4 Material und Umwelt
Filtern
Dokumenttyp
- Vortrag (440)
- Zeitschriftenartikel (335)
- Posterpräsentation (144)
- Beitrag zu einem Tagungsband (79)
- Buchkapitel (38)
- Forschungsbericht (19)
- Zeitschriftenheft (Herausgeberschaft für das komplette Heft) (18)
- Amtliche Bekanntmachung (12)
- Sonstiges (9)
- Beitrag zu einem Sammelband (7)
Sprache
- Englisch (805)
- Deutsch (304)
- Spanisch (4)
- Französisch (2)
- Chinesisch (2)
- Italienisch (1)
- Polnisch (1)
Schlagworte
- Biocides (49)
- Antimicrobial resistance (34)
- Deponie (32)
- Leaching (30)
- Nano (29)
- Recycling (27)
- Ink (26)
- Corrosion (25)
- Bacteria (24)
- Biofilms (24)
- MIC (24)
- Phosphor (21)
- VOC (21)
- OECD (20)
- Rostasche (20)
- XRF (20)
- Archaeometry (19)
- Biofilm (19)
- Klärschlamm (19)
- Evolution (18)
- PFAS (18)
- Sewage sludge (17)
- Kunststoffdichtungsbahn (16)
- Per- and Polyfluoroalkyl substances (PFAS) (16)
- Phosphorus (16)
- Zulassungen (16)
- Anerkennungen (15)
- Bauprodukte (15)
- Richtlinien (15)
- Bottom ash (14)
- Methanogens (14)
- Nanomaterial (14)
- Phosphorrückgewinnung (14)
- Phosphorus recovery (14)
- Raman spectroscopy (14)
- Emission (13)
- Manuscripts (13)
- Microbiologically influenced corrosion (13)
- Festlegungen (12)
- Fungus (12)
- Geokunststoffe (12)
- Inks (12)
- Zulassung (12)
- Construction products (11)
- Disinfection (11)
- E. coli (11)
- NAP-XPS (11)
- Reverse glass painting (11)
- XANES spectroscopy (11)
- Antimicrobial coating (10)
- Biocide (10)
- Black fungi (10)
- DRIFTS (10)
- Soil (10)
- Aerosol (9)
- Archaea (9)
- Cascade impactor (9)
- Fertilizer (9)
- Genetics (9)
- Klärschlammverordnung (9)
- Knufia petricola (9)
- Manuscript (9)
- Microbiology (9)
- Persistence (9)
- Prüfrichtlinie (9)
- Resistance (9)
- Standardization (9)
- Termite (9)
- Wastewater (9)
- Zerstörungsfreie Prüfung (9)
- Archäometrie (8)
- Circular economy (8)
- Coptic (8)
- Ectoine (8)
- Fungi (8)
- Geosynthetics (8)
- Humboldt Codices (8)
- Indoor air quality (8)
- Non-destructive testing (8)
- Non-invasive analysis (8)
- Papyrus (8)
- Risk assessment (8)
- TXRF (8)
- Volatile organic compounds (8)
- Weathering (8)
- X-ray absorption near-edge structure (XANES) spectroscopy (8)
- BEMMA (7)
- Ersatzbaustoffe (7)
- Gichtgasschlamm (7)
- Holzschutz (7)
- Horizontal gene transfer HGT (7)
- ISO 16000-6 (7)
- Laser-induced periodic surface structures (LIPSS) (7)
- Melanin (7)
- Nanopartikel (7)
- PAK (7)
- Papier (7)
- Reference material (7)
- Resistance evolution (7)
- Scandium (7)
- Termites (7)
- Tolerance (7)
- Umweltsimulation (7)
- Anobium punctatum (6)
- Antibiotics (6)
- BBodSchV (6)
- BOFS (6)
- Bacterial adhesion (6)
- Biocide tolerance (6)
- CFK (6)
- Combustion Ion Chromatography (6)
- Combustion ion chromatography (6)
- Cultural heritage (6)
- Dead Sea Scrolls (6)
- Düngemittel (6)
- EN 16516 (6)
- Ecotoxicity (6)
- Environmental evaluation (6)
- Fertilzer (6)
- Geogitter (6)
- Geruch (6)
- Glutaraldehyde (6)
- Horizontal gene transfer (6)
- Hydraulic reactivity (6)
- Iron-gall ink (6)
- Korrosion (6)
- Kunststoffdichtungsbahnen (6)
- Lysimeter (6)
- Mikroplastik (6)
- Museum (6)
- Pathogen (6)
- Pyrometallurgy (6)
- Remediation (6)
- Ringversuch (6)
- Thermal desorption (6)
- Transformation (6)
- Wood protection (6)
- XANES (6)
- XPS (6)
- Alginate (5)
- Analytik (5)
- Antimony (5)
- Bio-weathering (5)
- Biofilm formation (5)
- Biozide (5)
- Cross-resistance (5)
- DHN melanin (5)
- Degradation (5)
- Elektroofenstaub (5)
- Emission test chamber (5)
- Emissionen (5)
- Environmental Simulation (5)
- Gas chromatography (5)
- Ground water (5)
- Gypsum (5)
- Heterogeneity (5)
- Immunity (5)
- Ink analyses (5)
- Ink analysis (5)
- Klärschlammasche (5)
- Kreislaufwirtschaft (5)
- Lichtbogenofen (5)
- Methanogen (5)
- Mutation rate (5)
- Nanomaterials (5)
- Nanoparticle (5)
- Olivine (5)
- Parchment (5)
- Passive sampling (5)
- Pigment (5)
- Pigments (5)
- Portland Cement (5)
- Pyrometallurgie (5)
- Reflectography (5)
- Ressourcenrückgewinnung (5)
- Sc-ICP-ToF-MS (5)
- Sekundärrohstoffe (5)
- Sewage sludge ash (5)
- Single cell analysis (5)
- Spectroscopy (5)
- Standardisation (5)
- Tantal (5)
- Test guideline (5)
- Ultrafine particles (5)
- VVOCs (5)
- Verwertung (5)
- Zeichenmaterialien (5)
- Zement (5)
- ZfP (5)
- Zinc (5)
- Zink (5)
- ATR (4)
- Air quality monitoring (4)
- Alite (4)
- Analytical method (4)
- Antimicrobial surfaces (4)
- Antimicrobials (4)
- Architecture (4)
- Ausnahmegenehmigungen (4)
- Biocorrosion (4)
- Bodenmaterial (4)
- Bundesoberbehörden (4)
- Carbon Fibers (4)
- Carbon steel (4)
- Chemical durability (4)
- Corrosion products (4)
- Diffusive Gradients in thin films (DGT) (4)
- Diffusive gradients in thin films (DGT) (4)
- Dünger (4)
- ESEM (4)
- Electric arc furnace dust (4)
- Emission reference materials (4)
- Formaldehyd (4)
- Gefahrgutregeln (4)
- Geotextiles (4)
- Guideline (4)
- Hi-Tension (4)
- ICP-MS (4)
- Kulturgut (4)
- LD-Schlacke (4)
- Light (4)
- Makronährstoffe (4)
- Mantelverordnung (4)
- Method development (4)
- Microcolonial fungi (4)
- Middle Ages (4)
- Mixed ink (4)
- NanoSIMS (4)
- Nanoparticles (4)
- Nassaufbereitung (4)
- Nitrogen (4)
- Nährstoffe (4)
- Particles (4)
- Phosphat (4)
- Polyethylene (4)
- Polyglycerol (4)
- Raman Spectroscopy (4)
- Recovery (4)
- Red Mud (4)
- Reference materials (4)
- Round robin test (4)
- Sorption (4)
- Spannungsrissbeständigkeit (4)
- Stahlwerksschlacke (4)
- Steelmaking slag (4)
- Struvite (4)
- Tantalum (4)
- Thermal treatment (4)
- Tineola bisselliella (4)
- UFP (4)
- VOC-emission (4)
- Virus (4)
- Ökotoxizität (4)
- 3D printing (3)
- Abfallverbrennung (3)
- Affinity chromatography (3)
- Aluminium (3)
- Anoxia (3)
- Antibodies (3)
- Antimicrobial (3)
- Antimikrobielle Resistenz (3)
- Antmikrobielle Oberflächen (3)
- Baustoffrecycling (3)
- Bauxite Residue (3)
- Beschleunigte Alterung (3)
- Biodeterioration (3)
- Bioinformatics (3)
- Black fungus (3)
- Blast furnace sludge (3)
- CDW processing (3)
- CIC (3)
- Cabonfasern (3)
- Cairo Genizah (3)
- Carbon ink (3)
- Carbon steel corrosion (3)
- Carbonfaser (3)
- Chamber test (3)
- Chemical analysis (3)
- Combustion ion chromatography (CIC) (3)
- DGT (3)
- DIN (3)
- DNA (3)
- Design of experiments (3)
- Dichtungskontrollsysteme (3)
- Diffusive gradients in thin-films (DGT) (3)
- Drawings (3)
- EOF (3)
- Electric Arc Furnace (3)
- Electron microscopy (3)
- Element mass concentration (3)
- Elutionsverfahren (3)
- Emerging (3)
- Emission reference material (3)
- Emissions (3)
- Environmental simulation (3)
- Ersatzbaustoff (3)
- Extracellular polymeric substances (3)
- Extractable organically bound fluorine (EOF) (3)
- Extremotolerance (3)
- FFF-3D-Printer (3)
- FIB/SEM (3)
- Flow Model (3)
- Fluorescence (3)
- Genomics (3)
- Geotextilien (3)
- Geruchsmessung (3)
- Glass (3)
- Groundwater (3)
- Gut microbiota (3)
- Gypsum recycling (3)
- HP14 (3)
- Halomonas elongata (3)
- Herculaneum (3)
- High resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) (3)
- Immune gene family (3)
- In-situ analysis (3)
- Incineration bottom ash (3)
- Interlaboratory comparison (3)
- Ir DNA staining approach (3)
- Korynetes caeruleus (3)
- LIPSS (3)
- Landwirtschaft (3)
- Laser processing (3)
- Laser-induced breakdown spectroscopy (3)
- Low melting (3)
- Luftschadstoffe (3)
- Manuscript studies (3)
- Material science (3)
- Materials emissions test (3)
- Mechanochemical treatment (3)
- Metabolism (3)
- Methanogen-induced microbiologically influenced corrosion (3)
- Microbiological influenced corrosion MIC (3)
- Mikrobiell beeinflusste Korrosion (3)
- Modelling (3)
- Modelling studies (3)
- Non destructive analytical techniques (3)
- Non-destructiv testing (3)
- Normung (3)
- Odour (3)
- Osmoadaptation (3)
- PFC (3)
- Particle size distribution (3)
- Partikel (3)
- Perceived Intensity (3)
- Persian manuscripts (3)
- Phenotypic diversity (3)
- Phosphorus fertilizer (3)
- Polymere (3)
- Quality assurance (3)
- Raman (3)
- Recycling fertilizer (3)
- Recycling materials (3)
- Rembrandt (3)
- Renewable Energy, Sustainability and the Environment (3)
- Robustness studies (3)
- Rock-inhabiting fungus (3)
- Rotschlamm (3)
- SC-ICP-ToF-MS (3)
- Schadstofftransfer (3)
- Secondary building materials (3)
- Selective chlorination (3)
- Single cell (3)
- Size (3)
- Social (3)
- Standardisierung (3)
- Steelmaking (3)
- Stress tolerance (3)
- Sulfate reducing bacteria (3)
- Symbiosis (3)
- Synchrotron (3)
- TED-GC/MS (3)
- Thermochemisch (3)
- UV radiation (3)
- VVOC (3)
- Virulence (3)
- Waste management (3)
- Waste treatment (3)
- Wood Protection (3)
- X-ray diffraction (3)
- XRF analysis (3)
- 3D inspection (2)
- Abdichtungssystem (2)
- AbfKlärV (2)
- Abfallbehandlung (2)
- Abwasser (2)
- Abwasserbehandlung (2)
- Additive Fertigung (2)
- Additive Manufacturing (2)
- Additive Manufacturing (AM) (2)
- Adipokinetic hormone (2)
- Adipokinetic hormone receptor (2)
- Adsorbable organically bound fluorine (AOF) (2)
- Aerosol measurements (2)
- Aerosole (2)
- Agronomic performance (2)
- Agronomische Effizienz (2)
- Air exchange rate (2)
- Air pollution (2)
- Air sampling (2)
- Alkalien (2)
- Ambient aerosols (2)
- Ammonium (2)
- Analytical methods (2)
- Anpassung (2)
- Antagonism (2)
- Antibiotic resisitance (2)
- Antimon (2)
- Antiquity (2)
- Apanteles carpatus (2)
- Arabic Recipes (2)
- Artificial ageing (2)
- AshDec (2)
- Ashdec (2)
- Atomic and Molecular Physics and Optics (2)
- Bacterial adhesion tests (2)
- Bacterial attachment (2)
- Bagasse (2)
- Baryscapus tineivorus (2)
- Bassanite (2)
- Bee (2)
- Behördenklausurtagung (2)
- Bewehrungen aus Kunststoff (2)
- Bewitterung (2)
- Biodiversity (2)
- Biofilm growth (2)
- Biofouling (2)
- Biogenic weathering (2)
- Biological pest control (2)
- Biologische Schädlingsbekämpfung (2)
- Bioreceptivity (2)
- Biosynthesis (2)
- Biotechnology (2)
- Biozid (2)
- Blattodea (2)
- Blauer Engel (2)
- Boden (2)
- Botrytis cinerea (2)
- Brown-rot fungi (2)
- Building and Construction (2)
- Böden (2)
- CEN (2)
- CO2 assisted impregnation (2)
- CSMC (2)
- Calcium alkali phosphate (2)
- Calcium silicate (2)
- Calcium sulfate (2)
- Cannibalism (2)
- Capsules (2)
- Carbide formation (2)
- Carbon feeding (2)
- Chemical characterization (2)
- Chinese paper (2)
- Chromium (2)
- Circular Economy (2)
- Clinker substitute (2)
- Coastal protection (2)
- Cockroach (2)
- Colourants (2)
- Compatible solute (2)
- Comsumer good samples (2)
- Concrete (2)
- Condensed Matter Physics (2)
- Conservation (2)
- Construction Products (2)
- Consumer products (2)
- Contamination (2)
- Corona (2)
- Corrosion evolution (2)
- Corynetes caeruleus (2)
- Crystallization (2)
- DIN EN 16516 (2)
- DSLT (2)
- Density separation (2)
- Deponien (2)
- Deponietechnik (2)
- Desinfectant (2)
- Dichtungskontrollsystem (2)
- Diffusive sampling (2)
- Disease (2)
- Disinfectants (2)
- Disposal repository (2)
- Dry treatment (2)
- Dyes (2)
- E.coli (2)
- Elektronisches Laborbuch (2)
- Elutionsverhalten (2)
- Emission chamber (2)
- Emission testing (2)
- Emissionskammer (2)
- Energy Engineering and Power Technology (2)
- Entomopathogen (2)
- Environment (2)
- Environmental condition (2)
- Ersatzbaustoffverordnung (2)
- European standard (2)
- Eusociality (2)
- FEM model (2)
- FTIR (2)
- Farbmittel (2)
- Filterstaub (2)
- Flow system (2)
- Fluoride (2)
- Formaldehyde (2)
- Forsterite (2)
- Fuel Technology (2)
- Fume (2)
- Fungal biofilms (2)
- GAeF (2)
- Genome sequence (2)
- Glasmalfarben (2)
- Glass scanning (2)
- Group defence (2)
- Größenbestimmung (2)
- Gypsum fiberboards and synthetic gypsum (2)
- HAXPES (2)
- HDPE geomembrane (2)
- HI-Tension (2)
- Halomonas CRISPR Ectoine (2)
- Halophile (2)
- Heavy metal removal (2)
- Hydrogen (2)
- IAQ (2)
- IPM (2)
- ISO (2)
- In situ (2)
- Infrared spectroscopy (2)
- Ink composition (2)
- Inkwells (2)
- Innenraum (2)
- Insect biotechnology (2)
- Interdisciplinary (2)
- Interdisciplinary approach (2)
- Iron (2)
- Iron oxide nanoparticles (2)
- Isoptera (2)
- Keratin (2)
- Knufia (2)
- Kulturelle Entomologie (2)
- Kunststoffrasen (2)
- Kunststoffschweißen (2)
- LA-ICP-MS (2)
- LC-MS/MS (2)
- Landfill liner (2)
- Langzeitverhalten (2)
- Lapis lazuli (2)
- Laser Powder Bed Fusion (L-PBF) (2)
- Leaching control mechanisms (2)
- Leaching of waste materials (2)
- Leaching tests (2)
- Leak detection (2)
- Leather (2)
- Leonardo da Vinci (2)
- Life history data (2)
- Loading factor (2)
- Luft (2)
- MOF (2)
- MSWI bottom ash (2)
- Magnesium (2)
- Manuskripte (2)
- Marble (2)
- Marine littering (2)
- Material emissions (2)
- Mechanochemistry (2)
- Melting experiments (2)
- Metabolomics (2)
- Micro plastic (2)
- Micro-XRF (2)
- Microbial (2)
- Microbiologically influenced corrosion (MIC) (2)
- Microbiome (2)
- Microbiota (2)
- Microorganism (2)
- Micropatterning (2)
- Microplastic (2)
- Microplastics (2)
- Mikroorganismen (2)
- Model (2)
- Monoverbrennung (2)
- Monoverbrennungsanlage (2)
- Museum Pests (2)
- Nano particle (2)
- Nanofasern (2)
- Nanomaterialien (2)
- Neuropeptide (2)
- Nitrification inhibitor (2)
- Non invasive analysis (2)
- Nosema ceranae (2)
- Nuclear waste (2)
- Nutrient (2)
- Optics (2)
- Osmia bicornis (2)
- P-Recyclingdünger (2)
- PGAA (2)
- PIXE (2)
- Particle gas emission (2)
- Particle size (2)
- Particle size distributuion (2)
- Particulate emission (2)
- Per- and polyfluorinated alkyl substances (PFASs) (2)
- Perceived intensity (2)
- Permeable reactive barriers (2)
- Persister cells (2)
- Phopshorus recovery (2)
- Pigment analyses (2)
- Pigment identification (2)
- Plant pathogen (2)
- Plume (2)
- Pollutant (2)
- Pollutants (2)
- Provenance studies (2)
- Prozessmonitoring (2)
- Pseudomonas aeruginosa (2)
- Purification (2)
- RFA (2)
- Radon (2)
- Reactive oxygen species (2)
- Recycling fertiliser (2)
