Das Suchergebnis hat sich seit Ihrer Suchanfrage verändert. Eventuell werden Dokumente in anderer Reihenfolge angezeigt.
  • Treffer 47 von 129
Zurück zur Trefferliste

Potential of the Synthetic Fuel Oxymethylene Ether (OME) for the Usage in a Single-Cylinder Non-Road Diesel Engine: Thermodynamics and Emissions

  • Non-road sectors, such as agriculture and construction machinery, require high energy densities and flexibility in use, which is why diesel engines are mainly used. The use of climate-neutral fuels, produced from renewable energies, such as Oxymethylene Ether (OME) as a diesel substitute, can significantly reduce CO2 and pollutant emissions in these sectors. In addition to CO2 neutrality, OME also offers improved combustion characteristics compared to diesel fuel, eliminating the soot–NOx trade-off and thus enabling new opportunities in engine design and calibration. In this paper, the combustion of pure OME on a close-to-production, single-cylinder non-road diesel engine with a pump–line–nozzle injection system is analyzed. A variation of the center of combustion at constant power output was performed for diesel and OME at different operating points. Two injectors were investigated with OME. A study on ignition delay and a detailed thermodynamic analysis was carried out. In addition, the exhaust emissions CO, NOx, VOC, as well as particulate-matter, -number and -size distributions were measured. With OME, a significantly shorter ignition delay as well as a shortened combustion duration could be observed, despite a longer injection duration. In addition, the maximum injection pressure increases. VOC and CO emissions are reduced. Particulate matter was reduced by more than 99% and particle number (>10 nm) was reduced by multiple orders of magnitude. The median of the particle size distribution shifts from 60 to 85 nm (diesel) into a diameter range of sub 23 nm (OME). A significant reduction of NOx emissions with OME enables new degrees of freedom in engine calibration and an efficiency advantage without hardware adaption.

Volltext Dateien herunterladen

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Verfasserangaben:Florian ZacherlORCiD, Christoph Wopper, Peter SchwanzerORCiD, Hans-Peter Rabl
URN:urn:nbn:de:bvb:898-opus4-55350
DOI:https://doi.org/10.3390/en15217932
Titel des übergeordneten Werkes (Englisch):Energies
Verlag:MDPI
Dokumentart:Artikel aus einer Zeitschrift/Zeitung
Sprache der Veröffentlichung:Englisch
Jahr der Veröffentlichung:2022
Veröffentlichende Institution:Ostbayerische Technische Hochschule Regensburg
Datum der Freischaltung:28.10.2022
Jahrgang:15
Ausgabe / Heft:21
Aufsatznummer:7932
Erste Seite:1
Letzte Seite:26
Bemerkung:
Project: NAMOSYN: Nachhaltige Mobilität durch synthetische Kraftstoffe (Funding Nr. 03SF0566N0)
Bemerkung:
Corresponding author: Florian Zacherl
Fakultäten / Institute / Einrichtungen:Fakultät Maschinenbau
Begutachtungsstatus:peer-reviewed
OpenAccess Publikationsweg:Gold Open Access- Erstveröffentlichung in einem/als Open-Access-Medium
Corresponding author der OTH Regensburg
Forschungsschwerpunkt:Energie und Mobilität
Finanzierung / Förderung:Publikationsfonds der OTH Regensburg
Lizenz (Deutsch):Creative Commons - CC BY - Namensnennung 4.0 International