Labor Additive and Intelligent Manufacturing for Sustainability (AIMS)
Refine
Document Type
- Article (18)
- conference proceeding (article) (1)
Language
- English (19)
Has Fulltext
- no (19)
Is part of the Bibliography
- no (19) (remove)
Keywords
- additive manufacturing (5)
- Additive manufacturing (2)
- PA12 (2)
- Polymers (2)
- laser beam melting (2)
- multi-material deposition (2)
- polyamide 12 (2)
- Bulk density (1)
- Dry particle coating (1)
- FLM-Printing (1)
Institute
Begutachtungsstatus
- peer-reviewed (19) (remove)
First results regarding the realisation of multi-material components manufactured by Laser Beam Melting of polymers and metals are published. For realising composite structures from polymer powders by additive manufacturing, at first relevant material properties regarding compatibility have to be analysed. The paper shows the main requirements for compatibility between different materials and offers first results in form of a compatibility matrix of possible combinations for composite structures.For achieving gradient properties of additively manufactured metal parts by using composite materials the composition of alloying components in the powder and adapted process strategies are varied. As an alternative to atomizing pre-alloyed materials, mixtures of different powders are investigated.
By simultaneous laser beam melting (SLBM), different polymer powders can be processed to multi-material parts, which offers the potential to enlarge the field of application for conventional LBM. In a SLBM process, a powder bed consisting of different polymers and therefore with different melting and crystallization temperatures is deposited. Besides the use of infrared emitters for preheating the lower melting polymer, a CO2 laser distributes the necessary preheating temperature of the higher melting polymer. In the last step, a thulium fibre laser distributes the energy necessary for melting the two preheated powders simultaneously. In order to analyze the temperature gradients of the process on the powder surface and in deeper layers, a high-resolution thermal imaging system and thermocouples are used.
The generation of multi-material components by laser beam melting (LBM) is a challenge which requires the invention of new coating devices for preparation of arbitrary powder patterns. One solution is the usage of vibration-controlled nozzles for selective deposition of polymer powders. Powder flow can be initiated by vibration enabling a start-stop function without using any mechanical shutter. In this report, the delivery of polymer powder by vibrating nozzles is investigated with respect to their application in LBM machines. Therefore, a steel nozzle attached to a piezo actor and a weighing cell is used in order to measure the stability and time-dependence of the powder mass flow upon vibration excitation with the usage of different kind of powder formulations. The results show that precompression of the powder inside the nozzle by vibration excitation is essential to realize a reliable start-stop function with reproducible discharge cyles and to prevent a initial flush of powder flow. Moreover, the use of different powder materials showed that mass flow is even possible with powders which are not optimized regarding flowability, but is readily enhanced with a factor of 2 to 3 by admixing Aerosil® fumed silica.
By selective laser sintering (SLS), polymer powders are molten layer by layer to build conventional prototypes or parts in small series with geometrical freedom that cannot be achieved by other manufacturing technologies. The SLS process is mainly defined by the beam–matter interaction between powder material, laser radiation and different material characteristics by itself. However the determination of these different material characteristics is problematic because powder material imposes certain requirements that cannot sufficiently be provided by conventional measurement methods. Hence new fundamental investigation methods to determine the optical and thermal material characteristics like the thermal diffusivity, thermal conductivity, or the influence of different heating rates on the melting behavior are presented in this paper. The different analysis methods altogether improve the process of understanding to allow recommendations for the future process controlling.
Selective Laser Sintering (SLS) is an additive manufacturing technique whereby a laser melts polymer powder layer by layer to generate three-dimensional parts. It enables the fabrication of parts with high degrees of complexity, nearly no geometrical restrictions, and without the necessity of a tool or a mold. Due to the orientation in the building space, the processing parameters, and the powder properties, the resulting parts possess an increased surface roughness. In comparison to other manufacturing techniques, e.g. injection molding, the surface roughness of SLS parts results from partially melted powder particles on the surface layer. The actual surface roughness must thus be characterized with respect to the part's eventual application. At the moment, there is no knowledge regarding which measuring technique is most suitable for detecting and quantifying SLS parts' surface roughness. The scope of this paper is to compare tactile profile measurement methods, as established in industry, to optical measurement techniques such as Focus Variation, Fringe Projection Technique (FPT), and Confocal Laser Scanning Microscope (CLSM). The advantages and disadvantages of each method are presented and, additionally, the effect of tactile measurement on a part's surface is investigated.
