop (1)
- Reibungsreduktion (1)
- Reinforcement (1)
- Release kinetics (1)
- Reliabiilty (1)
- Research Data Management (1)
- Rheology (1)
- Risk Governance (1)
- Risstrajektorie (1)
- Robotic synthesis (1)
- Robotic-supported synthesis (1)
- Round robin (1)
- Rreference material (1)
- Rubber (1)
- Röntgenrefraktion (1)
- SDLs (1)
- SIMS (1)
- SKPM (1)
- SMPS (1)
- STEM-in-SEM (TSEM) (1)
- Saccharide sensing (1)
- Safe-by-Design (1)
- Safe-by-design (1)
- Safety (1)
- Sample peparation (1)
- Saphir (1)
- Saxs (1)
- Scannig probe microscope (1)
- Scanning Electron Microscopy (1)
- Scanning Kelvin Probe Force Microscopy (SKPFM) (1)
- Scanning Probe methods (1)
- Scanning probe measurements (1)
- Schmiermittel (1)
- Scientific misconduct (1)
- Screening (1)
- Self-driving Labs (1)
- Semantic Interoperability (1)
- Semiconductor materials (1)
- Semiconductur (1)
- Sensors (1)
- Shape (1)
- Silane (1)
- Silica and Polystyrene Particles (1)
- Silica and polystyrene nanoparticles (1)
- Silica particles (1)
- Silicon (1)
- Silicon nanoparticles (1)
- Simulations (1)
- Single cell-ICP-ToF-MS (1)
- Single particle (1)
- Single particle-ICP-ToF-MS (1)
- Single-particle measurements (1)
- Single-strand break (SSB) (1)
- Single-stranded DNA-binding proteins (1)
- Small-Angle X-ray Scattering (1)
- Small-angle scattering (1)
- Small-angle x-ray scattering (1)
- Small-area XPS (1)
- Speciation analysis (1)
- Specific surface (1)
- Spektroskopie (1)
- Spezifische Oberfläche (1)
- Stability (1)
- Stakeholder (1)
- Standardarbeitsanweisung (1)
- Standardarbeitsanweisungen (1)
- Standardized check (1)
- Standards (1)
- Strain measurement (1)
- Structural characterisation (1)
- Superconductivity (1)
- Surface Analytics (1)
- Surface Modification (1)
- Surface functional group quantification (1)
- Surface group (1)
- Surface modification (1)
- Surface modified nano- and microparticles (1)
- Surface morphology (1)
- Surface morphology and chemistry (1)
- Surface oxidation (1)
- Sustainability (1)
- Sustainable-by-Design (1)
- Synthesis library (1)
- TGA (1)
- TMDCs (1)
- TOPAS (1)
- TOPAS-nbio (1)
- Terminal functional groups (1)
- Test guideline (1)
- Theoretical modelling (1)
- Theranostics (1)
- Thermogravimetry (1)
- Thin Layers (1)
- Thin film analysis (1)
- Thin polymer films (1)
- Ti6Al4V alloy (1)
- TiAl64V (1)
- Time of Flight - Secondary ion mass spectrometry (1)
- Time-of-Flight Secondary Ion Mass Spectrometry (1)
- Time-of-flight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved analysis (1)
- Time-resolved coherent scattering (1)
- Time-resolved scattering (1)
- Titania (1)
- Titanium (1)
- Titanium oxide (1)
- Titration (1)
- ToF SIMS (1)
- Tools to combat scientific misconduct (1)
- Topas-nbio (1)
- Transition metal dichalcogenide (1)
- Transmission Kikuchi Diffraction (TKD) (1)
- Transmission electron microscopy (TEM) (1)
- Transparent conductive Oxides (1)
- Trinkwasser (1)
- Two photon polymerisation (1)
- Two-photon polymerisatio (1)
- UV-curing (1)
- Ultrakurzpuls-Laser (1)
- Ultrakurzpuls-Laserbearbeitung (1)
- Ultraschallunterstütztes Fräsen (1)
- Uncertainties (1)
- Upconversion nanoparticles (1)
- Verschleißreduktion (1)
- Viskosität (1)
- Werkstoffe (1)
- White light interferometric microscopy (1)
- Wide-bandgap semiconductors (1)
- Wirksumme (1)
- Workflows (1)
- X-Ray Spectroscopy (1)
- X-ray generation (1)
- X-ray instrumentation (1)
- X-ray spectrometer (1)
- X-ray spectroscopy (1)
- XRD (1)
- XRM (1)
- XUV scattering (1)
- Xray (1)
- Xray photo electron spectrocopy (1)
- attraktive Wechelwirkung (1)
- dispersion (1)
- electron microscopy (1)
- fluorescence standards (1)
- graphene related 2D materials (1)
- pH (1)
- particle size determination (1)
- qNMR (1)
- quality assurcance (1)
- sample preparation (1)
- single cell-ICP-ToF-MS (1)
- single particle-ICP-ToF-MS (1)
- surface group analysis (1)
- synthesis (1)
- Äquivalenzdurchmesser (1)
Organisationseinheit der BAM
- 6 Materialchemie (240)
- 6.1 Oberflächen- und Dünnschichtanalyse (143)
