Nano
Filtern
Dokumenttyp
- Vortrag (338) (entfernen)
Sprache
- Englisch (293)
- Deutsch (42)
- Spanisch (2)
- Mehrsprachig (1)
Referierte Publikation
- nein (338)
Schlagworte
- Nanoparticles (41)
- VAMAS (29)
- Nano (28)
- Laser-induced periodic surface structures (LIPSS) (21)
- X-ray scattering (21)
- Electron microscopy (19)
- Fluorescence (16)
- Interlaboratory comparison (16)
- Particle size distribution (16)
- Quantum yield (15)
- Dye (14)
- Quality assurance (14)
- Standardisation (14)
- Nanomaterial (13)
- SAXS (13)
- MOUSE (12)
- Reference materials (12)
- Nanomaterials (11)
- Surface functionalization (11)
- X-ray photoelectron spectroscopy (11)
- XPS (11)
- Functionalized graphene (10)
- Lifetime (10)
- Nanoparticle (10)
- Reference material (10)
- SEM (10)
- Traceability (10)
- Conductivity (9)
- Ellipsometry (9)
- Graphene (9)
- Particle (9)
- Femtosecond laser (8)
- Inter-laboratory comparison (8)
- Method (8)
- Metrology (8)
- Nanocomposites (8)
- Sample preparation (8)
- AFM (7)
- EBSD (7)
- Imaging (7)
- Integrating sphere spectroscopy (7)
- Luminescence (7)
- Photoluminescence (7)
- Photophysics (7)
- Quantum dot (7)
- Quantum dots (7)
- Small angle scattering (7)
- Surface analysis (7)
- Boehmite (6)
- HAXPES (6)
- Lab automation (6)
- Methodology (6)
- NIR (6)
- OECD (6)
- Optical spectroscopy (6)
- Particle size (6)
- Quantitative spectroscopy (6)
- Scattering (6)
- Standardization (6)
- Thin films (6)
- Uncertainty (6)
- EDS (5)
- FIB (5)
- Geant4 (5)
- Ionic Liquid crystals (5)
- Lanthanide (5)
- MCS (5)
- Measurement uncertainty (5)
- Nanoconfinement (5)
- Nanocrystal (5)
- Oxygen evolution reaction (5)
- Quantification (5)
- Reference data (5)
- Rigid amorphous fraction (5)
- SWIR (5)
- Spectroscopic ellipsometry (5)
- Surface chemistry (5)
- 2D materials (4)
- Advanced Materials (4)
- Automation (4)
- BDS (4)
- Calibration (4)
- Data stewardship (4)
- Dynamics (4)
- Fast Scanning Calorimetry (4)
- Femtosecond laser ablation (4)
- Geant4-DNA (4)
- Glass transition (4)
- ISO/TC 202 (4)
- Mesoporous iridium oxide films (4)
- Microbeam analysis (4)
- Nano powder (4)
- Nano@BAM (4)
- Nanocomposite (4)
- Nanoelectronics (4)
- Nanopartikel (4)
- Nanostructure (4)
- Non-destructive operando analysis (4)
- Oxidation (4)
- Risk assessment (4)
- Semiconductor quantum dot (4)
- Silica (4)
- Simulation (4)
- Size (4)
- Standard (4)
- Synthesis (4)
- TMDSC (4)
- Upconversion (4)
- VSSA (4)
- Adsorbed Layer (3)
- Assay (3)
- Characterization (3)
- Core-shell nanoparticles (3)
- Correlative imaging (3)
- Electromagnetic scattering (3)
- Electron Microscopy (3)
- Flash DSC (3)
- ISO/TC 229 (3)
- Introduction (3)
- Knowledge Readiness Level (3)
- Laboratory management (3)
- Linearity (3)
- Method comparison (3)
- Microbeam Analysis (3)
- Monte Carlo (3)
- Monte-Carlo simulations (3)
- Nano particle (3)
- Nanomaterialien (3)
- Nanoparticle concentration (3)
- Nanosafety (3)
- Optical assays (3)
- Particle scattering simulations (3)
- Polymer (3)
- Prüfrichtlinie (3)
- Sensing (3)
- Sensor (3)
- Software (3)
- Strategic Research Agenda (SRA) (3)
- ToF-SIMS (3)
- Topas (3)
- Upconversion nanocrystal (3)
- Upconversion nanoparticle (3)
- Validation (3)
- nPSize (3)
- 3D (2)
- Advanced manufacturing (2)
- Advanced materials (2)
- Analysis (2)
- Applications (2)
- Atomic Force Microscopy (2)
- Automated synthesis (2)
- Brightness (2)
- Broadband dielectric spectroscopy (2)
- Bundesoberbehörden (2)
- CEN/TC 352 Nanotechnologies (2)
- CLS (2)
- Calcium sulfate (2)
- Capillary waves (2)
- Cathodoluminescence (2)
- Chemical composition (2)
- Cleavable probe (2)
- Commercial graphene (2)
- Conductometry (2)
- Correlative Imaging (2)
- Correlative analysis (2)
- Cycloalyphatic epoxy oligosiloxane (2)
- Data (2)
- Data organization (2)
- Desintegracion radioactiva (2)
- Diagnosis (2)
- Dielectric Spectroscopy (2)
- Dosimetry (2)
- EC4SafeNano (2)
- EMPIR (2)
- EMPIR 18HLT01 MetVesII (2)
- Ectrocatalysis (2)
- Elastomers (2)
- Elektronenmikroskopie (2)
- Epoxy (2)
- European Metrology Network (EMN) (2)
- Extracellular vesicles (EV) (2)
- Femtosecond laser processing (2)
- Flow cytometry (FCM) (2)
- Fluorescence standard (2)
- Fluorescent particles (2)
- Fourier transforms (2)
- Friction (2)
- Glass (2)
- Graphene inks (2)
- Graphene oxide (2)
- Graphene oxide flakes (2)
- Graphene related 2D materials (2)
- Growth Kinetics (2)
- Holistic experimental procedures (2)
- Holistic experimentation (2)
- Holistic science (2)
- ISO (2)
- ISO/TC 229 Nanotechnologies (2)
- InP (2)
- Indium phosphide (2)
- Industrial applications (2)
- Instrument calibration (2)
- Instrumentation (2)