Powder based Additive Manufacturing technologies offer huge potential for building parts with almost no geometrical restrictions, but both the process controlling as well as the part properties are strongly dependent on different material characteristics of the material, like the flowability. In this work, different weight percentages of nano-scaled silica dioxide particles (Aerosil®) are admixed to pure polyethylene and polypropylene powder and the resulting flowability is determined. Besides using the Hausner ratio as standardized value, the degree of coverage is introduced as a new characteristic to quantify the powder flowability. The degrees of coverage are compared to the Hausner ratios to allow a discussion and evaluation about the different characteristic values. Additionally, tensile bars consisting of polypropylene are generated to determine the porosity by cross sections and the mechanical part properties by tensile testing. As mechanical part properties, the tensile strength and elongation at break are determined and the effects of different powder flowability on these properties are analyzed.
Purpose – The purpose of this paper is to demonstrate the processability of cohesive PE-HD particles in laser beam melting processes (LBM) of polymers. Furthermore, we present a characterization method for polymer particles, which can predict the quality of the powder deposition via LBM processes. Design/methodology/approach – This study focuses on the application of dry particle coating processes to increase flowability and bulk density of PE-HD particles. Both has been measured and afterwards validated via powder deposition of PE-HD particles in a LBM machine. Findings – For efficient coating in a dry particle coating process, the PE-HD particles and the attached nanoparticles need to show similar surface chemistry, i.e. both need to behave either hydrophobic or hydrophilic. It is demonstrated that dry particle coating is appropriate to enhance flowability and bulk density of PE-HD particles and hence considerably improves LBM processes and the resulting product quality. Originality/value – At present, in LBM processes mainly polyamide (PA), 12 particles are used, which are so far quite expensive in comparison to, for example, PE-HD particles. This work provides a unique and versatile method for nanoparticulate surface modification which may be applied to a wide variety of materials. After the coating, the particles are applicable for the LBM process. Our results provide a correlation between flowability and bulk density and the resulting product quality.
This study increases the basic understanding of optical material properties of polymer powders used in selective laser sintering (SLS). Therefore, different polymer powder materials were analyzed regarding their optical material properties with an integration spheres measurement setup. By the measurements a direct connection between the absorption behavior of the solid material and the overall optical material characteristics of the same material in powdery form could be shown. The results were used to develop an advanced explanation model for the optical material properties of powders. At present, existing explanation models only consider the occurring of multiple reflections in the gaps between the particles to explain the overall optical material properties of powder materials. Thus, by also considering the absorption behavior of the single particles, the basic understanding of the beam-matter interaction and their effect on the optical material properties of powder materials can be expanded.
In this report, the dry delivery of polyamide 12 powders by vibrating capillary steel nozzles is investigated and discussed regarding its potential for powder layer preparation in Laser Beam Melting. Therefore, a setup including a steel nozzle assembled on a piezoelectric actuator is presented, which enables the precise control over very small powder quantities by vibration excitation. An analysis reveals that the mass flow through the nozzle can be adjusted by the vibration modes in a certain range depending on the nozzle's specifications, whereas the vibration modes themselves show a complicated behaviour. Using a positioning system in combination with the vibrating nozzle, single-layer patterns consisting of polyamide 12 are produced and characterized regarding surface homogeneity and selectivity using a laser stripe sensor.