- 1 Analytische Chemie; Referenzmaterialien (63)
- 1.2 Biophotonik (56)
- 6.6 Physik und chemische Analytik der Polymere (38)
- 6.5 Synthese und Streuverfahren nanostrukturierter Materialien (37)
- 6.2 Material- und Oberflächentechnologien (34)
- 5 Werkstofftechnik (24)
- 4 Material und Umwelt (21)
- 5.4 Multimateriale Fertigungsprozesse (17)
Die gemeinsame Forschungsstrategie der Bundesoberbehörden zur Nanotechnologie wurde 2016 veröffentlicht. Die darin enthaltenen Aufgaben wurden von den Bundesoberbehörden vielfältig bearbeitet. Diese Präsentation gibt einen Überblick über die Projekte, die von der BAM bis 2019 bearbeitet wurden/werden und sich in den Rahmen der Forschungsstrategie einordnen.
Ensuring the purity of air and water is essential for the overall well-being of life on earth and the sustainability of the planet's diverse ecosystems. To achieve the goal of zero pollution, as outlined in the 2020 European Green Deal by the European Commission,[1] significant efforts are in progress. A key aspect of this commitment involves advancing more efficient and economically viable methods for treating wastewater. This includes the systematic monitoring of harmful pollutants such as heavy metals, microplastics, pesticides, and pharmaceuticals.
One example is the presence of the anti-inflammatory drug diclofenac in water systems, primarily originating from its use as a gel or lotion for joint pain treatment. Diclofenac contamination in surface waters has been detected at approximately 10 μg L-1 (0.03 μM)[2] which is not solely due to widespread usage but also because of the drug's resistance to microbial degradation. Conventional wastewater treatment plants (WWTPs), which rely on biodegradation, sludge sorption, ozone oxidation, and powdered activated carbon treatment, struggle to efficiently remove diclofenac from wastewater.[3],[4] For instance, to enable WWTPs to efficiently monitor and optimize their processes, it would be advantageous to develop on-site detection and extraction methods for persistent pharmaceutical residues in aqueous samples.
In this work, a sol-gel process was used to prepare Nile blue-doped silica nanoparticles (dSiO2-NPs) with a diameter of ca. 30 nm that were further functionalized to enable reversible-addition-fragmentation chain-transfer (RAFT) polymerization. To achieve fluorescence detection, a fluorescent monomer was used as a probe for diclofenac in ethyl acetate, generating stable complexes through hydrogen bond formation. The diclofenac/fluorescent monomer complexes were imprinted into thin molecularly imprinted polymer (MIP) shells on the surface of the dSiO2-NPs. Thus, the MIP binding behaviour could be easily evaluated by fluorescence titrations to monitor the spectral changes upon addition of the analyte. Doping the core substrate with Nile blue generates effective dual fluorescent signal transduction. This approach does not solely depend on a single fluorescence emission band in response to analyte recognition. Instead, it enables the fluorescent core to function as an internal reference, minimizing analyte-independent factors such as background fluorescence, instrumental fluctuation, and operational parameters.[5] Rebinding studies showed that the MIP particles have excellent selectivity towards the imprinted template and good discrimination against the competitor ibuprofen, with a discrimination factor of 2.5. Additionally, the limit of detection was determined to be 0.6 μM. Thus, with further optimization of the MIP, there is potential for the development of a MIP-based biphasic extract-&-detect fluorescence assay for simple, sensitive and specific sensing of diclofenac in aqueous samples down to the required concentrations of 0.03 μM.
Anhand der Wirksumme ist eine Abschätzung des legierungsabhängigen Einflusses auf den Korrosionswiderstand gegen chloridhaltige Medien möglich. Die berechneten Werte sind nur bei optimaler Wärmebehandlung und Verarbeitung zutreffend.
