4 Material und Umwelt
Filtern
Dokumenttyp
- Zeitschriftenartikel (294)
- Vortrag (279)
- Posterpräsentation (137)
- Beitrag zu einem Tagungsband (43)
- Buchkapitel (23)
- Sonstiges (7)
- Beitrag zu einem Sammelband (5)
- Dissertation (5)
- Forschungsbericht (4)
- Forschungsdatensatz (3)
Sprache
- Englisch (805) (entfernen)
Schlagworte
- Biocides (49)
- Antimicrobial resistance (34)
- Corrosion (25)
- Bacteria (24)
- Biofilms (24)
- Ink (24)
- Leaching (23)
- MIC (19)
- Biofilm (18)
- Archaeometry (17)
- Nano (17)
- Sewage sludge (17)
- VOC (17)
- Evolution (15)
- Phosphorus (15)
- XRF (15)
- Bottom ash (14)
- Methanogens (14)
- OECD (14)
- Per- and Polyfluoroalkyl substances (PFAS) (14)
- Phosphorus recovery (14)
- Microbiologically influenced corrosion (13)
- PFAS (13)
- Raman spectroscopy (13)
- Recycling (13)
- Fungus (12)
- Inks (12)
- Construction products (11)
- Disinfection (11)
- E. coli (11)
- Manuscripts (11)
- NAP-XPS (11)
- XANES spectroscopy (11)
- Antimicrobial coating (10)
- Biocide (10)
- Black fungi (10)
- Reverse glass painting (10)
- Soil (10)
- Archaea (9)
- Cascade impactor (9)
- DRIFTS (9)
- Genetics (9)
- Knufia petricola (9)
- Manuscript (9)
- Microbiology (9)
- Persistence (9)
- Resistance (9)
- Standardization (9)
- Termite (9)
- Wastewater (9)
- Aerosol (8)
- Circular economy (8)
- Ectoine (8)
- Fertilizer (8)
- Fungi (8)
- Geosynthetics (8)
- Indoor air quality (8)
- Non-destructive testing (8)
- Non-invasive analysis (8)
- TXRF (8)
- Volatile organic compounds (8)
- X-ray absorption near-edge structure (XANES) spectroscopy (8)
- Coptic (7)
- Horizontal gene transfer HGT (7)
- Laser-induced periodic surface structures (LIPSS) (7)
- Melanin (7)
- Nanomaterial (7)
- Papyrus (7)
- Reference material (7)
- Resistance evolution (7)
- Risk assessment (7)
- Termites (7)
- Tolerance (7)
- Weathering (7)
- Antibiotics (6)
- BOFS (6)
- Bacterial adhesion (6)
- Biocide tolerance (6)
- Combustion ion chromatography (6)
- Cultural heritage (6)
- Dead Sea Scrolls (6)
- Ecotoxicity (6)
- Emission (6)
- Fertilzer (6)
- Glutaraldehyde (6)
- Horizontal gene transfer (6)
- Hydraulic reactivity (6)
- ISO 16000-6 (6)
- Pathogen (6)
- Remediation (6)
- Scandium (6)
- Thermal desorption (6)
- Wood protection (6)
- Alginate (5)
- Antimony (5)
- Bio-weathering (5)
- Biofilm formation (5)
- Cross-resistance (5)
- DHN melanin (5)
- Degradation (5)
- Emission test chamber (5)
- Environmental Simulation (5)
- Gas chromatography (5)
- Ground water (5)
- Heterogeneity (5)
- Immunity (5)
- Ink analyses (5)
- Iron-gall ink (5)
- Korrosion (5)
- Methanogen (5)
- Mutation rate (5)
- Nanomaterials (5)
- Nanoparticle (5)
- Olivine (5)
- Parchment (5)
- Pigment (5)
- Pigments (5)
- Portland Cement (5)
- Prüfrichtlinie (5)
- Pyrometallurgy (5)
- Reflectography (5)
- Sc-ICP-ToF-MS (5)
- Sewage sludge ash (5)
- Single cell analysis (5)
- Spectroscopy (5)
- Standardisation (5)
- Test guideline (5)
- Ultrafine particles (5)
- XANES (5)
- XPS (5)
- Zinc (5)
- ATR (4)
- Air quality monitoring (4)
- Alite (4)
- Analytical method (4)
- Anobium punctatum (4)
- Antimicrobial surfaces (4)
- Antimicrobials (4)
- Biocorrosion (4)
- Carbon steel (4)
- Combustion Ion Chromatography (4)
- Corrosion products (4)
- Diffusive gradients in thin films (DGT) (4)
- EN 16516 (4)
- Electric arc furnace dust (4)
- Emission reference materials (4)
- Environmental evaluation (4)
- Geotextiles (4)
- Guideline (4)
- Gypsum (4)
- Humboldt Codices (4)
- ICP-MS (4)
- Ink analysis (4)
- Light (4)
- Lysimeter (4)
- Method development (4)
- Microcolonial fungi (4)
- Middle Ages (4)
- NanoSIMS (4)
- Nanoparticles (4)
- Nitrogen (4)
- Particles (4)
- Passive sampling (4)
- Polyethylene (4)
- Polyglycerol (4)
- Raman Spectroscopy (4)
- Red Mud (4)
- Reference materials (4)
- Round robin test (4)
- Steelmaking slag (4)
- Tantalum (4)
- Thermal treatment (4)
- Tineola bisselliella (4)
- Transformation (4)
- UFP (4)
- VVOCs (4)
- Virus (4)
- 3D printing (3)
- Affinity chromatography (3)
- Antibodies (3)
- Antimicrobial (3)
- Architecture (3)
- BEMMA (3)
- Bauxite Residue (3)
- Biodeterioration (3)
- Bioinformatics (3)
- Black fungus (3)
- Blast furnace sludge (3)
- Cairo Genizah (3)
- Carbon Fibers (3)
- Carbon steel corrosion (3)
- Chamber test (3)
- Chemical analysis (3)
- Chemical durability (3)
- Combustion ion chromatography (CIC) (3)
- DNA (3)
- Design of experiments (3)
- Diffusive Gradients in thin films (DGT) (3)
- Diffusive gradients in thin-films (DGT) (3)
- Drawings (3)
- ESEM (3)
- Electron microscopy (3)
- Element mass concentration (3)
- Emerging (3)
- Emission reference material (3)
- Emissions (3)
- Environmental simulation (3)
- Extracellular polymeric substances (3)
- Extractable organically bound fluorine (EOF) (3)
- Extremotolerance (3)
- FFF-3D-Printer (3)
- FIB/SEM (3)
- Flow Model (3)
- Fluorescence (3)
- Genomics (3)
- Groundwater (3)
- Gut microbiota (3)
- HP14 (3)
- Halomonas elongata (3)
- Herculaneum (3)
- High resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) (3)
- Immune gene family (3)
- In-situ analysis (3)
- Incineration bottom ash (3)
- Interlaboratory comparison (3)
- Ir DNA staining approach (3)
- LIPSS (3)
- Laser processing (3)
- Manuscript studies (3)
- Material science (3)
- Materials emissions test (3)
- Mechanochemical treatment (3)
- Metabolism (3)
- Methanogen-induced microbiologically influenced corrosion (3)
- Microbiological influenced corrosion MIC (3)
- Mixed ink (3)
- Modelling (3)
- Modelling studies (3)
- Non destructive analytical techniques (3)
- Non-destructiv testing (3)
- Odour (3)
- Osmoadaptation (3)
- Particle size distribution (3)
- Perceived Intensity (3)
- Persian manuscripts (3)
- Phenotypic diversity (3)
- Phosphorus fertilizer (3)
- Quality assurance (3)
- Raman (3)
- Recovery (3)
- Recycling fertilizer (3)
- Recycling materials (3)
- Renewable Energy, Sustainability and the Environment (3)
- Rock-inhabiting fungus (3)
- SC-ICP-ToF-MS (3)
- Secondary building materials (3)
- Selective chlorination (3)
- Single cell (3)
- Size (3)
- Social (3)
- Stress tolerance (3)
- Struvite (3)
- Sulfate reducing bacteria (3)
- Symbiosis (3)
- UV radiation (3)
- VOC-emission (3)
- VVOC (3)
- Virulence (3)
- Waste management (3)
- Waste treatment (3)
- Wood Protection (3)
- X-ray diffraction (3)
- XRF analysis (3)
- 3D inspection (2)
- Additive Manufacturing (2)
- Additive Manufacturing (AM) (2)
- Adipokinetic hormone (2)
- Adipokinetic hormone receptor (2)
- Adsorbable organically bound fluorine (AOF) (2)
- Aerosol measurements (2)
- Agronomic performance (2)
- Air exchange rate (2)
- Air pollution (2)
- Air sampling (2)
- Aluminium (2)
- Ambient aerosols (2)
- Ammonium (2)
- Analytical methods (2)
- Anoxia (2)
- Antagonism (2)
- Antibiotic resisitance (2)
- Antiquity (2)
- Apanteles carpatus (2)
- Arabic Recipes (2)
- Artificial ageing (2)
- AshDec (2)
- Atomic and Molecular Physics and Optics (2)
- Bacterial adhesion tests (2)
- Bacterial attachment (2)
- Bagasse (2)
- Baryscapus tineivorus (2)
- Bassanite (2)
- Bauprodukte (2)
- Bee (2)
- Biodiversity (2)
- Biofilm growth (2)
- Biofouling (2)
- Biogenic weathering (2)
- Biological pest control (2)
- Bioreceptivity (2)
- Biosynthesis (2)
- Biotechnology (2)
- Blattodea (2)
- Botrytis cinerea (2)
- Brown-rot fungi (2)
- Building and Construction (2)
- CDW processing (2)
- CFK (2)
- CO2 assisted impregnation (2)
- CSMC (2)
- Cabonfasern (2)
- Calcium alkali phosphate (2)
- Calcium silicate (2)
- Calcium sulfate (2)
- Cannibalism (2)
- Capsules (2)
- Carbide formation (2)
- Carbon feeding (2)
- Carbon ink (2)
- Chemical characterization (2)
- Chinese paper (2)
- Chromium (2)
- Clinker substitute (2)
- Coastal protection (2)
- Cockroach (2)
- Colourants (2)
- Compatible solute (2)
- Comsumer good samples (2)
- Concrete (2)
- Condensed Matter Physics (2)
- Conservation (2)
- Consumer products (2)
- Contamination (2)
- Corynetes caeruleus (2)
- Crystallization (2)
- DGT (2)
- Density separation (2)
- Deponie (2)
- Desinfectant (2)
- Diffusive sampling (2)
- Disease (2)
- Disinfectants (2)
- Dry treatment (2)
- Dyes (2)
- E.coli (2)
- Electric Arc Furnace (2)
- Elektroofenstaub (2)
- Emission chamber (2)
- Emission testing (2)
- Emissionen (2)
- Energy Engineering and Power Technology (2)
- Entomopathogen (2)
- Environment (2)
- Environmental condition (2)
- European standard (2)
- Eusociality (2)
- FEM model (2)
- Flow system (2)
- Fluoride (2)
- Formaldehyde (2)
- Forsterite (2)
- Fuel Technology (2)
- Fume (2)
- Fungal biofilms (2)
- Genome sequence (2)
- Geogitter (2)
- Geokunststoffe (2)
- Geruch (2)
- Gichtgasschlamm (2)
- Glass (2)
- Glass scanning (2)
- Group defence (2)
- Gypsum recycling (2)
- HAXPES (2)
- Halomonas CRISPR Ectoine (2)
- Halophile (2)
- Heavy metal removal (2)
- Hi-Tension (2)
- Hydrogen (2)
- In situ (2)
- Infrared spectroscopy (2)
- Ink composition (2)
- Inkwells (2)
- Insect biotechnology (2)
- Interdisciplinary (2)
- Interdisciplinary approach (2)
- Iron (2)
- Iron oxide nanoparticles (2)
- Isoptera (2)
- Keratin (2)
- Knufia (2)
- Korynetes caeruleus (2)
- Lapis lazuli (2)
- Laser Powder Bed Fusion (L-PBF) (2)
- Laser-induced breakdown spectroscopy (2)
- Leaching control mechanisms (2)
- Leaching of waste materials (2)
- Leaching tests (2)
- Leather (2)
- Life history data (2)
- Loading factor (2)
- Low melting (2)
- MOF (2)
- MSWI bottom ash (2)
- Magnesium (2)
- Marble (2)
- Marine littering (2)
- Material emissions (2)
- Mechanochemistry (2)
- Melting experiments (2)
- Metabolomics (2)
- Micro plastic (2)
- Micro-XRF (2)
- Microbial (2)
- Microbiologically influenced corrosion (MIC) (2)
- Microbiome (2)
- Microbiota (2)
- Microorganism (2)
- Micropatterning (2)
- Microplastic (2)
- Microplastics (2)
- Mikrobiell beeinflusste Korrosion (2)
- Model (2)
- Museum (2)
- Museum Pests (2)
- Nano particle (2)
- Nanopartikel (2)
- Neuropeptide (2)
- Nitrification inhibitor (2)
- Non invasive analysis (2)
- Nosema ceranae (2)
- Nutrient (2)
- Optics (2)
- Osmia bicornis (2)
- PGAA (2)
- PIXE (2)
- Particle gas emission (2)
- Particle size (2)
- Particle size distributuion (2)
- Particulate emission (2)
- Per- and polyfluorinated alkyl substances (PFASs) (2)
- Perceived intensity (2)
- Permeable reactive barriers (2)
- Persister cells (2)
- Phopshorus recovery (2)
- Pigment analyses (2)
- Pigment identification (2)
- Plant pathogen (2)
- Plume (2)
- Pollutant (2)
- Pollutants (2)
- Provenance studies (2)
- Pseudomonas aeruginosa (2)
- Purification (2)
- Reactive oxygen species (2)
- Recycling fertiliser (2)
- Recycling fertilisers (2)
- Reduction process (2)
- Reductive amination (2)
- Reference method (2)
- Rembrandt (2)
- Ressourcenrückgewinnung (2)
- Restoration and conservation (2)
- Risk assesment (2)
- Robustness studies (2)
- Sapphire (2)
- Scattering (2)
- Sewage sludge ordinance (2)
- Shale (2)
- Size distribution (2)
- Size resolved chemical composition (2)
- Social immunity (2)
- Soil P species (2)
- Soil-like material (2)
- Solar panel (2)
- Solubility (2)
- Sorption (2)
- Spatter (2)
- Stained glass (2)
- Steelmaking (2)
- Stress (2)
- Structured light scanning (2)
- Subaerial biofilm (2)
- Subaerial biofilms (2)
- Substance release (2)
- Sustainability (2)
- Synchrotron (2)
- Synthetic organic pigments (2)