- Recycling fertilisers (2)
- Reduction process (2)
- Reductive amination (2)
- Reference method (2)
- Regulations (2)
- Reproduzierbarkeit (2)
- Restoration and conservation (2)
- Risk assesment (2)
- SCALE (2)
- Sanierung (2)
- Sapphire (2)
- Scattering (2)
- Schadstoffaustrag (2)
- Schimmel (2)
- Schutzschicht (2)
- Schutzschichten (2)
- Secondary Recources (2)
- Sequenzielle Extraktion (2)
- Setzmaschine (2)
- Sewage sludge ordinance (2)
- Shale (2)
- Simulation (2)
- Size distribution (2)
- Size resolved chemical composition (2)
- Social immunity (2)
- Soil P species (2)
- Soil-like material (2)
- Solar panel (2)
- Solubility (2)
- Spatter (2)
- Stained glass (2)
- Stress (2)
- Structured light scanning (2)
- Struvit (2)
- Subaerial biofilm (2)
- Subaerial biofilms (2)
- Substance release (2)
- Sum parameter analysis (2)
- Sustainability (2)
- Synthetic organic pigments (2)
- Termite phylogeny (2)
- Test Guideline (2)
- Testguideline (2)
- Thermal extraction (2)
- Thermochemical treatment (2)
- Time resolved chemical composition (2)
- Total reflection X-ray spectroscopy (2)
- Transcriptomics (2)
- Tricalcium-silicate (2)
- Tricalciumsilikat (2)
- UV-irradiation (2)
- Umwelt (2)
- Umweltverträglichkeit (2)
- Uptake rate (2)
- VIS (2)
- VOC Emissionen (2)
- VOC-Emission (2)
- VOC-Emissionen (2)
- Vanadium (2)
- Virology (2)
- Vitrinen (2)
- Wasserzeichen (2)
- Waste-to-energy (2)
- Wild bees (2)
- Wooden toys (2)
- Writing inks (2)
- X-Ray fluorescence analyses (2)
- X-ray adsorption near-edge structure (XANES) spectroscopy (2)
- Zementersatz (2)
- Zementklinker (2)
- Zinnschlacke (2)
- Zitronensäure (2)
- Zustimmungen (2)
- fungus (2)
- genetics (2)
- melanin (2)
- (Semi)arid to humid-temperate natural ecosys (1)
- 13CO2 pulse labeling (1)
- 13th century (1)
- 16S rRNA gene (1)
- 2D nanomaterials (1)
- 3D Printing (1)
- 3D printer (1)
- A Greek palimpsest (1)
- A key interface (1)
- A-DNA conformation (1)
- AEROMET II (1)
- AEROMET project (1)
- AMR (1)
- AOF (1)
- ASAP-MS (1)
- ATR-FTIR (1)
- Abdichtungssysteme (1)
- Abfalltrennung (1)
- Abfälle (1)
- Abwasserreinigung (1)
- Academia (1)
- Accelerated aging (1)
- Accuracy (1)
- Acidobacteria (1)
- Adaptation (1)
- Adaption (1)
- Additive manufacturing (1)
- Advanced Materials (1)
- Advanced groups of termites (1)
- Aerodynamic levitation (1)
- Aerosol element alanysis (1)
- Aerosol element mass concentration (1)
- Aerosol gravimetry (1)
- Aerosol measurement instruments (1)
- Aerosol spectroscopy (1)
- Aerosolforschung (1)
- Aerosols (1)
- Aerosolsensor (1)
- Affinity extraction (1)
- Affinity support (1)
- Ag-LDI-MS (1)
- AgBB Bewertung (1)
- Agarose (1)
- Ageing (1)
- Aging (1)
- Aging test (1)
- Aging tests (1)
- Agricultural mycology (1)
- Air analysis (1)
- Air pollution control (1)
- Air quality (1)
- Airborne Particles (1)
- Alexander von Humboldt (1)
- Alit (1)
- Alite hydraulic reactivity (1)
- Alkali zinc borate glass (1)
- Alkylating agents (1)
- Altlasten (1)
- Aluminum (1)
- Aluminum oxide (1)
- Amate (1)
- Ambient aerosol (1)
- Ambient air (1)
- Ambient air pollution (1)
- Amino acid analysis (1)
- Ammoniak (1)
- Amphiphilic polymer (1)
- Amplicon sequencing (1)
- Anaerobic pathways (1)
- Analytical Chemistry (1)
- Analytical chemistry (1)
- Analytical screening techniques (1)
- Analytical standards (1)
- Analytische Methode (1)
- Ancient INKS (1)
- Ancient document production (1)
- Animal immune system (1)
- Anodization (1)
- Anti-microbial effects (1)
- Antiadhesive surfaces (1)
- Antibacterial (1)
- Antibacterial coatings (1)
- Antibacterial polymer (1)
- Antibacterial surfaces (1)
- Antibakterielle Oberflächen (1)
- Antibiotic (1)
- Antibiotic resistance (1)
- Antibody purification (1)
- Antifouling (1)
- Antimicrobial Resistance (1)
- Antimicrobial materials (1)
- Antimicrobial test (1)
- Antimicrobial testing (1)
- Antimony black (stibnite) (1)
- Antiseptic agents (1)
- Aquatic fungi (1)
- Aquatische Toxizität (1)
- Aqueous synthesis (1)
- Arabic recipes (1)
- Arbuscular mycorrhiza (1)
- Archaeological provenance (1)
- Archaeometric studies (1)
- Architektur (1)
- Archéométrie (1)
- Aromatic amino acid analysis AAAA (1)
- Aromatic amino acid analysis aaaa (1)
- Artificial weathering (1)
- Ascomycetes (1)
- Ascosphaera apis (1)
- Ashes (1)
- Aspergillus (1)
- Aspergillus flavus (1)
- Assessment (1)
- Astrobiology (1)
- Atomic force microscopy (1)
- Aufbau von Festkörpern (1)
- Aufbereitung (1)
- Aufbereitungstechnik (1)
- Auslaugtests (1)
- Auslaugverfahren (1)
- Auswaschung (1)
- Auswaschverlauf (1)
- Auswaschversuche (1)
- Authentifizierung (1)
- Autoclave tests (1)
- Autoklaventest (1)
- Automated analysis (1)
- BAM Data Store (1)
- BAM-Zulassung (1)
- BEMMA Bewertung (1)
- BESSY (1)
- BFR (1)
- BMU (1)
- BODIPY (1)
- BODIPY dye (1)
- BSA (1)
- BTEX (1)
- Bacillus subtilis (1)
- Bacteria repellent surfaces (1)
- Bacteria-repellent surfaces (1)
- Bacterial cell cycle (1)
- Bacterial growth (1)
- Bacterial infection (1)
- Bacterial second messenger (1)
- Bakterien (1)
- Baltic Sea (1)
- Bankia sp (1)
- Basidiomycetes (1)
- Basin (1)
- Batch tests (1)
- Bathyarchaeia (1)
- Bauhaus (1)
- Bauhaus Weimar (1)
- Bauprodukt (1)
- Bauproduktenverordnung (1)
- Bauxite residue (1)
- Bawit (1)
- Bee diseases (1)
- Bee health (1)
- Bees (1)
- Begasung (1)
- Behavioural mechanisms (1)
- Beneficial microbes (1)
- Berliner Tuffsteinfassaden (1)
- Beschichtung (1)
- Bestandserhaltung (1)
- Beständigkeit (1)
- Betondickglasfenster des Glockenturms am Eiermannbau (1)
- Bewertung (1)
- Bewertungsverfahren (1)
- Bio-P-Kläranlage (1)
- Bio-based insulation (1)
- Bio-receptive (1)
- Bioactive glass (1)
- Bioavailability (1)
- Bioceramics (1)
- Biocides in the environment (1)
- Bioconjugation (1)
- Biodegradation (1)
- Biodeterioration and biodegradation (1)
- Biofilm quantification (1)
- Biofilme (1)
- Bioilm (1)
- Bioinformatics virology viruses software (1)
- Biokorrosion (1)
- Biological Control (1)
- Biological control (1)
- Biologically induced mineral weathering (1)
- Biologische Bekämpfung (1)
- Biomimetic (1)
- Bioseparation (1)
- Biosphere (1)
- Biosphere-technosphere interaction (1)
- Biotests (1)
- Biotic environment (1)
- Biotische/abiotische Faktoren (1)
- Biphasic growth (1)
- Black Ink (1)
- Black microcolonial fungi (1)
- Black writing ink (1)
- Blast-furnace sludge (1)
- Blue Angel ecolabel (1)
- Bodenbelag (1)
- Bodenbeläge (1)
- Bodenmaterialien (1)
- Book production (1)
- Botrytis (1)
- Bovine serum albumin (1)
- Building Material (1)
- Building material (1)
- Building materials (1)
- Building product (1)
- Building products (1)
- Built environment (1)
- Bushveld Complex (1)
- Byzantine manuscript (1)
- Bürogeräte mit Druckfunktion (1)
- C-di-GMP (1)
- CCQM (1)
- CEC-L-103 (1)
- CFRP (1)
- CHC (1)
- COST (1)
- COST Action (1)
- COST action CA15114 AMICI (1)
- COVID (1)
- CPC calibration (1)
- CRISPR dCas9 (1)
- CRISPR/Cas9 (1)
- CRM (1)
- CaNaPO4 (1)
- Calcareous deposits (1)
- Calcium carbonate (1)
- Calibration (1)
- Calibration transfer (1)
- Carbonbeton (1)
- Carbonfasern (1)
- Carolingian (1)
- Carotenoids (1)
- Carrier (1)
- Cascade impector (1)
- Cast iron (1)
- Cathodic protection (1)
- Cell appendages (1)
- Cell studies (1)
- Cell-envelope (1)
- Cellulose ether (1)
- Cellulose synthase (1)
- Cerium oxide (1)
- Chamber measurement (1)
- Chamber-test (1)
- Characterisation (1)
- Characterization (1)
- Chemical composition (1)
- Chemical ecology (1)
- Chemical extraction (1)
- Chemical extraction methods (1)
- Chemical recycling (1)
- Chemicals (1)
- Chemische Beständigkeit (1)
- Chemische Löslichkeit (1)
- Chemisches Recycling (1)
- Chicken manure (1)
- Chicken manure ash (1)
- Chilean Coastal Cordillera (1)
- Chinese Paper (1)
- Chlorination (1)
- Chlorine (1)
- Chromitites (1)
- Clean steel (1)
- Cleridae (1)
- Climate gradient (1)
- Climate responsive materials (1)
- Cloning vectors (1)
- Close proximity to colonies (1)
- Co-combustion (1)
- Cobalt (1)
- Cockroaches (1)
- Codex (1)
- Codex Miscellaneus (1)
- Codicology (1)
- Cognitive performance (1)
- Coleoptera (1)
- Colorants (1)
- Colored glasses (1)
- Colouring (1)
- Combustion and gasification (1)
- Community composition (1)
- Community-level interactions (1)
- Comparison (1)
- Concept (1)
- Conditioning layer (1)
- Confocal microscopy (1)
- Coniophora puteana (1)
- Conjugate (1)
- Conjugation (1)
- Constantinomyces (1)
- Construction and demolition waste (1)
- Construction materials (1)
- Construction product (1)
- Construction products regulation (CPR) (1)
- Consumer article (1)
- Consumer articles (1)
- Contaminant transfer (1)
- Contraction (1)
- Control (1)
- Controllable gene expression (1)
- Controlled atmosphere (1)
- Controlled release fertilisers (1)
- Copper (1)
- Copper-based wood preservatives (1)
- Coptic manuscripts (1)
- Coptic papyri (1)
- Coptic studies (1)
- Coptotermes (1)
- Core microbiome (1)
- Core/shell nanoparticle (1)
- Corrosion environment (1)
- Corrosion product (1)
- Corundum (1)
- Covid (1)
- Cribellate spiders (1)
- Crispr-Cas9 (1)
- Crispr/Cas9 (1)
- Critical raw materials (1)
- Cross-feeding (1)
- Cross-sectioning (1)
- Cryo XPS (1)
- Cryptoendolithic black fungus (1)
- Crystalline phase identification (1)
- CuNPs (1)
- Cubical shape (1)
- Cultural Entomology (1)
- Cultural Heritage (1)
- Culuative energy demand (1)
- Cupriavidus campinensis (1)
- Cuticular hydrocarbons (1)
- Cyanobacteria (1)
- DGT-Methode (1)
- DIN EN 350 (1)
- DIN EN 717-1 (1)
- DMAS (1)
- DNA barcode (1)
- DNA polymerase (1)
- DSM 5009 (1)
- Damage repair (1)
- Dauerhaftigkeit (1)
- De novo assembly (1)
- Decomposition point (1)
- Degradable polymer (1)
- Dendrimer (1)
- Denitrification (1)
- Deponiebau (1)
- Deponierung (1)
- Deponieverordnung (1)
- Desert ecology (1)
- Desiccation (1)
- Deterioration (1)
- Developing building materials (1)
- Development (1)
- Dichtesortierung (1)
- Dielectric heating (1)
- Dietary adaptation (1)
- Differential expression (1)
- Differential gene expression analysis (1)
- Diffractive gratings (1)
- Diffusive Gradients in Thin-films (DGT) (1)
- Digitalisation (1)
- Digitalisierung (1)
- Direct laser writing (1)
- Direct material input (1)
- Disinfection Fuel (1)
- Dispay case (1)
- Dispergierung von Glaspartikeln (1)
- Dispersion of carbon pigments (1)
- Dispersion of glass particle (1)
- Display case (1)
- Disposal (1)
- Diversity (1)
- Diversität (1)
- Domestikation (1)
- Dothideomycetes (1)
- Downstream processing (1)
- Draft Genome (1)
- Drawing (1)
- Driving rain (1)
- Druck (1)
- Drywood termite (1)
- DsRNA (1)
- Durability (1)
- Dye (1)
- Dyes and pigments (1)
- Dynamic calibration gas mixtures (1)
- Dynamic surface leaching test (1)
- E$volution (1)
- EAF slags (1)
- EDX Analysis (1)
- EN 717-1 (1)
- EN 717-3 (1)
- EOF/AOF (1)
- EPS (1)
- EU EMPIR (1)
- EU regulations (1)
- Early european inks (1)
- Earthen building materials (1)
- Eco-efficiency analysis (1)
- Ecology (1)
- Ecotoxicity testing (1)
- Ecotoxicity tests (1)
- Ecotoxicological tests (1)
- Ecotoxixity (1)
- Edible insects (1)
- Effective uptake rate (1)
- Efficacy (1)
- Efflux (1)
- Egypt (1)
- Eisengallustinte (1)
- Electric arc furnace (EAF) slags (1)
- Electric arc furnace slags (1)
- Electrochemical remediation (1)
- Electronic (1)
- Electronic Lab Notebook (ELN) (1)
- Electronic lab notebook (ELN) (1)
- Elektrolichtbogenofen (1)
- Element analysis (1)
- Element mass concetration (1)
- Elemental aerosol analysis (1)
- Elemental composition (1)
- Elimination (1)
- Eluates (1)
- Eluatwerte (1)
- Emerging Contaminants (1)
- Emission Test Chamber (1)
- Emission Testing (1)
- Emission chamber testing (1)
- Emission chambers (1)
- Emission test chamber procedure (1)
- Emission test method (1)
- Emissions of hazardous gases (1)
- Emissionsfunktionen (1)
- Emissionsmessungen (1)
- Emissionsprüfkammer (1)
- Emissionsprüfung (1)
- Emisson testing (1)
- Enamel colors (1)
- Enamels (1)
- Encre (1)
- Entomopathogenic Fungus (1)
- Entropy (1)
- Entwicklung (1)
- Environmental Chemistry (1)
- Environmental Engineering (1)
- Environmental analysis (1)
- Environmental assessment (1)
- Environmental conditions (1)
- Environmental friendly (1)
- Environmental impact (1)
- Environmental simulations (1)
- Epidemal layer (1)
- Erfurt (1)
- Ergebnisunsicherheit (1)
- Essential oils (1)
- Europa (1)
- European research area (1)
- Eurotiomycetes (1)
- Exergie (1)
- Exergy (1)
- Exocrine gland (1)
- Expansion (1)
- Experimental evolution (1)
- Exposure (1)
- Exposure risk (1)
- External (1)
- Extracellular enzymes (1)
- Extractable organic fluorine (1)
- Extraction (1)
- Extraktion (1)
- Extraktionen (1)
- Extraktionsversuche (1)
- Extrazelluläre Polysaccharide (1)
- Extreme environments (1)
- Extremophile (1)
- Extremophiles (1)
- Extremophilic fungi (1)
- F pili (1)
- FAT class concept (1)
- FFF-3D printer (1)
- FFF-3D printing (1)
- FFF-filament (1)
- FFF-printing (1)
- FT-Raman (1)
- FTIR spectroscopy (1)
- FTIR-, XRF-, VIS- espectroscopia (1)
- FactSage calculations (1)
- FactSageTM calculations (1)
- Fakes (1)
- Family archives (1)
- Faraday cup aerosol electrometer (1)
- Farbenlehre (1)
- Fassaden (1)
- Fassadenfarbe (1)
- Fassadenfarben (1)
- Fatigue (1)
- Façade (1)
- Feeding behaviour (1)
- Femtosecond laser processing (1)
- Fenton-like reaction (1)
- Fiber (1)
- Fibre (1)
- Fibre analysis (1)
- Filament comparison (1)
- Fire-retardant paint (1)
- Flame-retardant (1)
- Flammschutzmittel (1)
- Flask method (1)
- Flexible shadow masks (1)
- Flotation (1)
- Flow chamber system (1)
- Flow-System (1)
- Flow-system (1)
- Fluor XANES (1)
- Fluorescence spectroscopy (1)
- Fluorescent microscopy (1)
- Fluorescent proteins (1)
- Fluoride nanoparticles (1)
- Fluorides (1)
- Fluorolytic sol-gel synthesis (1)
- Fluorolytic sol−gel (1)
