Zitieren Sie bitte immer diesen URN: urn:nbn:de:kobv:b43-400831
Design of highly porous hydroxyapatite scaffolds by conversion of 3D printed gypsum structures – a comparison study
- Hydroxyapatite (HA) is a bioceramic material with excellent biological properties. However, these properties are strongly dependent of ist crystallinity degree, with high values of crystallinity associated to poor resorption rates and bioactivity. This work evaluates the properties of HA samples produced by two different free-forming conformation methods, CNC machining and 3D printing. In both cases, porous gypsum samples were produced and subsequently converted into HA in a reaction with di-ammonium hydrogen phosphate at 100°C and pH 8. A total conversion of the samples was achieved after 36 h independently of the conformation method used. The microstructure, however, before and after the conversion is showed to be dependent on the method used. After conversion the machined samples achieved a Maximum compressive strength of 3.5 MPaforporosities of circa 80%, while 3D printed samples achieved a tensile strength of 2.0 MPa by porosities of 61%.
Autor*innen: | A. Dantas, D. Scalabrin, R. Farias, A. A. Barbosa, A. Ferraz, Cynthia Wirth |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Procedia CIRP |
Jahr der Erstveröffentlichung: | 2016 |
Veröffentlichende Institution: | Bundesanstalt für Materialforschung und -prüfung (BAM) |
Verlag: | Elsevier |
Jahrgang/Band: | 49 |
Erste Seite: | 55 |
Letzte Seite: | 60 |
DDC-Klassifikation: | Technik, Medizin, angewandte Wissenschaften / Ingenieurwissenschaften / Ingenieurwissenschaften und zugeordnete Tätigkeiten |
Freie Schlagwörter: | 3D printing; Additive manufacturing |
Veranstaltung: | The Second CIRP Conference on Biomanufacturing |
Veranstaltungsort: | Manchester Conference Centre, UK |
Beginndatum der Veranstaltung: | July 29, 2015 |
Enddatum der Veranstaltung: | July 31, 2015 |
DOI: | 10.1016/j.procir.2015.07.030 |
URN: | urn:nbn:de:kobv:b43-400831 |
ISSN: | 2212-8271 |
Verfügbarkeit des Dokuments: | Datei für die Öffentlichkeit verfügbar ("Open Access") |
Lizenz (Deutsch): | Creative Commons - Namensnennung-Nicht kommerziell-Keine Bearbeitung |
Datum der Freischaltung: | 05.05.2017 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 05.05.2017 |
Schriftenreihen ohne Nummerierung: | Wissenschaftliche Artikel der BAM |