- Termite phylogeny (2)
- Test Guideline (2)
- Testguideline (2)
- Thermal extraction (2)
- Thermochemical treatment (2)
- Time resolved chemical composition (2)
- Total reflection X-ray spectroscopy (2)
- Transcriptomics (2)
- Tricalcium-silicate (2)
- UV-irradiation (2)
- Vanadium (2)
- Virology (2)
- Waste-to-energy (2)
- Wild bees (2)
- Wooden toys (2)
- Writing inks (2)
- X-Ray fluorescence analyses (2)
- X-ray adsorption near-edge structure (XANES) spectroscopy (2)
- Zink (2)
- genetics (2)
- melanin (2)
- (Semi)arid to humid-temperate natural ecosys (1)
- 13CO2 pulse labeling (1)
- 13th century (1)
- 16S rRNA gene (1)
- 2D nanomaterials (1)
- 3D Printing (1)
- 3D printer (1)
- A Greek palimpsest (1)
- A key interface (1)
- A-DNA conformation (1)
- AEROMET II (1)
- AEROMET project (1)
- AMR (1)
- ASAP-MS (1)
- ATR-FTIR (1)
- Academia (1)
- Accelerated aging (1)
- Accuracy (1)
- Acidobacteria (1)
- Adaptation (1)
- Adaption (1)
- Additive manufacturing (1)
- Advanced groups of termites (1)
- Aerodynamic levitation (1)
- Aerosol element alanysis (1)
- Aerosol element mass concentration (1)
- Aerosol gravimetry (1)
- Aerosol measurement instruments (1)
- Aerosol spectroscopy (1)
- Aerosols (1)
- Aerosolsensor (1)
- Affinity extraction (1)
- Affinity support (1)
- Ag-LDI-MS (1)
- AgBB Bewertung (1)
- Agarose (1)
- Ageing (1)
- Aging (1)
- Aging test (1)
- Aging tests (1)
- Agricultural mycology (1)
- Air analysis (1)
- Air pollution control (1)
- Air quality (1)
- Airborne Particles (1)
- Alexander von Humboldt (1)
- Alite hydraulic reactivity (1)
- Alkali zinc borate glass (1)
- Alkylating agents (1)
- Aluminum (1)
- Aluminum oxide (1)
- Ambient aerosol (1)
- Ambient air (1)
- Ambient air pollution (1)
- Amino acid analysis (1)
- Amphiphilic polymer (1)
- Amplicon sequencing (1)
- Anaerobic pathways (1)
- Analytical Chemistry (1)
- Analytical chemistry (1)
- Analytical screening techniques (1)
- Analytical standards (1)
- Ancient INKS (1)
- Ancient document production (1)
- Animal immune system (1)
- Anodization (1)
- Anti-microbial effects (1)
- Antiadhesive surfaces (1)
- Antibacterial (1)
- Antibacterial coatings (1)
- Antibacterial polymer (1)
- Antibacterial surfaces (1)
- Antibiotic (1)
- Antibiotic resistance (1)
- Antibody purification (1)
- Antifouling (1)
- Antimicrobial Resistance (1)
- Antimicrobial materials (1)
- Antimicrobial test (1)
- Antimicrobial testing (1)
- Antimony black (stibnite) (1)
- Antiseptic agents (1)
- Aquatic fungi (1)
- Aqueous synthesis (1)
- Arabic recipes (1)
- Arbuscular mycorrhiza (1)
- Archaeological provenance (1)
- Archaeometric studies (1)
- Aromatic amino acid analysis AAAA (1)
- Aromatic amino acid analysis aaaa (1)
- Artificial weathering (1)
- Ascomycetes (1)
- Ascosphaera apis (1)
- Ashdec (1)
- Aspergillus (1)
- Aspergillus flavus (1)
- Assessment (1)
- Astrobiology (1)
- Atomic force microscopy (1)
- Autoclave tests (1)
- Automated analysis (1)
- BESSY (1)
- BFR (1)
- BODIPY (1)
- BODIPY dye (1)
- BSA (1)
- BTEX (1)
- Bacillus subtilis (1)
- Bacteria repellent surfaces (1)
- Bacteria-repellent surfaces (1)
- Bacterial cell cycle (1)
- Bacterial growth (1)
- Bacterial infection (1)
- Bacterial second messenger (1)
- Baltic Sea (1)
- Bankia sp (1)
- Basidiomycetes (1)
- Basin (1)
- Batch tests (1)
- Bathyarchaeia (1)
- Bauxite residue (1)
- Bawit (1)
- Bee diseases (1)
- Bee health (1)
- Bees (1)
- Behavioural mechanisms (1)
- Beneficial microbes (1)
- Beschichtung (1)
- Beständigkeit (1)
- Bio-based insulation (1)
- Bio-receptive (1)
- Bioactive glass (1)
- Bioavailability (1)
- Bioceramics (1)
- Biocides in the environment (1)
- Bioconjugation (1)
- Biodegradation (1)
- Biodeterioration and biodegradation (1)
- Biofilm quantification (1)
- Bioilm (1)
- Bioinformatics virology viruses software (1)
- Biokorrosion (1)
- Biological Control (1)
- Biological control (1)
- Biologically induced mineral weathering (1)
- Biomimetic (1)
- Bioseparation (1)
- Biosphere (1)
- Biosphere-technosphere interaction (1)
- Biotests (1)
- Biotic environment (1)
- Biphasic growth (1)
- Black Ink (1)
- Black microcolonial fungi (1)
- Black writing ink (1)
- Blast-furnace sludge (1)
- Blue Angel ecolabel (1)
- Bodenbelag (1)
- Book production (1)
- Botrytis (1)
- Bovine serum albumin (1)
- Building Material (1)
- Building material (1)
- Building materials (1)
- Building product (1)
- Building products (1)
- Built environment (1)
- Bushveld Complex (1)
- Byzantine manuscript (1)
- C-di-GMP (1)
- CCQM (1)
- CEC-L-103 (1)
- CFRP (1)
- CHC (1)
- CIC (1)
- COST Action (1)
- COST action CA15114 AMICI (1)
- COVID (1)
- CPC calibration (1)
- CRISPR dCas9 (1)
- CRISPR/Cas9 (1)
- CRM (1)
- CaNaPO4 (1)
- Calcareous deposits (1)
- Calcium carbonate (1)
- Calibration (1)
- Calibration transfer (1)
- Carolingian (1)
- Carotenoids (1)
- Carrier (1)
- Cascade impector (1)
- Cast iron (1)
- Cathodic protection (1)
- Cell appendages (1)
- Cell studies (1)
- Cell-envelope (1)
- Cellulose ether (1)
- Cellulose synthase (1)
- Cerium oxide (1)
- Chamber measurement (1)
- Chamber-test (1)
- Characterisation (1)
- Characterization (1)
- Chemical composition (1)
- Chemical ecology (1)
- Chemical extraction (1)
- Chemical extraction methods (1)
- Chemical recycling (1)
- Chemicals (1)
- Chicken manure (1)
- Chicken manure ash (1)
- Chilean Coastal Cordillera (1)
- Chinese Paper (1)
- Chlorination (1)
- Chlorine (1)
- Chromitites (1)
- Circular Economy (1)
- Clean steel (1)
- Cleridae (1)
- Climate gradient (1)
- Climate responsive materials (1)
- Cloning vectors (1)
- Close proximity to colonies (1)
- Co-combustion (1)
- Cobalt (1)
- Cockroaches (1)
- Codex (1)
- Codex Miscellaneus (1)
- Codicology (1)
- Cognitive performance (1)
- Coleoptera (1)
- Colorants (1)
- Colored glasses (1)
- Colouring (1)
- Combustion and gasification (1)
- Community composition (1)
- Community-level interactions (1)
- Comparison (1)
- Concept (1)
- Conditioning layer (1)
- Confocal microscopy (1)
- Coniophora puteana (1)
- Conjugate (1)
- Conjugation (1)
- Constantinomyces (1)
- Construction Products (1)
- Construction and demolition waste (1)
- Construction materials (1)
- Construction product (1)
- Construction products regulation (CPR) (1)
- Consumer article (1)
- Consumer articles (1)
- Contaminant transfer (1)
- Contraction (1)
- Control (1)
- Controllable gene expression (1)
- Controlled atmosphere (1)
- Controlled release fertilisers (1)
- Copper (1)
- Copper-based wood preservatives (1)
- Coptic manuscripts (1)
- Coptic papyri (1)
- Coptic studies (1)
- Coptotermes (1)
- Core microbiome (1)
- Core/shell nanoparticle (1)
- Corona (1)
- Corrosion product (1)
- Corundum (1)
- Cribellate spiders (1)
- Crispr-Cas9 (1)
- Crispr/Cas9 (1)
- Critical raw materials (1)
- Cross-feeding (1)
- Cross-sectioning (1)
- Cryo XPS (1)
- Cryptoendolithic black fungus (1)
- Crystalline phase identification (1)
- CuNPs (1)
- Cubical shape (1)
- Cultural Entomology (1)
- Cultural Heritage (1)
- Culuative energy demand (1)
- Cupriavidus campinensis (1)
- Cuticular hydrocarbons (1)
- Cyanobacteria (1)
- DNA barcode (1)
- DNA polymerase (1)
- DSLT (1)
- DSM 5009 (1)
- Damage repair (1)
- De novo assembly (1)
- Decomposition point (1)
- Degradable polymer (1)
- Dendrimer (1)
- Denitrification (1)
- Deponiebau (1)
- Desert ecology (1)
- Desiccation (1)
- Deterioration (1)
- Developing building materials (1)
- Development (1)
- Dielectric heating (1)
- Dietary adaptation (1)
- Differential expression (1)
- Differential gene expression analysis (1)
- Diffractive gratings (1)
- Diffusive Gradients in Thin-films (DGT) (1)
- Digitalisation (1)
- Direct laser writing (1)
- Direct material input (1)
- Disinfection Fuel (1)
- Dispay case (1)
- Dispersion of carbon pigments (1)
- Display case (1)
- Disposal (1)
- Diversity (1)
- Dothideomycetes (1)
- Downstream processing (1)
- Draft Genome (1)
- Drawing (1)
- Driving rain (1)
- Drywood termite (1)
- DsRNA (1)
- Durability (1)
- Dye (1)
- Dyes and pigments (1)
- Dynamic calibration gas mixtures (1)
- Dynamic surface leaching test (1)
- E$volution (1)
- EAF slags (1)
- EDX Analysis (1)
- EN 717-3 (1)
- EOF (1)
- EOF/AOF (1)
- EU EMPIR (1)
- EU regulations (1)
- Early european inks (1)
- Earthen building materials (1)
- Eco-efficiency analysis (1)
- Ecology (1)
- Ecotoxicity testing (1)
- Ecotoxicity tests (1)
- Ecotoxicological tests (1)
- Ecotoxixity (1)
- Edible insects (1)
- Effective uptake rate (1)
- Efficacy (1)
- Efflux (1)
- Egypt (1)
- Electric arc furnace (EAF) slags (1)
- Electric arc furnace slags (1)
- Electrochemical remediation (1)
- Electronic (1)
- Electronic Lab Notebook (ELN) (1)
- Element analysis (1)
- Element mass concetration (1)
- Elemental aerosol analysis (1)
- Elemental composition (1)
- Eluates (1)
- Emerging Contaminants (1)
- Emission Test Chamber (1)
- Emission Testing (1)
- Emission chamber testing (1)
- Emission chambers (1)
- Emission test chamber procedure (1)
- Emission test method (1)
- Emissions of hazardous gases (1)
- Emisson testing (1)
- Enamel colors (1)
- Enamels (1)
- Entomopathogenic Fungus (1)
- Entropy (1)
- Environmental Chemistry (1)
- Environmental Engineering (1)
- Environmental assessment (1)
- Environmental conditions (1)
- Environmental friendly (1)
- Environmental impact (1)
- Environmental simulations (1)
- Epidemal layer (1)
- Erfurt (1)
- Essential oils (1)
- European research area (1)
- Eurotiomycetes (1)
- Exergy (1)
- Exocrine gland (1)
- Expansion (1)
- Experimental evolution (1)
- Exposure (1)
- Exposure risk (1)
- External (1)
- Extracellular enzymes (1)
- Extractable organic fluorine (1)
- Extraction (1)
- Extreme environments (1)
- Extremophile (1)
- Extremophiles (1)
- Extremophilic fungi (1)
- F pili (1)
- FAT class concept (1)
- FFF-3D printer (1)
- FFF-3D printing (1)
- FFF-filament (1)
- FFF-printing (1)
- FT-Raman (1)
- FTIR (1)
- FTIR spectroscopy (1)
- FactSage calculations (1)
- FactSageTM calculations (1)
- Fakes (1)
- Family archives (1)
- Faraday cup aerosol electrometer (1)
- Fatigue (1)
- Façade (1)
- Feeding behaviour (1)
- Femtosecond laser processing (1)
- Fenton-like reaction (1)
- Fiber (1)
- Fibre (1)
- Fibre analysis (1)
- Filament comparison (1)
- Fire-retardant paint (1)
- Flask method (1)
- Flexible shadow masks (1)
- Flow chamber system (1)
- Flow-System (1)
- Flow-system (1)
- Fluor XANES (1)
- Fluorescence spectroscopy (1)
- Fluorescent microscopy (1)
- Fluorescent proteins (1)
- Fluoride nanoparticles (1)
- Fluorides (1)
- Fluorolytic sol-gel synthesis (1)
- Fluorolytic sol−gel (1)
- Fluorometric sensing (1)
- Food (1)
- Food fermentation (1)
- Food safety (1)
- Force distance curve (1)
- Forest fires (1)
- Forest soils (1)
- Forgery (1)
- Formation enthalpy (1)
- Foward genetics (1)
- Fractal structure (1)
- Fractional factorial (1)
- Fragmented manuscripts (1)
- Fuel sorption (1)
- Functionalized graphene (1)
- Fungal decay (1)
- Fungal stress mechanisms and responses (1)
- Fungicidal property (1)
- Fungiculture (1)
- Fusarium (1)
- GAeF (1)
- GC-FID (1)
- GC-MS (1)
- GDL (1)
- GNBP-2 (1)
- Gas analysis (1)
- Gas chromatography - mass spectrometry (GC-MS) (1)
- Gas sensing (1)
- Gas storage (1)
- Gene expression (1)
- Gene network (1)
- General Chemistry (1)
- General Environmental Science (1)
