540 Chemie und zugeordnete Wissenschaften
Refine
Document Type
Institute
Language
- English (12) (remove)
Has Fulltext
- yes (12) (remove)
Keywords
- APP (1)
- Aromatische Polyesterpolyole (1)
- EXAFS (1)
- PET-Abfall (1)
- SEM (1)
- XRD (1)
- bienzyme sensor (1)
- bilirubin oxidase (1)
- biosensor (1)
- bond-length (1)
- carbon nanotube (1)
- cytochrome c (1)
- hexacyanoferrate (1)
- magnetite (1)
- mediator-less (1)
- membran-free (1)
- microcrystalline cellulose (1)
- protein engineering (1)
- structure (1)
- superoxide (1)
An oxygen reducing electrode made of bilirubin oxidase and multi-walled carbon nanotubes (BOD-MWCNT-Au electrode) is coupled to enzymes catalysing oxygen-consuming reactions such as glucose oxidase (GOD) to result in a membrane-free bienzyme electrode. The feasibility of such a molecularly assembled system stabilized by covalent linkage has been demonstrated. The electrochemical characterisation of the bienzyme electrode reveals sensitivity to the enzyme substrate. The results indicate that the BOD-electrode provides a suitable platform for sensing analytes for which oxidases of high activity are available.
Presently, about 8 million metric tons of polyurethanes are produced in the world annually. During production of precursors, semi-finished products and final products about 5 to 10 % of this amount is waste, i. e. an amount of about half a million tons. To this add the products after their life cycle. This is a large source of material which should not be given to landfills or incinerators but be used as secondary materials for the production of new polyurethanes.
This paper is directed to the development of a new type of branched aromatic polyester polyols (APP) based on PET wastes designed to produce high quality polyurethanes (PUR). To this end, a modifi ed transesterification of PET by a glycol mixture was used and simultaneously small amounts of triols were incorporated into the reaction mixture. By this method, a series of branched APP’s with hydroxyl numbers in the range of 260 to 380 mg KOH/g and hydroxyl functionalities between 2.00 and 2.30 was received. The viscosity of the products increased slowly with the functionality in the range of 2.03 to 2.12 and sharper beyond this value. An optimum of properties was found in each series of APP with hydroxyl numbers of 260, 320, and 380 mg KOH/g, resp. with respect of viscosity, long term stability and hydroxyl functionality. APP with a higher hydroxyl functionality are useful to produce cast polyurethane resins, those with lower hydroxyl numbers for coatings, e. g. of leather.
A new synthesis method for producing cellulose ferrite micro- and nano- composites was developed and new material properties were studied. Microcrystalline cellulose was modified with a mixture of Fe+2/Fe+3 to produce surface bonded nanoparticles magnetite (Fe3O4). Optimal conditions were determined. Microsized hematite (Fe2O3) was mixed with microcrystalline cellulose and used as a reference. The magnetite modified microcrystalline cellulose and hematite filled microcrystalline cellulose were used together with polyurethane prepolymer. New composite crosslinked conductivity materials based on the magnetite modified microcrystalline or hematite filled microcrystalline cellulose and polyurethane were developed. Morphology, crystalline properties, water absorption and electro conductivity of these materials were characterized. The physical properties of these materials were characterized by different analytical methods: SEM, XRD, water absorption and electrical resistance.
The redox behavior of proteins plays a crucial part in the design of bioelectronic systems. We have demonstrated several functional systems exploiting the electron exchange properties of the redox protein cytochrome c (cyt c) in combination with enzymes and photoactive proteins. The operation is based on an effective reaction at modified electrodes but also to a large extent on the capability of self-exchange between cyt c molecules in a surface-fixed state. In this context, different variants of human cyt c have been examined here with respect to an altered heterogeneous electron transfer (ET) rate in a monolayer on electrodes as well as an enhanced self-exchange rate while being incorporated in multilayer architectures. For this purpose, mutants of the wild-type (WT) protein have been prepared to change the chemical nature of the surface contact area near the heme edge. The structural integrity of the variants has been verified by NMR and UV–vis measurements. It is shown that the single-point mutations can significantly influence the heterogeneous ET rate at thiol-modified gold electrodes and that electroactive protein/silica nanoparticle multilayers can be constructed with all forms of human cyt c prepared. The kinetic behavior of electron exchange for the mutant proteins in comparison with that of the WT has been found altered in some multilayer arrangements. Higher self-exchange rates have been found for K79A. The results demonstrate that the position of the introduced change in the charge situation of cyt c has a profound influence on the exchange behavior. In addition, the behavior of the cyt c variants in assembled multilayers is found to be rather similar to the situation of cyt c self-exchange in solution verified by NMR.