- Fluorometric sensing (1)
- Flügel (1)
- Food (1)
- Food fermentation (1)
- Food safety (1)
- Force distance curve (1)
- Forest fires (1)
- Forest soils (1)
- Forgery (1)
- Formation enthalpy (1)
- Forschungsdatenmanagement (1)
- Forschungsförderung (1)
- Forschungsstrategie (1)
- Foward genetics (1)
- Fractal structure (1)
- Fractional factorial (1)
- Fragmented manuscripts (1)
- Freisetzung (1)
- Freisetzung und Transfer von Schadstoffen (1)
- Fuel sorption (1)
- Functionalized graphene (1)
- Fungal decay (1)
- Fungal stress mechanisms and responses (1)
- Fungicidal property (1)
- Fungiculture (1)
- Fusarium (1)
- Fällmittel (1)
- Fälschungserkennung (1)
- GC-FID (1)
- GC-MS (1)
- GDL (1)
- GNBP-2 (1)
- Gas analysis (1)
- Gas chromatography - mass spectrometry (GC-MS) (1)
- Gas sensing (1)
- Gas storage (1)
- Gebindekonservierung (1)
- Gebührenverordnung (1)
- Gene expression (1)
- Gene network (1)
- General Chemistry (1)
- General Environmental Science (1)
- General Materials Science (1)
- General Medicine (1)
- Genetic engineering (1)
- Genetic tools (1)
- Genetik (1)
- Genetisches Barcoding (1)
- Genizah du Caire (1)
- Genome (1)
- Genome editing (1)
- Geobiology (1)
- Geological formation (1)
- Geology (1)
- Geomembranes (1)
- Gesteinskorrosion (1)
- Gesteinskörnungen (1)
- Gesundheit (1)
- Gipsabfälle (1)
- Gipsrecycling (1)
- Giulio Romano (1)
- Glas (1)
- Glasanalyse (1)
- Glass paints (1)
- Gleichgewicht (1)
- Gleichwertigkeit Messverfahren (1)
- Global radiation (1)
- Gold (1)
- Gold mit Synchrotronstrahlung (1)
- Gothic incursions (1)
- Granulat (1)
- Graphene (1)
- Graphene–bacteria interaction (1)
- Gray mold fungus (1)
- Green facades (1)
- Green pesticide (1)
- Greenhouse gas accounting (1)
- Greenhouse gas balance (1)
- Greenhouse gas mitigation (1)
- Grouts (1)
- Growth-rate homeostasis (1)
- Grundwasser (1)
- Größe (1)
- Gut symbionts (1)
- Gypsum plasterboards (1)
- Gypsum waste (1)
- Gütezeichen (1)
- H2-Abbau (1)
- HR-CS-GFMAS (1)
- HR-GF-MAS (1)
- Halogenation (1)
- Halophilic (1)
- Halophilic bacteria (1)
- Hausbock (1)
- Hausbockkäfer (1)
- Hazardous waste (1)
- Haze Samples (1)
- Hazenite (1)
- Headspace GC-MS (1)
- Health, Toxicology and Mutagenesis (1)
- Healthcare (1)
- Heat capacity (1)
- Heat maps (1)
- Heavy metal free (1)
- Heavy metals (1)
- Hebrew studies (1)
- Hellenistic (1)
- Herbaspirillum seropedicae (1)
- Herculaneum papyri (1)
- Hermopolis (1)
- Herteogeneous phenotypes (1)
- Heterologous expression (1)
- High density polyethylene (1)
- High salinity (1)
- Hinterglasmalerei (1)
- Historic buildings (1)
- Historic ink (1)
- History of Art (1)
- Holy Family (1)
- Holzschutz, (1)
- Holzschutzmittel (1)
- Holzwurm (1)
- Honey bee (1)
- Honeybee (1)
- Hospital premises (1)
- Host and symbiont ecology (1)
- Host immunity (1)
- Household waste (1)
- Human plasma (1)
- Hydration products (1)
- Hydraulic engineering (1)
- Hydrogen permeation (1)
- Hydrogen storage (1)
- Hydrogenasen (1)
- Hydrophobic interaction (1)
- Hygienic behavior (1)
- Hylotrupes bajulus (1)
- Hylotrupes bajulus, Anobium punctatum, natural durability, tropical wood, native wood. (1)
- Hyperarid (1)
- Hyperbranched polymer (1)
- Hypermutation (1)
- Hypopharynx (1)
- ICP-OES (1)
- IEQ (1)
- IPM in museums (1)
- IR spectroscopy (1)
- ISO 22196 (1)
- ISO REMCO (1)
- ISO/TC 229 Nanotechnologies (1)
- ISO22196 (1)
- ITS region (1)
- Idiopathic environmental intolerance (1)
- Igg (1)
- Illness-induced anorexia (1)
- Illuminated manuscripts (1)
- Immune gene prediction (1)
- ImmunoDB (1)
- Immunoglobulins (1)
- Immunoprecipitation (1)
- Implants (1)
- In situ synchrotron x-ray diffraction (1)
- In-situ Process Monitoring (1)
- In-vivo mutagenesis (1)
- Incubated soil/fertilizer mixtures (1)
- Indirect photolysis (1)
- Indoor Air Quality (1)
- Indoor Air: Adsorbent performance (1)
- Indoor Products (1)
- Indoor air (1)
- Indoor emission (1)
- Indoor mycobiome (1)
- Industrial and Manufacturing Engineering (1)
- Industrial applications (1)
- Industrial mycology (1)
- Industrielles Abwasser (1)
- Infecting a number of insects, (1)
- Infections (1)
- Infrared thermography (1)
- Initial attachment (1)
- Ink corrosion (1)
- Ink fingerprint (1)
- Ink terminology (1)
- Innenraumluft (1)
- Innenraumluftqualität (1)
- Innenraumluftqualtität (1)
- Insect evolution (1)
- Insecticide (1)
- Insektenmonitoring (1)
- Instrumental analysis of ink (1)
- Instrumentation (1)
- Integrated Museum Pest Management (IMPM) (1)
- Inter-comparison (1)
- Inter-lab comparison (1)
- Inter-laboratory test (1)
- Intercomparison (1)
- Interdisciplinarity (1)
- Internal pores (1)
- Intraparticle diffusion (1)
- Intumescent coating (1)
- Iodine (1)
- Ionic liquid (1)
- Ionizing radiation (1)
- Iron gall ink (1)
- Iron making (1)
- Iron oxide (1)
- Iron scrap (1)
- Isothiazolinone (1)
- Isotopes (1)
- Issues (1)
- Jewish cultures (1)
- Jig (1)
- Johann Wolfgang von Goethe (1)
- Joint grouts (1)
- Kaiser-Wilhelm-Gedächtniskirche (1)
- Kandelaber des Ensembles am Charlottenburger Tor (1)
- Kleidermotte (1)
- Klimaneutralität (1)
- Kläranlage (1)
- Klärschlammdüngung (1)
- Knock-out mutant (1)
- Kontamination (1)
- Kontamination von H2 (1)
- Korynaetes caeruleus (1)
- Kraftstoffabbau (1)
- Kraftstoffbehälter (1)
- Kristallsystem (1)
- Kulturguterhaltung (1)
- Kumulierter Energieaufwand (1)
- Kunstrasen (1)
- Kunststoff-Dränelement (1)
- Kunststoffsportbeläge (1)
- Kunsttechnologie (1)
- Kupfer (1)
- LCA (1)
- LCC (1)
- LIBS (1)
- Laboratory breeding (1)
- Labrum (1)
- Laccase (1)
- Lake Cadagno (1)
- Landfill (1)
- Landfill lining (1)
- Landwirtschaftliche Klärschlammverwertung (1)
- Laser Printer (1)
- Laser printer emission (1)
- Laser structuring (1)
- Laser-Materialbearbeitung (1)
- Laser-induced nanostructures (1)
- Laser-induced pariodic surface structures (1)
- Laser-induced periodic surface structueres (LIPPS) (1)
- Laser-modified surface (1)
- Layer-by-Layer (1)
- Lead (1)
- Lead books (1)
- Lebensmittelindustrie (1)
- Leichtbau (1)
- Lfe cycle assessment (1)
- Library pests (1)
- Lifetime (1)
- Light regulation (1)
- Light sensing (1)
- Light-induced stress (1)
- Lightning talk (1)
- Lightweighting (1)
- Lignocellulose (1)
- Limit values (1)
- Limitations (1)
- Limnoria spp (1)
- Linker (1)
- Low alloy steel (1)
- Low cost aerosol PM sensor (1)
- Low melting glasses (1)
- Low-molecular-weight organic substances (1)
- Low-tech approach (1)
- Luftgüte (1)
- Lysimeter, Antimony (1)
- MDG ICP-ToF-MS (1)
- MIC Island (1)
- MIC projekt (1)
- MSWI Bottom Ash (1)
- MSWI fly ash (1)
- Major transition (1)
- Manuscript making (1)
- Manuscripta Americana, Techialoyan (1)
- Manuscrits (1)
- Map production and publishing (1)
- Maps and colours (1)
- Marek's Disease Virus (1)
- Marek's virus (1)
- Marine borers (1)
- Market surveillance (1)
- Mask fabrication (1)
- Mass spectrometry (1)
- Mass spectroscopy (1)
- Material Analysis (1)
- Material analysis (1)
- Material degradation (1)
- Material emissions testing (1)
- Material recycling (1)
- Material surface colonisation (1)
- Materialkreislauf (1)
- Materials (1)
- Materials Chemistry (1)
- Materials emissions testing (1)
- Materials flow (1)
- Mathematical analysis (1)
- Mathematical modelling (1)
- Mechanische Stabilität (1)
- Mechanisms of pathogenesis (1)
- Mechanosensitive channel (1)
- Medical mycology (1)
- Medieval glasses (1)
- Medieval-stained glass (1)
- Melanin Adhesion (1)
- Melanins (1)
- Melting point (1)
- Melting temperature (1)
- Metabolic engineering (1)
- Metabolic flux analysis (1)
- Metabolic modeling (1)
- Metadata (1)
- Metal organic frameworks (1)
- Metal recovery (1)
- Metal reducing bacteria (1)
- Metallic silver precipitates (1)
- Metallkorrosion (1)
- Metalls (1)
- Metals (1)
- Metals and Alloys (1)
- Metarhizium (1)
- Metarhizium robertsii DSM 1490 (1)
- Methane (1)
- Methanogene (1)
- Methanogenesis (1)
- Methode (1)
- Methoden (1)
- Methods of scientific analysis (1)
- Microbe (1)
- Microbial abundance (1)
- Microbial adhesions (1)
- Microbial communities (1)
- Microbial community modelling (1)
- Microbial simulation, (1)
- Microbially Induced Corrosion (1)
- Microbially induced carbonate precipitation (MICP) (1)
- Microbiologically Influrenced Corrosion (MIC) (1)
- Microchamber (1)
- Microdroplet generator (1)
- Microfluidics (1)
- Micromonospora aurantiaca (1)
- Microwaves (1)
- Migration (1)
- Mikrobiell (1)
- Mikrobielle Gemeinschaft (1)
- Millipedes (1)
- Mineral (1)
- Mineral weathering (1)
- Mining (1)
- Mircobially influcenced corrosion (1)
- Mixed Inks (1)
- Mixture toxicity (1)
- Mobile anodisation (1)
- Mobile application (1)
- Model aerosols (1)
- Model organism (1)
- Modeling (1)
- Modellierung (1)
- Modern painting (1)
- Modified mycotoxins (1)
- Moisture (1)
- Moisture performance (1)
- Molecular (1)
- Molecular Organic Frameworks (1)
- Molecular clock (1)
- Molecular identification (1)
- Molybdenum (1)
- Monoterpene (1)
- Moriscos (1)
- Moyen-âge (1)
- MscS (1)
- Mud volcanoe fluids (1)
- Multi-resistant bacteria (1)
- Multi-scale study (1)
- Multicellularity (1)
- Multidisciplinary (1)
- Multigassensorik (1)
- Multilocus phylogeny (1)
- Multiple Displacement Amplification (1)
- Multiple chemical sensitivity (1)
- Multiple lines of evidence (1)
- Multiport (1)
- Municipal sewage sludge (1)
- Municipal solid waste (1)
- Museum insect pest (1)
- Museum pests (1)
- Museumsschädling (1)
- Museumsschädlinge (1)
- Museumsvitrine (1)
- Museumsvitrinen (1)
- Mussel-inspired coating (1)
- Mussel-inspired materials (1)
- Mutagenesis (1)
- MySpot (1)
- Mycotoxin (1)
- Mycotoxins (1)
- Müllverbrennung (1)
- N and K analog tracer (1)
- NDT (1)
- NFDI (1)
- NGS (1)
- NIR imaging (1)
- NIR reflectography (1)
- Nachhaltigkeit (1)
- Nachsorge (1)
- Nano CRM (1)
- Nano Particles (1)
- Nano characterization (1)
- Nano metal fluorides (1)
- Nano-Fourier-transform infrared spectroscopy (1)
- Nano-materials (1)
- Nano@BAM (1)
- NanoPlattform (1)
- Nanobiocide (1)
- Nanocarrier (1)
- Nanocoating (1)
- Nanoplattform (1)
- Nanopowder (1)
- Nanorods (1)
- Nanotechnologie (1)
- Natural abundance of 15N (1)
- Natural durability (1)
- Natural ecosystems (1)
- Natural products discovery (1)
- Near ambient pressure XPS (1)
- Near ambient x-ray photoelectron spectroscopy (1)
- Near-infrared refectography (1)
- Near-infrared refelctography (1)
- Neozoon (1)
- Netzwerk (1)
- Neuartige Materialien (1)
- Neutralammoniumcitrat (1)
- Neutralammoniumnitrat (1)
- New exocrine organ (1)
- Next generation sequencing (1)
- Nickel (1)
- Niedrig schmelzend (1)
- Niobium (1)
- Nitrate (1)
- Nitrogen fixation (1)
- Nitrogen uptake (1)
- Nitrososphaerales (1)
- Nitrous oxide (1)
- Non destructive (1)
- Non-destructive Materials (1)
- Non-destructive test (1)
- Non-ferrous metals (1)
- Non-invasive (1)
- Non-invasive scientific methods (1)
- Non-vitriolic iron-gall inks (1)
- Nonspecific binding (NSB) (1)
- Nonvolatile (1)
- Norm (1)
- Nostoc (1)
- Nostoc punctiforme (1)
- Novel sample preparation techniques (1)
- Novelle BBodSchV (1)
- Nuclear waste disposal (1)
- Nutrient acquisition (1)
- Nutrient cycles (1)
- Nutrient uplift and recyclin (1)
- OIT (1)
- Oberflächenfunktionalisierung (1)
- Oddy test (1)
- Office machines (1)
- Oil (1)
- Oil and gas industry (1)
- Oil and gas reservoir (1)
- Oilfield (1)
- On-Line Analyse (1)
- On-line analysis (1)
- One-step ionic liquids synthesis (1)
- Open data (1)
- OpenBIS (1)
- Operating Procedure (1)
- Optical properties of ink (1)
- Optical and Magnetic Materials (1)
- Optical properties (1)
- Optische Tomografie (1)
- Ordinance on Contaminated Sites and Soil Protection (1)
- Organic contaminants (1)
- Organic phosphorus breakdown (1)
- Organo fluorine analysis (1)
- Osmophobic effect (1)
- Osmotic shock (1)
- Osteogenesis (1)
- Oxide melts (1)
- Oxyfuel-Verbrennung (1)
- P sink method (1)
- P speciation (1)
- P-Recyclate (1)
- P-Rückgewinnung (1)
- P-Senken (1)
- P-efficiency (1)
- P-recovery (1)
- P. Fluorescens (1)
- PAH (1)
- PBFSM (1)
- PE-HD (1)
- PFAS analysis (1)
- PFAS analytics (1)
- PM (1)
- PM monitors (1)
- PP (1)
- PS (1)
- PV modules (1)
- Painting (1)
- Paints (1)
- Palaeography (1)
- Palimpsest (1)
- Paper (1)
- Paper sizings (1)
- Paper tinting (1)
- Paratext (1)
- Parerga (1)
- Particle (1)
- Particle Size (1)
- Particle emission (1)
- Particle synthesis (1)
- Particulate emissions (1)
- Partikeldurchmesser (1)
- Partikeln (1)
- Parylene C (1)
- Pathogen spillover (1)
- Pathogen transmission (1)
- Pathogen virulence (1)
- Pentimenti (1)
- Peptide-derived components (1)
- Per- and polyfluorinated alkly substances (PFASs) (1)
- Per- and polyfluoroalkyl substances (PFAS) (1)
- Per- und Polyfluoroierte Alkylsubstanzen (PFAS) (1)
- Perfluorierte Verbindungen (1)
- Perfluorocarboxylic acid (PFCA) (1)
- Performance (1)
- Performance comparison (1)
- Pergamonmuseums (1)
- Periodate oxidation (1)
- Permeability (1)
- Permeat (1)
- Perowskit (1)
- Persian historical recipes (1)
- Persian manuscript (1)
- Pest control (1)
- Pesticides (1)
- Pflanzenverfügbarkeit (1)
- Pflanzenwurzel (1)
- Phase formation (1)
- Phase separation (1)
- Phase transformation (1)
- Phenotypic heterogeneity (1)
- Phenotypic variation (1)
- Phoshpor availability (1)
- Phosphate dynamics (1)
- Phosphate extractability and availability (1)
- Phosphates (1)
- Phosphonic acids (1)
- Phosphor-Rückgewinnung (1)
- Phosphorbestimmung (1)
- Phosphorous recovery (1)
- Phosphorus K-edge-XANES spectroscopy (1)
- Phosphorus availability (1)
- Phosphorus elimination (1)
- Phosphorus plant-availability (1)
- Phosphorus recycling (1)
- Phosphous recovery (1)
- Photocatalytic surfaces (1)
- Photodynamic therapy (1)
- Photometric P determination (1)
- Photonics (1)
- Photoperception (1)
- Photoreceptors (1)
- Phototrophic bacteria (1)