- General Materials Science (1)
- General Medicine (1)
- Genetic engineering (1)
- Genetic tools (1)
- Genome (1)
- Genome editing (1)
- Geobiology (1)
- Geological formation (1)
- Geology (1)
- Geomembranes (1)
- Geruchsmessung (1)
- Giulio Romano (1)
- Glass paints (1)
- Global radiation (1)
- Gold (1)
- Gothic incursions (1)
- Granulat (1)
- Graphene (1)
- Graphene–bacteria interaction (1)
- Gray mold fungus (1)
- Green facades (1)
- Green pesticide (1)
- Greenhouse gas accounting (1)
- Greenhouse gas balance (1)
- Greenhouse gas mitigation (1)
- Grouts (1)
- Growth-rate homeostasis (1)
- Gut symbionts (1)
- Gypsum fiberboards and synthetic gypsum (1)
- Gypsum plasterboards (1)
- Gypsum waste (1)
- HI-Tension (1)
- HR-CS-GFMAS (1)
- Halogenation (1)
- Halophilic (1)
- Halophilic bacteria (1)
- Hazardous waste (1)
- Haze Samples (1)
- Hazenite (1)
- Headspace GC-MS (1)
- Health, Toxicology and Mutagenesis (1)
- Healthcare (1)
- Heat capacity (1)
- Heat maps (1)
- Heavy metal free (1)
- Heavy metals (1)
- Hebrew studies (1)
- Hellenistic (1)
- Herbaspirillum seropedicae (1)
- Herculaneum papyri (1)
- Hermopolis (1)
- Herteogeneous phenotypes (1)
- Heterologous expression (1)
- High density polyethylene (1)
- High salinity (1)
- Historic buildings (1)
- Historic ink (1)
- History of Art (1)
- Holy Family (1)
- Holzschutzmittel (1)
- Honey bee (1)
- Honeybee (1)
- Hospital premises (1)
- Host and symbiont ecology (1)
- Host immunity (1)
- Household waste (1)
- Human plasma (1)
- Hydration products (1)
- Hydraulic engineering (1)
- Hydrogen permeation (1)
- Hydrogen storage (1)
- Hydrogenasen (1)
- Hydrophobic interaction (1)
- Hygienic behavior (1)
- Hylotrupes bajulus (1)
- Hylotrupes bajulus, Anobium punctatum, natural durability, tropical wood, native wood. (1)
- Hyperarid (1)
- Hyperbranched polymer (1)
- Hypermutation (1)
- Hypopharynx (1)
- IAQ (1)
- ICP-OES (1)
- IEQ (1)
- IPM in museums (1)
- IR spectroscopy (1)
- ISO 22196 (1)
- ISO REMCO (1)
- ISO/TC 229 Nanotechnologies (1)
- ISO22196 (1)
- ITS region (1)
- Idiopathic environmental intolerance (1)
- Igg (1)
- Illness-induced anorexia (1)
- Illuminated manuscripts (1)
- Immune gene prediction (1)
- ImmunoDB (1)
- Immunoglobulins (1)
- Immunoprecipitation (1)
- Implants (1)
- In situ synchrotron x-ray diffraction (1)
- In-situ Process Monitoring (1)
- In-vivo mutagenesis (1)
- Incubated soil/fertilizer mixtures (1)
- Indirect photolysis (1)
- Indoor Air Quality (1)
- Indoor Air: Adsorbent performance (1)
- Indoor Products (1)
- Indoor air (1)
- Indoor emission (1)
- Indoor mycobiome (1)
- Industrial and Manufacturing Engineering (1)
- Industrial applications (1)
- Industrial mycology (1)
- Infecting a number of insects, (1)
- Infections (1)
- Infrared thermography (1)
- Initial attachment (1)
- Ink corrosion (1)
- Ink fingerprint (1)
- Ink terminology (1)
- Insect evolution (1)
- Insecticide (1)
- Instrumentation (1)
- Integrated Museum Pest Management (IMPM) (1)
- Inter-comparison (1)
- Inter-lab comparison (1)
- Inter-laboratory test (1)
- Intercomparison (1)
- Interdisciplinarity (1)
- Internal pores (1)
- Intraparticle diffusion (1)
- Intumescent coating (1)
- Iodine (1)
- Ionic liquid (1)
- Ionizing radiation (1)
- Iron gall ink (1)
- Iron making (1)
- Iron oxide (1)
- Iron scrap (1)
- Isotopes (1)
- Issues (1)
- Jewish cultures (1)
- Jig (1)
- Joint grouts (1)
- Knock-out mutant (1)
- Kunststoffdichtungsbahnen (1)
- LC-MS/MS (1)
- LCA (1)
- LCC (1)
- LIBS (1)
- Laboratory breeding (1)
- Labrum (1)
- Laccase (1)
- Lake Cadagno (1)
- Landfill (1)
- Landfill lining (1)
- Laser Printer (1)
- Laser printer emission (1)
- Laser structuring (1)
- Laser-induced nanostructures (1)
- Laser-induced pariodic surface structures (1)
- Laser-induced periodic surface structueres (LIPPS) (1)
- Laser-modified surface (1)
- Layer-by-Layer (1)
- Lead (1)
- Lead books (1)
- Leonardo da Vinci (1)
- Lfe cycle assessment (1)
- Library pests (1)
- Lifetime (1)
- Light regulation (1)
- Light sensing (1)
- Light-induced stress (1)
- Lightning talk (1)
- Lightweighting (1)
- Lignocellulose (1)
- Limit values (1)
- Limitations (1)
- Limnoria spp (1)
- Linker (1)
- Low alloy steel (1)
- Low cost aerosol PM sensor (1)
- Low melting glasses (1)
- Low-molecular-weight organic substances (1)
- Low-tech approach (1)
- Luftgüte (1)
- Lysimeter, Antimony (1)
- MDG ICP-ToF-MS (1)
- MIC Island (1)
- MIC projekt (1)
- MSWI Bottom Ash (1)
- MSWI fly ash (1)
- Major transition (1)
- Manuscript making (1)
- Map production and publishing (1)
- Maps and colours (1)
- Marek's Disease Virus (1)
- Marek's virus (1)
- Marine borers (1)
- Market surveillance (1)
- Mask fabrication (1)
- Mass spectrometry (1)
- Mass spectroscopy (1)
- Material Analysis (1)
- Material analysis (1)
- Material degradation (1)
- Material emissions testing (1)
- Material recycling (1)
- Material surface colonisation (1)
- Materials (1)
- Materials Chemistry (1)
- Materials emissions testing (1)
- Materials flow (1)
- Mathematical analysis (1)
- Mathematical modelling (1)
- Mechanische Stabilität (1)
- Mechanisms of pathogenesis (1)
- Mechanosensitive channel (1)
- Medical mycology (1)
- Medieval glasses (1)
- Medieval-stained glass (1)
- Melanin Adhesion (1)
- Melanins (1)
- Melting point (1)
- Melting temperature (1)
- Metabolic engineering (1)
- Metabolic flux analysis (1)
- Metabolic modeling (1)
- Metadata (1)
- Metal organic frameworks (1)
- Metal recovery (1)
- Metal reducing bacteria (1)
- Metallic silver precipitates (1)
- Metalls (1)
- Metals (1)
- Metals and Alloys (1)
- Metarhizium (1)
- Metarhizium robertsii DSM 1490 (1)
- Methane (1)
- Methanogenesis (1)
- Methods of scientific analysis (1)
- Microbe (1)
- Microbial abundance (1)
- Microbial adhesions (1)
- Microbial communities (1)
- Microbial community modelling (1)
- Microbial simulation, (1)
- Microbially Induced Corrosion (1)
- Microbially induced carbonate precipitation (MICP) (1)
- Microbiologically Influrenced Corrosion (MIC) (1)
- Microchamber (1)
- Microdroplet generator (1)
- Microfluidics (1)
- Micromonospora aurantiaca (1)
- Microwaves (1)
- Migration (1)
- Mikrobiell (1)
- Mikroplastik (1)
- Millipedes (1)
- Mineral (1)
- Mineral weathering (1)
- Mining (1)
- Mircobially influcenced corrosion (1)
- Mixed Inks (1)
- Mixture toxicity (1)
- Mobile anodisation (1)
- Mobile application (1)
- Model aerosols (1)
- Model organism (1)
- Modeling (1)
- Modern painting (1)
- Modified mycotoxins (1)
- Moisture (1)
- Moisture performance (1)
- Molecular (1)
- Molecular Organic Frameworks (1)
- Molecular clock (1)
- Molecular identification (1)
- Molybdenum (1)
- Monoterpene (1)
- Moriscos (1)
- MscS (1)
- Mud volcanoe fluids (1)
- Multi-resistant bacteria (1)
- Multi-scale study (1)
- Multicellularity (1)
- Multidisciplinary (1)
- Multilocus phylogeny (1)
- Multiple Displacement Amplification (1)
- Multiple chemical sensitivity (1)
- Multiple lines of evidence (1)
- Multiport (1)
- Municipal sewage sludge (1)
- Municipal solid waste (1)
- Museum insect pest (1)
- Museum pests (1)
- Mussel-inspired coating (1)
- Mussel-inspired materials (1)
- Mutagenesis (1)
- MySpot (1)
- Mycotoxin (1)
- Mycotoxins (1)
- Müllverbrennung (1)
- N and K analog tracer (1)
- NDT (1)
- NFDI (1)
- NGS (1)
- NIR imaging (1)
- NIR reflectography (1)
- Nano CRM (1)
- Nano Particles (1)
- Nano characterization (1)
- Nano metal fluorides (1)
- Nano-Fourier-transform infrared spectroscopy (1)
- Nano-materials (1)
- Nano@BAM (1)
- Nanobiocide (1)
- Nanocarrier (1)
- Nanocoating (1)
- Nanoplattform (1)
- Nanopowder (1)
- Nanorods (1)
- Natural abundance of 15N (1)
- Natural durability (1)
- Natural ecosystems (1)
- Natural products discovery (1)
- Near ambient pressure XPS (1)
- Near ambient x-ray photoelectron spectroscopy (1)
- Near-infrared refectography (1)
- New exocrine organ (1)
- Next generation sequencing (1)
- Nickel (1)
- Niobium (1)
- Nitrate (1)
- Nitrogen fixation (1)
- Nitrogen uptake (1)
- Nitrososphaerales (1)
- Nitrous oxide (1)
- Non-destructive Materials (1)
- Non-destructive test (1)
- Non-ferrous metals (1)
- Non-invasive (1)
- Non-invasive scientific methods (1)
- Non-vitriolic iron-gall inks (1)
- Nonspecific binding (NSB) (1)
- Nonvolatile (1)
- Nostoc (1)
- Nostoc punctiforme (1)
- Novel sample preparation techniques (1)
- Nuclear waste disposal (1)
- Nutrient acquisition (1)
- Nutrient cycles (1)
- Nutrient uplift and recyclin (1)
- Nährstoffe (1)
- OIT (1)
- Oddy test (1)
- Office machines (1)
- Oil (1)
- Oil and gas industry (1)
- Oil and gas reservoir (1)
- Oilfield (1)
- On-line analysis (1)
- One-step ionic liquids synthesis (1)
- Open data (1)
- Operating Procedure (1)
- Optical and Magnetic Materials (1)
- Optical properties (1)
- Ordinance on Contaminated Sites and Soil Protection (1)
- Organic contaminants (1)
- Organic phosphorus breakdown (1)
- Organo fluorine analysis (1)
- Osmophobic effect (1)
- Osmotic shock (1)
- Osteogenesis (1)
- Oxide melts (1)
- P sink method (1)
- P speciation (1)
- P-efficiency (1)
- P-recovery (1)
- P. Fluorescens (1)
- PAH (1)
- PAK (1)
- PE-HD (1)
- PFAS analysis (1)
- PFAS analytics (1)
- PM (1)
- PM monitors (1)
- PP (1)
- PS (1)
- PV modules (1)
- Painting (1)
- Paints (1)
- Palaeography (1)
- Palimpsest (1)
- Paper (1)
- Paper sizings (1)
- Paper tinting (1)
- Particle (1)
- Particle Size (1)
- Particle emission (1)
- Particle synthesis (1)
- Particulate emissions (1)
- Partikel (1)
- Partikeln (1)
- Parylene C (1)
- Pathogen spillover (1)
- Pathogen transmission (1)
- Pathogen virulence (1)
- Pentimenti (1)
- Peptide-derived components (1)
- Per- and polyfluorinated alkly substances (PFASs) (1)
- Per- and polyfluoroalkyl substances (PFAS) (1)
- Perfluorierte Verbindungen (1)
- Perfluorocarboxylic acid (PFCA) (1)
- Performance (1)
- Performance comparison (1)
- Periodate oxidation (1)
- Permeability (1)
- Persian historical recipes (1)
- Persian manuscript (1)
- Pest control (1)
- Pesticides (1)
- Phase formation (1)
- Phase separation (1)
- Phase transformation (1)
- Phenotypic heterogeneity (1)
- Phenotypic variation (1)
- Phoshpor availability (1)
- Phosphate dynamics (1)
- Phosphate extractability and availability (1)
- Phosphonic acids (1)
- Phosphorous recovery (1)
- Phosphorus K-edge-XANES spectroscopy (1)
- Phosphorus availability (1)
- Phosphorus elimination (1)
- Phosphorus plant-availability (1)
- Phosphorus recycling (1)
- Phosphous recovery (1)
- Photocatalytic surfaces (1)
- Photodynamic therapy (1)
- Photometric P determination (1)
- Photonics (1)
- Photoperception (1)
- Photoreceptors (1)
- Phototrophic bacteria (1)
- Phototrophs (1)
- Phyllosphere (1)
- Physical and optical characteristics (1)
- Pilot comparison (1)
- Plant Experiment (1)
- Plant availability (1)
- Plant economic spectrum (1)
- Plant growth test (1)
- Plant-availability (1)
- Plasma (1)
- Plastic biofilm (1)
- Plastic degradation (1)
- Plastic pollution (1)
- Plastic waste (1)
- Platinum (1)
- Poficiency test (1)
- Pollution (1)
- Polydopamine (1)
- Polyelektrolyt (1)
- Polyethylene terephthalate (1)
- Polyfluorinated alcohol (PFOH) (1)
- Polyioinic liquid (1)
- Polymer (1)
- Polymer foils (1)
- Polymer-based products (1)
- Polymerase mutant (1)
- Polypropylene (1)
- Polystyrene (1)
- Polyurethanes (1)
