Filtern
Dokumenttyp
- Vortrag (26)
Sprache
- Englisch (26)
Referierte Publikation
- nein (26)
Schlagworte
- Railway (3)
- Vehicle (3)
- Atmospheric (2)
- Cargo (2)
- Liquid cargo (2)
- Rail (2)
- Road (2)
- Sloshing (2)
- Acceleration (1)
- Assessing (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (26) (entfernen)
A preliminary analysis has been presented on the advantages for Mexico to migrate the cargo from trucking to railways. While the approach is highly unrealistic, it describes interesting figures that should animate the interest of Mexico to develop its railway infrastructure. Adverse situations due to the topographic characteristics of the mostly populated area of Mexico. The data presented in this paper suggest that the building of railway infrastructure is economically feasible.
An analysis has been presented pertaining to the use of a convex
bottom tank shape instead of an elliptical, for a road tanker.
Two analyses have been made, concerning the static and the dynamic
relative performance expectations of such tank shape when compared
with the elliptical shape performance.
The outputs of both analyses suggest that the level of average benefit
due to using the proposed shape, is around 10%, with a maximum
benefit observed in the dynamic performance in the case of the
minimum fill level.
Correlation between static and dynamic outputs. Manufacturing.
Longitudinal Load transfer light sensitivity to cargo type, fill level and the impact distance.
Maximum sloshing effect for the case of the lowest fill level 12
while for half fill level the sloshing cargo performs as a dynamic damper, with a maximum effect of 6 in the case of medium impact input
The sloshing effect for the highest fill level yielded a mixed output, with the maximum impact distance producing a positive but moderate effect.
An experimental model has been proposed to measure the energy losses due to the centre plate friction. The physical principles of the testing are based upon the loss of potential energy during turning.
The testing rig includes a variable friction centre plate. A stick
slide model was proposed for the centre plate, whose results suggest significant losses of potential energy due to centre plate friction, around 20 %.
The proposed mechanism is based on a cam design and is independent of any external energy source.
Conclusions
Issue 1: An accelerated wear tip of the cam shaped journal .
Issue 2: The spherical rollers proposed for the bearings would be underused, as the contact force will be downwards, and such bearing has supporting capacity in both vertical directions.