Die Anwendung einer einfachen Formel unter Berücksichtigung von Chrom, Molybdän und Stickstoff ist in der Regel völlig ausreichend. Das daraus abgeleitete Ranking von Werkstoffen ist für diverse technische Regelwerke und zur Unterstützung der Werkstoffauswahl geeignet.
Für die Warenein-/Ausgangskontrolle ist die alleinige Feststellung der Wirksumme unzureichend. Ergänzende Korrosionsuntersuchungen/-prüfungen zur Beschreibung des Korrosionswiderstandes sind dafür notwendig. Gleiches gilt für die Beurteilung von Schadensfällen. Hier sind Verarbeitung, Einsatzbedingungen und die Konstruktion von ausschlaggebender Bedeutung.
A summery of previous research regarding surface crystallization is given as well as results regarding thecurrent DFG project are presented.
Before industrial grade graphene could reach comparable quality to the controlled laboratory scale material, many challenges must be overcome. In order to bridge the gap between lab-scale and industrial-scale production is necessary to develop processes, equipment and measurement procedures to control the material features. One of the most crucial reasons of graphene’s limited commercialization is the lack of standard procedures to properly characterize and define the material chemical and structural properties down to the nanometer level. This leads to many issues regarding material synthesis repeatability, inappropriateness choice of measurands and measurement reproducibility which heavily affect the consistency of the material performance. For example, among all the different industrially produced real-world graphene, it is crucial to determine how many layers of graphene build the material. Products that are built by more than 10 layers should be more correctly referred as nanosized graphite, a problem that is often regarded as the “fake graphene” issue.
In our study, a comparative analysis is performed on two different series (G5 and G6) of industrial graphene powders, each series produced with four types of functionalization: raw graphene, oxygen-functionalized, nitrogen-functionalized and fluorine-functionalized. All the 8 sample variants were analyzed from a chemical and morphological point of view in the form of powders prepared as slightly pressed in metallic sample holders.
The results of the comparative chemical analyses XPS and EDS show a good agreement in the concentration values for all the elements present in the samples, despite the different analysis volumes addressed by the two techniques. For this reason, the samples can be considered homogeneous in both lateral and vertical direction.
A clear influence of the morphology on the composition is evident. Therefore, such correlative measurements of morphology and composition are necessary for a comprehensive characterization of industrial graphene flakes. Protocols for reliable characterization of industrial graphene flakes are in progress.
Since its discovery, graphene has got growing attention in the industrial and application research due to its unique properties . However, graphene has not been yet implemented into the industrial market, in particularly due to the difficulty of properly characterizing this challenging material. As most of other nanomaterials, graphene’s properties are closely linked to its chemical and structural properties, such as number of layers, flake thickness, degree of functionalisation and C/O ratio. For the commercialization, suitable procedures for the measurement and characterization of the ultrathin flakes, of lateral dimensions in the range from µm to tens of µm, are essential.Surface chemical methods, especially XPS, have an outstanding role of providing chemical information on the composition. Thereby, one well-known problem for surface analytical methods is the influence of contamination on the composition as in the case of adventitious carbon. The differentiation between carbon originated from the contamination or from the graphene sample itself is often not obvious, which can lead to altered results in the determination of the composition. To overcome this problem, Hard Energy X-ray Photoelectron Spectroscopy (HAXPES) offers new possibilities due to its higher information depth. Therefore, XPS measurement obtained with Al Kα radiation (E = 1486. 6 eV) were compared with analyses performed with a Cr Kα (E = 5414. 8 eV) excitation on functionalized graphene samples. Differences are discussed in terms of potential carbon contamination, but also of oxygen on the composition of the samples. Measurements are performed on O-, N- and F-functionalized graphene. Different preparation procedures (powder, pellet, drop cast from liquid suspension) will be also discussed, correlation of the results with the flakes morphology as well as their validation with other independent methods are in progress.
A comparative analysis is performed by XPS, HAXPES and SEM of industrial functionalised graphene powder of different morphology. The chemical analysis carried out by XPS, which probing depth is around 10nm, and HAXPES, which can reach up to 30nm probing depth. By combining these two techniques is possible to get a rough, non-destructive depth profiling of the sample's surface. The results show a higher concentration of the functionlisation elements on the surface of the sample and the influence of the morphology on the functionalisation process and the C/O ratio.