- Porosity (1)
- Portrayal of St Joseph (1)
- Poster presentation (1)
- Pot experiment (1)
- Pot experiments (1)
- Potential toxic elements (1)
- Preferential binding (1)
- Preferential exclusion (1)
- Preservation (1)
- Probiotic-based vaccines (1)
- Probiotics (1)
- Process Metallurgy (1)
- Process control (1)
- Process development (1)
- Process monitoring (1)
- Process upscaling (1)
- Proficiency Test (1)
- Proficiency testing (1)
- Proofreading deficient (1)
- Prospective risk assessment (1)
- Protective glazing (1)
- Protein (1)
- Protein a (1)
- Protein hydrolysis (1)
- Protein immobilization (1)
- Protein quantification (1)
- Proteome (1)
- Proteomics (1)
- Pseudomonas (1)
- Pseudomonas fluorescens (1)
- Pseudomonas veronii (1)
- Ptinidae (1)
- Public Health, Environmental and Occupational Health (1)
- Push-out Test (1)
- Pyrolysis (1)
- QA/QC (1)
- Quality assurance/quality control (1)
- Quantum dot (1)
- Quasispecies (1)
- REACH (1)
- RNA extraction (1)
- RNA interference (1)
- RNA-Seq (1)
- RNA-Sequencing (1)
- RNAi (1)
- Radio waves (1)
- Radiocarbon (1)
- Radon (1)
- Radon exhalation (1)
- Raphael school (1)
- Reactor conditions (1)
- Real-time qPCR (1)
- Recipes (1)
- Recovery potential (1)
- Recovery rate (1)
- Recycled gypsum (1)
- Recycled sources (1)
- Red chalk (1)
- Red mud (1)
- Reduction (1)
- Reductive decomposition (1)
- Reductive defluorination (1)
- Reductive iron assimilation (1)
- Reference data (1)
- Reference nanoparticles (1)
- Reference organisms (1)
- Reference procedures (1)
- Reference samples (1)
- Regulation (1)
- Release kinetics (1)
- Research Data Infrastructure (1)
- Research Data Management (1)
- Resistance model (1)
- Resource Recovery (1)
- Resources (1)
- Reverse painting on glass (1)
- Reverse paintings on glass (1)
- Reworking (1)
- Rhenanite (1)
- Rhizopus (1)
- Rhizopus and Aspergillus oryzae (1)
- Rhizosphere (1)
- Rhizosphere effect (1)
- Rhizosphere processes (1)
- Rhodonia placenta (1)
- Rice (1)
- Road construction waste (1)
- Robustness validation (1)
- Rock biofilm (1)
- Rock leaching (1)
- Rock-inhabiting black fungi (1)
- Rock-inhabiting fungi (1)
- Root economics space (1)
- Rostral gland (1)
- Rround robin test (1)
- Ruthenium (1)
- SARS (1)
- SAXS (1)
- SCALE (1)
- SDS-PAGE (1)
- SEM (1)
- SEM micrography (1)
- SEM wood characterization (1)
- SEM-EDS (1)
- SERS (1)
- SIMS (1)
- SOP (1)
- SPE extraction (1)
- SRB (1)
- SVOC (1)
- Safety (1)
- Salts (1)
- Sample preparation (1)
- Sanierung (1)
- Sc recovery (1)
- Scanning micro-X-ray fluorescence (1)
- Scattering-type scanning near-field optical microscopy (s-SNOM) (1)
- Schwermetalle (1)
- Scribal corrections (1)
- Scythica Vindobonensia, (1)
- Secondary P-fertilizer (1)
- Secondary Recources (1)
- Secondary metabolism (1)
- Secondary metabolites (1)
- Secondary raw materials (1)
- Secondary resources (1)
- Sediment (1)
- Selection (1)
- Selective Chlorination (1)
- Selective quantification (1)
- Self-assembled monolayer (1)
- Self-assembled monolayer (SAM) (1)
- Self-assembled monolayers (SAM) (1)
- Semivolatile organic compounds (1)
- Sensors (1)
- Separate collection (1)
- Sequence annotation (1)
- Sets of archaeometric data (1)
- Sewage Sludge (1)
- Sewage Sludge Ashes (1)
- Sewage extraction (1)
- Sewage sludge ash (SSA) (1)
- Sewage sludge disposal (1)
- Sewage sludge incineration (1)
- Short crack propagation (1)
- Siderophore (1)
- Signal transduction (1)
- Silica and polystyrene nanoparticles (1)
- Silicate (1)
- Silicon carbide (1)
- Silver (1)
- Silver diffusion (1)
- Simulation (1)
- Simulation of materials degradation (1)
- Single cell microbiology (1)
- Sintering (1)
- Sixteenth-century painting technique (1)
- Size exclusion chromatography (1)
- Sizing (1)
- Small angle x-ray scattering (1)
- Smartphone (1)
- Social Immunity (1)
- Social insect (1)
- Social insects (1)
- Sociality (1)
- Software (1)
- Soil contact (1)
- Soil extraction (1)
- Soil incubation study (1)
- Soil-feeding habit (1)
- Soil-like materials (1)
- Soils (1)
- Solar panels (1)
- Solar parks (1)
- Soldier (1)
- Solid phase (1)
- Solid phase extraction (SPE) (1)
- Solid-liquid extraction (1)
- Solid-phase extraction (SPE) (1)
- Solitary bees (1)
- Solute excretion (1)
- Solvents (1)
- Solvolysis (1)
- Spectral imaging (1)
- Stained glass windows (1)
- Stained glasses (1)
- Stainless steel (1)
- Stakeholder (1)
- Standardized test and quantification procedure (1)
- Steelmaking residues (1)
- Stoichiometric homeostasis (1)
- Stone cultural heritage (1)
- Stop/flow experiments model (1)
- Strategy and Management (1)
- Stress conditions (1)
- Structural color (1)
- Sub-4nm particles (1)
- Subjective complaints (1)
- Subsocial (1)
- Subsoil nutrient tracing (1)
- Sugar cane bagasse (1)
- Sugarcane bagasse (1)
- Sum parameter (1)
- Sum parameter analyis (1)
- Sum parameter analysis (1)
- Superhydrophilic surface (1)
- Superhydrophobic surface (1)
- Suppression (1)
- Surface chemistry (1)
- Surface functionalization (1)
- Surface interactions (1)
- Surface water (1)
- Surface waters (1)
- Surfacewaters (1)
- Survival rates (1)
- Synchotron (1)
- Synchrotron radiation (1)
- Synchrotron-XPS (1)
- Synergy (1)
- Synthesis (1)
- Synthetic metabolism (1)
- Systematics (1)
- TED-GC/MS (1)
- TEM (1)
- TXRF ambient air aerosol chemical analysis aerosol element composition (1)
- Tanning (1)
- Tannins (1)
- Targeted and nontargeted (1)
- Taxonomy (1)
- Temperate rain forest (1)
- Temple Scroll (1)
- Tems (1)
- Terbutryn (1)
- Teredo sp (1)
- Termite control (1)
- Termite-associated microbes (1)
- Termitoidae (1)
- Test method (1)
- Test strip (1)
- Teststreifen (1)
- Text analysis (1)
- Thermal Desorption (1)
- Thermal Extraction (1)
- Thermal analysis (1)
- Thermal degradation (1)
- Thermal imaging (1)
- Thermal properties (1)
- Thermo-desorption (1)
- Thermocouple (1)
- Thermodynamic (1)
- Thermoplastic filaments (1)
- Thioimidazolium (1)
- Tinting (1)
- ToF SIMS (1)
- ToF-SIMS (1)
- Tomography (1)
- Torah (1)
- Torah Scrolls (1)
- Torah scrolls (1)
- Touch surfaces (1)
- Trait-based ecology (1)
- Transmission electron microscopy (1)
- Transport modeling (1)
- Transposon (1)
- Tripartite interactions (1)
- Typology of Inks (1)
- Tyrosine (1)
- UV absorption (1)
- UV protection (1)
- UV tolerance (1)
- UV-VIS Reflectance spectroscopy (1)
- UV-VIS reflectance spectroscopy (1)
- Ultrashort PFAS (1)
- Ultrashort laser processing (1)
- Ultrastructure (1)
- Umweltmessung (1)
- Up-cycling (1)
- Uptake rate (1)
- Uranium (1)
- Uranium mining (1)
- Urban mining (1)
- Ureolytic bacteria (1)
- Utilisation (1)
- Utilization (1)
- VAMAS (1)
- VIS (1)
- VOC Emission (1)
- VOC Emissionen (1)
- VOC emission (1)
- VOC transfer standards (1)
- VOC-Emission (1)
- Validation trial (1)
- Vasari (1)
- Velocimetry (1)
- Vienna manuscript (1)
- Viruses (1)
- Vitriolic iron-gall inks (1)
- Volatile organic compound (1)
- Volatile organic compounds (VOC) (1)
- Vues des Cordillères (1)
- WKI flask method (1)
- Waste incineration (1)
- Waste water (1)
- Waste water treatment (1)
- Water (1)
- Water atmosphere (1)
- Water contact (1)
- Water stable isotope analysis (1)
- Water uptake (1)
- Weathering tests (1)
- Weld fatigue (1)
- Weld toe geometry (1)
- Wet-mechanical treatment (1)
- White-rot fungi (1)
- Wood Modification (1)
- Wood ash (1)
- Wood samples (1)
- Writing Ink (1)
- Writing materials (1)
- X-Ray analysis (1)
- X-Ray fluorescence (1)
- X-ray based techniques (1)
- X-ray diffraction (XRD) (1)
- X-ray fuorescence (1)
- X-ray spectroscopic techniques (1)
- X-ray spectroscopy (1)
- X-ray tomographic (1)
- X-rays (1)
- XRF Analysis (1)
- XRF imaging (1)
- XRF ink analysis (1)
- XRF-, VIS- FTIR-spectroscopy (1)
- Xestobium rufovillosum (1)
- Yeast (1)
- ZIF (1)
- ZIF-8 (1)
- Zearalenone (1)
- Zearalenone sulfate (1)
- Zeolite (1)
- Zeolithe (1)
- Zinc chloride (1)
- Zinc oxide (1)
- a-zearalenol (1)
- biocide tolerance (1)
- black fungi (1)
- black fungus (1)
- carotenoids (1)
- disinfection (1)
- dsDAN monolayer (1)
- evolution (1)
- fertilizer (1)
- fs-laser processing (1)
- fungus (1)
- genomics (1)
- heterogeneity (1)
- historic inks (1)
- iChip (1)
- individual-based modelling (1)
- infrared spectroscopy (1)
- ink (1)
- mRNA-seq (1)
- microspectroscopy (1)
- multi scale testing (1)
- natural ventilation (1)
- openBIS (1)
- pH probe (1)
- papyrus (1)
- pigmentation (1)
- qPCR (1)
- soil (1)
- underexplored phyla (1)
- x-ray diffraction (1)
- ‘Green’ pesticide (1)
Organisationseinheit der BAM
- 4 Material und Umwelt (805)
- 4.1 Biologische Materialschädigung und Referenzorganismen (238)
- 4.5 Kunst- und Kulturgutanalyse (128)
- 4.3 Schadstofftransfer und Umwelttechnologien (127)
- 4.2 Material-Mikrobiom Wechselwirkungen (121)
- 4.0 Abteilungsleitung und andere (120)
- 4.4 Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung (107)
- 6 Materialchemie (81)
- 1 Analytische Chemie; Referenzmaterialien (62)
- 6.1 Oberflächen- und Dünnschichtanalyse (32)
- 6.2 Material- und Oberflächentechnologien (31)
- 1.1 Anorganische Spurenanalytik (19)
- 1.4 Prozessanalytik (19)
- 6.3 Strukturanalytik (19)
- 1.7 Organische Spuren- und Lebensmittelanalytik (18)
- 5 Werkstofftechnik (17)
- 7 Bauwerkssicherheit (16)
- 7.1 Baustoffe (12)
- 1.8 Umweltanalytik (10)
- 8 Zerstörungsfreie Prüfung (10)
- 4.6 Molekulare und angewandte Entomologie (8)
- 5.4 Multimateriale Fertigungsprozesse (8)
- 7.4 Baustofftechnologie (8)
- 9 Komponentensicherheit (8)
- 1.2 Biophotonik (7)
- 1.9 Chemische und optische Sensorik (7)
- 8.0 Abteilungsleitung und andere (6)
- 5.1 Mikrostruktur Design und Degradation (5)
- 1.0 Abteilungsleitung und andere (4)
- 5.3 Polymere Verbundwerkstoffe (4)
- 8.1 Sensorik, mess- und prüftechnische Verfahren (4)
- 9.3 Schweißtechnische Fertigungsverfahren (4)
- 1.5 Proteinanalytik (3)
- 6.6 Physik und chemische Analytik der Polymere (3)
- 7.5 Technische Eigenschaften von Polymerwerkstoffen (3)
- 8.5 Röntgenbildgebung (3)
- 9.0 Abteilungsleitung und andere (3)
- 5.6 Glas (2)
- 6.7 Materialsynthese und Design (2)
- 1.6 Anorganische Referenzmaterialien (1)
- 2 Prozess- und Anlagensicherheit (1)
- 2.1 Sicherheit von Energieträgern (1)
- 3 Gefahrgutumschließungen; Energiespeicher (1)
- 3.1 Sicherheit von Gefahrgutverpackungen und Batterien (1)
- 5.2 Metallische Hochtemperaturwerkstoffe (1)
- 6.0 Abteilungsleitung und andere (1)
- 8.4 Akustische und elektromagnetische Verfahren (1)
- 9.4 Integrität von Schweißverbindungen (1)
- 9.5 Tribologie und Verschleißschutz (1)
- S Qualitätsinfrastruktur (1)
- S.0 Abteilungsleitung und andere (1)
- VP Vizepräsident (1)
- VP.1 eScience (1)
- VP.2 Informationstechnik (1)
Paper des Monats
- ja (18)
Black microcolonial fungi (MCF) are persistent inhabitants of rock surfaces in hostile desert environments. In these niches, MCF have evolved mineral-weathering and symbiotic capabilities as well as mechanisms to cope with multiple stresses such as solar irradiation, temperature extremes and low water activity. Due to their stress tolerance these ascomycetes are prominent in modern terrestrial ecosystems – like man-made material surfaces from roof to solar panels. MCF interactive capabilities support their facultative symbiotic relationships with cyanobacteria and ensure their rock-weathering geochemical activity.
