Refine
Year of publication
- 2023 (2)
Document Type
Language
- English (2) (remove)
Has Fulltext
- no (2)
Is part of the Bibliography
- no (2)
Keywords
- polymer fibers (2) (remove)
The bond between polymer fibers and the surrounding cementitious matrix is essential for the development of concrete reinforcement. The single fiber pull-out test (SFPT) is the standard characterization technique for testing the bond strength. However, the different phases of debonding cannot be distinguished by the SFPT. This study investigates the debonding of different polymer fibers from the surrounding cementitious matrix with a modified SFPT and proposes methods to change the SFPT setup to generate more valuable information on the debonding mechanism. The SFPT was equipped with linear variable differential transformers (LVDT), digital image correlation (DIC) and acoustic emission (AE) analysis. The results demonstrate that the modified SFPT allows a better understanding of the different phases of debonding during fiber pull-out. Furthermore, bond strength values calculated by different methods reveal that the chemical bond of the investigated polymers is not different as reported by previous studies. Deformation measurements performed using LVDTs and DIC are suitable measuring techniques to characterize the debonding mechanism in SFPT. A correlation between recorded AE and debonding phases was not found.
Corrosion of steel reinforcements in concrete constructions is a big topic for the building industry. Polymeric materials are a possible alternative due to their ability to withstand corrosion. To replace steel reinforcements, fibers with high mechanical properties and a good bonding ability between fiber and concrete are needed. Today different approaches for concrete reinforcement by polymer fibers have been investigated. The bonding ability of the fibers can be increased by mechanical anchoring, e.g. crimped or embossed fibers, as well as by a chemical bonding between concrete and fiber surface. To realize the requirements of high mechanical properties and a good bonding behavior, a fiber that is drawn from a co-extruded filament shall be produced and tested. The filament owns an innovative core-shell-structure. The core maintains the fiber-stiffness and the tensile strength while the shell allows using another material to affect the bonding behavior of the fiber. This study shows the usage of fibers with differing shell materials to examine their influence on the mechanical properties of the fiber in total and the adhesion abilities to concrete. As core material, an unfilled polypropylene (PP) is used. The shell materials are varied using different polymers e.g. polypropylene or ethylene acrylic acid copolymer, as well as two PP based compounds filled with wood particles and calcium carbonate blended with a maleic anhydride based coupling agent. The mechanical properties of the fibers are tested by fiber tensile tests to compare the younǵs modulus and the tensile strength. The influence of the shell phase on the bonding ability to concrete is evaluated by the interfacial shear strength calculated from single fiber pull-out tests. Microscopy is used to interpret changes before and after pull-out. The results depict incredible positive effects and allow new insights in possible materials for fiber reinforced concrete constructions.