• Treffer 76 von 173
Zurück zur Trefferliste
Zitieren Sie bitte immer diesen URN: urn:nbn:de:kobv:b43-604

Characterization of Polymer Nanocomposites based on Layered Double Hydroxide and Carbon Nanotubes

  • Polymer based nanocomposites by melt blending of synthesized ZnAl-Layered Double Hydroxide (ZnAl-LDH) and Polyolefines [Polypropylene (PP) and Polyethylene (PE)] and also Polylactide (PLA) with MgAl-LDH and multi-walled Carbon Nanotubes (MWCNT) were investigated. The LDH was organically modified by using a surfactant sodium dodecylbenzene sulfonate (SDBS) to increase the interlayer spacing of the LDH, so that polymer chains can intercalate the inter layer galleries. Some amount of maleic anhydride grafted PP and PE were incorporated in the nanocomposites based on PP and PE respectively to enable the interaction of the non-polar polymers (PP and PE) with the LDH. The resulting morphology was investigated by a combination of Differential Scanning Calorimeter (DSC), Small and Wide-angle X-ray scattering (SAXS and WAXS) and broadband dielectric relaxation spectroscopy (BDS). In case of LDH based nanocomposites (PP, PE and PLA), the homogeneity of the nanocomposites and the average numberPolymer based nanocomposites by melt blending of synthesized ZnAl-Layered Double Hydroxide (ZnAl-LDH) and Polyolefines [Polypropylene (PP) and Polyethylene (PE)] and also Polylactide (PLA) with MgAl-LDH and multi-walled Carbon Nanotubes (MWCNT) were investigated. The LDH was organically modified by using a surfactant sodium dodecylbenzene sulfonate (SDBS) to increase the interlayer spacing of the LDH, so that polymer chains can intercalate the inter layer galleries. Some amount of maleic anhydride grafted PP and PE were incorporated in the nanocomposites based on PP and PE respectively to enable the interaction of the non-polar polymers (PP and PE) with the LDH. The resulting morphology was investigated by a combination of Differential Scanning Calorimeter (DSC), Small and Wide-angle X-ray scattering (SAXS and WAXS) and broadband dielectric relaxation spectroscopy (BDS). In case of LDH based nanocomposites (PP, PE and PLA), the homogeneity of the nanocomposites and the average number of stack size (4 – 7 layers) were determined using scanning micro focus SAXS (BESSY II). DSC investigations of PP and PE based LDH nanocomposites showed a linear decrease in crystallinity as a function of filler concentration. The extrapolation of this decreasing dependence to zero estimates a limiting concentration of 40 wt% and 45 wt% respectively. Above this amount of LDH the crystallinity of the polymers is completely suppressed. This finding is in agreement with WAXS investigations where the area below the crystalline reflections and amorphous halo were calculated and used to estimate the degree of crystallinity. PLA/LDH nanocomposites presented a little different behavior, the crystallinity of the polymer at first increases and then decreases as a function of LDH concentration. In this case the crystallinity will be suppressed at around 15 wt%. The dielectric spectra of the nanocomposites based on PP/LDH and PE/LDH show several relaxation processes which are discussed in detail. The intensity of the dynamic glass transition increases with the concentration of LDH. This is attributed to the increasing concentration of the exchanged anion dodecylbenzene sulfonate (SDBS) which is adsorbed at the LDH layers. Therefore, a detailed analysis of the β-relaxation provides information about the structure and the molecular dynamics in the interfacial region between the LDH layers and the polymer matrix which is otherwise dielectrically invisible (low dipole moment, non-polar). In case of PLA/LDH, three relaxation processes related to dynamic glass transition and one localized fluctuations were identified and analyzed in detail to understand the morphology. For this system, one dynamic glass transition process originates from the fluctuations of the interfacial molecules, second from the PLA matrix (polar polymer, C=O in the main chain) and the third from segments confined between the intercalated LDH sheets. Additional thermal investigations were carried out for PP/LDH and PLA/LDH samples. The increase in the rigid amorphous fraction (RAF) was observed in both the cases. This is attributed to the polymer molecules which are in close proximity to LDH sheets, as they hinder their mobility. This is analyzed in detail and related to the BDS results. PLA based MWCNT nanocomposites were investigated by BDS as initial result. The findings showed that between 0.5 and 1 wt% of CNT, a percolating network of the nanotubes is formed which leads to DC conductivity. This is due to the high aspect ratio of the CNTs and also the van der Waals interaction between the nanotubes which forms a network leading to conductivity.zeige mehrzeige weniger

Volltext Dateien herunterladen

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Purv J. Purohit
Dokumenttyp:Dissertation
Veröffentlichungsform:Eigenverlag BAM
Schriftenreihe (Bandnummer):BAM Dissertationsreihe (98)
Sprache:Englisch
Jahr der Erstveröffentlichung:2013
Veröffentlichende Institution:Bundesanstalt für Materialforschung und -prüfung (BAM)
Titel verleihende Institution:Technische Universität Berlin, Fakultät III − Prozesswissenschaften
Gutachter*innen:Andreas SchönhalsORCiD, Manfred H. Wagner
Datum der Abschlussprüfung:23.11.2012
Verlag:Bundesanstalt für Materialforschung und -prüfung (BAM)
Verlagsort:Berlin
Jahrgang/Band:98
Erste Seite:1
Letzte Seite:144
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Chemische Verfahrenstechnik / Chemische Verfahrenstechnik
Freie Schlagwörter:Charakterisierung; Hydrotalkit; Kohlenstoffnanoröhren; Polymer; Struktur-Eigenschaften Beziehungen
Carbon Nanotubes; Characterization; Layered Double Hydroxide; Nanocomposites; Polymer Nanokomposite
URN:urn:nbn:de:kobv:b43-604
ISSN:1613-4249
ISBN:978-3-9815360-6-5
Verfügbarkeit des Dokuments:Datei für die Öffentlichkeit verfügbar ("Open Access")
Lizenz (Deutsch):License LogoAllgemeines Deutsches Urheberrecht
Datum der Freischaltung:23.01.2015
Referierte Publikation:Nein
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.