Due to the growing number of applications for Additive Manufacturing (AM), an increasing need for enhanced quality control methods exists. Here optical measurement techniques are often used for in-situ monitoring in AM. There is a great potential to standardize and improve applications of optical measurement devices in accordance to the increasing requirements of measuring tasks. Beside the optical material qualifications, especially process-oriented changes in optical effects are of great relevance for in-situ evaluations. The optical modifications may be attributed to aggregate specific phase transitions coming along with variable emitted wavelengths. A measuring setup with two integrations spheres and a heated process chamber have been developed to analyze the optical interactions of laser radiation and visual illumination with the powder. The process oriented analysis for selective laser sintering lead to improved operating conditions in the field of in-situ measurements in combination with an accurate evaluation of the absorption ratio of the examined powder.
The mechanical and microstructural investigation of polymer parts (polyamide 12) fabricated by Selective Laser Sintering as part of a Round Robin initiative is presented. The paper focuses on the microstructural analysis of the Round Robin samples and their evaluation regarding their effect on mechanical properties with respect to each other. Therefore optical microscopy on microtomed samples, X-ray computed tomography and Differential Scanning Calorimetry is used to determine the morphology of residual particle cores and of internal pores.
The mechanical properties of polymer parts built by Selective Laser Sintering are strongly related to the internal microstructure which differs with the applied production parameters. The paper focuses on the back tracing of the pore morphology of laser sintered polyamide-12 samples to the process parameters. Therefore, a data base is used which is supplied by a Round Robin initiative and includes mechanical tensile tests and the microstructural analysis of the pore morphology of several different sample charges built with different machines. The pore morphologies (porosity, pore density, pore shape and pore arrangement) measured by X-ray computed tomography are compared and discussed regarding the employed parameters and the resulting mechanical properties. The investigations point out that pore density is a superior indicator than porosity for mechanical issues. This is especially valid along the build direction since pore morphology has shown to be strongly anisotropic. Moreover, the analysis revealed that pore density is strongly affected by the process temperature, which is proved to be essential for the fabrication of mechanical robust parts using Selective Laser Sintering.
Conventional Selective Laser Sintering of polymers is restricted to the processing of single materials. The fabrication of components consisting of different material regions is a challenge which cannot be realized by standard coating devices basing on blades or rollers. Thus, advanced coating and deposition techniques are needed which enable the precise and reliable control over very small powder quantities in order to prepare arbitrary powder patterns with high accuracy and repeatability. In this report, the delivery of polymer powder by vibrating nozzles inside laser sintering machines is investigated. Therefore, a steel nozzle attached to a piezo actuator is integrated into a machine, whereas the nozzle itself features internal channels which allow the precise control over the powder temperature using heat transfer oil. The setup is used to study the influence of different system configurations on the powder deposition characteristics as resolution and layer surface roughness. The results show that temperature influences the mass flow depending on the material used and that a precise deposition of powder pattern with microscale resolution is possible with optimized parameters. Finally, the multimaterial powder pattern is fused by a new illumination strategy of laser sintering which is called Simultaneous Intensity-Selective Laser Sintering in order to demonstrate the potential of this new approach.
In order to understand the absorption characteristic, a ray trace model is developed by taking into account the reflection, absorption and refraction. The ray paths are resolved on a sub-powder grid. For validation, the simulation results are compared to analytic solutions of the irradiation of the laser beam onto a plain surface. In addition, the absorptance, reflectance and transmittance of PA12 powder layers measured by an integration sphere setup are compared with the numerical results of our model. It is shown that the effective penetration depth can be lower than the penetration depth in bulk material for polymer powders and, therefore, can increase the energy density at the powder bed surface. The implications for modeling of the selective laser sintering (SLS) process and the processability of fine powder distributions and high powder bed densities are discussed.
