Labor Additive and Intelligent Manufacturing for Sustainability (AIMS)
Refine
Document Type
Language
- English (3)
Has Fulltext
- no (3)
Is part of the Bibliography
- no (3) (remove)
Keywords
- Polymers (3) (remove)
Institute
Begutachtungsstatus
- peer-reviewed (2)
In former works, the optical material properties of different polymer powders used for Laser Beam Melting (LBM) at room temperature have been analyzed. With a measurement setup using two integration spheres, it was shown that the optical material properties of polymer powders differ significantly due to multiple reflections within the powder compared to solid bodies of the same material. Additionally, the absorption behavior of the single particles shows an important influence on the overall optical material properties, especially the reflectance of the powder bed. Now the setup is modified to allow measurements at higher temperatures. Because crystalline areas of semi-crystalline thermoplastics are mainly responsible for the absorption of the laser radiation, the influence of the temperature increase on the overall optical material properties is analyzed. As material, conventional polyamide 12 and polypropylene as new polymer powder material, is used. By comparing results at room temperature and at higher temperatures towards the melting point, the temperature-dependent optical material properties and their influence on the beam-matter interaction during the process are discussed. It is shown that the phase transition during melting leads to significant changes of the optical material properties of the analyzed powders.
Purpose – The purpose of this paper is to demonstrate the processability of cohesive PE-HD particles in laser beam melting processes (LBM) of polymers. Furthermore, we present a characterization method for polymer particles, which can predict the quality of the powder deposition via LBM processes. Design/methodology/approach – This study focuses on the application of dry particle coating processes to increase flowability and bulk density of PE-HD particles. Both has been measured and afterwards validated via powder deposition of PE-HD particles in a LBM machine. Findings – For efficient coating in a dry particle coating process, the PE-HD particles and the attached nanoparticles need to show similar surface chemistry, i.e. both need to behave either hydrophobic or hydrophilic. It is demonstrated that dry particle coating is appropriate to enhance flowability and bulk density of PE-HD particles and hence considerably improves LBM processes and the resulting product quality. Originality/value – At present, in LBM processes mainly polyamide (PA), 12 particles are used, which are so far quite expensive in comparison to, for example, PE-HD particles. This work provides a unique and versatile method for nanoparticulate surface modification which may be applied to a wide variety of materials. After the coating, the particles are applicable for the LBM process. Our results provide a correlation between flowability and bulk density and the resulting product quality.
Comparison between the optical properties of injection molded and additive manufactured components
(2018)
Fused Layer Manufacturing (FLM) is an additive technology based on polymer material extrusion. Due to variations in temperature during the manufacturing process and the resulting stress between the stacked layers, the final parts show anisotropic mechanical properties. One possible approach for their reduction is the immediate local preheating of the surface via laser radiation. At first, our research examines the influence of laser parameters as wavelength, power, velocity and area of impact for the preheating of the surface. In addition, an overview of possible parameter combinations is given based on the selection of raw materials, its colors, thicknesses and the manufacturing process. Initially, the absorption level of the materials regarding the emitted wavelength is detected using a spectrophotometer. Subsequently, preheating tests are conducted with different laser types while the temperature is determined by a thermal camera. The selected laser type is planned to get mounted on a prototype-machine for further in-situ preheating experiments on FLM parts during the manufacturing process.