- Interfaces (2)
- Interlaboratory Comparison (2)
- Interlaboratory Comparisons (2)
- Korrosion (2)
- Laboratory automation (2)
- Laser processing (2)
- Laser-induced periodic surface structures, LIPSS (2)
- Machine learning (2)
- Method validation (2)
- Micro- and nanoplastics (2)
- Microanalysis (2)
- Microdosimetry (2)
- Microscopy (2)
- Microstructure (2)
- Multiphoton lithography (2)
- Multiplexing (2)
- Método de Montecarlo (2)
- Nano- and microsensors (2)
- Nano-powder (2)
- Nanocharacterisation (2)
- Nanofasern (2)
- Nanopipettes (2)
- Nanoplastic (2)
- Nanoplastics (2)
- Nanopulver (2)
- Nanotechnology (2)
- OECD TG 124 (2)
- Oberflächenfunktionalisierung (2)
- Optical assay (2)
- Orientation (2)
- Particle scattering simulation (2)
- Particle surface analysis (2)
- Partikel (2)
- Partikelgrößenverteilung (2)
- Performance validation (2)
- Processing (2)
- Protein (2)
- Quantitative NMR (2)
- Quantum yields (2)
- Radioactive decay (2)
- Radioactive nanoparticle (2)
- Raman (2)
- Ratiometric sensors (2)
- Reference product (2)
- Regulation (2)
- Reliability (2)
- Reproducibility (2)
- Reproducibility crisis (2)
- Robotics (2)
- SAXS/WAXS (2)
- SOP (2)
- Scicat (2)
- Sensor molecules (2)
- SiO2 (2)
- Single particle spectroscopy (2)
- Size distribution (2)
- Small-angle X-ray scattering (2)
- Spectroscopic imaging ellipsometry (2)
- Spectroscopy (2)
- Standardisierung (2)
- Surface (2)
- Surface Analysis (2)
- Surface Group Analysis (2)
- Surface group analysis (2)
- Surface group quantification (2)
- Surfaces (2)
- Synchrotron (2)
- TEM (2)
- Test material (2)
- Thin Films (2)
- TiO2 (2)
- Titania nanoparticles (2)
- Titanium alloy (2)
- Transmission electron microscopy (2)
- Transparent Conductive Oxides (2)
- Ultrafast laser processing (2)
- WAXS (2)
- Wear (2)
- White light interference microscopy (2)
- X-ray Photoelectron Spectroscopy (2)
- nanoparticula (2)
- pH sensing (2)
- 100Cr6 (1)
- 2D flakes (1)
- 3d structuring (1)
- AFM based test methods (1)
- AFM-IR (1)
- AFM-Kraft-Abstand-Kurven (1)
- AIS (1)
- Absolute measurement (1)
- Absorption (1)
- Achsschenkel (1)
- Additiv (1)
- Additive (1)
- Additive manufacturing (1)
- Advanced Manufacturing (1)
- Agglomerates (1)
- Aging (1)
- Alloy 36 (1)
- Aluminium alloy (1)
- Amorphous silica particles (1)
- Analytical chemistry (1)
- Analytical methods (1)
- Analytical sciences (1)
- Analytische Zentrifuge (1)
- Anisotropy (1)
- Antibakterielle Oberflächen (1)
- Antioxydant (1)
- Application (1)
- Article concentration (1)
- Artificial Intelligence (1)
- Atomic force microscopy (1)
- Au nanodisks (1)
- Au nanoparticles (1)
- AuNP (1)
- Auger electron spectroscopy (1)
- Automated Image Analysis (1)
- Automated analysis (1)
- Automated assay (1)
- Autonomous Materials Discovery (1)
- BAM Academy (1)
- BET (1)
- BMU (1)
- Bacteria repellent surfaces (1)
- Bacterial adhesion (1)
- Bacterial adhesion tests (1)
- Barcoding (1)
- Base damage (1)
- Base loss (1)
- Bead (1)
- Bessel-Strahlen (1)
- Bimodal (1)
- Bio-based concrete (1)
- Biofilm formation (1)
- Biofilm growth (1)
- Biofilme (1)
- Brownsche Molekularbewegung (1)
- Bruchmechanische Auslegung (1)
- Böhmit (1)
- C++ (1)
- CE-ICP-MS (1)
- Cancer (1)
- Cancer treatment (1)
- Case studies (1)
- Catalogue of Services (CoS) (1)
- Causes leading to scientific misconduct (1)
- Cell (1)
- Cement (1)
- Certification (1)
- Certified Referencematerial (1)
- Certified reference materials (1)
- Cetrifugal Liquid Sedimentation CLS (1)
- Chemical admixtures (1)
- Chemical analysis (1)
- Chemometric analysis (1)
- Cleavable probes (1)
- Cmake (1)
- Coating (1)
- Coatings (1)
- Comparison (1)
- Complementary methods (1)
- Computed tomography (1)
- Computertomographie (1)
- Contact resonance (1)
- Converter marterial (1)
- Core-shell nanoparticle (1)
- Core-shell structures (1)
- Core/shell nanoparticle (1)
- Correlative Spectroscopy (1)
- Corrosion (1)
- Cr(III) complex (1)
- Critical strain (1)
- Crystallization (1)
- Cubical Iron Oxide (1)
- Curing (1)
- Curve fitting (1)
- Cytotoxicity (1)
- DLS (1)
- DMAS (1)
- DNA (1)
- DNA radiation damage (1)
- DNA structures (1)
- DSC (1)
- Data Fusion (1)
- Data Management (1)
- Data analysis (1)
- Data analysis round robin (1)
- Data catalog (1)
- Data corrections (1)
- Data curation (1)
- Data management (1)
- Data manipulation (1)
- Data pipelines (1)
- Data processing (1)
- Data provenance (1)
- Data stewartship (1)
- Data visualisation (1)
- Databases (1)
- Datenfusion (1)
- Debian (1)
- Defect Analysis (1)
- Demonstration (1)
- Density (1)
- Depth profiling (1)
- Diclofenac (1)
- Differential scanning calorimetry (1)
- Diffraction (1)
