Refine
Document Type
- Doctoral thesis (2)
Has Fulltext
- yes (2)
Is part of the Bibliography
- no (2)
Keywords
- Siliciumcarbid (2) (remove)
Institute
Wachstumsphänomene und Stickstoffdotierung bei der Sublimationszüchtung von 6H-Siliciumcarbid
(2001)
Die Keimoberfläche ist durch das Vorhandensein einer Störschicht charakterisiert, die durch die mechanische Kristallbearbeitung hervorgerufen wird. Diese Schicht kann die Ursache für zusätzliche Defekte sein. Die Untersuchungen der Oberflächenmorphologie zeigen, daß ein Überschuß an Silicium im Quellmaterial notwendig ist, um ein defektfreies Wachstum in den ersten Stadien zu ermöglichen. Sowohl ein Oxidationsschritt vor dem Wachstum als auch die Anwendung von fehlorientierten Keimen führten nicht zum gewünschten Stufenfluß. Im Konzentrationsbereich von 1x10^18 <= c_N (cm^-3) <= 3x10^19 wurden 6H-SiC-Einkristalle gezüchtet, sowohl auf (0001)- als auch (000-1)-Keimen. Der Einbau von Stickstoff bewirkt das Absinken der Wachstumsgeschwindigkeit, was mit dem ''site-competition''-Modell erklärt werden kann. Die Sättigung der Stickstoffkonzentration im Kristall in Abhängigkeit vom N_2/Ar-Verhältnis konnte durch eine Langmuir-Isotherme beschrieben werden. Die Polarität der Keimoberfläche beeinflußt den Stickstoffeinbau. Die Stickstoffkonzentration im gewachsenen Kristall ist auf der C-terminierten Fläche ca. doppelt so hoch wie auf der Si-terminierten. Es wurde gezeigt, daß die Oberflächenmorphologie zusätzlich zur Keimpolarität den Stickstoffeinbau beeinflußt.
In this work, growth and characterisation of 3C-SiC thin films, investigation of oxidation of thus prepared layers and Pr-silicate and AlON based interface with SiC have been studied. Chemical vapor deposition of 3C-SiC thin films on Si(001) and Si(111) substrates has been investigated. Prior to the actual SiC growth, preparation of initial buffer layers of SiC was done. Using such a buffer layer, epitaxial growth of 3C-SiC has been achieved on Si(111) and Si(001) substrates. The temperature of 1100°C and 1150°C has been determined to be the optimal temperature for 3C-SiC growth on Si (111) and Si(001) substrates respectively. The oxidation studies on SiC revealed that a slow oxidation process at moderate temperatures in steps was useful in reducing and suppressing the g-C at the SiO2/SiC interface. Clean, graphitefree SiO2 has been successfully grown on 3C-SiC by silicon evaporation and UHV anneal. For the application of high-k Pr2O3 on silicon carbide, plausible interlayer, Pr-Silicate and AlON, have been investigated. Praseodymium silicate has been prepared successfully completely consuming the SiO2 and simultaneously suppressing the graphitic carbon formation. A comparatively more stable interlayer using AlON has been achieved. This interlayer mainly consists of stable phases of AlN along with some amount of Pr-aluminates and CN. Such layers act as a reaction barrier between Pr2O3 and SiC, and simultaneously provide higher band offsets.