Zitieren Sie bitte immer diesen URN: urn:nbn:de:kobv:b43-597455
Settling Velocities of Small Microplastic Fragments and Fibers
- There is only sparse empirical data on the settling velocity of small, non-buoyant microplastics thus far, although it is an important parameter governing their vertical transport within aquatic environments. This study reports the settling velocities of 4031 exemplary microplastic particles. Focusing on the environmentally most prevalent particle shapes, irregular microplastic fragments of four different polymer types (9–289 µm) as well as five discrete length fractions (50–600 µm) of common nylon and polyester fibers were investigated, respectively. All settling experiments were carried out in quiescent water using a specialized optical imaging setup. The method has been previously validated in order to minimize disruptive factors, e.g. thermal convection or particle interactions, and thus enable the precise measurements of the velocities of individual microplastic particles (0.003–9.094 mm/s). Based on the obtained data, ten existing models for predicting a particle’s terminalThere is only sparse empirical data on the settling velocity of small, non-buoyant microplastics thus far, although it is an important parameter governing their vertical transport within aquatic environments. This study reports the settling velocities of 4031 exemplary microplastic particles. Focusing on the environmentally most prevalent particle shapes, irregular microplastic fragments of four different polymer types (9–289 µm) as well as five discrete length fractions (50–600 µm) of common nylon and polyester fibers were investigated, respectively. All settling experiments were carried out in quiescent water using a specialized optical imaging setup. The method has been previously validated in order to minimize disruptive factors, e.g. thermal convection or particle interactions, and thus enable the precise measurements of the velocities of individual microplastic particles (0.003–9.094 mm/s). Based on the obtained data, ten existing models for predicting a particle’s terminal settling velocity were assessed. It is concluded that models, which were specifically deduced from empirical data on larger microplastics, fail to provide accurate predictions for small microplastics. Instead, a different approach is highlighted as a viable option for computing settling velocities across the microplastics continuum in terms of size, density and shape.…
Autor*innen: | Stefan DittmarORCiD, Aki S. RuhlORCiD, Korinna AltmannORCiD, Martin Jekel |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Environmental Science & Technology |
Jahr der Erstveröffentlichung: | 2024 |
Organisationseinheit der BAM: | 6 Materialchemie |
6 Materialchemie / 6.6 Physik und chemische Analytik der Polymere | |
Veröffentlichende Institution: | Bundesanstalt für Materialforschung und -prüfung (BAM) |
Verlag: | American Chemical Society (ACS) |
Jahrgang/Band: | 58 |
Ausgabe/Heft: | 14 |
Erste Seite: | 6359 |
Letzte Seite: | 6369 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Sanitär- und Kommunaltechnik; Umwelttechnik |
Freie Schlagwörter: | Microplastic fibers; Microplastics; Sedimentation; Settling velocity; Sinking velocity |
Themenfelder/Aktivitätsfelder der BAM: | Umwelt |
Umwelt / Umwelt-Material-Interaktionen | |
DOI: | 10.1021/acs.est.3c09602 |
URN: | urn:nbn:de:kobv:b43-597455 |
ISSN: | 0013-936X |
Verfügbarkeit des Dokuments: | Datei für die Öffentlichkeit verfügbar ("Open Access") |
Lizenz (Deutsch): | Creative Commons - CC BY - Namensnennung 4.0 International |
Datum der Freischaltung: | 25.03.2024 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 27.05.2024 |
Schriftenreihen ohne Nummerierung: | Wissenschaftliche Artikel der BAM |