- Phototrophs (1)
- Phyllosphere (1)
- Physical and optical characteristics (1)
- Pilot comparison (1)
- Pilz (1)
- Pilze (1)
- Plant Experiment (1)
- Plant availability (1)
- Plant economic spectrum (1)
- Plant growth test (1)
- Plant-availability (1)
- Plasma (1)
- Plastic biofilm (1)
- Plastic degradation (1)
- Plastic pollution (1)
- Plastic waste (1)
- Platinum (1)
- Poficiency test (1)
- Pollution (1)
- Polydopamine (1)
- Polyelektrolyt (1)
- Polyethylene terephthalate (1)
- Polyfluorinated alcohol (PFOH) (1)
- Polyioinic liquid (1)
- Polymer (1)
- Polymer foils (1)
- Polymer-based products (1)
- Polymerase mutant (1)
- Polypropylen (1)
- Polypropylene (1)
- Polystyrene (1)
- Polystyrol (1)
- Polyurethanes (1)
- Porosity (1)
- Portrayal of St Joseph (1)
- Poster presentation (1)
- Pot experiment (1)
- Pot experiments (1)
- Potential toxic elements (1)
- Prallzerkleinerungsverfahren (1)
- Preferential binding (1)
- Preferential exclusion (1)
- Preis- Leistungsverzeichnis (1)
- Preservation (1)
- Printing (1)
- ProMoAM (1)
- Probiotic-based vaccines (1)
- Probiotics (1)
- Process Metallurgy (1)
- Process control (1)
- Process development (1)
- Process monitoring (1)
- Process upscaling (1)
- Proficiency Test (1)
- Proficiency testing (1)
- Projekte (1)
- Proofreading deficient (1)
- Prospective risk assessment (1)
- Protective glazing (1)
- Protein (1)
- Protein a (1)
- Protein hydrolysis (1)
- Protein immobilization (1)
- Protein quantification (1)
- Proteome (1)
- Proteomics (1)
- Proton conductivity (1)
- Prüfkammer (1)
- Prürfrichtlinie (1)
- Pseudomonas (1)
- Pseudomonas fluorescens (1)
- Pseudomonas veronii (1)
- Ptinidae (1)
- Public Health, Environmental and Occupational Health (1)
- Push-out Test (1)
- Pyrolyse (1)
- Pyrolysis (1)
- QA/QC (1)
- Quality assurance/quality control (1)
- Quantum dot (1)
- Quasispecies (1)
- Qumranrollen (1)
- RAMAN (1)
- REACH (1)
- RNA extraction (1)
- RNA interference (1)
- RNA-Seq (1)
- RNA-Sequencing (1)
- RNAi (1)
- Radio waves (1)
- Radiocarbon (1)
- Radiografische Untersuchung (1)
- Radon exhalation (1)
- Raphael school (1)
- Reactor conditions (1)
- Real-time qPCR (1)
- Recipes (1)
- Recovery potential (1)
- Recovery rate (1)
- Recycled gypsum (1)
- Recycled sources (1)
- Recyclingdüngemittel (1)
- Red chalk (1)
- Red mud (1)
- Redensarten (1)
- Reduction (1)
- Reductive decomposition (1)
- Reductive defluorination (1)
- Reductive iron assimilation (1)
- Reduktionsprozess (1)
- Reference data (1)
- Reference nanoparticles (1)
- Reference organisms (1)
- Reference procedures (1)
- Reference samples (1)
- Regelwerk (1)
- Regulation (1)
- Reifenabrieb (1)
- Relative agronomische Effizienz (RAE) (1)
- Release kinetics (1)
- Religion (1)
- Research Data Infrastructure (1)
- Research Data Management (1)
- Research data management (1)
- Resistance model (1)
- Resource Recovery (1)
- Resources (1)
- Ressourceneffizienz (1)
- Ressourcenschonung (1)
- Retentat (1)
- Reverse painting on glass (1)
- Reverse paintings on glass (1)
- Reworking (1)
- Rhenanite (1)
- Rhizopus (1)
- Rhizopus and Aspergillus oryzae (1)
- Rhizosphere (1)
- Rhizosphere effect (1)
- Rhizosphere processes (1)
- Rhodonia placenta (1)
- Rice (1)
- Ringversuch P-Gehalt in Klärschlamm (1)
- Risikobewertung (1)
- Road construction waste (1)
- Robustness validation (1)
- Rock biofilm (1)
- Rock leaching (1)
- Rock-inhabiting black fungi (1)
- Rock-inhabiting fungi (1)
- Root economics space (1)
- Rostral gland (1)
- Rround robin test (1)
- Ruthenium (1)
- Röntgenspektroskopie (1)
- Rötel (1)
- Rückgewinnung (1)
- SARS (1)
- SAXS (1)
- SDS-PAGE (1)
- SEM (1)
- SEM micrography (1)
- SEM wood characterization (1)
- SEM-EDS (1)
- SERS (1)
- SIMS (1)
- SMPS (1)
- SOP (1)
- SPE extraction (1)
- SRB (1)
- SVOC (1)
- Safety (1)
- Salts (1)
- Sample preparation (1)
- Sc recovery (1)
- Scanning micro-X-ray fluorescence (1)
- Scattering-type scanning near-field optical microscopy (s-SNOM) (1)
- Schadgase (1)
- Schlacke (1)
- Schmetterlinge (1)
- Schriftrollen vom Toten Meer (1)
- Schutzverglasung (1)
- Schwermetalle (1)
- Schädling (1)
- Scribal corrections (1)
- Scythica Vindobonensia, (1)
- Secondary P-fertilizer (1)
- Secondary metabolism (1)
- Secondary metabolites (1)
- Secondary raw materials (1)
- Secondary resources (1)
- Sediment (1)
- Sekundärgipse (1)
- Sekundärrohstoff (1)
- Selection (1)
- Selective Chlorination (1)
- Selective quantification (1)
- Selektion (1)
- Self-assembled monolayer (1)
- Self-assembled monolayer (SAM) (1)
- Self-assembled monolayers (SAM) (1)
- Semivolatile organic compounds (1)
- Sensor (1)
- Sensors (1)
- Separate collection (1)
- Sequence annotation (1)
- Sets of archaeometric data (1)
- Sewage Sludge (1)
- Sewage Sludge Ashes (1)
- Sewage extraction (1)
- Sewage sludge ash (SSA) (1)
- Sewage sludge disposal (1)
- Sewage sludge incineration (1)
- Short crack propagation (1)
- Siderophore (1)
- Signal transduction (1)
- Silica and polystyrene nanoparticles (1)
- Silicate (1)
- Silicon carbide (1)
- Silver (1)
- Silver diffusion (1)
- Simulation of materials degradation (1)
- Single cell microbiology (1)
- Sintering (1)
- Sixteenth-century painting technique (1)
- Size exclusion chromatography (1)
- Sizing (1)
- Small angle x-ray scattering (1)
- Smartphone (1)
- Social Immunity (1)
- Social insect (1)
- Social insects (1)
- Sociality (1)
- Software (1)
- Soil contact (1)
- Soil extraction (1)
- Soil incubation study (1)
- Soil-feeding habit (1)
- Soil-like materials (1)
- Soils (1)
- Solar panels (1)
- Solar parks (1)
- Soldier (1)
- Solid phase (1)
- Solid phase extraction (SPE) (1)
- Solid-liquid extraction (1)
- Solid-phase extraction (SPE) (1)
- Solitary bees (1)
- Solute excretion (1)
- Solvents (1)
- Solvolyse (1)
- Solvolysis (1)
- Spectral imaging (1)
- Speziierungsanalyse (1)
- Spielzeug (1)
- Sportböden (1)
- Sportböden auf Kunststoffbasis (1)
- Sprache (1)
- Stained glass windows (1)
- Stained glasses (1)
- Stainless steel (1)
- Stakeholder (1)
- Stalwerksschlacke (1)
- Standardarbeitsanweisungen (1)
- Standardized test and quantification procedure (1)
- Standsicherheit (1)
- Steelmaking residues (1)
- Stoffstromanalyse (1)
- Stoichiometric homeostasis (1)
- Stone cultural heritage (1)
- Stop/flow experiments model (1)
- Strategy and Management (1)
- Stress conditions (1)
- Structural color (1)
- Sub-4nm particles (1)
- Subjective complaints (1)
- Subsocial (1)
- Subsoil nutrient tracing (1)
- Sugar cane bagasse (1)
- Sugarcane bagasse (1)
- Sum parameter (1)
- Sum parameter analyis (1)
- Summenparameter (1)
- Superhydrophilic surface (1)
- Superhydrophobic surface (1)
- Suppression (1)
- Surface chemistry (1)
- Surface functionalization (1)
- Surface interactions (1)
- Surface water (1)
- Surface waters (1)
- Surfacewaters (1)
- Survival rates (1)
- Synchotron (1)
- Synchrotron radiation (1)
- Synchrotron-XPS (1)
- Synergy (1)
- Synthesis (1)
- Synthetic metabolism (1)
- Systematics (1)
- TEM (1)
- TXRF ambient air aerosol chemical analysis aerosol element composition (1)
- Tanning (1)
- Tannins (1)
- Targeted and nontargeted (1)
- Tauchtest (1)
- Taxonomy (1)
- Technologietransfer (1)
- Temperate rain forest (1)
- Temperature and humidity (1)
- Temple Scroll (1)
- Tems (1)
- Terbutryn (1)
- Teredo sp (1)
- Termite control (1)
- Termite-associated microbes (1)
- Termiten (1)
- Termitoidae (1)
- Test method (1)
- Test strip (1)
- Teststreifen (1)
- Testverfahren (1)
- Text analysis (1)
- Textilschädling (1)
- Thermal Desorption (1)
- Thermal Extraction (1)
- Thermal analysis (1)
- Thermal degradation (1)
- Thermal imaging (1)
- Thermal properties (1)
- Thermische Abfallbehandlung (1)
- Thermo-desorption (1)
- Thermochemische Prozesse (1)
- Thermocouple (1)
- Thermodynamic (1)
- Thermografie (1)
- Thermographie (1)
- Thermoplastic filaments (1)
- Thioimidazolium (1)
- Tinting (1)
- ToF SIMS (1)
- ToF-SIMS (1)
- Tomography (1)
- Torah (1)
- Torah Scrolls (1)
- Torah scrolls (1)
- Touch surfaces (1)
- Trait-based ecology (1)
- Transition metals (1)
- Transmission electron microscopy (1)
- Transport modeling (1)
- Transposon (1)
- Tripartite interactions (1)
- Typology of Inks (1)
- Tyrosine (1)
- UV absorption (1)
- UV protection (1)
- UV tolerance (1)
- UV-VIS Reflectance spectroscopy (1)
- UV-VIS reflectance spectroscopy (1)
- Ultrakurzpuls-Laser (1)
- Ultrashort PFAS (1)
- Ultrashort laser processing (1)
- Ultrastructure (1)
- Umweltbewertung (1)
- Umweltmessung (1)
- Ungleichgewicht (1)
- Unterirdische Speicher (1)
- Up-cycling (1)
- UpConversion (1)
- Upscaling (1)
- Uranium (1)
- Uranium mining (1)
- Urban mining (1)
- Ureolytic bacteria (1)
- Utilisation (1)
- Utilization (1)
- VAMAS (1)
- VIS- Spektroskopie (1)
- VOC Emission (1)
- VOC emission (1)
- VOC transfer standards (1)
- Validation trial (1)
- Vasari (1)
- Vegetationsversuche (1)
- Velocimetry (1)
- Vererbung (1)
- Vergleichende Linguistik (1)
- Versuchskampagne (1)
- Verwertung Bodenmaterial (1)
- Vienna manuscript (1)
- Viruses (1)
- Vitrine (1)
- Vitriolic iron-gall inks (1)
- Volatile organic compound (1)
- Volatile organic compounds (VOC) (1)
- Vorsorgewerte (1)
- Vues des Cordillères (1)
- WKI flask method (1)
- Wasserbau (1)
- Wasserstofflagerung (1)
- Wasserstoffplasma (1)
- Waste (1)
- Waste incineration (1)
- Waste water (1)
- Waste water treatment (1)
- Water (1)
- Water analysis (1)
- Water atmosphere (1)
- Water contact (1)
- Water stable isotope analysis (1)
- Water uptake (1)
- Weathering tests (1)
- Weld fatigue (1)
- Weld toe geometry (1)
- Wet-mechanical treatment (1)
- White-rot fungi (1)
- Wiederholbarkeit (1)
- Wiederverwertung (1)
- Wirksamkeit (1)
- Wood Modification (1)
- Wood ash (1)
- Wood samples (1)
- Workflows (1)
- Writing Ink (1)
- Writing materials (1)
- Wärmedämmverbundsystem (1)
- X-Ray analysis (1)
- X-Ray flourescence spectroscopy (1)
- X-Ray fluorescence (1)
- X-ray based techniques (1)
- X-ray diffraction (XRD) (1)
- X-ray fuorescence (1)
- X-ray spectroscopic techniques (1)
- X-ray spectroscopy (1)
- X-ray tomographic (1)
- X-rays (1)
- XANES-Spektroskopie (1)
- XRF Analysis (1)
- XRF imaging (1)
- XRF ink analysis (1)
- XRF-, FTIR-, VIS-espectroscopía (1)
- XRF-, VIS- FTIR-spectroscopy (1)
- XRF-, VIS- spectroscopy (1)
- Xestobium rufovillosum (1)
- Yeast (1)
- ZIF (1)
- ZIF-8 (1)
- Zearalenone (1)
- Zearalenone sulfate (1)
- Zeichnung (1)
- Zeichnungen (1)
- Zentrat (1)
- Zentrifugalsortierer (1)
- Zeolite (1)
- Zeolithe (1)
- Zertifikate (1)
- Zinc chloride (1)
- Zinc oxide (1)
- Zinnschlacken (1)
- a-zearalenol (1)
- biocide tolerance (1)
- black fungi (1)
- black fungus (1)
- carotenoids (1)
- disinfection (1)
- dsDAN monolayer (1)
- evolution (1)
- fertilizer (1)
- fs-laser processing (1)
- genomics (1)
- heterogeneity (1)
- historic inks (1)
- iChip (1)
- individual-based modelling (1)
- infrared spectroscopy (1)
- ink (1)
- light (1)
- mRNA-seq (1)
- microspectroscopy (1)
- multi scale testing (1)
- natural ventilation (1)
- openBIS (1)
- pH probe (1)
- pH sensor (1)
- papyrus (1)
- pigmentation (1)
- plant pathogen (1)
- qPCR (1)
- signaling (1)
- soil (1)
- thermochemische Behandlung (1)
- underexplored phyla (1)
- virulence (1)
- x-ray diffraction (1)
- Äquivalenzdurchmesser (1)
- Ökobilanz (1)
- Ökotoxtests (1)
- ‘Green’ pesticide (1)
Organisationseinheit der BAM
- 4 Material und Umwelt (1119)
- 4.1 Biologische Materialschädigung und Referenzorganismen (271)
- 4.3 Schadstofftransfer und Umwelttechnologien (245)
- 4.4 Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung (186)
- 4.2 Material-Mikrobiom Wechselwirkungen (172)
- 4.5 Kunst- und Kulturgutanalyse (162)
- 4.0 Abteilungsleitung und andere (128)
- 6 Materialchemie (90)
- 1 Analytische Chemie; Referenzmaterialien (75)
- 6.1 Oberflächen- und Dünnschichtanalyse (35)
Paper des Monats
- ja (18)
Here, we show that calcium sulfate dihydrate (gypsum) can be directly, rapidly and reversibly converted to calcium sulfate hemihydrate (bassanite) in high salinity solutions (brines). The optimum conditions for the efficient production of bassanite in a short time (<5 min) involve the use of brines with c(NaCl) > 4 M and maintaining a temperature, T > 80 °C. When the solution containing bassanite crystals is cooled down to around room temperature, eventually gypsum is formed. When the temperature is raised again to T > 80 °C, bassanite is rapidly re-precipitated. This contrasts with the better-known behaviour of the bassanite phase in low-salt environments. In low-salinity aqueous solutions, bassanite is considered to be metastable with respect to gypsum and anhydrite, and therefore gypsum-to-bassanite conversion does not occur in pure water. Interestingly, the high-salinity transformation of gypsum-to-bassanite has been reported by many authors and used in practice for several decades, although its very occurrence actually contradicts numerical thermodynamic predictions regarding solubility of calcium sulfate phases. By following the evolution of crystalline phases with in situ and time-resolved X-ray diffraction/scattering and Raman spectroscopy, we demonstrated that the phase stability in brines at elevated temperatures was inaccurately represented in the thermodynamic databases. Most notably for c(NaCl) > 4 M, and T > 80 °C gypsum becomes readily more soluble than bassanite, which induces the direct precipitation of the latter from gypsum. The fact that these transformations are controlled by the solution provides extensive opportunities for precise manipulation of crystal formation. Our experiments confirmed that bassanite remained the sole crystalline phase for many hours before reverting into gypsum. This property is extremely advantageous for practical processing and efficient crystal extraction in industrial scenarios.