The presentation shows the results of the mini-interlaboratory comparison focused on the measurement of the morphology of graphene oxide flakes using scanning electron microscopy. In this work, a route for the sample preparation, SEM measurement and image analysis is proposed. The results of the image analysis, performed on 200+ flakes per sample, are presented by comparing the distributions of the size and shape descriptors calculated according to two different approaches. The influences of a different SEM measurement operator, analysis approach and analysis operator on the final size and shape distributions are highlighted.
Nanomaterials bring various benefits and have become a part of our daily lives. However, the risks emerging from nanotechnology need to be minimized and controlled at the regulatory level and therefore, there is a need for nanorisk governance. One of the prerequisites for successful nanorisk governance is the availability of high-quality data on nanomaterials and their impact with the human body and the environment. In recent decades, a countless number of publications and studies on nanomaterials and their properties have been produced due to the fast development of nanotechnology. Despite such a vast amount of data and information, there are certain knowledge gaps hindering an efficient nanorisk governance process. Knowing the state of the available data and information is an important requirement for any decision maker in dealing with risks. In the specific case of nanotechnology, where most of the risks are complex, ambiguous, and uncertain in nature, it is essential to obtain complete data and metadata, to fill knowledge gaps, and to transform the available knowledge into functional knowledge. This can become possible using a novel approach developed within the NANORIGO project (Grant agreement No. 814530) – the Knowledge Readiness Level (KaRL). In analogy to NASA’s Technology Readiness Levels (TRLs), we define KaRLs as a categorization system of data, information, and knowledge which enables transformation of data and information into functional knowledge for nanorisk governance. Our approach goes beyond the technical curation of data and metadata and involves quality and completeness filters, regulatory compliance requirements, nanorisk-related tools, and most importantly, human input (inclusion of all stakeholder groups). With the KaRL approach we also address key issues in nanotechnology such as societal and ethical concerns, circular economies and sustainability, the Green Deal, and the traceability of data, knowledge, and decisions. The KaRL approach could be used for nanorisk governance by a nanorisk governance council (NRGC), which is currently under development by three EU projects (NANORIGO, GOV4NANO, and RISKGONE).
Nanomaterials bring various benefits and have become a part of our daily lives. However, the risks emerging from nanotechnology need to be minimized and controlled at the regulatory level and therefore, there is a need for nanorisk governance. One of the prerequisites for successful nanorisk governance is the availability of high-quality data on nanomaterials and their impact with the human body and the environment. In recent decades, a countless number of publications and studies on nanomaterials and their properties have been produced due to the fast development of nanotechnology. Despite such a vast amount of data and information, there are certain knowledge gaps hindering an efficient nanorisk governance process. Knowing the state of the available data and information is an important requirement for any decision maker in dealing with risks. In the specific case of nanotechnology, where most of the risks are complex, ambiguous, and uncertain in nature, it is essential to obtain complete data and metadata, to fill knowledge gaps, and to transform the available knowledge into functional knowledge. This can become possible using a novel approach developed within the NANORIGO project (Grant agreement No. 814530) – the Knowledge Readiness Level (KaRL). In analogy to NASA’s Technology Readiness Levels (TRLs), we define KaRLs as a categorization system of data, information, and knowledge which enables transformation of data and information into functional knowledge for nanorisk governance. Our approach goes beyond the technical curation of data and metadata and involves quality and completeness filters, regulatory compliance requirements, nanorisk-related tools, and most importantly, human input (inclusion of all stakeholder groups). With the KaRL approach we also address key issues in nanotechnology such as societal and ethical concerns, circular economies and sustainability, the Green Deal, and the traceability of data, knowledge, and decisions. The KaRL approach could be used for nanorisk governance by a nanorisk governance council (NRGC), which is currently under development by three EU projects (NANORIGO, GOV4NANO, and RISKGONE).
Data quality is a vast term, which comprises the completeness, relevance (adequacy), and reliability of data. So far, many attempts to assure data quality have been pursued, and evaluation criteria for data quality have been established. One relatively novel but already well-known aspect of data quality refers to the concept of data FAIRness, which states that data should be: findable, accessible, interoperable and re-usable. In order to find, use, and access data, a user has to be guided properly. Such guidelines already exist for regulators and the scientific community. However, a ‘simple’ non-academic user from general society is very unlikely to be able to access or understand such data. Our objective in the H2020 project NANORIGO is to help and guide all types of users (i.e., scientists, regulators, industry workers, citizens, etc.) to access and make use of high-quality data and information from available and suitable data repositories in order to increase the transparency of and trust in nanotechnology.