Using the rock-inhabiting fungus K. petricola A95 (Chaetothyriales), we developed transformation protocols and deleted genes responsible for production of the protective pigments melanins and carotenoids. To confirm that the mutant phenotypes were not due to hidden mutations, melanin synthesis was restored by complementing the mutants with the respective wild type genes. Strains of K. petricola carrying gene variants for fluorescent proteins EGFP and DsRed are available. We successfully labelled the cytoplasm, nuclei, peroxisomes and mitochondria. Targeted and ectopic integrations result in stable transformants suitable for further phenotypical characterization. As K. petricola is a non-pathogenic fungus with all characteristic features of MCF, including meristematic growth, melanized cell-walls, extracellular polymeric substances and extensive pigment production, our results will shed light on protective role of pigments during cell wall maturation and oxidative stress defence in rock-inhabiting MCF. Genes involved in environmental sensing or substrate and phototroph interactions are currently targeted. With the help of a mutant collection and fluorescently labelled K. petricola we will be able to investigate interactions of MCF with environmental stressors, mineral substrates, soil matrices and phototrophic symbionts.
Plants and microorganisms, besides the climate, drive nitrogen (N) cycling in ecosystems. Our objective was to investigate N losses and N acquisition strategies along a unique ecosystem-sequence (ecosequence) ranging from arid shrubland through Mediterranean woodland to temperate rainforest. These ecosystems differ in mean annual precipitation, mean annual temperate, and vegetation cover, but developed on similar granitoid soil parent material, were addressed using a combination of molecular biology and soil biogeochemical tools. Soil N and carbon (C) contents, δ15N signatures, activities of N acquiring extracellular enzymes as well as the abundance of soil bacteria and fungi, and diazotrophs in bulk topsoil and rhizosphere were determined. Relative fungal abundance in the rhizosphere was higher under woodland and forest than under shrubland. This indicates toward plants' higher C investment into fungi in the Mediterranean and temperate rainforest sites than in the arid site. Fungi are likely to decompose lignified forest litter for efficient recycling of litter-derived N and further nutrients. Rhizosphere—a hotspot for the N fixation—was enriched in diazotrophs (factor 8 to 16 in comparison to bulk topsoil) emphasizing the general importance of root/microbe association in N cycle. These results show that the temperate rainforest is an N acquiring ecosystem, whereas N in the arid shrubland is strongly recycled. Simultaneously, the strongest 15N enrichment with decreasing N content with depth was detected in the Mediterranean woodland, indicating that N mineralization and loss is highest (and likely the fastest) in the woodland across the continental transect. Higher relative aminopeptidase activities in the woodland than in the forest enabled a fast N mineralization. Relative aminopeptidase activities were highest in the arid shrubland. The highest absolute chitinase activities were observed in the forest. This likely demonstrates that (a) plants and microorganisms in the arid shrubland invest largely into mobilization and reutilization of organically bound N by exoenzymes, and (b) that the ecosystem N nutrition shifts from a peptide-based N in the arid shrubland to a peptide- and chitin-based N nutrition in the temperate rainforest, where the high N demand is complemented by intensive N fixation in the rhizosphere.
In 2018, the production of Municipal SolidWaste (MSW) in EU-28 reached 250.6 Mt, with the adoption of different management strategies, involving recycling (48 wt %), incineration and thermal valorization (29 wt %) and landfilling (23 wt %). This work was based on the analysis of the baseline situation of MSW management in EU-28 in 2018, considering its progress in 2008–2018, and discussed the possible improvement perspectives based on a framework involving incineration and recycling as the only possible alternatives, specifically evaluating the capability of already-existing incineration plants to fulfill the EU needs in the proposed framework. The results of the assessment showed two main crucial issues that could play a pivotal role in the achievement of Circular Economy action plan targets: the need to increase the recycling quotas for specific MSW fractions through the separate collection, and therefore the improvement of definite treatment process chains; the optimization of the recovery of secondary raw materials from incineration bottom ash, involving the Recycling of ferrous and nonferrous metals and the mineral fraction. Both issues need to find an extensive application across all member states to decrease the actual differences in the adoption of sustainable MSW management options.
The main obstacle to bottom ash (BA) being used as a recycling aggregate is the content of salts and potential toxic elements (PTEs), concentrated in a layer that coats BA particles. This work presents a dry treatment for the removal of salts and PTEs from BA particles. Two pilotscale abrasion units (with/without the removal of the fine particles) were fed with different BA samples. The performance of the abrasion tests was assessed through the analyses of particle size and moisture, and that of the column leaching tests at solid-to-liquid ratios between 0.3 and 4.
The results were: the particle-size distribution of the treated materials was homogeneous (25 wt % had dimensions <6.3 mm) and their moisture halved, as well as the electrical conductivity of the leachates. A significant decrease was observed in the leachates of the treated BA for sulphates (44%), chlorides (26%), and PTEs (53% Cr, 60% Cu and 8% Mo). The statistical analysis revealed good correlations between chloride and sulphate concentrations in the leachates with Ba, Cu, Mo, and Sr, illustrating the consistent behavior of the major and minor components of the layer surrounding BA particles. In conclusion, the tested process could be considered as promising for the improvement of BA valorization.
The main obstacle to bottom ash (BA) being used as a recycling aggregate is the content of salts and potential toxic elements (PTEs), concentrated in a layer that coats BA particles. This work presents a dry treatment for the removal of salts and PTEs from BA particles. Two pilotscale abrasion units (with/without the removal of the fine particles) were fed with different BA samples. The performance of the abrasion tests was assessed through the analyses of particle size and moisture, and that of the column leaching tests at solid-to-liquid ratios between 0.3 and 4. The results were: the particle-size distribution of the treated materials was homogeneous (25 wt % had dimensions <6.3 mm) and their moisture halved, as well as the electrical conductivity of the leachates. A significant decrease was observed in the leachates of the treated BA for sulphates (44%),
chlorides (26%), and PTEs (53% Cr, 60% Cu and 8% Mo). The statistical analysis revealed good correlations between chloride and sulphate concentrations in the leachates with Ba, Cu, Mo, and Sr, illustrating the consistent behavior of the major and minor components of the layer surrounding BA particles. In conclusion, the tested process could be considered as promising for the improvement of BA valorization.
Monodisperse iron oxide nanoparticles as reference material candidate for particle size measurements
(2020)
In order to utilize and rationally design materials at the nanoscale the reliable characterization of their physico-chemical properties is highly important, especially with respect to the assessment of their environmental or biological impact. Furthermore, the European Commission’s REACH Regulations require the registration of nanomaterials traded in quantities of at least 1 ton. Powders or dispersions where 50% (number distribution) of the constituent particles have sizes ≤ 100 nm in at least one dimension are defined as nanomaterials. This creates a need for industrial manufacturers and research or analytical service facilities to reliably characterize potential nanomaterials. Currently, BAM is developing reference nanoparticles, which shall expand the scarce list of worldwide available nano reference materials certified for particle size distribution and will also target other key parameters like shape, structure, porosity or functional properties. In this respect, materials like iron oxide or titanium dioxide are considered as candidates to complement the already available silica, Au, Ag, and polystyrene reference nanoparticles.
The thermal decomposition of iron oleate precursors in high boiling organic solvents can provide large quantities of iron oxide nanoparticles that can be varied in size and shape.[1, 2] The presence of oleic acid or other hydrophobic ligands as capping agents ensures stable dispersion in nonpolar solvents. Such monodisperse, spherical particles were synthesized at BAM and pre-characterized by electron microscopy (TEM, SEM including the transmission mode STEM-in-SEM) and dynamic light scattering comparing cumulants analysis and frequency power spectrum.
1. REACH regulations and nanosafety concerns create a strong need for nano reference materials with diverse properties.
2. Iron oxide nanoparticles are under development as new candidate reference material at BAM.
3. Narrow particle size distribution confirmed by light scattering and electron microscopy.
Recycled fertilizers produced using processes for the recovery of phosphate from residual materials such as wastewater, sewage sludge and sewage sludge ashes show very good bioavailability, but it is still a product largely unknown to the market. The aim of CLOOP is therefore to document the properties and effects of such fertilizers through chemical, mineralogical and ecological analyses as well as analytical method development and pot and field plant growth trials.
Outotec focused on 3 points in CLOOP: Experimental campaigns, process simulations as well as economic analyses with focus on the AshDec process, respectively the design of a large-scale AshDec plant for phosphorus recovery. The laboratory scale trials as well as the semi-industrial scale campaign provided valuable insights into the operating parameters of the process and the plant. As a result, for example, the temperature range could be significantly lowered, and the additive addition reduced by approx. 20 %. They have further shown that the AshDec process is not susceptible to operating fluctuations and that the product can be consistently produced at high quality. With the selection of suitable operating parameters, heavy metals (As, Pb, Cd, (Zn)) can be removed. Within the campaign, about 1.5 t of fertilizer for the plant trials in CLOOP could be produced. An AshDec plant process was digitally created in simulation software, allowing valuable process parameters to be simulated at various operating parameters. On this basis, a full-scale plant was designed. The data obtained in the project were used for a detailed economic analysis including a sensitivity analysis. It was possible to show under which conditions this plant can be operated economically.
At BAM, the AshDec fertilizer was synthesized with different additives and then applied to plant experiments at Uni Bonn. The goal hereby was to check differences in plant uptake. Because of the promising results of AshDec synthesized with sodium-carbonate and because this AshDec version does not require special off gas treatment for sulfur recovery (compared to AshDec synthesized with sodium-sulfate), all project partners agreed on continuing working with this AshDec variation. It was then used as a raw P-source for formulating it into NPK-fertilizers, by granulation with ammonium-sulfate and straw ash as potassium source. These recycling fertilizers were applied to plant- and field experiments by project partners in Brazil (University of Sao Paulo) and Australia (University of Queensland). Furthermore, in leaching experiments, the solubility of phosphorus in AshDec was compared to triple super phosphate. The experiments were carried out on soils with a varying phosphorus buffering index. Results show, that the phosphorus form in AshDec is way less soluble in water. This indicates that AshDec has the potential for a so-called next generation fertilizer – a fertilizer which’s nutrients remain in the soil and supply the plant according to its needs. At the moment, this behavior gets examined more in depth in lysimeter experiments in cooperation with University of Technology Berlin.