Calcium sulfate hemihydrate (CaSO4ᐧ0.5H2O), also known as bassanite, has been used as a precursor to produce gypsum (dihydrate, CaSO4ᐧ2H2O) for various construction and decorative purposes since prehistoric times. The main route to obtain hemihydrate is a thermal treatment of gypsum at temperatures typically between 150 °C and 200 °C to remove some of the structural water.
In this contribution, we introduce (Fig. 1) a more efficient and sustainable method (T < 100 °C) that enables the direct, rapid, and reversibly conversion of gypsum to bassanite using reusable high salinity aqueous solutions (brines with c[NaCl] > 4 M). The optimum conditions for the efficientproduction of bassanite in a short time (< 5 min) involve the use of brines with c(NaCl) > 4 M and maintaining a temperature, T > 80 °C. When the solution containing bassanite crystals is cooled down to around room temperature, eventually gypsum is formed. When the temperature is raised again to T > 80 °C, bassanite is rapidly re-precipitated. This contrasts with the typical behaviour of the bassanite phase in low salt environments.
Traditionally, hemihydrate is obtained through a solid state thermal treatment because bassanite is considered to be metastable with respect to gypsum and anhydrite in aqueous solutions, and therefore gypsum-to-bassanite conversion should not occur in water. Its very occurrence actually contradicts numerical thermodynamic predictions regarding solubility of calcium sulfate phases. By following the evolution of crystalline phases with in situ and time-resolved X-ray diffraction/scattering and Raman spectroscopy, we demonstrated that the phase stability in brines at elevated temperatures is inaccurately represented in the thermodynamic databases. Most notably for c(NaCl) > 4 M, and T > 80 °C gypsum becomes readily more soluble than bassanite, which induces the direct precipitation of the latter from gypsum. The fact that these transformations are controlled by the solution provides extensive opportunities for precise manipulation of crystal formation. Our experiments confirmed that bassanite remained the sole crystalline structure for many hours before reverting into gypsum. This property is extremely advantageous for practical processing and efficient crystal extraction in industrial scenarios.
Aschen und Schlacken aus der thermischen Abfallbehandlung enthalten eine Vielzahl von Schwermetallverbindungen. Für Antimon, Chrom, Kupfer, Molybdän und Vanadium werden in der neuen Ersatzbaustoffverordnung (Bundesregierung, 2021) Eluatgrenzwerte für die Verwertung festgelegt. Aschen und Schlacken werden aus der Abfallverbrennungsanlage nass ausgetragen und vor einer Verwertung in der Regel mehrere Wochen gelagert. Dabei finden hydraulische Reaktionen statt und enthaltenes CaO wird zu einem Großteil in Calciumcarbonat umgewandelt. Während wässrige Eluate von frischen Aschen pH-Werte von 12 und höher aufweisen, sind die Eluate nach einigen Wochen weniger stark alkalisch. Die gemessenen Schwermetallkonzentrationen sind daher dann auch deutlich niedriger, mit Ausnahme von Antimon (Sb) und Vanadium (V). Hier steigen die Konzentration mit der Lagerungsdauer. Grund sind sinkende Konzentrationen von Ca-Ionen, die sonst zu einer Ausfällung von Antimonaten und Vanadaten führen. Zu hohe Eluatwerte von Sb und V können jedoch durch Sorption an Eisenoxidverbindungen gemindert werden. Dazu wurden Sorptionsexperimente mit verschiedenen Eisenoxidverbindungen durchgeführt.
Aschen und Schlacken aus der thermischen Abfallbehandlung enthalten eine Vielzahl von Schwermetallverbindungen. Für Antimon, Chrom, Kupfer, Molybdän und Vanadium werden in der neuen Ersatzbaustoffverordnung Eluatgrenzwerte für die Verwertung festgelegt. Aschen und Schlacken werden aus der Abfallverbrennungsanlage nass ausgetragen und vor einer Verwertung in der Regel mehrere Wochen gelagert. Dabei finden hydraulische Reaktionen statt und enthaltenes CaO wird zu einem Großteil in Calciumcarbonat umgewandelt. Während wässrige Eluate von frischen Aschen pH-Werte von 12 und höher aufweisen, sind die Eluate nach einigen Wochen weniger stark alkalisch. Die gemessenen Schwermetallkonzentrationen sind daher dann auch deutlich niedriger, mit Ausnahme von Antimon (Sb) und Vanadium (V). Hier steigen die Konzentration mit der Lagerungsdauer. Grund sind sinkende Konzentrationen von Ca-Ionen, die sonst zu einer Ausfällung von Antimonaten und Vanadaten führen. Zu hohe Eluatwerte von Sb und V können durch Sorption an Eisenoxidverbindungen gemindert werden. Als besonders wirkungsvoll hat sich Schwertmannit (Eisen-Oxyhydroxysulfat) erwiesen. Es entsteht durch Oxidation von pyrithaltigem Material durch Mikroorganismen und wird deshalb in Gebieten gefunden, in denen Braunkohle abgebaut wurde, z.B. in der Lausitz. Weitere untersuchte Eisenoxidverbindungen waren Hämatit und Schlämme aus der Abtrennung von Eisen und Mangan in Wasserwerken.
The Brazilian sugarcane industry produced around 173 million tons (Mt) of bagasse in 2018. Bagasse is a by-product of juice extraction for ethanol and sugar production and is combusted in order to generate power, producing up to 10 Mt of ash per year. This ash contains various concentrations of plant nutrients, which allow the ash to be used as a crop fertilizer. However, the concentration and extractability of phosphorus (P), an essential plant nutrient, are low in bagasse ash. To increase the P content, we co-gasified and co-combusted bagasse with P-rich chicken manure. The resulting ash was thermochemically post-treated with alkali additives (Na2SO4 and K2SO4) to increase the availability of P to plants. We aimed to: (i) investigate the effect of thermochemical post-treatment of co-gasification residue and co-combustion ash on P availability to soybeans, (ii) explore the potential of chemical extraction methods (citric acid, neutral ammonium citrate, formic acid, and Mehlich-I) and diffusive gradients in thin films (DGT) to predict the availability of P to soybeans, and (iii) identify the responsible P-phases using X-ray diffraction . We evaluated P availability to soybeans growing in Brazilian Oxisol soil in two independent greenhouse pot experiments. The positive effect of thermochemical treatment on P availability from gasification residue was confirmed through the observation of increased P uptake and biomass in soybean plants. These findings were confirmed by chemical extraction methods and DGT. The gasification residue contained whitlockite as its main P-bearing phase. Thermochemical post-treatment converted whitlockite into highly soluble CaNaPO4. In contrast, co-combustion ash already contained highly soluble Ca(Na,K)PO4 as its main P-bearing phase, making thermochemical post-treatment unnecessary for increasing P availability. In conclusion, increased extractability and availability of P for soybeans were closely connected to the formation of calcium alkali phosphate. Our findings indicate that this combined methodology allows for the prediction of P-fertilization effects of ash.
Spatial Period of Laser-Induced Surface Nanoripples on PET Determines Escherichia coli Repellence
(2021)
Bacterial adhesion and biofilm formation on surfaces are associated with persistent microbial contamination, biofouling, and the emergence of resistance, thus, calling for new strategies to impede bacterial surface colonization. Using ns-UV laser treatment (wavelength 248 nm and a pulse duration of 20 ns), laser-induced periodic surface structures (LIPSS) featuring different submicrometric periods ranging from ~210 to ~610 nm were processed on commercial poly(ethylene terephthalate) (PET) foils. Bacterial adhesion tests revealed that these nanorippled surfaces exhibit a repellence for E. coli that decisively depends on the spatial periods of the LIPSS with the strongest reduction (~91%) in cell adhesion observed for LIPSS periods of 214 nm. Although chemical and structural analyses indicated a moderate laser-induced surface oxidation, a significant influence on the bacterial adhesion was ruled out. Scanning electron microscopy and additional biofilm studies
using a pili-deficient E. coli TG1 strain revealed the role of extracellular appendages in the bacterial repellence observed here.
Throughout their life cycle—from production, via usage, through to disposal—materials and products interact with the environment (water, soil, air). At the same time, they are exposed to environmental influences and, through their emissions, have an impact on the environment, people, and health. Accelerated experimental testing processes can be used to predict the long-term environmental consequences of innovative products before these actually enter the environment.
The aim of this Special Issue of the journal Materials is to publish original research and review articles as well as short communications tackling the problem of reliable environmental measurement methods and reporting exemplary case studies.
The use of ashes from municipal solid waste incineration as secondary building materials is an important pillar for the circular economy in Germany. However, leaching of potential toxic elements from these materials must be at environmentally acceptable levels. Normally, a three-month ageing period immobilizes most hazardous heavy metals, but antimony (Sb) and vanadium (V) showed previously unusual leaching. In order to clarify the mechanisms, we analyzed the Sb and V species in various bottom and fly ashes from municipal waste incineration by XANES spectroscopy. Antimony oxidizes from Sb(+ III) species used as flame retardants in plastics to Sb(+ V) compounds during waste incineration. However, owing to the similarity of different Sb(+ V) compound in the Sb K- and L-edge XANES spectra, it was not possible to accurately identify an exact Sb(+ V) species. Moreover, V is mainly present as oxidation state + V compound in the analyzed ashes. However, the coarse and magnetic fraction of the bottom ashes contain larger amounts of V(+ III) and V(+ IV) compounds which might enter the waste incineration from vanadium carbide containing steel tools. Thus, Sb and V could be critical potential toxic elements in secondary building materials and long-term monitoring of the release should be taken into account in the future.
Previous research shows that analytical methods based on Diffusive Gradients in Thin films (DGT) provide very good correlations to the amount of bioavailable nutrients and pollutants in the environmental samples. However, these DGT results do not identify which compound of the specific element has the high bioavailability. Using various spectroscopic techniques (infrared, XANES and NMR spectroscopy) to analyze the dried DGT binding layers after deployment could allow us to determine the specific elements or compounds. Nutrients such as phosphorus and nitrogen are often, together with other elements, present as molecules in the environment. These ions are detectable and distinguishable by infrared and NMR spectroscopy, respectively. In addition, XANES spectroscopy allows for the specification of nutrients and pollutants (e.g. chromium) on the DGT binding layer. Furthermore, microspectroscopic techniques make it also possible to analyze compounds on the DGT binding layer with a lateral resolution down to 5 µm2. Therefore, species of elements and compounds of e.g. a spatial soil segment can be mapped and analyzed, providing valuable insight to understand the dynamics of nutrients and pollutants in the environment. Here we will present the advantages and limitations of this novel combination of techniques.
Scientific analysis based on spectroscopic methods provide essential information on the composition of colourants and binders in paintings. These results can be set in a historical context and help to confirm art historical interpretations. Proofs of certain pigments can be used for dating purposes and may reveal if the artist used not only local but also imported materials. A pilot study of two Chinese reverse glass paintings from the late 19th (Yingying and Hongniang) and early 20th centuries (The Archer) was performed using a multi-analytical approach including X-ray fluorescence (XRF), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and Raman spectroscopy. This approach allowed the identification of the pigments and the classification of the binding media. The results reveal a combined use of traditional Chinese and imported European materials. Several pigments like cinnabar, lead white, orpiment, carbon black and copper-arsenic green (probably emerald green) were found in both paintings; red lead, artificial ultramarine blue, Prussian blue and ochre appear in at least one of the paintings. The proof of limewash (calcite and small amounts of portlandite) as a backing layer in “Yingying and Hongniang” indicates that clamshell white was also used for reverse glass paintings. Drying oil was classified as a binding media in most areas of both paintings. However, the orange background of The Archer yielded prominent bands of both proteinaceous and fatty binder.
Die gemeinsame Forschungsstrategie der Bundesoberbehörden zur Nanotechnologie wurde 2016 veröffentlicht. Die darin enthaltenen Aufgaben wurden von den Bundesoberbehörden vielfältig bearbeitet. Diese Präsentation gibt einen Überblick über die Projekte, die von der BAM bis 2019 bearbeitet wurden/werden und sich in den Rahmen der Forschungsstrategie einordnen.
Der mitteleuropäische Mensch hält sich 80 – 90 % der Zeit in Innenräumen auf. Je nach Aktivität atmet er 10 – 20 m³ bzw. 12 - 24 kg Luft täglich, das ist weit mehr als das Doppelte der Summe an Essen und Trinken. Die technischen Voraussetzungen für die Bestimmung von Emissionen aus Bauprodukten in die Luft liegen vor – harmonisierte horizontale Prüfnorm EN 16516. Es dürften mittlerweile zig-tausende Emissionsdatensätze vorliegen. Defizite gibt es bei der Kennzeichnung zur Unterscheidung emissionsarmer und emissionsreicher Produkte, die bestehende CE-Kennzeichnung ist unvollständig, ersatzweise gibt es nationale Regelungen.
Gerade bei modernen, dichten Bauten mit geringem natürlichen Luftwechsel sind hohe Schadstoffkonzentrationen zu erwarten, wenn nicht emissionsarme Materialien und Produkte zum Einsatz kommen.
The intention of the presentation is to inspire a discussion on the needs and challenges for the digitalisation of SOPs. SOPs are available for the disciplines of physical-chemical characterisation, for toxicology, for environmental applications and for exposure applications. Furthermore the SOPs need to be integrated in the regulatory framework and need to be detailed enough for the digital processing. This is highlighted in this presentation.
UBA und BAM schlagen die Durchführung der Prüfkammermessungen bei 23 °C und 50% relativer Luftfeuchte, einer Beladung von 1,8 m²/m³ und einem Luftwechsel von 0,5 pro Stunde vor. Diese Parameter orientieren sich an der EN 16516, die als zukünftige „Referenznorm“ zu betrachten ist. Die Schmalflächenversiegelung ist auch zukünftig wie in der EN 717-1 beschrieben vorzunehmen. Nach 28 Tagen wird der Mittelwert einer Doppelbestimmung als Endkonzentration („entsprechend der Ausgleichskonzentration“) berechnet. Alternativ dazu kann die Prüfung vorzeitig abgebrochen werden, wenn an 5 Messtagen der Prüfung eine Formaldehydkonzentration von 0,1 ppm nicht überschritten wird.
Prüfungen nach der EN 717-1 sollen weiterhin gleichberechtigt möglich sein. Ergebnisse von Messungen, die nach der EN 717-1 ermittelt wurden, sind mit dem Faktor 2,0 zu multiplizieren.
Abgeleitete Verfahren wie z.B. das Gasanalyseverfahren sollen weiterhin möglich sein. Das Perforatorverfahren entfällt hier, da eine allgemeine für alle Holzwerkstoffe gültige Korrelationen nicht existiert.