- Digital laboratory (1)
- Digitalisation (1)
- Digitalisierung (1)
- Digitalization (1)
- Diopside (1)
- Direct damage (1)
- Dispersion process (1)
- Dissociative electron attachment (DEA) (1)
- Dissociative electron transfer (DET) (1)
- Doping (1)
- Double-strand break (DSB) (1)
- Durability (1)
- Dyad molecules (1)
- Dye labeling (1)
- Dünne Schichten (1)
- E. coli (1)
- EDS-TM002 (1)
- EDX (1)
- EPMA (1)
- ESCA (1)
- EU (1)
- Elastomer (1)
- Electrical Paramters (1)
- Electrical Properties (1)
- Electrical properties (1)
- Electrical thin layers (1)
- Electrocatalysis (1)
- Electrocatalytic Water Splitting (1)
- Electrochemical Titration (1)
- Electromagnetic radiation (1)
- Electron Probe Microanalysis (1)
- Electrospun fibers (1)
- Elektronisches Laborbuch (1)
- Ellipsometric porosimetry (1)
- Ellipsometrie (1)
- Encoding (1)
- Endpoints (1)
- Energiedissipation im Kontakt (1)
- Energy deposit (1)
- Energy dispersive X-ray spectroscopy (1)
- Energy materials (1)
- Energy transfer (1)
- Engineered Nanomaterials (1)
- Engineered nanomaterials (1)
- Epoxy nanocomposites (1)
- Epoxy-Anhydrid Duroplast (1)
- European Centre (1)
- European Metrology Networks (EMNs) (1)
- Experiment tracking (1)
- Experimental traceability (1)
- Extracellualr vesicles (1)
- FAIR (1)
- Fail-safe (1)
- FeNi nanoparticles (1)
- Field of view (1)
- Finite-difference time-domain calculations (1)
- Finite-difference time-domain calculations (FDTD) (1)
- Fityk (1)
- Flame retardant (1)
- Flow cytometry (1)
- Fluorescence microscopy (1)
- Fluorescence quantum yield (1)
- Fluorescent glasses (1)
- Fluorescent indicator (1)
- Focused Ion Beam (1)
- Force distance curve (1)
- Forschungsstrategie (1)
- Fourier Transform (1)
- Free electron laser (1)
- Free electron laser (FEL) (1)
- Functionalized Nanomaterials (1)
- Functionalized nano- and microparticles (1)
- Functionalized silica and polymeric particles (1)
- G5P (1)
- Gallium doping (1)
- Git (1)
- Glow-discharge optical emission spectroscopy (1)
- Glue (1)
- Gold (1)
- Granulometrie (1)
- Graphene funcionalisation (1)
- Graphene powder (1)
- Graphene related materials (1)
- Grenzfläche als Material (1)
- Größe (1)
- Größenbestimmung (1)
- Guideline (1)
- HEA (1)
- Halloysite nanotubes (1)
- Hard X-ray photoelectron spectroscopy (1)
- Hard X-ray photoelectron spectroscopy (HAXPES) (1)
- Hard-energy X-ray photoelectron spectroscopy (1)
- High resolution (1)
- High-resolution transmission electron microscopy (1)
- High-throughput (1)
- High-throughput measurements (1)
- History (1)
- Holistic experiment approaches (1)
- Homogeneous deposition (1)
- Hybrid metrology (1)
- Hydrated DNA (1)
- Hydrated electron (1)
- Hydration shell (1)
- Hydrodynamics (1)
- Hydrogen Generation (1)
- Hydroxyl radical (1)
- Hygiene (1)
- Hyperspectral imaging (1)
- ICP-MS (1)
- ILC (1)
- IR (1)
- ISO/TC 201 (1)
- ISO/TC229 (1)
- ISOGScope (1)
- ImAFM (1)
- Image Segmentation (1)
- Image analysis (1)
- Image manipulation (1)
- Imaging Ellipsometry (1)
- Imaging ellipsometry (1)
- In situ Atomic Force Microscopy (AFM) (1)
- Indirect damage (1)
- Instrument automation (1)
- Instrumentation utilization (1)
- Inter-laboratory comparisons (1)
- Intercomparability (1)
- Interlaboratory (1)
- Interlaboratory comparisons (1)
- Interpenetrating polymer network (1)
- Ionic liquid (1)
- Ionisation (1)
- Ionization (1)
- Iridium oxide (1)
- Iron oxide nanoparticles (1)
- JNP (1)
- Kerbschlagarbeit (1)
- Knowledge (1)
- Korrelation (1)
- Kunststoff (1)
- LEE (1)
- LIPSS (1)
- LLG (1)
- Laboratory methodology (1)
- Large number of participants (1)
- Laser Metal Deposition (LMD) (1)
- Laser ablation (1)
- Laser technology (1)
- Laser-Materialbearbeitung (1)
- Laser-induced Periodic Surface Structures (LIPSS) (1)
- Laser-induced amorphization (1)
- Laser-induced periodic surface structueres (LIPPS) (1)
- Laser-induced periodic surface structures (1)
- Laser-induzierte periodische Oberflächen-Nanostrukturen (1)
- Laser-induzierte periodische Oberflächenstrukturen (1)
- Lateral dimensions (1)
- Latex (1)
- Layer Materials (1)
- Layer system (1)
- Leichtbau (1)
- Lichtstreuung (1)
- Life sciences (1)
- Ligand (1)
- Ligand quantification (1)
- Ligands (1)
- Linux (1)
- Low energy electrons (1)
- Lubricant additives (1)
- Lubricants (1)
- Lubrication (1)
- Machine Learning (1)
- Magnetic nanoparticle (1)
- Mass spectrometry (1)
- Materials and Processes Data Reusability (1)
- Matter reorganization (1)
- McSAS3 (1)
- Measurement science (1)
- Mesoporous (1)
- Mesoporous Materials (1)
- Mesoporous iridium-titanium mixed oxides (1)
- Metadata (1)
- Metadata collection (1)
- Metadata structuring (1)