Nanomaterials may have brought many beneficial innovations with them in our daily lives and and have become indispensable for the society. However, one needs to be concerned of the risks which are still unknown and not sufficietly studied and therefore there is a need for a nanorisk governance. At the core of nanorisk governance is gathering, processing and analysing reliable data which will be used for decision making. The challenge is to assure data reliability and transform it into knowledge. To address this challenge, we used analogy to technology readiness level (TRL) approach (developed by NASA), and elaborated knowledge readiness level (KaRL). KaRL is a nine-scale system to categorize data and knowledge (documents) into levels of readiness for particular purposes and to enhance readiness level by using quality and completeness filters, compliance requirements, nanorisk-related tools, stakeholders’ input. By our approach we addressed key issues in nanotechnology such as societal and ethical concerns, circular economy and sustainability, traceability of data, knowledge and decisions.
There is an urgent demand for reliable data on microplastic analysis, particularly on its physico-chemical properties as well as validated methodology to obtain such data. Through interlaboratory comparisons (ILCs) it becomes possible to assess accuracy and precision of methods by involving many laboratories around the world. At BAM, my tasks focused around organisation of an ILC on physico-chemical characterisation of microplastic detection methods under the international pre-standardisation platform VAMAS (www.vamas.org/twa45/) as Project 2 “Development of standardized methodologies for characterisation of microplastics with microscopy and spectroscopy methods” under the Technical Working Area TWA 45 “Micro and Nano Plastics in the Environment”.
With a proud number of 84 participants this ILC is able to provide superior statistical results. Thermoanalytical (Py-GC/MS and TED-GC/MS) and vibrational (µ-IR and µ-Raman) methods were asked for identification and quantification of microplastic test samples according to mass or particle number. Preliminary results indicate which methods show a higher accuracy and precision and reveal some sample preparation ideas which work best for microplastics characterisation. At the end of the ILC an overall plausibility of the results will be assessed.
To obtain reliable data on micro- and nanoplastics (MPs, NPs) BAM (Federal Institute for Materials Research and Testing) is organizing interlaboratory comparisons (ILCs). Main focus is detection and physico-chemical characterisation. The accuracy and precision of the results of different laboratories and comparability of the results among the participants are addressed. The ILCs will be performed in the following order: i) ILC #1: Detection and Characterisation of MPs (1-1000 µm) and ii) ILC #2: Detection and Characterisation of NPs (< 1 µm).
For the ILC #1 the parameters to be analysed are: particle size distribution, shape, mass content, particle concentration, with thermoanalytic (Py-GC/MS, TED-GC/MS) and spectroscopy (µ-Raman, µ-FTIR) methods. For the ILC #2 the parameters are: particle size distribution, shape, particle concentration, with methods such as spectroscopical (Raman), Electron Microscopies (SEM, AFM), etc. Exact measurands and methods are still under discussion. BAM will provide test materials of well-known stability and homogeneity. ILC participants will include partners of the CUSP (the European research cluster to understand the health impacts of micro- and nanoplastics), and any other institutions over the world. The ILCs will take place under the international pre-standardisation platform VAMAS, new Technical Working Area 35 “Micro and Nano Plastics in the Environment” (http://www.vamas.org/twa45/).
In this presentation we demonstrate the importance of physico-chemical properties (pc) of micro- and nanoplastic particles (MNPs). These properties determine interaction between MNPs and cells or living organisms. To perform accurate experiments for acquiring pc information it is essential to develop well-characterized and understood plastic reference materials. Such reference materials can be used in interlaboratory comparisons (ILCs). BAM is organizing under VAMAS two ILCs, on micro- and nanoplastics to obtain reliable results and methodologies for pc characterization of MNPs. By gaining profound knowledge on pc properties it becomes possible to estimate the impact of MNPs on the humans and environment and therefore to translate the knowledge to the level of regulation.
The research carried out at the Laboratory of Spectroscopy of Functional Materials at IFSC/USP, in Brazil, is focused on the synthesis and structural-property correlation of luminescent materials including rare-earth (RE) doped glasses, ceramics and hybrid host-guest materials. For the past five years, we have been particularly interested in the development of single- and multifunctional nanosystems based on core-shell upconversion nanoparticles (UCNP) associated with dyes, organometallic complexes and other organic molecules, for biophotonic and sensing applications. In these systems, we take advantage of energy transfer between the UCNPs and the molecules to either supress or enhance luminescent response. Examples include the possibility of bioimaging and photodynamic therapy of bacteria and cancer cells, simultaneous magnetothermia and thermometry, localized O2 sensing, fast detection and quantification of biological markers (e.g. kidney disease) and microorganisms. On what concerns the development of luminescent sensors - a recently started project, our aim is to develop paper-based platforms for point-of-care devices. In this presentation, an overview of our contributions for the past years and our future aims will be presented with several examples.