Nanostructured ferritic oxide dispersion strengthened (ODS) alloy is an ideal candidate for fission/fusion power plant materials, particularly in the use of a first-wall and blanket structure of a next generation reactor. These steels usually contain a high density of Y-Al-O nanoparticles, high dislocation densities and fine grains. The material contains nanoparticles with an average diameter of 21 nm. Irradiation of these alloys was performed with a dual beam irradiation of 2.5 MeV Fe+/31 dpa and 350 keV He+/18 appm/dpa. Irradiation causes atomic displacements resulting in vacancy and self-interstitial lattice defects and dislocation loops. Additionally to structural changes, the effect of the irradiation generated defects on the mechanical properties of the ODS is investigated by nanoindentation. A clear hardness increase in the irradiated area is observed, which reaches a maximum at a close surface region. This feature is attributed to synergistic effects between the displacement damage and He implantation resulting in He filled vacancies
Methylcellulose (MC) / SiO2 organic / inorganic hybrid materials have been prepared from MC and methyltriethoxysilane or ethyltrimethoxysilane, and characterized by XRD, FTIR and AFM. XRD showed peak shifts. FTIR shows intermolecular hydrogen bonding between MC and SiO2. AFM depicts surface roughness which depends on the silica precursor and MC content.
The synthesis of polyurea dispersion polyols (PHD) was developed using a new route via depolymerization of polyurethane polyureas by a mixture of at least two glycols in the presence of a consumable catalyst, i. e. a secondary aliphatic amine. On this way such polyols were produced with a particle size distribution with a maximum in the 120 to 400 nanometer region with hydroxyl numbers of 180 to 300 mg KOH/g being optically clear and highly reactive. The exact adjustment of the ethylene oxide content of the reaction mixture together with that of the polyether polyol originally present in the polyurethane polyurea used in a predetermined range of surface tension as well as specific reaction conditions leads to these polyols which will give in turn polyurethanes with exceptional properties.
The sample preparation for biological and chemical probes involves following a strict workflow to eliminate any contamination to the sample beforehand. Furthermore, it is time consuming and must be carried out by trained personnel such as a nurse or other supervisors, making it therefore expensive. The development of novel sample preparation techniques paired with modern sample analysis systems is focused on improving the operability while keeping a constant quality of results. This is important to analyse samples, which cannot be determined with current screening conditions. The analysis of analytes is required to receive a more detailed picture of the patient and to fully understand its complexity. Possible samples for in-depth analysis of chemical origin can be cholesterol or glucose. More complex samples, such as blood or saliva, require a sophisticated system, which analyses the samples for their individual compounds.
Shape memory polyurethanes (SMPUs) were synthesized by 4,4′-diphenylmethane diisocyanate (MDI), hexane-1,6-diol (HD), polypropylene glycol (PPG), and recycled polyvinyl butyral (PVB). Dynamic mechanical analysis, differential scanning calorimetry and Fourier transformation infrared attenuated total reflection spectroscopy was used to characterize the poly (vinylbutyral-urethanes). Micro-phase domain separation of hard and soft segments and phase inversion were investigated. Increasing the hard segment content, i.e., average hard segment molecular weight, leads to an increase in the degree of micro-phase separation, hard domain order and crystallinity. The crystalline hard segment structures combined with the elastic nature of soft segment matrix provide enough physical and chemical crosslinks to have shape memory effect.