- Metal organic frameworks (1)
- Metal-organic frameworks (1)
- Method development (1)
- Methodology development (1)
- Methos comparision (1)
- Metrics (1)
- Metrological traceability (1)
- Micro- and Nanoplastics (1)
- Microfluidics (1)
- Micromagnetism (1)
- Micropatterning (1)
- Microplastic reference materials (1)
- Microprinting (1)
- Mie resonances (1)
- Mikrostrukturen (1)
- Modelling (1)
- Molecular Mobility (1)
- Molecularly Imprinted Polymers (1)
- Monte-Carlo simulation (1)
- Morphology (1)
- Multi-scale (1)
- Multicolored (1)
- Multifunctional nanoparticles (1)
- Multiphoton Lithography (1)
- Multiphoton laser structuring (1)
- Mussel inspired materials (1)
- NAP-XPS (1)
- NFDI (1)
- NMR (1)
- Nano Characterisation (1)
- Nano characterization (1)
- Nano material (1)
- Nano screening (1)
- Nano-related data (1)
- Nano-risk assessment (1)
- NanoSolveIT (1)
- Nanoanalysis (1)
- Nanoanalytics (1)
- Nanocarrier (1)
- Nanokomposit (1)
- Nanomaterial properties (1)
- Nanoparticles Synthesis and Characterization (1)
- Nanoplattform (1)
- Nanorisk (1)
- Nanorisk Governance (1)
- Nanosafety services (1)
- Nanoscale (1)
- Nanoscale luminescent reporters (1)
- Nanoscale measurements (1)
- Nanosilver (1)
- Nanostructural analysis (1)
- Nanostructure investigation (1)
- Nanostructure quantification (1)
- Nanostructures (1)
- Nanostrukturen (1)
- Nanotechnologie (1)
- Nanotoxicity (1)
- Native oxide layer (1)
- Natural rubber (1)
- Near ambient pressure xray photo electron spectroscopy (1)
- Net-ionization reaction (1)
- Neuartige Materialien (1)
- Neural Networks (1)
- Next Generation Sequencing (1)
- Nichtrostender Stahl (1)
- Niobium (1)
- Nnano particle (1)
- Noble metal nanoparticles (1)
- Non-spherical shape (1)
- Normung (1)
- Nucleation (1)
- OECD TG (1)
- OECD TG 125 (1)
- OH radical (1)
- OOMMF (1)
- Oberflächenanalytik (1)
- Oberflächenintegrität (1)
- Oberflächenmesstechnik (1)
- Oberflächenmodifikation (1)
- Oberflächenpotential (1)
- Oberflächensteifigkeit (1)
- Ontologies (1)
- Operating Procedure (1)
- Optical Spectroscopy (1)
- Optical flow (1)
- Optical measurements (1)
- Optical probes (1)
- Optical scattering (1)
- Oxygen (1)
- Oxygen sensing (1)
- PAG (1)
- PC characterisation (1)
- PEG (1)
- PES (1)
- PH probe (1)
- Paint (1)
- Paper mills (1)
- Parameter correlation. (1)
- Participatory Approach (1)
- Particle Synthesis (1)
- Particle number concentration (1)
- Particle scattering (1)
- Particle sensors (1)
- Particle size determination (1)
- Particle, imaging (1)
- Partikeldurchmesser (1)
- Partikelgröße (1)
- Partikelgrößenbestimmung (1)
- Partikelkonzentration (1)
- Passivation shell (1)
- Peptide Library (1)
- Peptides (1)
- Performance check (1)
- Phage Display (1)
- Phase transitions (1)
- Phosphor (1)
- Photocuring (1)
- Photodynamic therapy (1)
- Photon bunching (1)
- Photoresist (1)
- Pigments (1)
- Pitfalls (1)
- Plastic reference materials (1)
- Plastikstrategie (1)
- Pollutant (1)
- Polydopamine (1)
- Polyethylene Glycol (1)
- Polymer blends (1)
- Polymer foils (1)
- Polymer nanocomposites (1)
- Polysaccharides (1)
- Porosity (1)
- Power Electronics (1)
- Power electronics (1)
- Practical aspects (1)
- Pre-standardisation (1)
- Prehydrated electron (1)
- Preparation (1)
- Presolvated electron (1)
- Probe (1)
- Prürfrichtlinie (1)
- Pump-probe (1)
- Pycnometry (1)
- Quality assurcance (1)
- Quality control (1)
- Quantum Yields (1)
- Quarzglas (1)
- Quasi-direct damage (1)
- REACH (1)
- ROS (1)
- Radiation damage (1)
- Radiation therapy (1)
- Radical (1)
- Radioactive NP (1)
- Radiolysis (1)
- Radiotherapy (1)
- Reactive oxygen species (1)
- Recycling (1)
- Recycling-by-design (1)
- Reference methods (1)
- Reference procedures (1)
- Reference products (1)
- Reference standards (1)
- Referenzdaten (1)
- Regional workshop (1)
- Reibungsreduktion (1)
- Reinforcement (1)
- Release kinetics (1)
- Reliabiilty (1)
- Research Data Management (1)
- Rheology (1)
- Risk Governance (1)
- Risstrajektorie (1)
- Robotic synthesis (1)
- Robotic-supported synthesis (1)
- Round robin (1)
- Rreference material (1)
- Rubber (1)
- Röntgenrefraktion (1)
- SDLs (1)
- SIMS (1)
- SKPM (1)
- SMPS (1)
- STEM-in-SEM (TSEM) (1)
- Saccharide sensing (1)
- Safe-by-Design (1)
- Safe-by-design (1)
- Safety (1)
- Sample peparation (1)
- Saphir (1)
- Saxs (1)
- Scannig probe microscope (1)
- Scanning Electron Microscopy (1)
- Scanning Kelvin Probe Force Microscopy (SKPFM) (1)
- Scanning Probe methods (1)
- Scanning probe measurements (1)
- Schmiermittel (1)
- Scientific misconduct (1)
- Screening (1)
- Self-driving Labs (1)
- Semantic Interoperability (1)