Es werden erzielte Ergebnisse des ultraschallunterstützen Schlichtfräsens einer schwer spanbaren FeNi-Legierung vorgestellt. Dabei wird der Einfluss der Amplitude der Ultraschallunterstützung auf die Zerspankraft sowie die Oberflächenintegrität untersucht, wobei ein besonderer Fokus auf die Passivkraft gelegt wird. Die Ultraschallunterstützung bedingt beim Schlichtfräsen der Alloy 36 im Vergleich zum konventionellen Fräsprozess eine signifikante Reduzierung der resultierenden Zerspankraft sowie der Rauheit. Außerdem werden oberflächennahen Druckeigenspannungen induziert. Eine Angehobene Osziallations-Amplitude beim ultraschallunterstützten Fräsen bewirkt eine Erhöhung des Anteils der Passivkraft an der resultierenden Zerspankraft sowie eine Erhöhung der oberflächennahen Druckeigenspannungen und eine Verringerung von Oberflächendefekten und Rauheitskennwerten.
Ellipsometry as optical metrology method for analysis of reference materials for nanoelectronics
(2024)
Electrical properties of materials at the nanoscale can be characterized using scanning microwave microscopes (SMM) and conductive atomic force microscopes (C AFM). However, the measurement results are difficult to compare since different setups and different reference standards are used. The development of new “out-of-lab” reference standards can contribute to the traceability and reliability of these scanning probe microscopy methods (SPM) and facilitate their broader industrial application.
In this study, we discuss the capability of optical methods such as ellipsometry for the characterization of existing and the development of new reference calibration samples for scanning microwave microscopy. Ellipsometry is a fast and non-destructive method, which enables very accurate determination of the layer thickness and the dielectric functions of the materials. Imaging ellipsometry is suitable for spatially resolved measurements when analyzing thin layers in microstructured samples.
We show how the electrical resistivity of indium tin oxide (ITO) layers in newly designed resistive calibration samples can be obtained from spectroscopic ellipsometric measurements. The extension of the measurement range into the mid-infrared region was necessary when analyzing ITO layers with low conductivity. This parameter was obtained by fitting a Drude function describing the absorption of the free carriers. The impact of the coating process conditions on the layer properties is discussed.
Imaging ellipsometry was applied for the characterisation of thin ITO and SiO2 layers in microstructured resistive and capacitance calibration kits. The uncertainties of determined layer thicknesses were specified according to standardized practice guides used in ellipsometry. We show how statistical fingerprint analysis of the measured ellipsometric transfer quantities can be used to validate the quality of potential reference materials for nano-electronics and to monitor the processing of structured samples.
Ellipsometry is a very powerful tool used for accurate material investigation in a wide wavelength range. It is a non-destructive and fast method. Imaging ellipsometry as a combination of optical microscopy and ellipsometry enables spatially resolved measurements when determining the layer thickness and dielectric properties of thin layers. It is known for its high polarisation sensitivity and high contrast for the surface structures. In this contribution we show the application of the imaging ellipsometry for detection of defects in energy materials and quality validation of possible reference materials for nano-electronics.
Defects in wide bandgap semiconductors, in homoepitaxial SiC and heteroepitaxial GaN layers on transparent SiC substrates, can be successfully detected and classified by means of imaging ellipsometry. Correlation of imaging ellipsometry results with results from complementary techniques such as white light interference microscopy as well as atomic force microscopy contribute to understanding of surface topography and defect formation mechanisms. We discuss the potential of different methods for analysing ellipsometric map data for monitoring the defect densities.
Electric properties of materials at the nanoscale can be investigated by means of scanning probe microscopy methods such as scanning microwave microscopy and conductive atomic force microscopy. However, development of new robust and easy-to-use calibration methods and calibration standards is essential to increase the traceability of these methods and allow their broad application in industry. We show how imaging spectroscopic ellipsometry can be used for development and monitoring of processing quality of patterned reference samples based on indium tin oxide (ITO) layer with different thickness and conductivity.