In this paper, the use of electrophotographic polymer powder transfer for the preparation of multi-material layers is discussed with respect to the application in powder bed-based additive manufacturing technologies as selective laser sintering (SLS). Therefore, the challenges of this task are considered verifying the critical process steps in order to develop a concept for an electrophotograhic laser sintering machine. On that basis, an experimental setup with a two-chamber design is realized which enables the investigation of the electrophotographic powder transfer at typical process conditions of SLS. Using this setup, transfer tests of polypropylene powder patterns were performed and qualitatively analyzed by photographic imaging. The results confirm the high potential of the application of electrophotography for multi-material powder deposition and show how a residual electrophotographic powder deposition can be achieved in general, which is independent from the already produced part height, in order to build up three-dimensional multi-material components.
Comparison between the optical properties of injection molded and additive manufactured components
(2018)
Fused Layer Manufacturing (FLM) is an additive technology based on polymer material extrusion. Due to variations in temperature during the manufacturing process and the resulting stress between the stacked layers, the final parts show anisotropic mechanical properties. One possible approach for their reduction is the immediate local preheating of the surface via laser radiation. At first, our research examines the influence of laser parameters as wavelength, power, velocity and area of impact for the preheating of the surface. In addition, an overview of possible parameter combinations is given based on the selection of raw materials, its colors, thicknesses and the manufacturing process. Initially, the absorption level of the materials regarding the emitted wavelength is detected using a spectrophotometer. Subsequently, preheating tests are conducted with different laser types while the temperature is determined by a thermal camera. The selected laser type is planned to get mounted on a prototype-machine for further in-situ preheating experiments on FLM parts during the manufacturing process.
Laser transmission welding is a well-known joining technology for welding thermoplastics. Although the process is already used industrially, fundamental process-structure-property relationships are not fully understood and are therefore the subject of current research. One aspect of these mentioned process-structure-property relationships is the interaction between the temperature field during the welding process, the weld seam morphology of semi-crystalline thermoplastics, and the weld seam strength. In this study, the influence of the line energy on the weld seam morphology of polypropylenes is analyzed. For this purpose, the size of spherulites in the weld seam is investigated, as well as different occurring phases of polypropylene (a- and b-phase). It is shown that both the spherulite size of the a-phase and the amount of b-phase increase with increasing line energy. For the explanation and discussion of the results, a temperature-dependent thermal simulation model is used to derive characteristic attributes of the temperature field (maximum temperatures, cooling rates, temperature gradients).
Laser transmission welding is a non-contact and efficient process technology for joining thermoplastic polymers. In the conventional process, laser sources in the wavelength range of 1 μm are usually used. Therefore, most of the laser radiation is transmitted through the upper joining partner and absorbed only in the lower joining partner. As a result, the possibilities to influence the temperature field especially in the upper joining partner are limited. To overcome these limitations, an additional thulium fiber-laser with a wavelength of 1.94 μm is used in this study and coaxially aligned with a diode laser. The use of an additional thulium fiber-laser leads to a significant absorption in the upper joining partner. Through this approach, it is shown that the temperature field and the weld seam geometry can be influenced by using these two different discrete laser wavelengths. Depending on the intensity distribution of both lasers, an increase of the size of the heat affected zone in the upper joining partner can be observed. In order to develop a better process understanding, a thermal finite element model is built up and verified by comparing the calculated size of the heat affected zone for different process parameters with the experimental data. The model is able to represent the influence of both laser sources on the temperature field and is used to calculate characteristics of the temperature field, such as maximum temperatures or cooling rates. The characteristics are then used to explain the weld seam morphology, such as occurrence and size of spherulitic structures in the weld seam.
A new approach to coat PA12 powders with laser-generated nanoparticles for selective laser sintering
(2018)
The modification of selective laser sintering (SLS) powder materials by nanoadditives offers the possibility to adapt the powder properties to the laser sintering process or the resulting part properties. To avoid agglomeration of the nanofiller, a new approach in which surfactant-free laser-generated colloidal nanoparticles are adsorbed onto the polymer surface directly in an aqueous solution is demonstrated. Based on this novel approach, polyamide 12 (PA12) powders are decorated with metal and oxide nanoparticles and processed via SLS. Electron microscopy and confocal laser scanning imaging are utilized to analyze the dispersion of the filler.