Refine
Year of publication
Document Type
Language
- German (158)
- English (56)
- Multiple languages (1)
Is part of the Bibliography
- no (215)
Keywords
- Trockenbau (38)
- Bauproduktenrecht (15)
- Bioökonomie (11)
- Brandschutz (10)
- Holzbau (9)
- Case Study (7)
- Thin Film Transistors (7)
- Timber engineering (7)
- Cement (6)
- Construction Chemistry (6)
Institute
- Fakultät für Holztechnik und Bau (215) (remove)
Temperature and Frequency Dependent Characteristics of Amorphous Silicon Thin Film Transistors
(1995)
Bemessung mit Beschränkung der Rißbreiten hinsichtlich der Wasserundurchlässigkeit von Tunnelschalen
(1996)
Werden zweischalige Tunnelröhren mit einer Folienabdichtung versehen, kann bei entsprechender Formgebung und Betontechnologie, die begrenzte Abbindetemperaturen vorschreibt, eine unbewehrte Innenschale zur Ausfuehrung kommen. Mit grossen Rissbreiten ist zu rechnen, die jedoch die Tragfähigkeit nicht beeinflussen. Die Rissgefahr sollte aber unbedingt mit dem Auftraggeber abgesprochen werden. Wird die Innenschale direkt auf die Aussenschale betoniert, so reicht zur Aufnahme der Zwangsspannungen aus abfliessender Hydratationswaerme und Schwinden eine Mindestbewehrung von 1 Promille an der Bergseite und 2 Promille an der Luftseite der Innenschale aus. Bedingung ist jedoch eine gute Betontechnologie, die die Temperaturdifferenzen aus abfliessender Hydratationswaerme auf höchstens 20 K begrenzt. (A)
We report temperature measurements of inverted staggered amorphous silicon thin film transistor subthreshold conductance for devices with and without a top silicon nitride passivating layer. Subthreshold conductance activation energies clearly show the different conductance paths in the active layer of these devices. Transistors with no top nitride layer conduct in the bulk amorphous silicon, whereas the devices with a top nitride layer conduct at the interface between the amorphous silicon and the top nitride (a ‘‘back’’ channel). Gate bias stressing and light soaking experiments uphold the existence of the back channel. We also present two‐dimensional simulations that support our interpretation of the experimental data.
Analytical Models for Amorphous Silicon and Polysilicon TFTs for High Definition Display Technology
(1996)
Plattentragwerke
(1997)
We describe physically based analytical models for n‐channel amorphous silicon thin film transistors and for n‐ and p‐channel polysilicon thin film transistors. The models cover all regimes of transistor operation: leakage, subthreshold, above‐threshold conduction, and the kink regime in polysilicon thin film transistors. The models contain a minimum number of parameters which are easily extracted and can be readily related to the structural and material properties of the thin film transistors. The models have been verified for a large number of devices to scale properly with device geometry.
Both the subthreshold slope and the threshold voltage in inverted-staggered amorphous silicon thin-film transistors (a-Si:H TFTs) are vulnerable to metastable changes in the density of states (DOS) due to Fermi level displacement. In previous work, we have used passivated and unpassivated TFTs to distinguish between the effects of bulk states and interface states at the top passivating nitride interface. Here we report the results of experimental measurements and two-dimensional (2-D) simulations on unpassivated TFTs. Since there are no top interface states, all the observed changes are due solely to the bulk DOS. The subthreshold current activation energies in a-Si:H TFTs are compared for n-channel nonpassivated TFTs before and after bias stress. The experimental results agree well with the 2-D simulations, confirming that the dependence of subthreshold current activation energy on gate bias reveals the distribution of the DOS in energy but cannot resolve the magnitude of features in the DOS. This type of analysis is not accurate for TFTs with a top passivating nitride, since the activation energies in such devices are affected by the interfere states.
Trockenbau-Atlas
(1998)
Brettstapelbauweise
(1998)
The loss of the heat of hydration leads to restraint and intrinsic stresses in concrete structures that may cause cracks. This report is concerned with the realistic simulation of the physical processes during hydration using the Finite-Element-Method.