The focus of KWB is the Life Cycle Assessment (LCA) of different NextGen fertilizers to evaluate the entire process chain from recovery to fertilizer application. The NextGen fertilizer is credited by the amount of plant available nutrients in the product, which replace nutrients from conventional fertilizer. The LCA covers N-struvite precipitation from municipal wastewater, K-struvite precipitation from industrial wastewater and the AshDec-product from sewage sludge. The LCA task is almost complete. It could be shown that struvite precipitation has comprehensive environmental benefits, mainly since positive side effects occur in sewage sludge treatment (e.g. reduced sludge volume). In principle, the energetic and ecological profile of the AshDec process compared to direct use of sewage sludge ash cannot be assessed as being generally beneficial or negative. Regarding the global warming potential, the Ashdec process shows that the expenses (e.g. energy, chemicals) cannot be covered by the P fertilizer credit. In contrast, the impact categories “terrestrial acidification potential”, and “freshwater eutrophication potential” show positive results as the credits for conventional fertilizer are higher than the burdens for the process.
At University Bonn, the standardized pot experiments were conducted with several AshDec variations, using ryegrass, soybean, and spinach on a slightly acidic sandy soil and an organic-free standard substrate. P-uptake and biomass production of different AshDec variations were generally like those of triple super phosphate and struvite, and clearly outperformed untreated sewage sludge ash and rock phosphate. Field trials in Australia and Brazil with sugarcane on acidic soils are still ongoing and results are expected by the end of 2021.
Conventional fertilisers have their disadvantages as nutrient release is not synchronised with the demand of plants. Several approaches of "next generation fertilisers" are aiming at controlled nutrient release. Recycling fertilisers are often not soluble in water but fully plant available. They are suitable raw materials for the production of new types of controlled release fertilisers.
A new sewage sludge ordinance was set in force in Germany in 2017 that makes phosphorus recovery from sewage sludge mandatory. The technological possibilities for P-recovery from waste water, sewage sludge and sewage sludge ash were presented.
Wastewater contains a diverse array of organic and inorganic compounds and its complex composition strongly depends on the location and the connected dischargers. However, municipal wastewater as a carrier of feces and urine generally contains considerable amounts of the main nutrients nitrogen and phosphorus. The latter is in the focus of the discussions about the recovery potential of wastewater due to the relatively high mass flows of phosphorus in wastewater and the finite nature and decreasing quality of phosphate rock reserves. But due to the presence of the whole periodic table of elements, wastewater might contain further valuable components of interest for recovery including those defined as critical raw materials by the European Commission. Phosphorus and most of the other critical raw materials are fixed in the sewage sludge and after incineration in the sewage sludge ash (SSA). This is accompanied by high concentration factors from wastewater via sludge to ash. However, the mass fractions of the majority of elements in sewage sludge are comparable to those of the earth crust, indicating no relative enrichment. Nevertheless, enrichment factors of 100 or higher are given for phosphorus, copper, zinc, cadmium, silver, tin, lead and the platinum group elements indicating an anthropogenic input. An economic value of sewage sludge was estimated to $460,-/t calculated on the basis of the respective market prices for high purity elements – a theoretical value. A German survey of sewage sludge ashes showed that the mass fractions and the mass flows of most of the elements present in SSA are probably too low for an economic recovery. In most cases the mass flows are rather small compared to the imports and the chemical forms are not suitable for recovery. An exception is phosphorus that is present in high mass fractions up to 13% and that bears a high substitution potential. If the application of P-recovery technologies lead to a further concentration of valuable elements e.g. as by-products in side streams of the process, it would probably make also the recovery of other elements of economic interest.
Based on recently published research on leaching control mechanisms in electric arc furnace (EAF) slags, it is assumed that a FeO/SiO2 ratio of around one leads to low leached V and Cr concentrations. This ratio influences the mineral phase composition of the slag toward higher amounts of spinel and a lower solubility of calcium silicate phases by suppressing the formation of magnesiowuestite and highly soluble calcium silicate phases. To evaluate this hypothesis, laboratory and scaled up tests in an EAF pilot plant were performed on slag samples characterized by elevated V and Cr leaching and a high FeO/SiO2 ratio. Prior to the melting experiments, the optimum FeO/SiO2 ratio was calculated via FactSageTM. In the melting experiments, the ratio was adjusted by adding quartz sand, which also decreased the basicity (CaO/SiO2) of the slag. As a reference, remelting experiments without quartz sand addition were conducted and additionally, the influence of the cooling rate of the slag was examined. The remelted (without quartz sand) and the remelted modified slags (with quartz sand) were analyzed chemically and mineralogically and the leaching behavior was investigated. The modification of the slags yielded a minimized release of V and Cr, supporting the hypothesis that the FeO/SiO2 ratio influences the mineralogy and the leaching behavior.
Condensation particle counters (CPCs) are widely used for the measurement of aerosol particle number concentrations in the size range from approximately 3 nm to 3 μm. For an SI-traceable calibration of the size-dependent counting efficiency, which is advisable on a regular basis and required in several applications, Faraday cup aerosol electrometers (FCAEs) are considered to be a suitable SI-traceable reference.While the volumetric aerosol inlet flowrate and the electrical current measurement in FCAEs can be related to respective SI references, inter-comparison exercises for FCAEs are still performed on a regular basis to establish reliable uncertainty budgets and to further investigate the influences of designs and operational parameters on comparability. This is strongly demanded in the international community of metrological institutes and aerosol calibration facilities around the world, which provide CPC calibrations. In the present study, the performance of FCAEs was investigated,using Ag test aerosol particles with a 30 nm particle diameter by varying the inlet flowrates from 0.5 l min−1 to 4 l min−1. From our experimental results, significant deviations were observed in FCAE currents at sample flowrates smaller than 1.5 l min−1. It is recommended that these discrepancies should be quantified before an FCAE is used for CPC calibration at low sample flowrates and small particle sizes in the sub-30 nm size range.
Over the last few years, the Federal Institute for material research (BAM, Berlin) together with the Centre for the Study of Manuscript Cultures (CSMC, University of Hamburg) have initiated a systematic material investigation of black inks produced from Late Antiquity to the Middle Ages (ca. fourth century CE–fourteenth/fifteenth centuries CE), aimed primarily at extending and complementing findings from previous sporadic studies. Part of this systematic investigation has focused on Egyptian Coptic manuscripts, and the present preliminary study is one of its outputs. It centres on a corpus of 45 Coptic manuscripts—43 papyri and 2 ostraca—preserved at the Palau-Ribes and Roca-Puig collections in Barcelona. The manuscripts come from the Monastery of Apa Apollo at Bawit, one of the largest monastic settlements in Egypt between the Late Antiquity and the Early Islamic Period (sixth–eighth centuries CE). The composition of their black inks was investigated in situ using near-infrared reflectography (NIRR) and X-ray fluorescence (XRF). The analyses determined that the manuscripts were written using different types of ink: pure carbon ink; carbon ink containing iron; mixed inks containing carbon, polyphenols and metallic elements; and iron-gall ink. The variety of inks used for the documentary texts seems to reflect the articulate administrative system of the monastery of Bawit. This study reveals that, in contrast to the documents, written mostly with carbon-based inks, literary biblical texts were written with iron-gall ink. The frequent reuse of papyrus paper for certain categories of documents may suggest that carbon-based inks were used for ephemeral manuscripts, since they were easy to erase by abrasion.
Stress is a normal part of life for fungi, which can survive in environments considered inhospitable or hostile for other organisms. Due to the ability of fungi to respond to, survive in, and transform the environment, even under severe stresses, many researchers are exploring the mechanisms that enable fungi to adapt to stress. The International Symposium on Fungal Stress (ISFUS) brings together leading scientists from around the world who research fungal stress. This article discusses presentations given at the third ISFUS, held in Sao Jose dos Campos, Sao Paulo, Brazil in 2019, thereby summarizing the state-of-the-art knowledge on fungal stress, a field that includes microbiology, agriculture, ecology, biotechnology, medicine, and astrobiology.
The project ProMoAM is presented. The goal of the project is to evaluate which NDT techniques or combination of techniques is suited for in-situ quality assurance in additive manufacturing of metals. To this end, also 3d-data fusion and visualization techniques are applied. Additional ex-situ NDT-techniques are used as references for defect detection and quantification. Feasability studies for NDT-techniques that are presently not applicable for in-situ use are performed as well.
The presentation gives a brief overview of the whole project and the different involved NDT-techniques.
Microbiologically influenced corrosion (MIC) is a highly unpredictable process involving a complex group of microorganisms, including sulfate-reducing bacteria and methanogens. Standard laboratory MIC testing using static serum bottle enrichments is an easy but limited method, offering poor resolution on the biomineralization process of corrosion products. An example of this is the presumed corrosion product siderite by corrosive methanogens (Mi-MIC). Previous publications reported siderite was the sole corrosion product of M. maripaludis using metal coupons incubated under stationary conditions.
However, the formation of siderite is closely related to the surrounding environmental conditions, i.e. pH, CO2 concentration, flow and temperature. Thus, siderite as the sole corrosion product of Mi-MIC remain inconclusive and questionable. To study Mi-MIC effectively, a novel versatile multiport flow-column corrosion monitoring system (MFC) was developed. MFC allows sectional corrosion rate determination under flow conditions using different types of material, inoculum and packing material. MFC offers great flexibility, ease of operation and accurate corrosion measurements that can be combined with many other techniques. Using MFC, we studied multiple strains of methanogens and compared it with sulfate-reducing bacteria under neutral and low pH conditions. It was revealed by MFC that corrosive methanogens have equally high corrosion potential as sulfate-reducing bacteria. Additionally, siderite is not the dominant nor sole corrosion product of Mi-MIC. Thus, effective corrosion monitoring and establishing standard laboratory practices, i.e. incorporating MFC as part of regular testing process, will provide deeper understanding of MIC. This will allow further microbial electrophysiology understandings, contributing to effective mitigation strategy development.
Microbiologically influenced corrosion is a multidisciplinary research area. To develop successful mitigation strategies, expertise from the industry and research institutes are essential. In Department 4.1, we developed an innovative laboratory flow model (Hi-Tension) that allows effective monitoring of MIC under both standard and non-standard conditions. The flow model allows flexibility with material selection, flow rates, temperature and other environmental parameters changes. Furthermore, the flow model allows integration of electrochemical measurements using microsensors, providing a comprehensive view of corrosion at the biofilm level. Currently, initial results indicate corrosion in the flow model is significantly higher than that of standard laboratory set ups, i.e. static incubations, particularly for methane-producing microorganisms.
Microbial modelling of sulfate-reducing bacteria (SRB) and methanogenic archaea (ME) using iron
(2019)
Sulfate reducing bacteria (SRB) and methanogenic archaea (MA) are commonly found in the oil and gas environments. The formation of hydrogen sulfide (HS-) is particularly concerning for the petroleum industry due to its corrosiveness. However, the activities of SRB are limited to the concentration of sulfate present in the environment, whereas methanogens can utilize substrates such as H¬2 for methanogenesis. MA is commonly found in sulfate-free environments, such as deep sediments, and are known to form interspecies electron transfer relationships with SRB. Recently, SRB and MA capable of microbiologically influenced corrosion (MIC) by using elemental iron as a direct electron source (EMIC) have gained increased attention. On the iron surface, EMIC-SRB can outcompete EMIC-MA in the presence of sulfate, but this changes as sulfate depletes. The formation of FeS on the metal surface can be further utilized by MA for methanogenesis as it provides a conductive path. However, the possible kinetics involved of the overall process are currently unknown.
We obtained a co-culture of EMIC-SRB and EMIC-MA to investigate the growth rates and electrical potential changes under different environmental conditions, including changes in pH, temperature and salinity. Results indicate that under neutral conditions and using iron as the sole substrate, methane production (up to 5 mM) starts after sulfate was depleted. Electrochemical measurements will be conducted on the co-culture under different conditions to determine the changes in the electrical potential in correlation with the sulfate and methane concentration. Fluorescence and electron microscope images of the biofilm structure will be used to visualize cell distribution and morphology. This study embarks the first step of understanding the relationship between EMIC-SRB and EMIC-MA. Such knowledge is important for the field of microbial electrophysiology and can be further explored for industrial applications.
Biocide mitigation strategies of microbiologically influenced corrosion (MIC) in the oil and gas industry have been primarily used to eliminate the growths of sulfate-reducing microorganisms (SRM). However, methanogenic Archaea (MA) can also be highly corrosive by using iron as an electron source for methanogenesis. Because of the fundamental physiological differences between archaea and bacteria, responses of MA towards SRM-specific biocides cannot be deduced using SRM. Due to the lack of information available on the effect of biocides on corrosive MA, we selected THPS, glutaraldehyde, nitrate and perchlorate to compare against corrosive SRM.
Preliminary results showed that at low concentrations of THPS (0-10 ppm), growth of MA was not affected, methane production and corrosion rates (0.1 mm/yr) were comparable between the different THPS concentrations. On the contrary, the SRM strain showed decreased corrosion rates (0.18 mm/yr to 0.03 mm/yr) with increasing THPS concentrations. Further corrosion tests including electrochemical measurements of different biocides on the growth of MA and SRM will be conducted. Such knowledge not only provide important insights on the physiological response of MA to biocides but also contribute to more effective mitigation strategies that can be both economic and environmentally beneficial.
Microbiologically influenced corrosion (MIC) is the deterioration of metals due to the metabolic activities of microorganisms. Microorganisms can take electrons directly from the metal surface (EMIC) thereby causing corrosion. Well known culprits of EMIC are: sulfate-reducing bacteria (SRB), acetogens and methanogens.
Our aims
- Develop a novel flow system to study MIC by methanogens to mimic industrial Environments
- Investigate the inhibitory concentrations of biocides targeting SRB on corrosive methanogenic strains
- Investigate the inhibitory effects of corrosion inhibitors on methanogens
- Compare the inhibitory concentrations to SRB
Currently, corrosion rates (CR) and/or corrosion products (CP) obtained for methanogen-induced microbiologically influenced corrosion (Mi-MIC) on carbon steel are mainly analyzed from static-incubations. By using a multiport-flow-column, much higher CRs (0.72 mm/yr) were observed, indicating static-incubations are not suitable for determining the corrosive potential of Mi-MIC. With the combination of various analytical methods (ToF-SIMS/SEM-EDS/SEM-FIB) and contrary to previously published data, we observed that CPs contained phosphorus, oxygen, magnesium, calcium and iron but lacked carbon-related species (e.g. siderite). Overall, siderite nucleation is disrupted by methanogens, as they convert aqueous bicarbonate into carbon dioxide for methanogenesis resulting in increased localized corrosion.