- Semiconductor materials (1)
- Semiconductur (1)
- Sensors (1)
- Shape (1)
- Silane (1)
- Silica and Polystyrene Particles (1)
- Silica and polystyrene nanoparticles (1)
- Silica particles (1)
- Silicon (1)
- Silicon nanoparticles (1)
- Simulations (1)
- Single cell-ICP-ToF-MS (1)
- Single particle (1)
- Single particle-ICP-ToF-MS (1)
- Single-particle measurements (1)
- Single-strand break (SSB) (1)
- Single-stranded DNA-binding proteins (1)
- Small-Angle X-ray Scattering (1)
- Small-angle scattering (1)
- Small-angle x-ray scattering (1)
- Small-area XPS (1)
- Speciation analysis (1)
- Specific surface (1)
- Spektroskopie (1)
- Spezifische Oberfläche (1)
- Stability (1)
- Stakeholder (1)
- Standardarbeitsanweisung (1)
- Standardarbeitsanweisungen (1)
- Standardized check (1)
- Standards (1)
- Strain measurement (1)
- Structural characterisation (1)
- Superconductivity (1)
- Surface Analytics (1)
- Surface Modification (1)
- Surface functional group quantification (1)
- Surface group (1)
- Surface modification (1)
- Surface modified nano- and microparticles (1)
- Surface morphology (1)
- Surface morphology and chemistry (1)
- Surface oxidation (1)
- Sustainability (1)
- Sustainable-by-Design (1)
- Synthesis library (1)
- TGA (1)
- TMDCs (1)
- TOPAS (1)
- TOPAS-nbio (1)
- Terminal functional groups (1)
- Test guideline (1)
- Theoretical modelling (1)
- Theranostics (1)
- Thermogravimetry (1)
- Thin Layers (1)
- Thin film analysis (1)
- Thin polymer films (1)
- Ti6Al4V alloy (1)
- TiAl64V (1)
- Time of Flight - Secondary ion mass spectrometry (1)
- Time-of-Flight Secondary Ion Mass Spectrometry (1)
- Time-of-flight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved analysis (1)
- Time-resolved coherent scattering (1)
- Time-resolved scattering (1)
- Titania (1)
- Titanium (1)
- Titanium oxide (1)
- Titration (1)
- ToF SIMS (1)
- Tools to combat scientific misconduct (1)
- Topas-nbio (1)
- Transition metal dichalcogenide (1)
- Transmission Kikuchi Diffraction (TKD) (1)
- Transmission electron microscopy (TEM) (1)
- Transparent conductive Oxides (1)
- Trinkwasser (1)
- Two photon polymerisation (1)
- Two-photon polymerisatio (1)
- UV-curing (1)
- Ultrakurzpuls-Laser (1)
- Ultrakurzpuls-Laserbearbeitung (1)
- Ultraschallunterstütztes Fräsen (1)
- Uncertainties (1)
- Upconversion nanoparticles (1)
- Verschleißreduktion (1)
- Viskosität (1)
- Werkstoffe (1)
- White light interferometric microscopy (1)
- Wide-bandgap semiconductors (1)
- Wirksumme (1)
- Workflows (1)
- X-Ray Spectroscopy (1)
- X-ray generation (1)
- X-ray instrumentation (1)
- X-ray spectrometer (1)
- X-ray spectroscopy (1)
- XRD (1)
- XRM (1)
- XUV scattering (1)
- Xray (1)
- Xray photo electron spectrocopy (1)
- attraktive Wechelwirkung (1)
- dispersion (1)
- electron microscopy (1)
- fluorescence standards (1)
- graphene related 2D materials (1)
- pH (1)
- particle size determination (1)
- qNMR (1)
- quality assurcance (1)
- sample preparation (1)
- single cell-ICP-ToF-MS (1)
- single particle-ICP-ToF-MS (1)
- surface group analysis (1)
- synthesis (1)
- Äquivalenzdurchmesser (1)
Organisationseinheit der BAM
- 6 Materialchemie (240)
- 6.1 Oberflächen- und Dünnschichtanalyse (143)
- 1 Analytische Chemie; Referenzmaterialien (63)
- 1.2 Biophotonik (56)
- 6.6 Physik und chemische Analytik der Polymere (38)
- 6.5 Synthese und Streuverfahren nanostrukturierter Materialien (37)
- 6.2 Material- und Oberflächentechnologien (34)
- 5 Werkstofftechnik (24)
- 4 Material und Umwelt (21)
- 5.4 Multimateriale Fertigungsprozesse (17)
A look inside nanoparticles
(2019)
Small-angle scattering is the method of choice when it comes to obtaining information about the interior of nanoparticles. The aim is to make nanotechnology safer. While the use of small-angle neutron scattering (SANS) is limited to a few instruments in the world, small-angle X-ray scattering (SAXS) is widely accessible, with an upward trend. The example of core-shell particles shows how simple their analysis is with data from an Anton Paar laboratory system. Here, SAXS is a central tool for the development of new reference materials based on poly(methyl) acrylate-PVDF core-shell particles. The dimensions of the cores and shells can be precisely determined. A detailed analysis makes it possible to show that the cores contain fluorinated and nonfluorinated polymers, whereas the shell consist only of PVDF. This core-shell particles with a diameter around 40 nm show a significantly higher PVDF beta phase content than the PVDF homopolymer when using an emulsion polymerization technique. This finding is of importance with respect to applications in electroactive devices.