Aus verkehrstechnischer Sicht bietet der Hofbergtunnel eine ideale Möglichkeit den Verkehr in der Innenstadt von Landshut zu beruhigen. Die extrem unterschiedliche Überlagerung von 12 bis 68 und eine schwierige Geologie mit dicht gelagerten Kiesen, die jedoch nahezu keine Kohäsion auf weisen und mit Rollkieslagen durchzogen sind, erfordern sowohl von der rechnerisch-konstruktiven Bearbeitung wie von der Bauausführung eine erhöhte Anpassungsfähigkeit an die vor Ort angetroffenen, stark wechselnden Verhältnisse. Am Beispiel des Hofbergtunnels wird das Zusammenwirken zwischen konstruktiver Bearbeitung, Geologie, Meßergebnissen und Bauausführung beschrieben.
Technisch-wirtschaftlicher Vergleich von Spießschirmsicherungen am Beispiel des Tunnels Farchant
(1999)
We describe a new physics based, analytical DC model accounting for short channel effects for hydrogenated amorphous silicon (a-Si:H) thin film transistors (TFT's). This model is based on the long channel device model. Two important short-channel phenomena, self-heating and kink effects, are analyzed in detail. For the self-heating effect, a thermal kinetic analysis is carried out and a physical model and an equivalent circuit are used to estimate the thermal resistance of the device. In deriving the analytical model for self-heating effect, a first order approximation and self-consistency are used to give an iteration-free model accurate for a temperature rise of up to 100/spl deg/C. In the modeling of the kink effects, a semi-empirical approach is used based on the physics involved. The combined model accurately reproduces the DC characteristics of a-Si:H TFT's with a gate length of the 4 /spl mu/m. Predictions for a-Si:H TFT's scaled down to 1 /spl mu/m are also provided. The model is suitable for use in device and circuit simulators.
Trockenbau-Atlas
(2002)
Exoten mit Potential
(2004)
Trockenbau-Atlas: Teil I
(2004)
Statik - leicht gemacht?
(2005)
Die seit ca. 50 Jahren im Bauwesen eingesetzte Gipskartonplatte nach DIN 18180 ist in DIN 1052 (04/88) als aussteifende Beplankung für die Holztafelbauweise geregelt. Für den Einsatz als mittragende Beplankung von Holztafeln waren bisher allgemeine bauaufsichtliche Zulassungen des Deutschen Instituts für Bautechnik (DIBt) erforderlich. Durch die Bereitstellung von abgesicherten Festigkeits-, Steifigkeits- und Rohdichtekennwerten ist es nun möglich, die Gipskartonplatten nach dem neuen Sicherheitskonzept des Eurocode EC5 zu berechnen. Die Platten sind in die Neufassung der DIN 1052 (im Folgenden bezeichnet als DIN 1052:04) als tragender Plattenwerkstoff aufgenommen, z. B. für den Einsatz als mittragende und aussteifende Beplankung für Decken- und Wandscheiben.
Trockenbau-Atlas: Teil II
(2005)
Bauen im Bestand: Dachausbau
(2006)
Anschlussmodalitäten
(2006)
Alles dicht?
(2006)
Auch im Trockenbau hält die europäische Harmonisierung mit neuen EN-Normen Einzug. Nach der Einführung der harmonisierten Produktnormen für Dämmstoffe und Holzwerkstoffplatten im Jahr 2004 werden die Hersteller, Planer und Anwender von Trockenbausystemen ab Oktober 2006 mit weiteren neuen Normen konfrontiert, die für den Ausbau von wesentlicher Bedeutung sind.
