Refine
Keywords
- Femtosekundenlaser (4)
- Bragg grating sensors (1)
- Bragg-Reflektor (1)
- Glas (1)
- Laser (1)
- Laserbestrahlung (1)
- Laserschneiden (1)
- Laserschweißen (1)
- Oberflächenstruktur (1)
- Piezoelektrizität (1)
Year of publication
- 2019 (9) (remove)
Document Type
- Article (5)
- Conference Proceeding (4)
Language
- English (9)
Microfluidic lab on chip systems require components to transport, mix, separate and analyse small volumes of different fluids. In this study, we report on the laser generation of internal hollow architectures created by focused 514 nm femtosecond laser pulses inside PMMA bulk material. Size and cross-sectional shape of a single internal generated microchannel are determined by the intensity distribution inside the focal voxel and can be controlled either by the numerical aperture of the focusing objective or by laser beam shaping. As both approaches are practically limited with respect to the realizable cross-sectional shapes, we present a process based on an internal hatching to expand the achievable channel cross-sections and thereby enable the possibility to create complex 3D shaped internal structures. This process is applied to create fully internal functional microfluidic elements such as mixers which are part of most polymer lab-on-chip systems.
Microneedle-based microfluidic systems have a great potential to become well-accepted medical devices for simple, accurate, and painless drug delivery and lab-on-a-chip diagnostics. In this work, we report on a novel hybrid approach combining femtosecond direct laser written microneedles with femtosecond laser generated microfluidic channels providing an important step towards versatile medical point-of-care systems. Hollow microneedle arrays are fabricated by a laser system designed for two-photon polymerization applications. Compression tests of two different types of truncated cone-shaped microneedle arrays prepared from OrmoComp® give information about the microneedle mechanical strength, and the results are compared to skin insertion forces. Three-dimensional microchannels are directly created inside PMMA bulk material by an ultrashort pulse laser system with vertical channels having adjustable cross-sectional areas, which allow attaching of microneedles to the microfluidic system. A comprehensive parameter study varying pulse duration and repetition rate is performed on two-photon polymerization to identify an optimal laser power range for fabricating microneedles using the same pulse duration and repetition rate as for microchannels. This addresses the advantage of a single laser system process that overcomes complex fabrication methods. A proof of concept flow test with a rhodamine B dye solution in distilled water demonstrates that the combination of microneedles and microchannels qualifies for microfluidic injection and extraction applications.
This paper presents an optimized laser-bonding process for piezoelectric energy-harvesters based on thin fluorinated-ethylene-propylene (FEP) foils, using an ultra-short-pulse(USP) laser. Due to the minimized thermal stress in the material during bonding, achieved bypulse durations of few picoseconds, we created seams down to 40μm width without generatingholes in the 12.5μm thick FEP-foils. Using a galvanometer scanning system allowed for fastbonding-speed up to several centimeters per second, making the process also suitable for largestructures and areas. The achieved bond strength of the seams under influence of shearingstress was examined using tensile testing, which showed a sufficient strength of about 25 % of the maximum strength of an unbonded, single layer of FEP.
This contribution discusses the integration of polymer planar Bragg grating sensors (PPBG) into carbon fiber reinforced polymer (CFRP) components. For the first time, it is shown that PPBGs based on cyclic olefin copolymers can be integrated into commercial-grade composites, thereby withstanding the demanding production processes. Pre-impregnated fibers are stacked and partially modified to form a sensor pocket. Afterwards, the CFRP specimen containing the optical sensor is cured in a heated mechanical press for 2 hours at a pressure of 7 bar and a temperature of 120 °C. A subsequent evalutaion of the sensor signal shows a Bragg wavelength shift of 1236 pm and a decline in signal amplitude of -2 dB. Three-point flexural tests of the cured sample reveal a linear behavior of the sensor signal towards external loads. The determined sensitivity in dependence of the CFRP specimen's maximum central deflection is -112 pm/mm, while correlation to the applied force results in a sensitivity of -5 pm/N.
The authors report on the laser generation of three-dimensional microchannel architectures with fundamentally unlimited channel length by focused 514 nm femtosecond laser pulses inside polymethylmethacrylate bulk material. The three-dimensional channel layout is implemented by moving the specimen using three-dimensional motorized stages, allowing freely chosen complex shaped channel architectures. Based on nonlinear absorption of high intensities around the focal volume, a material modification, including a refractive-index shift is triggered. After laser exposure, the channel is created by a gaseous degradation of exposed areas during an annealing process. Cross section and aspect ratio of thus generated microchannels are strongly influenced by the numerical aperture of the applied objective. To obtain a circular cross-sectional shape, high focusing objectives are necessary. In this report, the authors improve the existing setup by using an elliptical input beam, transforming the intensity distribution of the focal area in the propagation direction to a circular shape even for low and medium numerical aperture focusing objectives and therefore avoiding a small working distance as a limiting factor for processing depth. The elliptical input beam is obtained by insertion of a slit mask in front of the focusing objective. The ellipticity of the incident beam defines the aspect ratio of the generated microchannels. Furthermore, the size of internal microchannels is adjustable by varying laser and annealing process parameters.
In this contribution we report on the possibilities of dry and lubricated friction modification
introduced by different laser surface texturing methods. We compare the potential of Laser-Induced
Periodic Surface Structures and Laser Beam Interference Ablation on 100Cr6 steel in a linear
reciprocating ball-on-disc configuration using 100Cr6 steel and tungsten carbide balls with load
forces between 50mN and 1000 mN. For dry friction, we find a possibility to reduce the coefficient
of friction and we observe a pronounced direction dependency for surfaces fabricated by Laser
Beam Interference Ablation. Furthermore, Laser-Induced Periodic Surface Structures result in
a load-dependent friction reduction for lubricated linear reciprocating movements. This work helps
to identify the modification behaviour of laser generated micro structures with feature sizes of
approximately 1μm and reveals new possibilities for surface engineering
We report on the joining of two different transparent thermoplastic polymers using infrared femtosecond laser pulses. Solely being based on nonlinear absorption, the developed micro-welding process for cyclo-olefin copolymers and polycarbonate does not require any intermediate absorbing layers or any surface pre-processing of the welding partners. In addition, it circumvents any heat damages at the outer surfaces of the welding partners. Femtosecond laser welding of cyclo-olefin copolymers is improved by increasing the numerical aperture of the focusing setup resulting in a wider and more homogenous welding cross-section. Welding results are classified by shear strength and fracture modes are analyzed using scanning electron microscopy. Furthermore, we demonstrate, to the best of our knowledge, first results of ultrashort pulse laser welding of transparent polycarbonate, one of the most used transparent polymers. In view of an optimized and stable micro-welding process, we study the influence of laser power and focal position on welding results. The application of ultrashort pulse laser welding for Lab-on-chip fabrication technologies is demonstrated by sealing an ultrashort pulse laser ablated microfluidic device based on a transparent polymer substrate.