Die entsprechenden Änderungen sind in der vom BMUB veröffentlichten „Bekanntmachung analytischer Verfahren für Probenahmen und Untersuchungen für die im Anhang der Chemikalien-Verbotsverordnung genannten Stoffe und Stoffgruppen“ entsprechend zu ändern.
Microbiologically influenced corrosion (MIC) is a highly unpredictable process involving a complex group of microorganisms, including sulfate-reducing bacteria and methanogens. Standard laboratory MIC testing using static serum bottle enrichments is an easy but limited method, offering poor resolution on the biomineralization process of corrosion products. An example of this is the presumed corrosion product siderite by corrosive methanogens (Mi-MIC). Previous publications reported siderite was the sole corrosion product of M. maripaludis using metal coupons incubated under stationary conditions.
However, the formation of siderite is closely related to the surrounding environmental conditions, i.e. pH, CO2 concentration, flow and temperature. Thus, siderite as the sole corrosion product of Mi-MIC remain inconclusive and questionable. To study Mi-MIC effectively, a novel versatile multiport flow-column corrosion monitoring system (MFC) was developed. MFC allows sectional corrosion rate determination under flow conditions using different types of material, inoculum and packing material. MFC offers great flexibility, ease of operation and accurate corrosion measurements that can be combined with many other techniques. Using MFC, we studied multiple strains of methanogens and compared it with sulfate-reducing bacteria under neutral and low pH conditions. It was revealed by MFC that corrosive methanogens have equally high corrosion potential as sulfate-reducing bacteria. Additionally, siderite is not the dominant nor sole corrosion product of Mi-MIC. Thus, effective corrosion monitoring and establishing standard laboratory practices, i.e. incorporating MFC as part of regular testing process, will provide deeper understanding of MIC. This will allow further microbial electrophysiology understandings, contributing to effective mitigation strategy development.
In this work, we characterise the performance of a Sharp optical aerosol sensor model GP2Y1010AU0F. The sensor was exposed to different environments: to a clean room, to a controlled atmosphere with known aerosol size distribution and to the ambient atmosphere on a busy city street. During the exposure, the output waveforms of the sensor pulses were digitised, saved and a following offline analysis enabled us to study the behaviour of the sensor pulse-by-pulse. A linear response of the sensor on number concentration of the monosized dispersed PSL particles was shown together with an almost linear dependence on particle diameters in the 0.4 to 4 micrometer range.
The gathered data about the sensor were used to predict its response to an ambient atmosphere, which was observed simultaneously with a calibrated optical particle counter.
Dem Fachbeirat Bodenuntersuchungen des BMBF/UBA wurden Ergebnisse aus BISp-Forschungsvorhaben zur Untersuchung der Stofffreisetzung aus Sportböden auf Kunststoffbasis sowie zur Modellierung des Schadstofftransfers auf dem Pfad Boden-Grundwasser vorgestellt. Dabei wurde auch auf die derzeitigen gesetzlichen Regelungen auf EU Ebene und die vorhandenen Anforderungen in der Normung eingegangen. Der verbliebene Forschungsbedarf wurde aufgezeigt und dabei auch die Problematik der Bildung von Mikroplastik im Zusammenhang mit Sportböden thematisiert.
Die Europäische Kommission präsentierte am 11. Dezember 2019 den European Green Deal, ein Konzept mit dem Ziel, bis zum Jahr 2050 als erster Kontinent Klimaneutralität zu erreichen. Mit Inkrafttreten der Verordnung (EU) 2021/1119 des Europäischen Parlaments und des Europäischen Rates am 29. Juli 2021 zur Schaffung des Rahmens für die Verwirklichung der Klimaneutralität („Europäisches Klimagesetz“), ist dieses, sowie das Ziel der Reduzierung der Nettotreibhausgasemissionen um mindestens 55 % bis 2030 in der Gesetzgebung der Europäischen Union verankert. Die Stahlindustrie in der Europäischen Union mit ca. 57 Mio. t Nettotreibhausgasemissionen im Jahr 2020, die annähernd 2 % der Emissionen der Europäischen Union ausmachen (Inklusive Energie: 127 Mio. t; 4 %), bekennt sich zur erheblichen Reduzierung der CO2-Emissionen bis zum Jahr 2030 und zum Erreichen der Klimaneutralität bis zum Jahr 2050. Als Schlüsselwege zur Verwirklichung dieser Zielstellung hat sie zum einen Smart Carbon Usage (SCU) und zum anderen Carbon Direct Avoidance (CDA) in einer Roadmap formuliert. SCU umfasst CO2-reduzierende Maßnahmen in bestehenden Eisen- und Stahlproduktionsprozessen, Carbon Capture and Storage- (CCS) sowie Carbon Capture and Usage-Technologien (CCU). Wohingegen bei CDA CO2-Emissionen durch erneuerbare elektrische Energie sowie wasserstoffbasierte Reduktion des Eisenerzes gar nicht erst entstehen sollen. Der CDA-Weg, der voraussichtlich beschritten werden muss, um eine klimaneutrale Stahlproduktion zu erreichen [38], geht mit einer kostenintensiven Transformation der Stahlproduktion einher, die bereits von vielen Unternehmen der Stahlindustrie eingeleitet wurde und von der im Wesentlichen die beiden in Europa vorherrschenden Stahlproduktionsrouten Hochofen-Konverter-Route und Elektrolichtbogenofen-Route betroffen sind. Die CO2-Emissionen der Hochofen-Konverter-Route, von denen der überwiegende Anteil auf den Hochofen fällt, liegen laut einer für das Jahr 2015 erstellten Studie bei 1921 kg CO2/t Rohstahl inklusive der CO2-Last der Pellets als Einsatzmaterial sowie der Emissionen der nachgelagerten Stranggießanlagen und Walzwerke. Im Hochofen wird das Eisenerz durch Kohlenstoff (C) bzw. Kohlenstoffmonoxid (CO) – welche größtenteils aus dem Koks, der dem Hochofen zusammen mit dem Möller über die Gicht zugeführten wird, stammen – unter Entstehung von Roheisen und Kohlenstoffdioxid (CO2) reduziert. Das neben dem CO2 im Prozessgas enthaltene CO wird zum Beispiel zur Energiegewinnung in peripheren Prozessen ebenfalls unter Bildung von CO2 verbrannt. Zusätzlich zur Reduktion hat der Koks unter anderem physikalische Aufgaben, wie die Errichtung eines Stützgerüstes und die Gewährleistung der Permeabilität im Hochofenprozess. Somit ist eine vollkommene Substitution des Kokses zur Vermeidung der CO2-Emissionen im Hochofen nicht denkbar. Viele Strategien der Stahlunternehmen zum Erreichen der Klimaziele verfolgen daher den Wechsel von der Rohstahlproduktion aus der Hochofen-Konverter-Route hin zur Rohstahlproduktion im Elektrolichtbogenofen (EAF – Electric Arc Furnace) mit dem Einsatz von direkt reduziertem Eisen (Eisenschwamm, DRI – Direct Reduced Iron) aus vorgelagerten Direktreduktionsanlagen, die mit Wasserstoff (H2) als Reduktionsmittel betrieben werden können. Dabei ist die Elektrostahlerzeugung kein neuer Prozess und nimmt in der europäischen Union bereits jetzt einen Anteil von ca. 44 % der Rohstahlproduktion ein, jedoch überwiegend mit Schrott als Einsatzmaterial. Bei der Elektrostahlerzeugung mit Schrotteinsatz fallen laut der oben genannten Studie von Lüngen für das Jahr 20152 410 kg CO2-Emissionen pro Tonne Rohstahl an, von denen der Großteil auf die CO2-Last der fremd bezogenen elektrischen Energie zurückzuführen ist und daher nicht im Produktionsprozess selbst entsteht. Auch die Direktreduktion wird schon seit 1972 in der weltweit zweiten und bis heute in Westeuropa einzigen Direktreduktionsanlage in Hamburg betrieben. Während hier noch mit einem Reduktionsgas gearbeitet wird, das hauptsächlich aus einem aus Erdgas gewonnenen Wasserstoff-Kohlenstoffmonoxid-Gemisch besteht, liegt eine aktuelle Kernherausforderung in der Bereitstellung des in der Größenordnung der von der Transformation betroffenen Rohstahlproduktionskapazitäten notwendigen, mit erneuerbarer elektrischer Energie hergestellten Wasserstoffs. Wird zusätzlich der Strom für das Einschmelzen im Elektrolichtbogenofen aus erneuerbaren Quellen gewonnen und werden schließlich als Brennstoff verwendete Kohle und als Brennstoff verwendetes Erdgas durch CO2-neutrale Bio-Brennstoffe ersetzt, sind sowohl für den Einsatz von mit Wasserstoff reduziertem und auf Pellets ohne CO2-Last basiertem Eisenschwamm als auch für den Einsatz von Schrott CO2-Emissionen von jeweils nur 60 kg CO2/t Rohstahl erreichbar, was eine Reduktion der Emissionen, ausgehend von der Konverter-Hochofen-Route um 97 % und ausgehend von der Schrott-Elektrolichtbogenofen-Route um 85 % bedeuten würde.
Der Betrieb von Elektrolichtbogenöfen macht die an den Standorten vorhandenen Konverter sowie die Infrastruktur für Behandlung und Transport des Roheisens überflüssig. Die fortwährende Nutzung dieser bestehenden Anlagenstruktur dient daher unter anderem als Motivation für die Entwicklung einer zweiten Transformationsstrategie, die einen sogenannten Einschmelzer (SAF – Submerged Arc Furnace) als der Direktreduktionsanlage nachgelagerten Prozess vorsieht, in dem wiederum Roheisen erschmolzen wird, das anschließend im Konverter zu Rohstahl veredelt wird.
Die Transformation der Stahlindustrie beeinflusst einen weiteren CO2-intensiven Industriesektor, nämlich die Zementindustrie die verantwortlich ist für rund 4 % der CO2-Emissionen in der EU. Etwa zwei Drittel dieser Emissionen entfallen als Prozessemissionen auf die Entsäuerung des Rohstoffs Kalkstein (CaCO3), also auf die Abspaltung von CO2 unter Entstehung des für die Herstellung von Zementklinker notwendigen Branntkalks (CaO) als Zwischenstufe bei der Bildung der hydraulischen Phasen Tri- und Dicalciumsilikat. Als eines der fünf Themenfelder (5C-Ansatz: Clinker, Cement, Concrete, Construction, Carbonation), welche die europäische Zementindustrie entlang ihrer Wertschöpfungskette zum Erreichen der gesetzlichen Vorgaben der europäischen Union erarbeitet hat, umfasst das Feld "Cement" zum größten Teil die Reduzierung des Klinker-Zement-Faktors. Im Jahr 2017 betrug er 77 %, das heißt, dass 23 % des Klinkers durch alternative Materialien ersetzt wurden. Bis zum Jahr 2030 wird ein Faktor von 74 % und bis zum Jahr 2050 von 65 % angestrebt. Den größten Anteil an den Klinkersubstituten hat mit 33 % der Hüttensand aus der Stahlindustrie. Bei der Roheisenproduktion im Hochofen entsteht als Nebenprodukt Hochofenschlacke, die unter Zugabe von Schlackebildnern die Gangart des Möllers und mineralische Koksbestandteile abbindet, sowie weitere unerwünschte Begleitelemente wie Schwefel und Alkalien aufnimmt. Allein in Deutschland wurden im Jahr 2021 6,90 Mio. t – das entspricht 90 % der gesamten produzierten Hochofenschlacke – zu glasig erstarrtem Hüttensand granuliert. Dieser Hüttensand besitzt latent hydraulische Eigenschaften und wird daher seit mehr als 140 Jahren als Zementbestandteil eingesetzt, wodurch in Deutschland jährlich rund 4,5 Mio. t CO2-Emissionen eingespart werden. Alle Transformationsstrategien der Stahlindustrie beinhalten die notwendige Außerbetriebnahme der CO2-intensiven Hochöfen. Dies hat unter anderem zur Folge, dass die Hochofenschlacke als Nebenprodukt der Rohstahlerzeugung im Hochofen nicht mehr zur Verfügung stehen wird, wodurch die weitere Reduzierung des Klinker-Zement-Faktors erhebliche Zusatzmengen alternativer Materialien benötigen wird. Derzeit ist noch unklar, ob z.B. calcinierte Tone im benötigten Umfang erzeugt werden können.
Der Fachbereich Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung der Bundesanstalt für Materialforschung und -prüfung (BAM) und das Institut für Baustoffforschung FEhS forschen zusammen mit Industriepartnern und weiteren Forschungseinrichtungen im Rahmen zweier Projekte in den Kooperationssphären der Stahl- und Zementindustrie, die zur Bewältigung dieser Herausforderungen beitragen. Im Projekt SlagCEM wird die Produktion eines hydraulischen Zementbestandteils durch Reduktion von Konverter- bzw. Linz-Donawitz-Schlacke (LDS) untersucht. Die mit den zusätzlich aufgenommen Lichtbogenofenkapazitäten steigenden Mengen an Elektrolichtbogenofenschlacke (EOS, engl. electric arc furnace slag, EAFS) werden im Projekt DRI-EOS behandelt, welches die Produktion eines latent hydraulischen Hüttensandsubstituts zum Ziel hat.
Die Europäische Kommission präsentierte am 11. Dezember 2019 den European Green Deal, ein Konzept mit dem Ziel, bis zum Jahr 2050 als erster Kontinent Klimaneutralität zu erreichen. Mit Inkrafttreten der Verordnung (EU) 2021/1119 des Europäischen Parlaments und des Europäischen Rates am 29. Juli 2021 zur Schaffung des Rahmens für die Verwirklichung der Klimaneutralität („Europäisches Klimagesetz“), ist dieses, sowie das Ziel der Reduzierung der Nettotreibhausgasemissionen um mindestens 55 % bis 2030 in der Gesetzgebung der Europäischen Union verankert. Die Stahlindustrie in der Europäischen Union mit ca. 57 Mio. t Nettotreibhausgasemissionen im Jahr 2020, die annähernd 2 % der Emissionen der Europäischen Union ausmachen (Inklusive Energie: 127 Mio. t; 4 %), bekennt sich zur erheblichen Reduzierung der CO2-Emissionen bis zum Jahr 2030 und zum Erreichen der Klimaneutralität bis zum Jahr 2050. Als Schlüsselwege zur Verwirklichung dieser Zielstellung hat sie zum einen Smart Carbon Usage (SCU) und zum anderen Carbon Direct Avoidance (CDA) in einer Roadmap formuliert. SCU umfasst CO2-reduzierende Maßnahmen in bestehenden Eisen- und Stahlproduktionsprozessen, Carbon Capture and Storage- (CCS) sowie Carbon Capture and Usage-Technologien (CCU). Wohingegen bei CDA CO2-Emissionen durch erneuerbare elektrische Energie sowie wasserstoffbasierte Reduktion des Eisenerzes gar nicht erst entstehen sollen. Der CDA-Weg, der voraussichtlich beschritten werden muss, um eine klimaneutrale Stahlproduktion zu erreichen [38], geht mit einer kostenintensiven Transformation der Stahlproduktion einher, die bereits von vielen Unternehmen der Stahlindustrie eingeleitet wurde und von der im Wesentlichen die beiden in Europa vorherrschenden Stahlproduktionsrouten Hochofen-Konverter-Route und Elektrolichtbogenofen-Route betroffen sind. Die CO2-Emissionen der Hochofen-Konverter-Route, von denen der überwiegende Anteil auf den Hochofen fällt, liegen laut einer für das Jahr 2015 erstellten Studie bei 1921 kg CO2/t Rohstahl inklusive der CO2-Last der Pellets als Einsatzmaterial sowie der Emissionen der nachgelagerten Stranggießanlagen und Walzwerke. Im Hochofen wird das Eisenerz durch Kohlenstoff (C) bzw. Kohlenstoffmonoxid (CO) – welche größtenteils aus dem Koks, der dem Hochofen zusammen mit dem Möller über die Gicht zugeführten wird, stammen – unter Entstehung von Roheisen und Kohlenstoffdioxid (CO2) reduziert. Das neben dem CO2 im Prozessgas enthaltene CO wird zum Beispiel zur Energiegewinnung in peripheren Prozessen ebenfalls unter Bildung von CO2 verbrannt. Zusätzlich zur Reduktion hat der Koks unter anderem physikalische Aufgaben, wie die Errichtung eines Stützgerüstes und die Gewährleistung der Permeabilität im Hochofenprozess. Somit ist eine vollkommene Substitution des Kokses zur Vermeidung der CO2-Emissionen im Hochofen nicht denkbar. Viele Strategien der Stahlunternehmen zum Erreichen der Klimaziele verfolgen daher den Wechsel von der Rohstahlproduktion aus der Hochofen-Konverter-Route hin zur Rohstahlproduktion im Elektrolichtbogenofen (EAF – Electric Arc Furnace) mit dem Einsatz von direkt reduziertem Eisen (Eisenschwamm, DRI – Direct Reduced Iron) aus vorgelagerten Direktreduktionsanlagen, die mit Wasserstoff (H2) als Reduktionsmittel betrieben werden können. Dabei ist die Elektrostahlerzeugung kein neuer Prozess und nimmt in der europäischen Union bereits jetzt einen Anteil von ca. 44 % der Rohstahlproduktion ein, jedoch überwiegend mit Schrott als Einsatzmaterial. Bei der Elektrostahlerzeugung mit Schrotteinsatz fallen laut der oben genannten Studie von Lüngen für das Jahr 20152 410 kg CO2-Emissionen pro Tonne Rohstahl an, von denen der Großteil auf die CO2-Last der fremd bezogenen elektrischen Energie zurückzuführen ist und daher nicht im Produktionsprozess selbst entsteht. Auch die Direktreduktion wird schon seit 1972 in der weltweit zweiten und bis heute in Westeuropa einzigen Direktreduktionsanlage in Hamburg betrieben. Während hier noch mit einem Reduktionsgas gearbeitet wird, das hauptsächlich aus einem aus Erdgas gewonnenen Wasserstoff-Kohlenstoffmonoxid-Gemisch besteht, liegt eine aktuelle Kernherausforderung in der Bereitstellung des in der Größenordnung der von der Transformation betroffenen Rohstahlproduktionskapazitäten notwendigen, mit erneuerbarer elektrischer Energie hergestellten Wasserstoffs. Wird zusätzlich der Strom für das Einschmelzen im Elektrolichtbogenofen aus erneuerbaren Quellen gewonnen und werden schließlich als Brennstoff verwendete Kohle und als Brennstoff verwendetes Erdgas durch CO2-neutrale Bio-Brennstoffe ersetzt, sind sowohl für den Einsatz von mit Wasserstoff reduziertem und auf Pellets ohne CO2-Last basiertem Eisenschwamm als auch für den Einsatz von Schrott CO2-Emissionen von jeweils nur 60 kg CO2/t Rohstahl erreichbar, was eine Reduktion der Emissionen, ausgehend von der Konverter-Hochofen-Route um 97 % und ausgehend von der Schrott-Elektrolichtbogenofen-Route um 85 % bedeuten würde.
