Refine
Year of publication
- 2016 (11) (remove)
Document Type
- Conference Proceeding (5)
- Contribution to a Periodical (4)
- Other (1)
- Report (1)
Has Fulltext
- no (11)
Is part of the Bibliography
- no (11)
Keywords
- Brandschutz (2)
- DIN 4102-4 (2)
- Holz (2)
- Laminated veneer (2)
- Temporary soil nailing (2)
- Timber engineering (2)
- Beach wood (1)
- Bioeconomy (1)
- Biomassekonversion (1)
- Case Study (1)
Institute
- Fakultät für Holztechnik und Bau (11) (remove)
Laminated veneer lumber poles for temporary soil nailing ‐ investigation of material properties
(2016)
Within a current research project at Rosenheim University of Applied Sciences and Graz University of Technology the possibilities of using beech wood laminated veneer lumber poles as soil anchors for temporary soil nailing systems are investigated. Therefore tensile and bending properties of laminated veneers with high moisture and permanent cement contact concerning the influence of veneer bending rectangular to the fibre are determined. For investigation of material properties under different climate conditions tensile tests on small and faultless single beech wood veneers as well as tensile tests on 6 layered 3 mm samples and 9 layered 2 mm samples were carried out.
Therefore all samples were stored in extreme climate conditions like high moisture content and permanent cement contact. Six layered samples with 3mm thick veneers show a slightly higher strength and stiffness under dry conditions as well as at a moisture content of the samples above fibre saturation. A strength reduction factor concerning temporary geotechnical applications is suggested which considers the influence of long term loading, veneer bending, water saturation and
cement destruction on tensile properties of laminated veneer lumber poles.
Within a current research-project the possibility of using laminated veneer lumber beech wood poles as temporary soil anchors in foundation engineering is investigated. Within this project adhesive properties of laminated veneer lumber beech wood poles are determined. For
use in temporary ground applications the influence of veneer bending, veneer thickness and intensive cement contact is concerned. As standard version two different adhesive systemsmelamine formaldehyde resin (MUF) and a 1-component polyurethane adhesive (PUR) were investigated and compared.
Melamine formaldehyde resin glued samples with 3 mm thick veneers and 1.0N/mm² press force show a higher tensile shear strength but also a higher adhesive failure percentage than polyurethane glued samples. In case of melamine formaldehyde resins the closed time has a great influence on bond line quality. A long closed time reveals a low penetration of adhesive in the cells and a low embedding on the wood surface. For curved structures best results were achieved with a bonding pressure of 1.0 N/mm². A significant difference in strength between the concerned MUF and PUR adhesive system was not recognized.
Ziel des Vorhabens war Prüfung die Untersuchung der technischen und wirtschaftlichen Machbarkeit einer dezentralen Prozesskette zur nachhaltigen Bereitstellung von hochwertigen Grundstoffen aus bislang schwer nutzbarer Non-Food-Biomasse zur stofflichen Nutzung.
Die Untersuchung erfolgt mittels der Weiterentwicklung einer mechanischen Aufschluss- und Fraktionierungstechnologie mit anschließender biochemischer Konversion.
Insgesamt fanden 14 verschiedene Versuchsläufe innerhalb der Projektlaufzeit statt.
In allen Ausgangsmaterialien konnten Zuckerbestandteile mit der enzymatischen Hydrolyse nachgewiesen werden. Somit konnte die technische Machbarkeit bewiesen werden. Nach dem Prinzip einer integrierten Nutzungskaskade wurden die einzelnen Komponenten miteinander verbunden.
Die wirtschaftliche Machbarkeit war jedoch nur gegeben, da die Erlöse aus der Biogasanlage die Verluste in der enzymatischen Hydrolyse ausglichen.
Die enzymatische Hydrolyse hätte für eine eigene Wirtschaftlichkeit höhere Zuckerausbeuten erzielen müssen. Dies konnte auch unter Verwendung verschiedener zusätzlicher Maßnahmen für keinen der Eingangsstoffe reproduzierbar bewiesen werden.
Aus diesem Grund untersucht ein Teil des Konsortiums die wirtschaftliche Machbarkeit einer alternativen Aufschlusstechnologie im Anschluss an das Projekt weiter.
Es wird über die in den Jahren 2014 und 2015 laufende Überarbeitung von DIN 4102-4, speziell für Trockenbau-Konstruktionen, berichtet. Insbesondere wird auf die in einer neuen E DIN 4102-4/A1 zu erwartenden Neuerungen für Trockenbaukonstruktionen als Reaktion auf die Einsprüche zu E DIN 4102-4:2014-06 eingegangen.