Chemie und Prozesstechnik
Filtern
Erscheinungsjahr
- 2019 (73) (entfernen)
Dokumenttyp
Sprache
- Englisch (39)
- Deutsch (32)
- Mehrsprachig (1)
- Russisch (1)
Schlagworte
- Human Factors (9)
- NDT (7)
- Super resolution (7)
- Thermografie (7)
- Zerstörungsfreie Prüfung (7)
- Additive Fertigung (6)
- Laser thermography (6)
- Thermography (6)
- VCSEL array (6)
- Feuchte (5)
- Joint sparsity (5)
- Radar (5)
- Virtual wave (5)
- ZfP (5)
- 1d laser (4)
- Additive manufacturing (4)
- High-power laser (4)
- Künstliche Bewitterung (4)
- Laser array (4)
- Datenfusion (3)
- Industrielle Radiographie (3)
- Kunststoffe (3)
- Laminography (3)
- Laser Thermography (3)
- Neutronensonde (3)
- X-ray back scattering (3)
- ZfP 4.0 (3)
- Axle Inspection (2)
- Bildqualitätsnachweis (2)
- Compressed Sensing (2)
- Dimension reduction (2)
- Education (2)
- Failure Modes and Effects Analysis (2)
- Fiber reinforced polymer (2)
- Focal spot measurement (2)
- Fourier transform (2)
- Fußboden (2)
- International Institute of Welding (2)
- LIBS (2)
- NMR (2)
- Non-Destructive Testing (2)
- Nondestructive Testing (2)
- Photon counting detector (2)
- Pulsed thermography (2)
- Radiographie (2)
- Radiographische Prüfung (2)
- Railway (2)
- Reliability (2)
- Signalmerkmale (2)
- Super Resolution (2)
- Training (2)
- Ultrasonic Testing (2)
- VCSEL (2)
- Wind energy (2)
- X-Ray tube (2)
- 2D model (1)
- 3D Druck (1)
- 3D particle analysis (1)
- 3D visualization (1)
- Active thermography (1)
- Additive Manufacturing (1)
- Analytical model (1)
- Art restauration (1)
- Artificial weathering (1)
- Bauwesen (1)
- Beton (1)
- Bildqualität (1)
- Blind structured illumination (1)
- Brennfleckmessung (1)
- Building materials (1)
- Capillary suction (1)
- Cement (1)
- Chloride (1)
- Cold to fast neutron testing (1)
- Compressed sensing (1)
- Computed Radiography (1)
- Computed Tomography (1)
- Computed tomography (1)
- Computer-Tomographie (1)
- Computertomografie (1)
- Computertomographie (1)
- Concrete (1)
- Cracks (1)
- DGZfP-Richtlinien (1)
- Data Analysis (1)
- Data Processing (1)
- Data reconstruction (1)
- Datenanalyse (1)
- Delamination (1)
- Digital Industrial Radiology (1)
- Digitale Radiographie (1)
- Digitaler Filmersatz (1)
- Digitalisierung (1)
- Direktumwandelnde Detektoren (1)
- Dual Energy Imaging (1)
- Dual energy (1)
- Dual-Energy (1)
- Dual-energy (1)
- Energieauflösende Detektoren (1)
- Evaporative drying (1)
- FEM (1)
- Faseropische Sensorik (1)
- Filmersatz (1)
- Flat bottom holes (1)
- Flüssigwasser (1)
- GFRP (1)
- General Assembly (1)
- Glass paints (1)
- Heat diffusion (1)
- Heißluftquelle (1)
- Hygrometrie (1)
- Image Processing (1)
- KDA Training (1)
- Kalziumsilikat (1)
- Klassifizierung (1)
- Laminographie (1)
- Laser (1)
- Laser-Thermografie (1)
- Laserthermografie (1)
- Lehrplan Universität (1)
- MAPOD (1)
- MMI (1)
- Machine Learning (1)
- Maschinelles Lernen (1)
- Metal Magnetic Memory (1)
- Mikropartikel (1)
- Multiple Lineare Regression (1)
- NDE (1)
- NDT 4.0 (1)
- NMR relaxometry (1)
- Neutron Imaging (1)
- Non-destructive testing (1)
- Nondestructive tesing (1)
- Nondestructive testing (1)
- Normung (1)
- Notches (1)
- Nuklear magnetische Resonanz (1)
- Numerical modelling (1)
- Numerical simulation (1)
- Ontology (1)
- Opaque materials (1)
- Paper watermark (1)
- Personalzertifizierung (1)
- Personnel Education (1)
- Photon Counting Detectors (1)
- Photon counting detectors (1)
- Photonenzählende Detektoren (1)
- Photothermal (1)
- Polymere (1)
- Polymers (1)
- Pore size distribution (1)
- Porengrößenverteilung (1)
- Porous materials (1)
- Prediction from system parameters (1)
- Quantification (1)
- Radiografie (1)
- Radiographic Testing (1)
- Radiographic testing (1)
- Radiography (1)
- Radiography based weld inspection (1)
- Radsatzwellen (1)
- Relative Luftfeuchte (1)
- Repair patch (1)
- Requirements of Standards (1)
- Revision of ISO 24497 (1)
- Röntgenröhren (1)
- Röntgenrückstreuung (1)
- Sandstein (1)
- Sandstone (1)
- Sandstones (1)
- Saturation (1)
- Schichtaufbau (1)
- Semitransparent (1)
- Sensorik (1)