Leicht und leise
(2008)
Investigations on the interaction of cationic and anionic latex particles with Portland cement
(2008)
The interaction between organic latex polymers and the surface of hydrating cement was investigated by measuring the zeta potential and adsorbed amount of polymer on cement. First, differently charged model latex particles were synthesized in aqueous media by well-known emulsion polymerization technique. The latex polymers were characterized by differential scanning calorimetry (DSC), dynamic light scattering (DLS) and environmental scanning electron microscopy (ESEM). Electrokinetic latex surface properties were investigated by means of streaming potential measurements using a particle charge detector (PCD). It is shown that the anionic latexes adsorb a considerable amount of Ca2+ from the cement pore solution. Next, adsorption of the latex polymers on the surface of hydrating cement was confirmed by zeta potential measurements using the electroacoustic method. A water to cement ratio in the cement paste as low as 0.5 was studied, representing actual conditions in mortar and concrete. Additionally, adsorption isotherms were determined in a sedimentation test using the depletion method. For all latex polymers, Langmuir type adsorption isotherms were found. The latex dosages required to achieve saturated adsorption on the cement surface obtained from zeta potential measurements correspond well with those determined in the sedimentation test. Electron microscopy photographs confirm that the charged latex polymers adsorb selectively on surface areas of hydrating cement showing opposite charge. This way, domains of organic latex polymers exist on the cement surface. They provide adhesion between the inorganic cement matrix and the organic polymer film formed later on by particle coalescence as a result of cement hydration and drying.
Untersuchungen zum Einfluss der Zementporenlösung auf das Verfilmungsverhalten von Latexdispersionen
(2009)
Novel hybrid admixtures for construction applications were prepared by layer-by-layer deposition technique. Colloidal core templates consisting of styrene/acrylate latex particles were coated with multilayers of polycondensate-based dispersants commonly used in concrete. This way, core–shell particles possessing both dispersing and film-forming properties were achieved. Incorporation of the latex@dispersant hybrid additive into a cement paste results in a slow release of the dispersant which instigates prolonged plastification of the cement slurry. Following disintegration of the shell, the latex core particles are released into the pore solution and coalesce into a polymer film which improves the mechanical properties of the hardened cement. Characterization of the templates and novel additives plus tracking of the layer-by-layer polyelectrolyte adsorption was performed by means of zeta potential measurement, dynamic light scattering and electron microscopy. Our method allows to synthesize multifunctional additives with time-controlled release effect.
ESEM-Untersuchungen zum Verfilmungsverhalten von Latex-Dispersionen in Wasser und Zementporenlösung
(2010)
Oh Trockenbau
(2011)
In dieser Arbeit werden die heterogene Softwarelandschaft zur Verbesserung der Holzlogistik in einer einheitlichen Plattform integriert sowie die Auswirkungen der Softwares auf die Durchgängigkeit und Transparenz des Informationsflusses analysiert.
Es wird zunächst der Weg der Logistikkette vom Wald bis ins Werk näher betrachtet, anschließend wird auf diverse Informations- und Kommunikationsplattformen und -technologien eingegangen.
Nachfolgend wird anhand von praxisnahen Beispielen der Prozessablauf Wald-Werk kritisch betrachtet und eine Empfehlung für eine für die Forst- und Holzwirtschaft geeignete IuK-Plattform gegeben.
In dieser Arbeit werden zunächst die Facetten der Rundholztransportlogistik als Spezialgebiet der Verkehrslogistik sowie die derzeitige Tourenplanung beim Rundholztransport und damit der bestehende Handlungsbedarf von theoretischer Seite erörtert.
Mithilfe einer umfangreichen Expertenbefragung wird der praktische Handlungsbedarf zur Optimierung der gebrochenen Rundholzlogistik in Deutschland gestützt.
Nachfolgend werden sämtliche Einflussgrößen zur mathematischen Modellierung gelistet und näher betrachtet. Abschließend finden sich eine konkrete Handlungsempfehlung sowie ein umfassender Ausblick für das bearbeitete Themengebiet.
Environmental scanning electron microscopy (ESEM) and complementary methods were employed to study the time dependent film formation of a latex dispersion in water and cement pore solution. First, a model carboxylated styrene/n-butyl acrylate latex dispersion possessing a minimum film forming temperature (MFFT) of 18 °C was synthesized in aqueous media via emulsion polymerization. Its film forming property was at a temperature of 40 °C, studied under an ESEM. The analysis revealed that upon removal of water, film formation occurs as a result of particle packing, particle deformation and finally particle coalescence. Film formation is significantly retarded when the latex dispersion is present in cement pore solution. This effect can be ascribed to adsorption of Ca2+ ions onto the surface of the anionic latex particles and to interfacial secondary phases. This layer of adsorbed Ca2+ ions hinders interdiffusion of the macromolecules and subsequent film formation of the latex polymer.
High-Tech Supply Chains
(2013)