• Treffer 1 von 1
Zurück zur Trefferliste

A mesoscale finite element model for fiber reinforced concrete

  • Strain hardening ultra high performance fibre reinforced cementitious composites (UH-PFRCC) exhibit increased strength, ductility, and energy absorption capacity when compared to their quasi-brittle, unreinforced counterparts. A mesoscale finite element model can depict the underlying causes for the structural response of UHPFRC and thus help to optimize the fibre content, the fibre dimensions, and the fibre orientation. Furthermore, it facilitates the investigation of strain rate effects in UHPFRCC under dynamic loading. The mesoscale model can either be used directly or as a representative volume element for a macroscale model. This work proposes a two-dimensional and a three- dimensional mesoscale finite element model to simulate the structural response of strain hardening UHPFRCC. The mesoscale model employs an implicit gradient enhanced damage model, proposed by Peerlings et al., for the cement matrix and a local bond stress-slip model, proposed by Elige-hausen, Popov, andStrain hardening ultra high performance fibre reinforced cementitious composites (UH-PFRCC) exhibit increased strength, ductility, and energy absorption capacity when compared to their quasi-brittle, unreinforced counterparts. A mesoscale finite element model can depict the underlying causes for the structural response of UHPFRC and thus help to optimize the fibre content, the fibre dimensions, and the fibre orientation. Furthermore, it facilitates the investigation of strain rate effects in UHPFRCC under dynamic loading. The mesoscale model can either be used directly or as a representative volume element for a macroscale model. This work proposes a two-dimensional and a three- dimensional mesoscale finite element model to simulate the structural response of strain hardening UHPFRCC. The mesoscale model employs an implicit gradient enhanced damage model, proposed by Peerlings et al., for the cement matrix and a local bond stress-slip model, proposed by Elige-hausen, Popov, and Bertero, for the bond between the cement matrix and the steel fibres. The steel fibres are modeled discretely as one-dimensional truss elements that are coupled to the cement matrix via bond elements. The implementation of hooked end fibres is realized in the constitutive equations of the bond elements. The tensile stress-strain response of UHPFRCC is a consequence of local matrix cracking and bond failure. Both phenomena can be depicted when modeling the cement matrix, the steel fibres, and the fibre-to-matrix bond explicitly. In this work, the parameters for the constitutive equations of each constituent are determined through uniaxial Tension tests, bending tests, and fibre pullout tests. Additionally, UHPFRCC specimens are simulated with the same parameters and compared to experimental results.zeige mehrzeige weniger

Volltext Dateien herunterladen

  • 2016_ECCOMAS.pdf
    eng

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Autor*innen:Philip Huschke
Koautor*innen:Jörg F. Unger
Dokumenttyp:Vortrag
Veröffentlichungsform:Präsentation
Sprache:Englisch
Jahr der Erstveröffentlichung:2016
DDC-Klassifikation:Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten
Freie Schlagwörter:Damage; FEM; Softening
Veranstaltung:ECCOMAS 2016
Veranstaltungsort:Crete, Greece
Beginndatum der Veranstaltung:05.06.2016
Enddatum der Veranstaltung:10.06.2016
Verfügbarkeit des Dokuments:Datei im Netzwerk der BAM verfügbar ("Closed Access")
Datum der Freischaltung:13.12.2016
Referierte Publikation:Nein
Eingeladener Vortrag:Nein
Einverstanden
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.