Der Betrieb von Elektrolichtbogenöfen macht die an den Standorten vorhandenen Konverter sowie die Infrastruktur für Behandlung und Transport des Roheisens überflüssig. Die fortwährende Nutzung dieser bestehenden Anlagenstruktur dient daher unter anderem als Motivation für die Entwicklung einer zweiten Transformationsstrategie, die einen sogenannten Einschmelzer (SAF – Submerged Arc Furnace) als der Direktreduktionsanlage nachgelagerten Prozess vorsieht, in dem wiederum Roheisen erschmolzen wird, das anschließend im Konverter zu Rohstahl veredelt wird.
Die Transformation der Stahlindustrie beeinflusst einen weiteren CO2-intensiven Industriesektor, nämlich die Zementindustrie die verantwortlich ist für rund 4 % der CO2-Emissionen in der EU. Etwa zwei Drittel dieser Emissionen entfallen als Prozessemissionen auf die Entsäuerung des Rohstoffs Kalkstein (CaCO3), also auf die Abspaltung von CO2 unter Entstehung des für die Herstellung von Zementklinker notwendigen Branntkalks (CaO) als Zwischenstufe bei der Bildung der hydraulischen Phasen Tri- und Dicalciumsilikat. Als eines der fünf Themenfelder (5C-Ansatz: Clinker, Cement, Concrete, Construction, Carbonation), welche die europäische Zementindustrie entlang ihrer Wertschöpfungskette zum Erreichen der gesetzlichen Vorgaben der europäischen Union erarbeitet hat, umfasst das Feld "Cement" zum größten Teil die Reduzierung des Klinker-Zement-Faktors. Im Jahr 2017 betrug er 77 %, das heißt, dass 23 % des Klinkers durch alternative Materialien ersetzt wurden. Bis zum Jahr 2030 wird ein Faktor von 74 % und bis zum Jahr 2050 von 65 % angestrebt. Den größten Anteil an den Klinkersubstituten hat mit 33 % der Hüttensand aus der Stahlindustrie. Bei der Roheisenproduktion im Hochofen entsteht als Nebenprodukt Hochofenschlacke, die unter Zugabe von Schlackebildnern die Gangart des Möllers und mineralische Koksbestandteile abbindet, sowie weitere unerwünschte Begleitelemente wie Schwefel und Alkalien aufnimmt. Allein in Deutschland wurden im Jahr 2021 6,90 Mio. t – das entspricht 90 % der gesamten produzierten Hochofenschlacke – zu glasig erstarrtem Hüttensand granuliert. Dieser Hüttensand besitzt latent hydraulische Eigenschaften und wird daher seit mehr als 140 Jahren als Zementbestandteil eingesetzt, wodurch in Deutschland jährlich rund 4,5 Mio. t CO2-Emissionen eingespart werden. Alle Transformationsstrategien der Stahlindustrie beinhalten die notwendige Außerbetriebnahme der CO2-intensiven Hochöfen. Dies hat unter anderem zur Folge, dass die Hochofenschlacke als Nebenprodukt der Rohstahlerzeugung im Hochofen nicht mehr zur Verfügung stehen wird, wodurch die weitere Reduzierung des Klinker-Zement-Faktors erhebliche Zusatzmengen alternativer Materialien benötigen wird. Derzeit ist noch unklar, ob z.B. calcinierte Tone im benötigten Umfang erzeugt werden können.
Der Fachbereich Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung der Bundesanstalt für Materialforschung und -prüfung (BAM) und das Institut für Baustoffforschung FEhS forschen zusammen mit Industriepartnern und weiteren Forschungseinrichtungen im Rahmen zweier Projekte in den Kooperationssphären der Stahl- und Zementindustrie, die zur Bewältigung dieser Herausforderungen beitragen. Im Projekt SlagCEM wird die Produktion eines hydraulischen Zementbestandteils durch Reduktion von Konverter- bzw. Linz-Donawitz-Schlacke (LDS) untersucht. Die mit den zusätzlich aufgenommen Lichtbogenofenkapazitäten steigenden Mengen an Elektrolichtbogenofenschlacke (EOS, engl. electric arc furnace slag, EAFS) werden im Projekt DRI-EOS behandelt, welches die Produktion eines latent hydraulischen Hüttensandsubstituts zum Ziel hat.
Populations of genetically identical cells can display marked variation in phenotypic traits; such variation is termed phenotypic heterogeneity. Here, we investigate the effect of substrate and electron donor limitation on phenotypic heterogeneity in N2 and CO2 fixation in the green sulphur bacterium Chlorobium phaeobacteroides. We grew populations in chemostats and batch cultures and used stable isotope labelling combined with nanometer‐scale secondary ion mass spectrometry (NanoSIMS) to quantify phenotypic heterogeneity. Experiments in H2S (i.e. electron donor) limited chemostats show that varying levels of NH4+ limitation induce heterogeneity in N2 fixation. Comparison of phenotypic heterogeneity between chemostats and batch (unlimited for H2S) populations indicates that electron donor limitation drives heterogeneity in N2 and CO2 fixation. Our results demonstrate that phenotypic heterogeneity in a certain metabolic activity can be driven by different modes of limitation and that heterogeneity can emerge in different metabolic processes upon the same mode of limitation. In conclusion, our data suggest that limitation is a general driver of phenotypic heterogeneity in microbial populations.
Sugarcane bagasse is commonly combusted to generate energy. Unfortunately, recycling strategies rarely consider the resulting ash as a potential fertilizer. To evaluate this recycling strategy for a sustainable circular economy, we characterized bagasse ash as a fertilizer and measured the effects of co-gasification and co-combustion of bagasse with either chicken manure or sewage sludge: on the phosphorus (P) mass fraction, P-extractability, and mineral P phases. Furthermore, we investigated the ashes as fertilizer for soybeans under greenhouse conditions. All methods in combination are reliable indicators helping to assess and predict P availability from ashes to soybeans. The fertilizer efficiency of pure bagasse ash increased with the ash amount supplied to the substrate. Nevertheless, it was not as effective as fertilization with triple-superphosphate and K<sub>2</sub>SO<sub>4</sub>, which we attributed to lower P availability. Co-gasification and co-combustion increased the P mass fraction in all bagasse-based ashes, but its extractability and availability to soybeans increased only when co-processed with chicken manure, because it enabled the formation of readily available Ca-alkali phosphates. Therefore, we recommend co-combusting biomass with alkali-rich residues to increase the availability of P from the ash to plants.
The suitability of common analytical methods for the determination of active substances from wood preservatives in aged wood samples was investigated during an interlaboratory study. Permethrin, propiconazole and tebuconazole were quantified in 1.5 and 8 year-old wood samples by gas chromatography and liquid chromatography. Generally, the applied Methods yielded reliable results for these samples. However, wood components can coelute with propiconazole and tebuconazole during liquid chromatography. Optimization of separation might be required if UV detection is applied.
The XPS information depth of approximately 10 nm is in the same size range as the outer membrane of the gram-negative bacteria, which makes XPS a suitable tool for determining the elemental composition of the bacterial surface and monitor changes caused by outer stress like dehydration or exposure to antimicrobials. However, bacteria are inherently in a hydrated state, and therefore only compatible to ultra-high vacuum after extensive sample preparation, which may degrade the sample constituents. This issue is addressed by the development of near-ambient pressure (NAP)-XPS, which enables bacteria and biofilms to be characterised in their native wet state. Artificial biofilms, bacteria and biofilms of Escherichia coli have been characterised with the laboratory NAP-XPS instrument EnviroESCA from SPECS GmbH, at pressures ranging from high vacuum to 12 mbar, and in both humid and dry environment. By studying biological samples in their native wet state, new insight about composition and transport of drugs through cell membranes and the extracellular polymeric substance (EPS) of biofilms can be obtained. In this contribution, the latest progress on biofilm characterisation by NAP-XPS will be presented, and measurement capabilities and limitations will be discussed.
Surface characterisation of biofilms by nearambient pressure X-ray photoelectron spectroscopy
(2018)
The XPS information depth of approximately 10 nm is in the same size range as the outer membrane of the gram-negative bacteria, which makes XPS a suitable tool for determining the elemental composition of the bacterial surface and monitor changes caused by outer stress like dehydration or exposure to antimicrobials. However, bacteria are inherently in a hydrated state, and therefore only compatible to ultra-high vacuum after extensive sample preparation, which may degrade the sample constituents. This issue is addressed by the development of near-ambient pressure (NAP)-XPS, which enables bacteria and biofilms to be characterised in their native wet state. Artificial biofilms, bacteria and biofilms of Escherichia coli have been characterised with the laboratory NAP-XPS instrument EnviroESCA from SPECS GmbH, at pressures ranging from high vacuum to 12 mbar, and in both humid and dry environment. By studying biological samples in their native wet state, new insight about composition and transport of drugs through cell membranes and the extracellular polymeric substance (EPS) of biofilms can be obtained.
A presentation held for the seminar "Ausgewählte analytische Methoden der Physik" hosted by Prof. Birgit Kanngießer at TU Berlin. The first part focus on depth-dependent XPS-measurements (XPS, synchrotron HAXPES) to obtain a concentration profile of iodine in an artificial biofilm. In the second part, NAP-XPS measurements of various bacterial samples are presented.
Surface characterisation of Escherichia coli under various conditions by near-ambient pressure XPS
(2018)
Bacteria are inherently in a hydrated state and therefore not compatible to ultra-high vacuum techniques such as XPS without prior sample preparation involving freeze drying or fast freezing.
This has changed with the development of near-ambient pressure (NAP)-XPS, which makes it possible to characterise the bacterial surface with minimal sample preparation. This paper presents NAP-XPS measurements of Escherichia coli under various NAP conditions: at 11 mbar in a humid environment, at 2 mbar after drying in the chamber, pre-dried at 4 mbar, and at 1 mbar after overnight pumping at 10^−4 mbar. The high-resolution spectra of carbon, nitrogen, and oxygen are presented and found to be in general agreement with XPS measurements from freeze-dried and fast-frozen bacteria. However, it was found that the amount of carbon components associated with polysaccharides increases relative to aliphatic carbon during drying and increases further after overnight pumping. This implies that drying has an impact on the bacterial surface.
Chemical modification of wood applying benzotriazolyl-activated carboxylic acids has proven to be a versatile method for the durable functionalization of its lignocellulosic biopolymers. Through this process, the material properties of Wood can be influenced and specifically optimized. To check the scope and limitations of this modification method, various benzamide derivatives with electron-withdrawing (EWG) or electron-donating (EDG) functional groups in different positions of the aromatic ring were synthesized and applied for covalent modification of Scots pine (Pinus sylvestris L.) sapwood in this study. The bonded amounts of substances (up to 2.20 mmol) were compared with the reactivity constants of the Hammett equation, revealing a significant correlation between the modification efficiency and the theoretical reactivity constants of the corresponding aromatic substitution pattern. The successful covalent attachment of the respective substituted benzamides was proven by attenuated total reflection infrared (ATR-IR) spectroscopy, while the stability of the newly formed ester bond was proven in a standardized leaching test.
Sustainability has become the conscientious and future-oriented principle of modern resource management and environmental protection because caring for the future is tantamount to providing manageable and healthy surroundings for ourselves. For the foreseeable future, geotechnical and environmental engineers must therefore be concerned with ensuring a healthy balance between extraction, processing, manufacturing, utilization, recycling, and disposal of materials and products.
Since it was realized that sites contaminated with metals and radionuclides needed treatment, various remediation methods have been and are being developed. Depending on the size of the contaminated site and urgency of intervention, conventional or recently introduced techniques have been used. Conventional techniques include excavation and removal for treatment of soil and contaminants, or the so-called “pump-and-treat” method, in which contaminated groundwater is removed from the ground by pumping and treated in a treatment plant on the surface. It has the advantage of using proven techniques and is easy to control, and the treated groundwater can be reinjected into the ground or discharged in rivers or lakes. Novel methods include permeable reactive barriers, biomineralization, and electrokinetic remediation.
Basic oxygen furnace slags (BOFS) are by-products of the steelmaking process. Several researchers have studied the production of Portland cement clinker and metallic iron from BOFS via a reductive treatment.
In this study, we applied a carbothermal reduction of BOFS in a technical-scale electric arc furnace and characterised the clinker-like products. Those clinker-like non-metallic products (NMPs) had a chemical and mineralogical composition comparable to clinker for ordinary Portland cement (OPC) and contained large elongated alite crystals as major component. The pure NMPs reacted more slowly and achieved a lower degree of hydration compared with commercial OPC.
If the reactivity of the products can be further increased by employing specific adaptations, it can be used as a full clinker substitute for OPC. Nevertheless, it is also an option to use the material without further modifications as a cement component or concrete addition, which contributes to the strength development in both cases.
The pressing need for novel bioproduction approaches faces a limitation in the number and type of molecules accessed through synthetic biology. Halogenation is widely used for tuning physicochemical properties of molecules and polymers, but traditional halogenation chemistry often lacks specificity and generates harmful by-products. Here, we pose that deploying synthetic metabolism tailored for biohalogenation represents an unique opportunity towards economically attractive and environmentally friendly organohalide production. On this background, we discuss growth-coupled selection of functional metabolic modules that harness the rich repertoire of biosynthetic and biodegradation capabilities of environmental bacteria for in vivo biohalogenation. By rationally combining these approaches, the chemical landscape of Living cells can accommodate bioproduction of added-value organohalides which, as of today, are obtained by traditional chemistry.
The diversity of fused filament fabrication (FFF) filaments continues to grow rapidly as the popularity of FFF-3D desktop printers for the use as home fabrication devices has been greatly increased in the past decade. Potential harmful emissions and associated health risks when operating indoors have induced many emission studies. However, the lack of standardization of measurements impeded an objectifiable comparison of research findings. Therefore, we designed a chamber-based standard method, i.e., the strand printing method (SPM), which provides a standardized printing procedure and quantifies systematically the particle emission released from individual FFF-3D filaments under controlled conditions. Forty-four marketable filament products were tested. The total number of emitted particles (TP) varied by approximately four orders of magnitude (1E9 ≤ TP ≤ 1E13), indicating that origin of polymers, manufacturer-specific additives, and undeclared impurities have a strong influence. Our results suggest that TP characterizes an individual filament product and particle emissions cannot be categorized by the polymer type (e.g., PLA or ABS) alone. The user's choice of a filament product is therefore decisive for the exposure to released particles during operation. Thus, choosing a filament product awarded for low emissions seems to be an easily achievable preemptive measure to prevent health hazards.
Based on recently published research on leaching control mechanisms in electric arc furnace (EAF) slags, it is assumed that a FeO/SiO2 ratio of around one leads to low leached V and Cr concentrations. This ratio influences the mineral phase composition of the slag toward higher amounts of spinel and a lower solubility of calcium silicate phases by suppressing the formation of magnesiowuestite and highly soluble calcium silicate phases. To evaluate this hypothesis, laboratory and scaled up tests in an EAF pilot plant were performed on slag samples characterized by elevated V and Cr leaching and a high FeO/SiO2 ratio. Prior to the melting experiments, the optimum FeO/SiO2 ratio was calculated via FactSageTM. In the melting experiments, the ratio was adjusted by adding quartz sand, which also decreased the basicity (CaO/SiO2) of the slag. As a reference, remelting experiments without quartz sand addition were conducted and additionally, the influence of the cooling rate of the slag was examined. The remelted (without quartz sand) and the remelted modified slags (with quartz sand) were analyzed chemically and mineralogically and the leaching behavior was investigated. The modification of the slags yielded a minimized release of V and Cr, supporting the hypothesis that the FeO/SiO2 ratio influences the mineralogy and the leaching behavior.
