Filtern
Dokumenttyp
Schlagworte
- Analyse (2)
- Hochdruckflüssigchromatographie (2)
- Holz (2)
- Analytical methods (1)
- Biocides (1)
- Biozid (1)
- DIN (1)
- Extraktion (1)
- Fenoxycarb (1)
- Fungal decay (1)
Organisationseinheit der BAM
Environmental Risk Assessment of Treated Timber in Service - the Environment Focus Group Approach
(2000)
In the context of the Biocidal Products Directive (98/8/EC), and of the OECD work on wood preservatives, the Environment Focus Group (EFG), comprising 8 institutes and the European Wood Preservative Manufacturers Group, has been working on the environmental risk assessment of treated timber in service. A literature review of emissions from treated timber has revealed that very little existing data is usable for environmental risk assessment; the most relevant data are kinetic curves of emissions over time, which show clearly the non-linear emissions behaviour of treated wood over time. The EFG has suggested real exposure conditions for treated timber in the environment, and listed typical exposure scenarios. Five representative scenarios are characterised in detail, for use in the calculation of Predicted Environmental Concentrations (PECs). The existing methods to determine emissions from treated wood have been reviewed. Most existing experimental models cannot be used to predict environmental emissions. Monitoring of commodities in service has its specific constraints. Chemical analysis and ecotoxicity testing have also been reviewed and their relationship has been discussed. Principles for the design of experimental models, for the determination of emission fluxes from treated wood to the environment, have been established.
Vergleichsanalysen zur Bestimmung von Permethrin aus Holz ergaben, dass sich sowohl Extraktion mit Methanol im Ultraschallverfahren als auch Soxhlet-Extraktion mit Ethylacetat gut eignen, um Permethrin aus behandeltem Holz zu lösen. Verschiedene andere Extraktionsverfahren führen zu Minderbefunden. Zur quantitativen Bestimmung von Permethrin können sowohl Hochdruckflüssigchromatographie als auch Gaschromatographie eingesetzt werden.
Fenoxycarb ist ein insektizider Wirkstoff,
der wegen seiner hormonähnlichen Wirkung in sehr
geringen Konzentrationen in Holzschutzmitteln eingesetzt
werden kann. Das hat zur Folge, dass aus Extrakten von
behandeltem Holz relativ geringe Fenoxycarb-Mengen vor
dem Hintergrund ebenfalls extrahierter Holzinhaltsstoffe
zu bestimmen sind. In Vergleichsanalysen verschiedener
Laboratorien wurde gezeigt, dass Fenoxycarb durch Methanol
mit hoher Ausbeute aus Holz extrahierbar ist und
in den Extrakten durch Hochdruckflüssigchromatographie
in Kopplung mit UV-Detektion bestimmt werden kann.
Fenoxycarb-Konzentrationen im unteren Bereich der
erforderlichen Einbringmengen können mit dem erprobten
Verfahren nur nach zusätzlicher Probenaufarbeitung
bestimmt werden. Bedingt durch schwer auswertbare
Chromatogramme sind die Abweichungen der Ergebnisse
zwischen verschiedenen Laboratorien relativ hoch.
Die Normenreihe DIN 68800 ist Ende der 2000er Jahre komplett überarbeitet worden. Der Kommentar bietet den interessierten Kreisen der Bauaufsicht, des Holzbaus, der Holzschutzmittelindustrie, der Wissenschaft, den Prüfinstituten, der Sägeindustrie, den Umweltverbänden, den Verbrauchern, den Schädlingsbekämpfern und Architekten wertvolle Hilfen bei der Anwendung und Interpretation der Norm.
The suitability of common analytical methods for the determination of active substances from wood preservatives in aged wood samples was investigated during an interlaboratory study. Permethrin, propiconazole and tebuconazole were quantified in 1.5 and 8 year-old wood samples by gas chromatography and liquid chromatography. Generally, the applied Methods yielded reliable results for these samples. However, wood components can coelute with propiconazole and tebuconazole during liquid chromatography. Optimization of separation might be required if UV detection is applied.
Numerous non-native tree species are given attention with respect to the reforestation of calamity areas in Europe. Among them, several species may form durable wood which can be used for outdoor applications, but differences in wood durability are expected between original and European growth sites. This study aimed at examining the biological durability against wooddestroying fungi and water permeability of German-grown Dawn redwood (Metasequoia glyptostroboides) and Port Orford cedar (Chamaecyparis lawsoniana). The heartwood of both wood species was assigned to durability class 4 (DC 4, less durable) in soil contact and DC 1–4 (very to less durable) against wood-destroying basidiomycetes. However, according to the Meyer-Veltrup model, their material resistance dose was notably higher compared to the reference species Norway spruce (Picea abies), and the resulting service life of above ground structures should be a multiple of the reference.