Currently, sulfate-reducing bacteria (SRB) is regarded as the main culprit of microbiologically influenced corrosion (MIC), mainly due to the low reported corrosion rates of other microorganisms. For example, the highest reported corrosion rate for methanogens is 0.065 mm/yr. However, by investigating methanogen-induced microbiologically influenced corrosion (Mi-MIC) using an in-house developed versatile multiport flow test column, extremely high corrosion rates were observed. We analyzed a large set of carbon steel beads, which were sectionally embedded into the test columns as substrates for iron-utilizing methanogen Methanobacterium IM1. After 14 days of operation using glass beads as fillers for section separation, the highest average corrosion rate of Methanobacterium IM1 was 0.2 mm/yr, which doubled that of Desulfovibrio ferrophilus IS5 and Desulfovibrio alaskensis 16109 investigated at the same conditions. At the most corroded region, nearly 80% of the beads lost 1% of their initial weight (fast-corrosion), resulting in an average corrosion rate of 0.2 mm/yr for Methanobacterium IM1-treated columns. When sand was used as filler material to mimic sediment conditions, average corrosion rates for Methanobacterium IM1 increased to 0.3 mm/yr (maximum 0.52 mm/yr) with over 83% of the beads having corrosion rates above 0.3 mm/yr. Scanning electron images of metal coupons extracted from the column showed methanogenic cells were clustered close to the metal surface. Methanobacterium IM1 is a hydrogenotrophic methanogen with higher affinity to metal than H2. Unlike SRB, Methanobacterium IM1 is not restricted to the availability of sulfate concentration in the environment. Thus, the use of the multiport flow column provided a new insight on the corrosion potential of methanogens, particularly in dynamic conditions, that offers new opportunities for monitoring and development of mitigation strategies. Overall, this study shows under certain conditions methanogenic archaea can cause higher corrosion than SRB, specific quantifications, i.e., maximum, average, and minimum corrosion rates can be determined, and that spatial statistical evaluations of MIC can be carried out.
Microbiologically influenced corrosion (MIC) is an expensive but unpredictable problem for the industries. The most well-known culprit for MIC is the sulfate-reducing microorganisms (SRM), such as members from the genus Desulfovibrio. It has been widely accepted that SRM can contribute significantly to MIC through the production of hydrogen sulfide (HS-) or in some cases a direct electron uptake from the metal surface. However, in a real environmental system, SRM is not exclusive and often involved with other microorganisms that may also contribute to MIC, such as methanogens.
Methanogenic archaea can produce methane (CH4) using H2+CO2, formate, methylated amines or acetate. Methanogens are highly abundant in the environment and many are found in very extreme conditions, such as high temperature and high salinity. Previous researches have demonstrated that methanogens are capable of MIC, though the specific mechanisms are still under investigation. In the oil and gas industry, methanogens are not considered as the main contributor for MIC since the corrosion rates are often too low. However, the tests for methanogen-induced MIC are usually performed at static conditions, which cannot represent the system accurately. Here, we developed a novel anaerobic system to evaluate the corrosion potential of methanogens under flow conditions. We will use the Methanococcus maripaludis KA1 strain, which was isolated from a crude oil tank, as the organism of interest. A separate system for Desulfovibrio alaskensis will be established for corrosion rate comparisons. Furthermore, we will study the synergistic effects of M. maripaludis and D. alaskensis on MIC under flow.
The survey of Canadian shale sites showed a dominance of halophilic microorganisms, including Halomonas (HA). Nitrate-amended incubations of the field samples under high salinity (14.6% NaCl), revealed a dominance of HA (>72%) and an accumulation of nitrite. Nitrite accumulation directly inhibited the growth of SRB, thereby decreasing their souring and corrosion risks. However, accumulated nitrite may also contribute to iron corrosion, which will be tested by using different concentrations of nitrate as an electron acceptor to HA. Different salinities are further tested on HA strains supplemented with iron coupons to determine their effects on iron corrosion rates. HA incubated with separate cultures of corrosive methanogen and SRB were tested to determine whether a positive or adverse effect will occur between them. Lastly, analyses of iron coupons will be conducted using TOF-SIMS, FIB-SEM and EDS for corrosion product characterization
Flow-back and produced waters from shale gas and shale oil fields contain high ammonium, which can be formed by methanogenic degradation of methylamines into methane and ammonium. Methylamines are added to fracturing fluid to prevent clay swelling or can originate from metabolism of the osmolyte triglycinebetaine (GB).
We analyzed field samples from a shale gas reservoir in the Duvernay Formation and from a shale oil reservoir in the Bakken formation in Canada to determine the origin of high ammonium. Fresh waters used to make fracturing fluid, early flow-back waters, and late flow back waters from the shale gas reservoir had increasing salinity of 0.01, 0.58, and 2.66 Meq of NaCl, respectively. Microbial community analyses reflected this fresh water to saline transition with halophilic taxa including Halomonas, Halanaerobium, and Methanohalophilus being increasingly present. Early and late flow-back waters had high ammonium concentrations of 32 and 15 mM, respectively.
Such high concentrations had also been found in the Bakken produced waters.
Enrichment cultures of Bakken produced waters in medium containing mono, di-, or trimethylamine, or triglycinebetaine (GB) converted these substrates into ammonium (up to 20 mM) and methane. The methylotrophic methanogen Methanohalophilus, which uses methylamines for its energy metabolism and uses GB as an osmolyte, was a dominant community member in these enrichments. Halanaerobium was also a dominant community member that metabolizes GB into trimethylamine, which is then metabolized further by Methanohalophilus. However, the micromolar concentrations of GB measured in shale reservoirs make them an unlikely source for the 1,000-fold higher ammonium concentrations in flow-back waters. This ammonium either originates directly from the reservoir or is formed from methylamines, which originate from the reservoir, or are added during the hydraulic fracturing process. These methylamines are then converted into ammonium and methane by halophilic methylotrophic methanogens, such as Methanohalophilus, present in flow-back waters.
The bipartite interactions between insect hosts and their bacterial gut microbiota, or their bacterial pathogens, are empirically and theoretically well-explored. However, direct, and indirect tripartite interactions will also likely occur inside a host. These interactions will almost certainly affect the trajectory of pathogen virulence evolution, an area that is currently under researched. The interactions within tripartite associations can be competitive, that is, exploitative-competition, interference-competition or apparent-competition. Competitive interactions will be significantly influenced by non-competitive effects, for example, immunopathology, immunosuppression, and microbiota-mediated tolerance. Considering a combination of these interactions and effects, will enable an increased understanding of the evolution of pathogen virulence. This new perspective allows us to identify several novel research questions, which we hope will be a useful framework for future research.
Many studies have already shown that viruses can spread via aerosol particles. An aerosol is a mixture of air with solid or liquid particles dispersed in it. To understand the role of aerosol particles as a transmission path of SARS-CoV-2, knowledge of the different processes in an Aerosol is therefore of particular importance. With this paper, GAeF would like to contribute to a better understanding of the term “aerosol” and the relevant aerosol processes. In the context of this paper only the essential basics will be discussed. For a deeper understanding of the partly complex processes, please refer to the literature mentioned at the end of the paper.
The paper summarises a large number of studies on the formation of virus-laden aerosol particles and their spread. Based on this, it can be concluded that exhaled aerosol particles may play a prominent role in the spread of viruses in the corona pandemic. Finally, this paper discusses possible measures to reduce the spread of aerosol particles. The measures discussed are based on the current public debate including ventilation, air purifiers, HVAC systems and masks. Advice is given on the correct and sensible use of these measures.
An aerosol is always dynamic, as particles are newly formed, transported in or with the air, removed from the air or change in the airborne state. Aerosol particles have sizes between approx. 0.001 and several 100 micrometres (and not < 5 μm as currently defined in many publications) and spread relatively quickly with air currents, even over longer distances. Larger aerosol particles sink to the ground, depending on their size and density, while small aerosol particles can remain in the air for a very long time (see Section 3). Every person emits liquid aerosol particles of various sizes through breathing and when speaking, coughing and sneezing (see Section 4). If a person is infected with a virus, such as SARS-CoV-2, these aerosol particles can contain viruses that can be released into the air and inhaled by other people. SARS-CoV-2 has a size of 0.06 to 0.14 micrometres, but the exhaled liquid aerosol particles are larger. The liquid aerosol particles can shrink by evaporation, depending on the ambient conditions (see Section 3.3). Particle size is relevant for particle transport and particle separation. The highest risk of infection exists in closed indoor spaces, as aerosol particles can accumulate there.
Here in particular, appropriate measures must be taken to reduce the concentration of aerosol particles (see Section 5).
Against the background of aerosol science, the GAeF classifies the current measures to contain the pandemic as follows:
• In principle, no measure can work on its own! According to the current state of knowledge, the interaction of the most varied measures is the best way to minimise the risk of infection.
• Keeping distance is important, because with increasing distance, directly exhaled viruses are diluted and the probability of infection decreases. The often prescribed minimum distance can be used as a guide, but it should be increased and supplemented by other measures (see below), especially for longer meetings and also indoors with reduced air movement.
• Masks help to filter some of the exhaled particles (and viruses). This reduces the concentration of exhaled particles (and viruses) in a room and thus the risk of infection. It should be noted here that the exhaled aerosol particles are relatively large due to adhering moisture and can therefore also be efficiently retained by simple masks. However, since these particles shrink with longer dwell time in the room air, simple mouth-nose masks are less efficient for self-protection. Respiratory masks are required for this purpose, which show a high degree of separation even for fine particles, e.g. of classes FFP2, N95 or KN95. These are efficient for both self-protection and protection of others unless they have an exhalation valve. Masks with an exhalation valve, on the other hand, are only for self-protection and therefore contradict the solidarity concept that fellow human beings are protected by collective mask wearing. Face shields which are used without additional masks are largely useless with regard t• aerosol particles, as the air with particles (and viruses) flows unfiltered around the shields. In everyday clinical practice, facial shields are worn in addition to masks to prevent droplet infection via the mucous membranes of the eyes. Mobile or permanently installed Plexiglas barriers are also largely ineffective against the spread of aerosols indoors. These can only prevent the smallscale spread of an aerosol in the short term, e.g. in the checkout area of a supermarket, but offer no protection in the longer term. Face shields and Plexiglas panels essentially serve as spit and splash protection against large droplets.
• Outdoors, there are practically no infections caused by aerosol transmission. However, droplet infections can still occur, especially in crowds, if minimum distances are not observed and/or masks are not worn. In closed rooms, ventilation is essential to replace the exhaled air in a room with fresh air from outside. Frequent airing and cross-ventilation is just as effective as leaving the window open all the time. From an energy point of view, however, it is more efficient to ventilate the room, especially in winter. CO2 monitors can help to monitor indoor air quality. They indicate when it is necessary to ventilate and when the air in a room has been sufficiently changed during ventilation. However, they can only be used as an indicator and even if the proposed CO2 limit concentrations are met, they do not prevent direct infection by people in the immediate vicinity.
• Air purifiers can make a useful contribution to reducing the concentration of particles and viruses in a room. When procuring air purifiers, care must be taken to ensure that they are adequately dimensioned for the room and application in question in order to significantly reduce the particle and virus load. The air throughput of the unit is more important than the pure efficiency of the filter. For energy and cost reasons, the use of highly efficient filters can even be counterproductive. Permanently installed ventilation systems can also be useful, provided they filter the air to reduce the particle and virus load in a room. To avoid infections, it is advisable to operate them with 100 % fresh air if possible.
From the point of view of the Gesellschaft für Aerosolforschung, there is a considerable need for research, especially at the interdisciplinary borders to research fields of epidemiology, infectiology, virology, ventilation technology and fluid mechanics. The implementation of targeted studies should be made possible at short notice with special funding and research programmes.
This paper was written originally in German by members of the Gesellschaft für Aerosolforschung and is supported by a large number of international aerosol experts. Both the English and German version as well as all images in the paper are available for free download at the following link: https://www.info.gaef.de/positionspapier. The “Gesellschaft für Aerosolforschung e. V.” must be named as the source, whenever an image is used.
Treatment and reusing of hazardous wastes have become significant issues of modern societies. Blast furnace sludge (BFS) and electric arc furnace dust (EAFD) are such typical wastes, because they usually contain high amounts of undesirable elements such as zinc (Zn) and lead (Pb).
These elements can cause operational problems in reusing of BFS and EAFD. In this study, the Ferro Duo GmbH and the Federal Institute for Materials Research and Testing have investigated a novel approach for eliminating and/or recovering Zn and Pb from both wastes. Applied was a selective chlorination and volatilization of Zn and Pb as chlorides at temperatures between 500 °C and 1100 °C. Both product obtained, Zn and Pb in the form of ZnCl2 and PbCl2 and the purified solid mineral compound are attractive materials for further use. Hydrochloric acid and iron(II) chloride were used as chlorination agents. Exceptionally high Zn and Pb removal efficiencies of >99.5 % could be achieved with both chlorination agents, whereby iron(II) chloride exhibited better performance.