Based on recently published research on leaching control mechanisms in electric arc furnace (EAF) slags, it is assumed that a FeO/SiO2 ratio of around one leads to low leached V and Cr concentrations. This ratio influences the mineral phase composition of the slag toward higher amounts of spinel and a lower solubility of calcium silicate phases by suppressing the formation of magnesiowuestite and highly soluble calcium silicate phases. To evaluate this hypothesis, laboratory and scaled up tests in an EAF pilot plant were performed on slag samples characterized by elevated V and Cr leaching and a high FeO/SiO2 ratio. Prior to the melting experiments, the optimum FeO/SiO2 ratio was calculated via FactSageTM. In the melting experiments, the ratio was adjusted by adding quartz sand, which also decreased the basicity (CaO/SiO2) of the slag. As a reference, remelting experiments without quartz sand addition were conducted and additionally, the influence of the cooling rate of the slag was examined. The remelted (without quartz sand) and the remelted modified slags (with quartz sand) were analyzed chemically and mineralogically and the leaching behavior was investigated. The modification of the slags yielded a minimized release of V and Cr, supporting the hypothesis that the FeO/SiO2 ratio influences the mineralogy and the leaching behavior.
For the first time, µ-X-ray fluorescence (µ-XRF) mapping combined with fluorine K-edge µ-X-ray absorption near-edge structure (µ-XANES) spectroscopy was applied to depict per- and polyfluoroalkyl substances (PFAS) contamination and inorganic fluoride in samples concentrations down to 100 µg/kg fluoride. To demonstrate the matrix tolerance of the method, several PFAS contaminated soil and sludge samples as well as selected consumer product samples (textiles, food contact paper and permanent baking sheet) were investigated. µ-XRF mapping allows for a unique element-specific visualisation at the sample surface and enables localisation of fluorine containing compounds to a depth of 1 µm. Manually selected fluorine rich spots were subsequently analysed via fluorine K-edge µ-XANES spectroscopy. To support spectral interpretation with respect to inorganic and organic chemical distribution and compound class determination, linear combination (LC) fitting was applied to all recorded µ-XANES spectra. Complementarily, solvent extracts of all samples were target-analysed via LC-MS/MS spectrometry. The detected PFAS sum values range from 20 to 1136 µg/kg dry weight (dw). All environmentally exposed samples revealed higher concentration of PFAS with a chain length >C8 (e.g. 580 µg/kg dw PFOS for Soil1), whereas the consumer product samples showed a more uniform distribution with regard to chain lengths from C4 to C8. Independent from quantified PFAS amounts via target analysis, µ-XRF mapping combined with µ-XANES spectroscopy was successfully applied to detect both point-specific concentration maxima and evenly distributed surface coatings of fluorinated organic contaminants in the corresponding samples.
The halophilic bacterium Halomonas elongata can tolerate salt concentrations above 10% NaCl and uses the accumulation of the compatible solute ectoine as a major osmoregulatory mechanism. Ectoine can be accumalted inside the cell through import from the medium or de novo synthesis and establishes an osmotic equilibrium with the surrounding1. Ectoine also protects proteins from the effects of freezing, drying and high temperatures4 and DNA from ionizing radiation2. These features make ectoine a valuable compound for cosmetics and medical devices.
H. elongata was originally isolated from a solar salt facility, where it thrives under high salt concentrations. It was found that marine prokaryotes, which are exposed to high oxidative stress in their environment, vary glycolytic strategies5. A variation in the use of the glucose metabolic pathways is also assumed for H. elongata.
Since the recycling of tantalum bearing post-consumer waste is practically not existent, metallurgical residues are the most important feed for the tantalum recycling. Most tin ores naturally contain significant quantities of refractory metals. During the smelting process in primary tin production these elements are enriched in the slag phase. This slag is a highly valuable raw material for tantalum production due to its considerable concentration of tantalum and its functioning as an additional slag former in further pyrometallurgical treatment.
In this paper the first process stage of an existing pyrometallurgical process for tantalum recovery, mainly from low grade pyrometallurgical residues, is discussed. Smelting trials were carried out in a pilot-scale electric arc furnace to analyse the effect of feeding on the activity of carbon as a reducing agent. Therefore, blowing petroleum coke through an iron lance and the manual adding of coke into the melting bath were tested. During the pyrometallurgical treatment elements with a high affinity to carbon were reduced to their carbide form and enriched in the molten iron-based metal phase. The objective of the process was to reduce the oxidic tantalum completely and to enrich it into the metal phase. Furthermore, the transfer of unwanted elements such as titanium into the metal phase was aimed to be avoided.
Spoon test specimens were taken from the liquid mineral melt to follow the evolution of the reduction process. The cooled down solidified melting bath was investigated by using the XRD and EDX method to characterise the slag system and to identify relevant mineral phases.
Since the recycling of tantalum bearing post-consumer waste is practically not existent, metallurgical residues are the most important feed for the tantalum recycling. Most tin ores naturally contain significant quantities of refractory metals. During the smelting process in primary tin production these elements are enriched in the slag phase. This slag is a highly valuable raw material for tantalum production due to its considerable concentration of tantalum and its functioning as an additional slag former in further pyrometallurgical treatment.
In this paper the first process stage of an existing pyrometallurgical process for tantalum recovery, mainly from low grade pyrometallurgical residues, is discussed. Smelting trials were carried out in a pilot-scale electric arc furnace to analyse the effect of feeding on the activity of carbon as a reducing agent. Therefore, blowing petroleum coke through an iron lance and the manual adding of coke into the melting bath were tested. During the pyrometallurgical treatment elements with a high affinity to carbon were reduced to their carbide form and enriched in the molten iron-based metal phase. The objective of the process was to reduce the oxidic tantalum completely and to enrich it into the metal phase. Furthermore, the transfer of unwanted elements such as titanium into the metal phase was aimed to be avoided.
Spoon test specimens were taken from the liquid mineral melt to follow the evolution of the reduction process. The cooled down solidified melting bath was investigated by using the XRD and EDX method to characterise the slag system and to identify relevant mineral phases.
Gegenstand dieser Arbeit ist die Untersuchung eines bestehenden pyrometallurgischen Prozesses zur Rückgewinnung von Tantal und Niob aus metallurgischen Reststoffen mit vorwiegend niedriger Wertstoffkonzentration.
Zur näheren Erforschung der im vorliegenden Stoffsystem ablaufenden Reduktionsprozesse wurden in einem Elektrolichtbogenofen Schmelzversuche im Pilotmaßstab durchgeführt. Als Reduktionsmittel diente Koks, welcher mithilfe einer Argon-gespülten Eisenlanze in die flüssige mineralische Schmelze eingebracht wurde. Während der Reduktionsbehandlung werden Refraktärmetalle wie Tantal und Niob in ihre Carbide überführt und anschließend in der erschmolzenen eisenbasierten Metallphase am Boden des Reaktors angereichert. Neben Tantal und Niob gelangt auch ein Teil des im Einsatzmaterial enthaltenen Titans als unerwünschtes Begleitelement in die Metallphase.
Sein Großteil verbleibt jedoch als Oxid in der Schlacke und wird dort hauptsächlich im Mineral Perowskit (CaTiO3) gebunden. Die erstarrten Schlackeproben wurden mit verschiedenen Methoden wie Röntgenfluoreszensanalyse, Röntgenbeugung und Rasterelektronenmikroskopie mit gekoppelter energiedispersiver Röntgenanalyse untersucht, um die Bildung tantalhaltiger Mineralphasen zu verschiedenen Stadien des Reduktionsprozesses zu verfolgen.
Die hier gewonnenen Erkenntnisse zeigen, dass weniger die durch das Einblasen von Koks verursachte Reduktionsreaktion, sondern das Absinken der tantalreichen Eisentröpfchen in der flüssigen mineralischen Schmelze, gefolgt von ihrer Anreicherung in die Metallphase, für die Kinetik ausschlaggebend ist.
Recent DNA-based studies have shown that the built environment is surprisingly rich in fungi. These indoor fungi – whether transient visitors or more persistent residents – may hold clues to the rising levels of human allergies and other medical and building-related health problems observed globally. The taxo¬nomic identity of these fungi is crucial in such pursuits. Molecular identification of the built mycobiome is no trivial undertaking, however, given the large number of unidentified, misidentified, and technically compromised fungal sequences in public sequence databases. In addition, the sequence metadata required to make informed taxonomic decisions – such as country and host/substrate of collection – are often lacking even from reference and ex-type sequences. Here we report on a taxonomic annotation workshop (April 10–11, 2017) organized at the James Hutton Institute/University of Aberdeen (UK) to facilitate reproducible studies of the built mycobiome. The 32 participants went through public fungal ITS bar¬code sequences related to the built mycobiome for taxonomic and nomenclatural correctness, technical quality, and metadata availability. A total of 19,508 changes – including 4,783 name changes, 14,121 metadata annotations, and the removal of 99 technically compromised sequences – were implemented in the UNITE database for molecular identification of fungi (https://unite.ut.ee/) and shared with a range of other databases and downstream resources. Among the genera that saw the largest number of changes were Penicillium, Talaromyces, Cladosporium, Acremonium, and Alternaria, all of them of significant importance in both culture-based and culture-independent surveys of the built environment.
Bei der Stahlproduktion fallen verfahrensbedingt große Mengen an Nebenprodukten und Abfällen wie Stahlwerksschlacken, Filterstäube und Gichtgasschlämme an. Hohe Anteile dieser Stoffströme werden aufgrund ihrer Zusammensetzung immer noch deponiert, obwohl sie ein hohes Wertstoffpotential aufweisen. An der Bundesanstalt für Materialforschung und -prüfung (BAM) werden Verfahren untersucht
und entwickelt, welche eine Verwertung und Kreislaufführung dieser Materialströme ermöglichen. Aus sogenannten Linz-Donawitz-(LD)-Schlacken können durch carbothermische Nachbehandlung Roheisen und ein dem Portlandzementklinker (PZK) ähnliches Bindemittel erzeugt werden. Aus Elektroofenstäuben und Gichtgasschlämmen kann Zink gewonnen und die Anteile an Eisen und Kohlenstoff in den Stahlproduktionsprozess zurückgeführt werden. Durch diese technischen Maßnahmen kann es gelingen die Deponierung von Abfällen der Stahlproduktion zukünftig deutlich zu reduzieren.
Bei der Stahlproduktion fallen verfahrensbedingt große Mengen an Nebenprodukten und Abfällen wie Stahlwerksschlacken, Filterstäube und Gichtgasschlämme an. Hohe Anteile dieser Stoffströme werden aufgrund ihrer Zusammensetzung immer noch deponiert, obwohl sie ein hohes Wertstoffpotential aufweisen. An der Bundesanstalt für Materialforschung und -prüfung (BAM) werden Verfahren untersucht und entwickelt, welche eine Verwertung und Kreislaufführung dieser Materialströme ermöglichen. Aus sogenannten Linz-Donawitz-(LD)-Schlacken können durch carbothermische Nachbehandlung Roheisen und ein dem Portlandzementklinker (PZK) ähnliches Bindemittel erzeugt werden. Aus Elektroofenstäuben und Gichtgasschlämmen kann Zink gewonnen und die Anteile an Eisen und Kohlenstoff in den Stahlproduktionsprozess zurückgeführt werden. Durch diese technischen Maßnahmen kann es gelingen die Deponierung von Abfällen der Stahlproduktion zukünftig deutlich zu reduzieren.
Fluorides are well-known as wood preservatives. One of the limitations of fluoride-based wood preservatives is their high leachability. Alternative to current fluoride salts such as NaF used in wood protection are low water-soluble fluorides. However, impregnation of low water-soluble fluorides into wood poses a challenge. To address this challenge, low water-soluble fluorides like calcium fluoride (CaF2) and magnesium fluoride (MgF2) were synthesized as nanoparticles via the fluorolytic sol−gel synthesis and then impregnated into wood specimens. In this study, the toxicity of nano metal fluorides was assessed by termite mortality, mass loss and visual analysis of treated specimens after eight weeks of exposure to termites, Coptotermes formosanus. Nano metal fluorides with sol concentrations of 0.5 M and higher were found to be effective against termites resulting in 100% termite mortality and significantly inhibited termite feeding. Among the formulations tested, the least damage was found for specimens treated with combinations of CaF2 and MgF2 with an average mass loss less than 1% and visual rating of “1”. These results demonstrate the efficacy of low water-soluble nano metal fluorides to protect Wood from termite attack.
Fluorides are well-known as wood preservatives. One of the limitations of fluoride-based wood preservatives is their high leachability. Alternative to current fluoride salts such as NaF used in wood protection are low water-soluble fluorides. However, impregnation of low water-soluble fluorides into wood poses a challenge. To address this challenge, low water-soluble fluorides like calcium fluoride (CaF2) and magnesium fluoride (MgF2) were synthesized as nanoparticles via the fluorolytic sol−gel synthesis and then impregnated into wood specimens. In this study, the toxicity of nano metal fluorides was assessed by termite mortality, mass loss and visual analysis of treated specimens after eight weeks of exposure to termites, Coptotermes formosanus. Nano metal fluorides with sol concentrations of 0.5 M and higher were found to be effective against termites resulting in 100% termite mortality and significantly inhibited termite feeding. Among the formulations tested, the least damage was found for specimens treated with combinations of CaF2 and MgF2 with an average mass loss less than 1% and visual rating of “1”. These results demonstrate the efficacy of low water-soluble nano metal fluorides to protect wood from termite attack.
The importance of soldiers to termite Society defence has long been recognized, but the contribution of soldiers to other societal functions, such as colony immunity, is less well understood.
We explore this issue by examining the role of soldiers in protecting nestmates against pathogen infection. Even though they are unable to engage in grooming behaviour, we find that the presence of soldiers of the Darwin termite, Mastotermes darwiniensis, significantly improves the survival of nestmates following entomopathogenic infection.
We also show that the copious exocrine oral secretions produced by Darwin termite soldiers contain a high concentration of Proteins involved in digestion, chemical biosynthesis, and immunity. The oral secretions produced by soldiers are sufficient to protect nestmates against infection, and they have potent inhibitory activity against a broad spectrum of microbes. Our findings support the view that soldiers may play an important role in colony immunity, and broaden our understanding of the possible function of soldiers during the origin of soldier-first societies.
Rare occurrences of termites in Germany. Termites are typical elements of the tropical and subtropical insect fauna. In Europe, their most northern natural range is southern France, Italy and the South-Balkan region. Only occasionally are termites found in Germany. Their occurrence is always very closely associated with the synanthropic environment. Drywood termites like Cryptotermes brevis or Kalotermis flavicollis were accidentally imported with furniture, wooden artefacts or plant material into homes or indoor arboretums. Similar pathways of termite introduction are described for Coptotermes gestroi and Reticulitermes sp. into tropical botanical gardens and tropical theme parks. Although termites were introduced to Germany several times, successful spreading or long term establishment never occurred due to climatic barriers, namely cold winter temperatures. Only Reticulitermes flavipes formed sustainable colonies in the city of Hamburg for several decades. Originating from the eastern United States of America, this species was introduced in the 1930s with infested wood through the sea port. Small subterranean colonies could survive the winter in areas where pipes of the central heating system kept the ground from freezing. Control efforts of this potentially invasive species of economic importance started early on but failed until modern bait techniques were applied in the year 2000. Currently, termites have not been detected in Hamburg for the last five years.
Social insects employ a range of behaviours to protect their colonies against disease, but little is known about how such collective behaviours are orchestrated. This is especially true for the social Blattodea (termites). We developed an experimental approach that allowed us to explore how the social response to disease is co-ordinated by multistep host-pathogen interactions. We infected the eastern subterranean termite Reticulitermes flavipes with the entomopathogenic fungus Metarhizium anisopliae, and then, at different stages of infection, reintroduced them to healthy nestmates and recorded behavioural responses. As expected, termites groomed pathogen-exposed individuals significantly more than controls; however, grooming was significantly elevated after fungal germination than before, demonstrating the importance of fungal status to hygienic behaviour. Significantly, we found that cannibalism became prevalent only after exposed termites became visibly ill, highlighting the importance of host condition as a cue for social hygienic behaviour. Our study reveals the presence of a coordinated social response to disease that depends on stage of infection. Specifically, we show how the host may play a key role in triggering its own sacrifice. Sacrificial self-flagging has been observed in other social insects: our results demonstrate that termites have independently evolved to both recognize and destructively respond to sickness.
Territories of rock-inhabiting fungi: Survival on and alteration of solid air-exposed surfaces
(2018)
Subaerial biofilms that are omnipresent at the interface between all solid substrates and the atmosphere are composed of a unique and widespread group of ascomycetes called rock-inhabiting fungi or microcolonial fungi (MCF), typically in communities with other microorganisms. While subaerial biofilms in toto have important roles in mineral weathering and biodeterioration of materials, methodological approaches to subaerial biofilm communities are diverse and frequently focussed on MCF. Here, we review the historical development of the research methods applied in the field and consider perspectives to increase our understanding of the biofilm-induced changes of solid substrate surfaces.