Filtern
Dokumenttyp
- Vortrag (26)
Sprache
- Englisch (26)
Referierte Publikation
- nein (26)
Schlagworte
- Railway (3)
- Vehicle (3)
- Atmospheric (2)
- Cargo (2)
- Liquid cargo (2)
- Rail (2)
- Road (2)
- Sloshing (2)
- Acceleration (1)
- Assessing (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (26) (entfernen)
Liquid cargo has a significant impact on the interface wheel-track interaction. The sloshing affects the track-railcar's dynamic behavior. The effect is detectable at the track level and at the vehicle. Its characterization requires the combination of different techniques:
Empirical Mode Decomposition (EMD)
Time-Frequency Maps
Sloshing occurred when significant perturbations happened in the railcar:
The railcar entered a curve
Reduction in its travel speed
A railcar with a tank is a clear example of a multibody dynamic system with a nonlinear behavior.
Figure 10 illustrates the theoretical results from the simplified model considered, together with the experimental data. These results and measurements are presented one next to the other, in order to facilitate the validity analysis of the proposed simulation methodology.
These results illustrate that the trends are comparable for both sets of data, that is, a similar range is obtained for all of the variables reported. A lower pressure is generated in chamber 5, which is attributed to the shorter length of this chamber. However, such increase in pressure does not correspond exactly to the difference of lengths, as the ratio of lengths would cause a differential pressure of 2.3/1.23 = 1.86, while the ratio of average pressures is on the order of 2. That is, there is an incremental, which is associated to the maximum height attained by the fluid in the chamber. The major difference between both sets of data, the experimental and theoretical, is that the theoretical do not include much of the noise and random oscillations reported in the experimental data. Such noise, however, is of very low amplitude, in comparison with the maximum values attained. The practical applications of these results could be in the area of chamber design, so that the effects of the length of the chambers be taken into account. That is, such greater lengths for the fluid in the chamber would involve larger pressures and consequently, greater stresses. However, the analysis should include an overall perspective, that is, the shortening of the chambers would imply an increase in the number of chambers, for a certain total payload, and the superposition effect of pressures, should be considered. On the other hand, the analysis could be extended to characterize the effects of the distribution of the lengths of the different chambers along the axis of the tanker, as the different resulting forces could have different effects on the pitch response of the road tanker.
Simplified cargo-vehicle interaction: linear pendulum, rigid multibody linear dynamics, straight, instead of articulated vehicle.
Realistic results about the pressure developed on the sensor, with differences lower than 10% between the simulation and the experimental data.
Sloshing could affect the braking efficiency in 7%, approximately, corresponds with other sources.
A preliminary analysis has been presented on the advantages for Mexico to migrate the cargo from trucking to railways. While the approach is highly unrealistic, it describes interesting figures that should animate the interest of Mexico to develop its railway infrastructure. Adverse situations due to the topographic characteristics of the mostly populated area of Mexico. The data presented in this paper suggest that the building of railway infrastructure is economically feasible.
An analysis has been presented pertaining to the use of a convex
bottom tank shape instead of an elliptical, for a road tanker.
Two analyses have been made, concerning the static and the dynamic
relative performance expectations of such tank shape when compared
with the elliptical shape performance.
The outputs of both analyses suggest that the level of average benefit
due to using the proposed shape, is around 10%, with a maximum
benefit observed in the dynamic performance in the case of the
minimum fill level.
Correlation between static and dynamic outputs. Manufacturing.
Longitudinal Load transfer light sensitivity to cargo type, fill level and the impact distance.
Maximum sloshing effect for the case of the lowest fill level 12
while for half fill level the sloshing cargo performs as a dynamic damper, with a maximum effect of 6 in the case of medium impact input
The sloshing effect for the highest fill level yielded a mixed output, with the maximum impact distance producing a positive but moderate effect.