Harnessing near-chromosome level quality genomes to explore the evolution of termite immunity
(2023)
The phylogeny of the Blattodea boasts a wide degree of sociality spanning from solitary cockroaches to advanced ecosystem-dominating higher termite societies. The emergence of sociality in termites was associated with the acquisition of a diverse range of social structures. Previous work has found evidence for a caste-specific social defence system in termites leading to an immune system that may favour group over individual defence. While preliminary work suggests a correlation between social transitions and a reduction of immune gene family diversity, the lack of available high-quality termite genomes hampers complete knowledge of the true diversity of immune gene evolution across termite phylogeny. Here, we report on the sequencing and near-chromosome level assembly of 48 high-quality long-read-based genomes across major termite and cockroach sister-branch lineages. We investigate the diversity and evolutionary history of immune genes across genomes, focusing particular attention on correlations between immune gene evolution and transitions in sociality over termite phylogeny.
Insecta is one of the most diverse phyla in the animal kingdom, with species living in all types of habitats encountering an even greater diversity of pathogens and parasites. Defence strategies against such harmful threats led to a variety of molecular mechanisms, ecological shifts, and genetic innovations. Gene families underlying the molecular basis of the immune responses have evolved within the boundaries given by the species ecology. Here, we explore the evolution of some emblematic immune gene families throughout the Insecta phylum shedding light on remarkable genetic events such as gene duplication or gene loss. We followed a workflow based on the Hidden Markov model to search for immune genes in 55 high-quality genomes of insects. We highlight the emergence of group defence in social species as an ecological shift that released selection pressure on immune gene families notably in Blattodea. Further, we draw attention to certain gene families and the link between their diversity and the specificities of the species’ microbiota. Overall, we report data on immune gene diversity in insects.
The phylogeny of the Blattodea boasts a wide degree of sociality spanning from solitary cockroaches to advanced ecosystem-dominating higher termite societies. The emergence of sociality in the termites was associated with the acquisition of a diverse range of social structures and differential expression of specific gene network. Previous work has found evidence for a caste-specific social defence system in termites leading to an immune system that may favour group over individual defence. While preliminary work suggests a correlation between social transitions and a reduction of immune gene family diversity, the lack of available high-quality termite genomes hampers complete knowledge of the true diversity of immune gene evolution across termite phylogeny. Here, we report on the sequencing and assembly of 50 high-quality long-read-based genomes and 180 caste- and sex-specific brain transcriptomes across major termite and cockroach sister-branch lineage. We investigate the diversity and evolutionary history of immune genes across genomes, and the potential gene networks that have evolved with the emergence of termite sociality and some aspect of immune related behaviours.
The soil-feeding habit is an evolutionary novelty found in some advanced groups of termites. The study of such groups is important to revealing interesting adaptations to this way-of-life. The genus Verrucositermes is one such example, characterized by peculiar outgrowths on the head capsule, antennae and maxillary palps, which are not found in any other termite. These structures have been hypothesized to be linked to the presence of a new exocrine organ, the rostral gland, whose structure has remained unexplored.
We have thus studied the ultrastructure of the epidermal layer of the head capsule of Verrucositermes tuberosus soldiers.We describe the ultrastructure of the rostral gland, which consists of class 3 secretory cells only. The dominant secretory organelles comprise rough endoplasmic reticulum and Golgi apparatus, which provide secretions delivered to the surface of the head, likely made of peptide-derived components of unclear function. We discuss a possible role of the rostral gland of soldiers as an adaptation to the frequent encounter with soil pathogens during search for new food resources.
The potential release of hazardous substances from polymer-based products is currently in the focus of environmental policy. Environmental simulations are applied to expose such products to selected aging conditions and to investigate release processes. Commonly applied aging exposure types such as solar and UV radiation in combination with water contact, corrosive gases, and soil contact as well as expected general effects on polymers and additional ingredients of polymer-based products are described. The release of substances is based on mass-transfer processes to the material surfaces. Experimental approaches to investigate transport processes that are caused by water contact are presented. For tailoring the tests, relevant aging exposure types and release quantification methods must be combined appropriately. Several studies on the release of hazardous substances such as metals, polyaromatic hydrocarbons, flame retardants, antioxidants, and carbon nanotubes from polymers are summarized exemplarily. Differences between natural and artificial exposure tests are discussed and demonstrated for the release of flame retardants from several polymers and for biocides from paints. Requirements and limitations to apply results from short-term artificial environmental exposure tests to predict long-term environmental behavior of polymers are presented.
Leachiing tests - a useful tool for the environmental impact assessment of construction products?
(2018)
Construction products and waste materials used for construction can be in contact with the environment and may release potential harmful compounds. Information on the total content of these substances in the product is not sufficient to assess its envrionmental impact since it does not consider realistic exposure conditions.The impact of these compounds is often assessed by using the total content in the product. This estimation lacks realistic exposure conditions.
Concerning the pathway to soil and groundwater by contact with rain or seepage water leaching tests, which were developed and standardized by the European Committee for Standardization, are available. While for secondary construction products and waste this investigation of the leaching behaviour is standard procedure and is already part of regulation in Germany (draft ordinance on reuse of mineral waste) and within Europe (landfill directive) the release from primary construction products got in the focus more recently. Several monitoring studies found unexpected high concentrations of substances used as herbicides and fungicides in surface water and stormwater originating from urban areas. As some of these compounds are even banned for the use in agricultural applications in Europe alternative sources as roof materials and façade coatings exposed to rain were suggested. Further field and laboratory tests confirmed construction products as sources of these substances in water.
The aim of this presentation is to show exemplary results of existing leaching methods and underline the strength and weaknesses of the test system with selected examples from our work. We especially draw the attention to the research which is still needed to close the gap between the results of leaching experiments and the subsequent risk assessment of the products.
The presentation gives an overview about the use of ecotoxicity testing in assessment of waste. Especially in cases with unknown composition this kind of test are useful. Recently, the assessment of the hazard property HP 14 "ecotoxicity" for the labelling of waste was published. The labelling procedure is explained in detail.
The presentation gives an overview about the use of ecotoxicity testing in assessment of waste. Especially in cases with unknown composition this kind of test are useful. Recently, the assessment of the hazard property HP 14 "ecotoxicity" for the labelling of waste was published. The labelling procedure is explained in detail.
The presentation gives an overview about the use of ecotoxicity testing in assessment of waste. Especially in cases with unknown composition this kind of test are useful. Recently, the assessment of the hazard property HP 14 "ecotoxicity" for the labelling of waste was published. The labelling procedure is explained in detail.
Column leaching tests are frequently used and accepted for investigation of release of hazardous substances from solid materials. Independent of differences due to the field of application or national regulations, column tests assume that local equilibrium is established in the experiment which facilitates transfer of results to field conditions. In the process of harmonization and standardization within Europe the question on the influence of flow rate and grain size distribution on the local equilibrium was raised. Thus, a set of experiments using two different masonry materials with varying grain size distribution and flow rate were conducted including stop/flow experiments. Results are compared to a numerical model which takes intraparticle pore diffusion-controlled release of Mo and V into the percolating water into account. Due to the relatively high intraparticle porosity of the materials (24–29%) data and model indicate that initially equilibrium-state conditions prevail followed by rapidly decreasing concentrations. The model fits data for Mo and V reasonably well; however, after the initial decline of concentrations (at L/S > 2) extended tailing is observed especially of elements occurring as oxides, which is not captured by the model.
Construction products are in contact with water (e.g., rain, seepage water) during their service lifetime and may release potentially harmful compounds by leaching processes. Monitoring studies showed that compounds attributed to construction products are found in storm water and the receiving bodies of water and that the release of biocides in urban areas can be comparable to the input of pesticides from agricultural uses. Therefore, a prospective risk assessment of such products is necessary. Laboratory leaching tests have been developed by the Technical Committee CEN/TC 351 and are ready to use. One major task in the future will be the evaluation of the leaching test results, as concentrations found in laboratory experiments are not directly comparable to the field situations. Another Task will be the selection of compounds to be considered for construction products, which are often a complex mixture and contain additives, pigments, stabilization agents, etc. The formulations of the products may serve as a starting point, but total content is a poor predictor for leachability, and analysis of the eluates is necessary. In some cases, nontargeted approaches might be required to identify compounds in the eluates. In the identification process, plausibility checks referring to available information should be included. Ecotoxicological tests are a complementary method to test eluates, and the combined effects of all compounds—including Degradation products—are included. A bio test battery has been applied in a round robin test and was published in a guidance document. Published studies on the ecotoxicity of construction products show the tests’ suitability to distinguish between products with small and larger effects on the environment.
Our earlier study based on historical and scientific analysis showed that Iranians used a considerable range of materials in the sizing process. Unlike many nations who used limited sizing materials to improve the mechanical strength and to smoothen the paper surface, Iranians have used various materials for sizing process from Taimurid (15th century) to Safawid (16th century) and Qajar (19th century) periods. Further to our earlier study on the Sizing Materials used in Persian manuscripts and miniature paintings, scientific analysis was carried out to investigate their behaviour against the mould fungus Aspergillus flavus. In the first stage fourteen different sizing materials that was identified from Persian historical recipes were reconstructed. In the second stage fungicidal property of each sizing samples against Aspergillus flavus fungus were identified that will be presented in this paper.
In this study, we investigated the diverse range of materials used for sizing in Iranian paper manuscripts during the Timurid (fifteenth century) to Safavid (sixteenth century) and Qajar (nineteenth century) periods. Our approach combined historical analysis with scientific examination of reconstructed sizings. We reconstructed 15 sizing materials based on identified Persian historical recipes and analysed their physical, optical, and spectral characteristics. Additionally, we assessed their behaviour against the mould fungus Aspergillus flavus. The results revealed distinctive properties for each sizing material, shedding light on their potential applications in paper preservation. Furthermore, our investigation demonstrated variations in hygroscopicity, thickness, grammage, and ash content post-sizing. The sizing materials also exhibited different effects on paper reflectance properties. Additionally, our study revealed insights into the impact of sizing on burnished papers, indicating that the mechanical process of burnishing did not significantly alter the chemical composition or spectral properties of the paper, with only minor changes in brightness observed in specific cases. All tested sizing materials supported varying levels of mould growth, indicating potential implications for paper conservation. Our findings provide valuable insights into the historical practices of Iranian paper sizing and offer practical considerations for the preservation of paper manuscripts.
Fluorometric sensing is a versatile approach for trace analysis outside of the laboratory, requiring suitable sensor materials and their integration into sensing devices. The versatility of fluorophores as probes, especially in terms of the possibility to tailor their optical as well as their recognition properties by synthetic modifications in a wide range, renders them as superior active component for the preparation of optical sensing devices. Recent works at BAM in this field include, for example, the detection of nerve gas agents, illustrating impressively the aforementioned benefits of fluorophores in optical sensing applications.
In the interdisciplinary project presented here, we target hazardous gases such as ammonia, benzene, and hydrogen sulfide, next to others, which pose a major threat to human health and environmental safety and for which the availability of a sensitive and reliable detection method is highly desirable. The dyes presented follow a “turn-on” fluorescence schematic, which allows for the selective and sensitive detection of the respective gaseous analyte. The immobilization of the probe in polymeric matrices is then the next step toward the fabrication of a prototype device for molecular sensing. Further steps in the project include the assembly of instruments for test-atmosphere generation, the referencing of the sensor system, development and implementation of an optical setup, and the testing of the prototype device under laboratory conditions and in the field.
In this presentation, we give an overview over the recent developments on this topic in our groups. Highlights are hydrogen sulfide sensitive, BODIPY based transition metal complexes, which allow for a sensitive as well as selective detection of the toxic gas. In addition, we present a novel class of highly substituted BODIPY derivatives – pocket-BODIPYs – which are of a synthetically high versatility and can readily be modified to create pockets in the periphery of the molecule of defined geometries. This is illustrated on the successful encapsulation of benzene by a pocket-BODIPY derivative, confirmed by X-ray crystallographic analysis as well as by further spectroscopic and analytical methods.
In this work, we use a gas sensor system consisting of a commercially available gas sensor in temperature cycled operation. It is trained with an extensive gas profile for detection and quantification of hazardous volatile organic compounds (VOC) in the ppb range independent of a varying background of other, less harmful VOCs and inorganic interfering gases like humidity or hydrogen. This training was then validated using a different gas mixture generation apparatus at an independent lab providing analytical methods as reference. While the varying background impedes selective detection of benzene and naphthalene at the low concentrations supplied, both formaldehyde and total VOC can well be quantified, after calibration transfer, by models trained with data from one system and evaluated with data from the other system. The lowest achievable root mean squared errors of prediction were 49 ppb for formaldehyde (in a concentration range of 20–200 ppb) and 150 μg/m³ (in a concentration range of 25–450 μg/m³) for total VOC. The latter uncertainty improves to 13 μg/m³ with a more confined model range of 220–320 μg/m³. The data from the second lab indicate an interfering gas which cannot be detected analytically but strongly influences the sensor signal. This demonstrates the need to take into account all sensor relevant gases, like, e.g., hydrogen and carbon monoxide, in analytical reference measurements.
Thermo-Desorption Gas Chromatography-Mass Spectrometry (TD-GC-MS) was used to investigate the thermal degradation of two different polyurethanes (PU). PU samples were heated at different heating rates and the desorbed products were collected in a cold injection system and thereafter submitted to GC-MS. Prospects and limitations of the detection and quantification of semi-volatile degradation products were investigated. A temperature dependent PU depolymerization was
found at temperatures above 200 °C proved by an increasing release of 1,4-butanediol and methylene diphenyl diisocyanate (MDI) representing the main building blocks of both polymers. Their release was monitored quantitatively based on external calibration with authentic compounds. Size Exclusion Chromatography (SEC) of the residues obtained after thermodesorption confirmed the initial competitive degradation mechanism indicating an equilibrium of crosslinking and depolymerization as previously suggested. Matrix-Assisted Laser Desorption Ionization (MALDI) mass spectrometry of SEC fractions of thermally degraded PUs provided additional hints on degradation mechanism.