- Spectral induced polarization (1)
- Spectroscopy (1)
- Stained glass windows (1)
- Stand der Normung (1)
- Standadization (1)
- Standardisierung bei DIN, CEN und ISO (1)
- Standardization (1)
- Standards (1)
- Status in Germany (1)
- Structured heating (1)
- Sub-Commission V-A (1)
- Subsurface defects (1)
- Super-resolution imaging (1)
- Surface relaxivity (1)
- THz-TD-SAFT (1)
- THz-TDS (1)
- THz-Tommographie (1)
- TRISO (1)
- Thermal Waves (1)
- Thermal wave (1)
- Three-dimensional measurement (1)
- Tomographie, (1)
- Tomography of wood samples (1)
- Transportwesen (1)
- UT-Ausbildung (1)
- UV/VIS spectroscopy (1)
- Ultraschall (1)
- Virtuelle Welle (1)
- Visibility of Indications (1)
- Wavelet transformation (1)
- Wirbelstrom (1)
- X-ray (1)
- X-ray Radiography (1)
- Zeitaufgelöste THz-Spektroskopie (1)
- ZfP-Ausbildung (1)
- Zugprüfungen (1)
- additive manufacturing (1)
Organisationseinheit der BAM
- 8.0 Abteilungsleitung und andere (73) (entfernen)
Eingeladener Vortrag
- nein (43)
The separation of two closely spaced defects in fields of Thermographic NDE is very challenging. The diffusive nature of thermal waves leads to a fundamental limitation in spatial resolution. Therefore, super resolution image reconstruction can be used. A new concerted ansatz based on spatially structured heating and joint sparsity of the signal ensemble allows for an improved reconstruction of closely spaced defects. This new technique has been studied using a 1D laser array with randomly chosen illumination pattern.
This paper presents the results after applying super resolution algorithms, such as the iterative joint sparsity (IJOSP) algorithm, to our processed measurement data. Different data processing techniques before applying the IJOSP algorithm as well as the influence of regularization parameters in the data processing techniques are discussed. Moreover, the degradation of super resolution reconstruction goodness by the choice of experimental parameters such as laser line width or number of measurements is shown.
The application of the super resolution results in a spatial resolution enhancement of approximately a factor of four which leads to a better separation of two closely spaced defects.
In den letzten zwei Jahren wurden 11 neue Standards/Standardrevisionen zur RT veröffentlicht (ohne Strahlenschutz) und 5 werden dafür gestrichen. Es wird über die neuen Anforderungen ausgewählter Normen bzw. Normrevisionen informiert und insbesondere auch über die veränderten Parameter, die bei Prüfpraxis und bei der Klassifizierung zu berücksichtigen sind. Das wichtigste Projekt ist die Revision der DIN EN ISO 17636-1, -2, RT von Schweißverbindungen, in ISO TC 44 SC 5 WG 1. Die Standards zur Schweißnahtprüfung in der Kerntechnik, DIN 25435, wurden ins Englische übertragen und bei ISO TC 85 SC 6 bearbeitet. Hauptaktivität bei ASTM ist gegenwärtig die Überarbeitung der CT-Standards und die Berücksichtigung der Anforderungen an das dimensionelle Messen. Der Guide ASTM E 1441 zur Bestimmung von MTF, Kontrast-Detail-Funktion (CDF) und Kontrast-Diskrimination-Diagramm (CDD) wird revidiert. E 2445 zur CR Long Term Stability wird ebenfalls revidiert. Die Revision soll auch in die ISO 16371-1 eingehen. Dazu ist ein Round Robin-Test geplant. Auch die Standards zur Durchstrahlungsprüfung auf Korrosion und Ablagerungen in Rohren mit Röntgen- und Gammastrahlen (EN 16407-1, -2, 2014) wurden revidiert. Diese Revision wurde als DIN EN ISO 20769-1, -2 2018 veröffentlicht und EN 16407 wird zurückgezogen. Die Revision der Standards EN 12543 und EN 12679 zur Messung der Brennfleckgröße und der Strahlergröße ist mit Verzögerung in Überarbeitung, um die digitalen Detektoren und Messmöglichkeiten mit Bildverarbeitungsprogrammen zu berücksichtigen. Ein Entwurf zur Messung der Brennfleckgröße von nano-Fokusröhren wird derzeit vom Europäischen Metrologie-Programm EMPIR gefördert. Zur radiographischen Gussteilprüfung wurde der Standard EN 12681 revidiert und 2018 veröffentlicht. Er wurde um Zulässigkeitsgrenzen erweitert und die digitale Radiographie wurde in Teil 2 berücksichtigt.