Today there are hundreds of products available containing silver in form of nanoparticles, so-called nanosilver. This situation and the foreseeable future growing market of nanosilver will supposedly cause an increased release of silver into the environment. In this way, silver can be also incorporated into the human body and accumulated in different organs, which can be toxic or at least an unknown risk to human health. For these reasons, it is important to constantly study materials containing silver nanoparticles, their production, application in products and technical processes, dissemination of silver nanoparticles in the environment, and effects on humans and nature. The state-of-the-art nanoparticle size and concentration characterization are illustrated in an extensive interlaboratory comparison. To guarantee the traceability of measurements and to secure the comparison of results of different analytical methods, reference materials (RM) and certified reference materials (CRM) are essential. As a case study, the objective of the presented project was to provide an aqueous suspension of silver nanoparticles as a reference material with a nominal diameter below 10 nm for application in the determination of the size and concentration of nanoparticles in an aqueous surrounding. Measurands are the particles’ diameter D, size distribution width σ, number density N, and concentration c. Target uncertainties, defined as one sigma of the measurand values, are 5% for D, 10% for σ, 20% for N, and 20% for c. The certification was carried out based on ISO 17867 and the relevant ISO-Guides to produce reference material. The process of using SAXS as a reliable method for testing homogeneity and short-term and long-term stability of the material is reported. The particle preparation is described in detail so that the user can carry out the steps of synthesis and characterization in his own laboratory if required. Optionally, one can also contact the author for the provision of the silver nanoparticles. Detailed information can be found elsewhere (BAM Certification Reports, BAM-N008 (2022)).
In contrast to microplastics, little is known about nanoplastics (1 to 100 nm). In order to make the dectecability of nanoplasics more reliable, we started to develop nanoplastic reference materials. This project also aims to anser the question of how the single chain conformation of bio(polymers) changes in contact with nanoplastics. Small-angle X-ray and neutron scattering methods are suitable methods for studing this topic. Recently the soft and hard interactions between polystyrene nanoplasics and human serum albumin corona was investigated with small-angle neutron scattering. Here we concentrate on small-angle X-ray scattering as our favorite method to study how (bio)polymers change their conformation in contact with nanoplastics. The scattering of bovine serum albumin in its native state can be detected easily. The scattering pattern of this biopolymer changes dramatically when its globular stucture changes to a coil structure. Modeling of chain conformations and the calculation of the scattering pattern is relatively easy to perform. Numerous model calculations will be provided to predict the changes of conformation of single bio(polymer) chains when in conatact with nanoplastics. These predictions will be compared with recent experimenal results from in situ measurments of bio(polymers) in contact with nanoplastics. The impact of temperature, polymer concentration and salt on the single-chain conformation changes will be discussed.
Overview about the surface initiated microstructure formation in glass surfaces. Samples which are exposed to a temperature treatment, can develop a crystalline microstructure above Tg at the surface. These separated crystals can be preferably oriented towards the surface of the sample. First experiments about the origin of these orientation phenomenon as well as the potentially causing mechanisms are presented and discussed within the presentation.
Surface-modification platforms that are universally applicable are vital for the development of new materials, surfaces, and nanoparticles. Mussel-inspired materials (MIMs) are widely used in various fields because of their strong adhesive properties and post-functionalization reactivity. However, conventional MIM coating techniques have limited deposition selectivity and lack structural control, which has limited their use in microdevices that require full control over deposition. To overcome these limitations, we developed a micropatterning technique for MIMs using multiphoton lithography, which does not require photomasks, stamps, or multistep procedures. This method enables the creation of MIM patterns with micrometer resolution and full design freedom and paves the way for innovative applications of MIMs in various multifunctional systems and microdevices, such as microsensors, MEMS, and microfluidics.
Organic-inorganic nanostructured materials have drawn much attention over the past decade, particularly due to their versatile and outstanding properties. Possessing the properties between those of polymers and those of glasses, siloxane-based resins are non-toxic, easy to synthesize and process hybrid materials, that hold a promising potential in the field of advanced coatings.
Photocurable resins are nowadays widely used as coatings due to their unique advantages. In particular, cationic ring-opening curing is not inhibited by oxygen, leads to low degree of shrinkage and superior adhesion. The most important, it enables production of high-quality coatings within short exposure times without applying temperature, thus, minimizing the presence of the thermal stress in the substrate. Photocured Cycloaliphatic-Epoxy Oligosiloxane (CEO) resin was reported to be used as encapsulation material for organic electronics. However, further reinforcement of CEO properties is desired to achieve requested device lifetime. One of the common approaches to improve material characteristics is by embedding inorganic nanoparticles into polymer matrix. It has been shown that the resulted nanocomposites exhibit enhanced functional properties included but not limited by optical, mechanical, thermal and barrier ones.
In this work we focused on the incorporation of Boehmite nanoparticles (BA) into CEO matrix as a tool to strengthen the film properties and to study the main changes occurred in the material behavior with regard to its photocuring kinetics, thermal stability and glass transition. Particular interest was focused on the role of particle surface in nanocomposite properties. Hence, BA particles without (HP14) and with organic surface modifier (OS1) at different loadings
(up to 10 wt%) were applied in this study. Morphology investigation with SEM operated in transmission mode showed good BA dispersion forming
network-like structure. At the same time, distribution of particles differed for HP14 and OS1 as a result of different interaction in CEO-solvent-particles system. CEO structure obtained via non-hydrolytic sol-gel reaction was verified by 13C and 29Si NMR. In situ monitoring of film curing was performed using
RT-IR spectroscopy. A slight increase of final convention degree with particle incorporation was observed in contrast to the considerable decrease of curing efficiency reported previously for similar system. Further, the cured hybrid nanocomposite films were analyzed by TGA and DSC, which revealed impact of surface modifier on thermal stability and glass transition temperature.
UV-curing coatings are nowadays widely used due to their unique advantages. High-quality coatings can be obtained at short curing times and low temperatures so that thermal stress to the substrate is minimised. Photocured Cycloaliphatic-Epoxy Oligosiloxane (CEO) resin was reported to be used as encapsulation material for organic electronics. However, further reinforcement of CEO film properties is desired to achieve requested device lifetime.
In this work we introduced Boehmite nanoparticles (BA) into CEO matrix in order to modify the film properties and study the main changes of the material behaviour with regard to its photocuring kinetics, thermal stability and glass transition. Particular interest was focused on the role of particle surface in nanocomposite properties. Hence, BA particles without (HP14) and with organic surface modifier (OS1) at different loadings (up to 10 wt%) were applied in this study. Morphology investigation with SEM operated in transmission mode showed good BA dispersion forming network-like structure. At the same time, distribution of particles differed for HP14 and OS1 as a result of different interaction in CEO-solvent-particles system. CEO structure obtained via non-hydrolytic sol-gel reaction was verified by 13C and 29Si NMR. In situ monitoring of film curing was performed using RT-IR spectroscopy. No significant modification of final convention degree with particle incorporation was observed in contrast to considerable decrease of curing efficiency reported previously for similar system by Esposito et al.,2008. Further, cured hybrid nanocomposite films were analysed by TGA and DSC, which revealed impact of surface modifier on film thermal properties.
Thermosetting materials are gaining increasing attention in many structural composite applications. However, the incorporation of inorganic nanoparticles (NPs) into polymer matrix is a promising approach to enhance their functional characteristics, and thus, to enable the development of thermosets advanced application. It has been shown that Boehmite Alumina (BA) used as nanofillers can improve different parameters of polymers. This NPs can be easily tailored enabling desirable interactions with a big range of polymers. However, the overall effect of nanofiller depends on many factors, therefore, making it hard to predict the resulted performance of nanocomposites. In the current contribution we would like to discuss the impact of Boehmite NPs on two different epoxy resin nanocomposite systems with the focus on the possible influence mechanisms of this nanofiller.
As the first system, UV curable Cycloaliphatic-Epoxy Oligosiloxane (CEOS) resin/Boehmite nanocomposites were investigated by FTIR, TGA, DSC and T-SEM. It was observed that incorporation of BA leads to the reinforcement of glass transition (Tg) and overall thermal stability indicating the attractive interactions between BA and CEOS network. In addition, an increase in epoxy conversion of CEOS was concluded for nanocomposites assuming that particles are involved in UV polymerisation processes.
The second epoxy/Boehmite nanocomposite is based on the bisphenol-A-diglycidyl ether (DGEBA) cured with methyl tetrahydrophtalic acid anhydride (MTHPA). Thermomechanical as well as nanomechanical properties of this material were investigated by DMTA and IR spectroscopy and the advanced Intermodulation AFM, respectively. In contrast to the first system, it was found that BA leads to a decrease of Tg and crosslink density of the polymer while the young’s modulus of the composite and local stiffness of polymer matrix increase significantly.
As a result, the versatile role of Boehmite was detected depending on the investigated systems. Based on the obtained results, the parameters indicating property-efficient epoxy/Boehmite system are suggested.
Inspired by the chemistry of mussel adhesive proteins, polydopamine (PDA has been shown as one of the most versatile platforms for altering the properties and incorporating new functionalities to nearby any material surface despite its nature. Rich chemistry of PDA enables broad variety of surface modification and diverse secondary reactions that makes it extremely interesting for a wide range of application including biomedical field, e.g., drug delivery, adhesives, cell adhesion, biosensing. Despite high potential of polydopamine, the lack of deposition control and precision in existed methods limits their applications in microdevices and miniaturized functional systems like, for example, MEMS, microfluidic and sensorics.
Herein, we demonstrate a novel maskless approach for surface micropatterning with polydopamine based on Multiphoton Lithography that overcomes present limitations. Neither strong oxidants, metal ions nor adjustment of pH to alkaline is required by this technique. The spatial resolution down to 0.8 µm has been achieved which is at least an order of magnitude smaller than shown by other existed methods. We are able to control the morphology and thickness of the micropattern by altering fabrication parameters allowing structure gradient.
Apart from the glass substrate, we achieved PDA patterning at surfaces of different nature such as polychlorotrifluoroethylene, polydimethylsiloxane, polyethylene terephthalate, silicon wafers, and fluorinated glass coverslips. Post-modification of polydopamine micropatterns with protein enzyme like trypsin is demonstrated to highlight its sensing potential.
Presented in this work microfabrication technique empowers advanced applications of mussel-inspired materials in single-molecule bioassays, sensors and other complex microdevices.
To see and not to see - Möglichkeiten und Grenzen der Schadensanalyse mit CT an Kompositmaterialien
(2020)
Anhand von drei Beispielen (Datenfusion an CFK; Machine Learning an Metall-Matrix-Kompositen sowie Refraktion an CFK) wird gezeigt, wie die BAM mit neuen Analysemethoden mehr Informationen aus CT-Datensätzen extrahieren kann, sowie mit der Refraktion eine Analysemethode besitzt, die in Fällen eingesetzt werden kann, bei denen klassische Durchstrahlungsmethoden kein Ergebnis liefern.
Boehmite nanoparticles has been successfully functionalized with APTES. After APTES functionalization further modification with tailored molecules e.g. via carboxylic acids is possible. The tailored surface functionalization is strongly enhanced by improved coupling protocols. Arbitrary variation of the functionalization degree is possible. Thereby the temperature stable APTES functionalization enables a wide range of functional groups.
By TGA-MS analysis strong evidence for the bonding situation of the APTES on the boehmite surface has been found. Additionally first experiments has been performed to predict the polymer-particle compatibility enhancement via reverse wetting angle measurements with AFM.
Semiconductor nanocrystals (quantum dots, QDs) are well known for their superior optoelectronic properties and enabled advancements in several key technologies of the 21st century. II-VI QDs containing the heavy metal element cadmium plaid a central role in this research area. Due to the concerns regarding their toxic potential, the European Union will ban cadmium in 2020 from use in any consumer product.
Due to their comparable optoelectronic properties and a more environmentally friendly character, indium phosphide based QDs (InP-QDs) are a promising alternative. Their large application potential was already shown in their utilization in the newest commercial TV screens. A vital role for highly luminescent QDs for such an application plays the growth of a surface passivating shell around the InP core. The combination of InP/ZnSe/ZnS in so-called core/shell/shell materials exploits the advantages of a small lattice mismatch (3.3%) between InP and ZnSe and the large band gap of ZnS to efficiently confine the excitons in the core and to increase the overall chemical stability. Using a thin ZnSe layer and a thick ZnS shell has shown to improve the optical properties of InP QDs and only recently, the prevention of blinking and mono-exponential decay kinetics could be achieved with a thick ZnSe Shell.
In our contribution, we investigated the influence of the thickness of the intermediate ZnSe layer (1 to 8 monolayers (ML)) on the photophysical properties of InP/ZnSe/ZnS core/shell/shell QDs with a final size of about 10 nm on the ensemble and the single-particle level. By rendering these InP QDs water-soluble, we were able to compare their properties in the organic and aqueous phase and further studied their toxicological potential depending on the chemical composition of their surface shell.
Semiconductor nanocrystals (quantum dots, QDs) are well known for their superior photophysical properties and enabled advancements in several key technologies of the 21st century and numerous technological applications. However, the most studied II-VI semiconductor nanocrystals contain the toxic heavy metal element cadmium, which is limiting their utilization in commercial applications. This has drawn the interest to alternative materials with less toxicity but having similar photophysical features.
The newest generation of TV screens based on QDs have shown that there is a promising environmentally friendly alternative with similar optoelectronic properties, namely indium phosphide (InP) QDs. InP QDs possess a bulk band gap of 1.35 eV with an exciton Bohr radius of ca. 10 nm and thus allow to tune their photoluminescence (PL) from the visible to the near-infrared. Tuning the size and shape of InP QDs and thus tailor their optoelectronic properties can be achieved by different strategies, which range from different types and concentrations of precursors, synthesis temperature or post-synthetic manipulations like etching. The incorporation of other elements like Gallium within the InP core synthesis is another possibility. Using a GaP intermediate layer before growing a ZnS shell has been shown to increase the PL quantum yield, which has been attributed to reduced lattice strain and the removal of phosphor vacancies. Different Ga precursors were investigated but a thorough investigation in terms of their reactivity, localization in the QD and influence on the photophysical properties is lacking to date.
In this contribution we will present the detailed investigation of the presence of two different Ga precursors within the InP core synthesis. Photophysical characterizations (steady-state and PL life-time measurements), transmission electron microscopy, XRD and EDX gave insights into the reactivity of the Ga precursors, the Ga localization in the InP core and influences on the photophysical properties. The variation of the precursor and surfactant concentration and the utilization of different ligands for the Ga precursor allowed tuning the PL emission towards the blue or the red. Depending on the used precursor type we observed the formation of larger-sized InP/GaP core/shell nanocrystals or the formation of InGaP alloy structures enabling to assess the blue range of emission (475 nm).
Fluorescent semiconductor nanocrystals, also known as quantum dots (QDs), enabled many advancements in biotechnology, photovoltaics, photocatalysis, quantum computing and display devices. The high versatility of this nanomaterial is based on their unique size-tunable photoluminescence properties, which can be adjusted from the visible to the near-infrared range. In contrast to other nanomaterials, QDs made the transition from a laboratory curiosity to the utilization in commercial products, like the QLED television screen or in smartphone displays. The best investigated QDs are composed of heavy metals like cadmium or lead, which is not the best choice in terms of toxicity and environmental pollution. A more promising material is Indium Phosphide (InP), which is also currently used by Samsung, Sony and co. in the QLED displays.
In this contribution, I would like to give you a sneak peek behind the curtains of nanomaterial synthesis and show how this material is produced, how to stabilize their structural properties, and assess their toxicity in environmentally relevant conditions. Furthermore, I would like to present a synthesis method to accomplish the last open challenge in display technology of a blue luminescent LED based on QDs by introducing a new element to the InP QDs.
The performance of functional coatings and adhesively joined hybrid components relies strongly on the stability of the polymer-metal interface. With the increasing utilization of multi-material structures in the automotive and aerospace industry, it is of great scientific and technical interest to understand the processes leading to interface degradation and to develop novel strategies to increase corrosion and delamination resistance.
The aim of this project is to develop thin epoxy-based films on aluminium alloy AA2024-T3 as a model system and to investigate their interfacial stability under corrosive and coupled corrosive-mechanical load. Electrochemical and spectroscopic methods were used for the characterisation of the film properties and in situ corrosion experiments were performed by means of AFM. The deformation properties of the aluminium alloy and the model coatings were investigated by means of scanning Kelvin probe force microscopy (SKPFM) utilizing the integrated tensile stage.
The presentation will give a brief overview of the capabilities of the new AFM setup to foster future collaborations and summarize our work on the interface stability of model coatings.
The optical properties of these materials strongly depend on the excitation power density, i.e., the number of photons absorbed per time interval. The upconversion quantum efficiencies (ΦUC) of these materials, the excitation power dependent population i.e. the emission characteristics, and the deactivation dynamics are influenced by nanoparticle architecture, doping concentration, and the microenvironment. We will discuss how time resolved measurements can help to understand the fundamental photophysical mechanisms and discuss differences to other nanocrystals like quantum dots.
In the current study, we investigate an interaction under high-pressure high-temperature of single phase fcc-, hcp- and bcc-structured high-entropy alloys with hydrogen, carbon and nitrogen to obtain high-entropy hydrides, carbides and nitrides. Structural changes in high-entropy alloys upon compression and heating in the presence of these light elements are in the focus of our investigation. An easy route to high-entropy hydrides, carbides and nitrides will open new synthetic horizons in compositionally complex materials. Our study suggests that high-entropy alloys form high- entropy hydrides mainly with a composition close to M:H 1:1 ratio. Hydrides can be obtained under compression with hydrogen as a pressure compression medium or using hydrogen fluid as reactive agent.