This international symposium is devoted to promote a broad exchange of information on technologies, applications and quality assurance in the area of digital industrial radiology and computed tomography. The meeting provides a unique opportunity for users, scientists, equipment suppliers and all who are interested to discuss the present and future possibilities for industrial applications of the following topics:
- Xray detectors and sources
- Image processing algorithms
- Quantitative imaging
- Defect detection & localisation
- Feature extraction
- Dimensional control
- CT, multi-angle - radiography
- Laminography & Tomosynthesis
- Modelling
- Film replacement
- Phase contrast
- Multi-energies and photon counting
- Other radiation techniques (e.g. - neutrons)
- Multi-techniques fusion
- Standardisation
- Qualification & system reliability
- Inspection for Additive Manufacturing
- Scattering
The revision of ISO 24497:2007 started in 2017 (by decision of Com-V at the IIW annual assembly in Shanghai). After 3 years of discussions and incorporation of many comments from all over the world the working group C-V-E-b headed by Uwe Zscherpel finalized the work with a final draft to be forwarded for final vote at ISO TC 44. The working group C-V-E-b finalised the work and can be resolved. The chair thanks for all the successfully work done, the vote to forward the latest draft to ISO for final vote was done without any negative.
X-ray back scatter imaging is rarely applied compared to classical X-ray projection imaging. 20 years ago the company Philips developed “COMSCAN”, a first application case in the aircraft industry, which allowed even a depth resolution using back scatter imaging. The company AS&E in Boston offers back scatter imaging solutions for the security market. Their principle is to scan the object with a highly collimated X-ray needle beam from one side only and detect the backscattered radiation by a large area detector side by side with the collimation wheel. A new prototype is investigated at BAM for application and optimization in non-destructive testing. As modern industrial application field in-situ testing in additive manufacturing is targeted. The accessibility of the printed part during the production process is very limited. This prevent the application of a two sided X-ray inspection or Computed Tomography, were an rotation of the object is required to acquire projections from 360 degrees. An important advantage for the X-ray back scatter technique are also the materials used in additive manufacturing (polymers, ceramics, light metals like Aluminum or Titanium). These materials with lower density and lower Z values give better scatter signals than metals with higher densities and Z values. The back scatter intensity decreases with increasing density and Z value of the material. But the requirements on spatial resolution and contrast sensitivity are more stringent for non-destructive testing of additive manufactured parts compared to the security area. In NDT sizes of indications smaller than 1 mm have to be detected clearly. The investigation of these limits on a stateof-the-art prototype for X-ray back scattering using rotating collimated X-ray needle beams is a part of the BAM project “ProMoAM”. The contribution shows first results of the optimization for NDT and the achieved application limits for several example cases.
While the absorption of X-rays and gamma radiation is determined by the Z-number of the elements a specimen is composed of, it is the hydrogen making an effective contrast with neutron imaging. As a consequence, interrogating with neutrons presents a suitable tool to study the distribution of organic consolidants in materials such as wood as encountered in impregnated wooden artworks.
Four different examples of objects are presented here to demonstrate the potential of neutron CT: 1) small wooden pieces of ship wrecks (< 2 cm thickness) interrogated with cold neutrons (0.5 meV at the ANTARES facility of the FRM II in Garching) to demonstrate the potential and the limitation of using low energy neutrons, 2) a wooden statue soaked with carbolineum (fission neutrons 1.8 MeV at the NECTAR facility of the FRM II), 3) a smaller wooden figure of a skull heavily soaked with carbolineum so it was too tight for the fission neutrons used before with accelerator neutrons (broad range about 5.5 MeV at the PTB in Braunschweig) and 4) pieces of charred wood to study the impregnation with a consolidant (NECTAR, FRM II). With the exception of the last example, all results have been combined with X-ray tomography (BAM 8.3 in Berlin). In the case of the charred wood specimens (example 4) the density histograms of the neutron tomography results were compared with those obtained from untreated references. The observed gain in specific density of the soaked specimens corresponded with an increase of specific weight. All results obtained so far showed distinct distribution patterns attributable to structural peculiarities or organic consolidants providing valuable support for subsequent restoration works.
X-ray back scatter imaging is rarely applied compared to classical X-ray projection imaging. 20 years ago the company Philips developed “COMSCAN”, a first application case in the aircraft industry, which allowed even a depth resolution using back scatter imaging. The company AS&E in Boston offers back scatter imaging solutions for the security market. Their principle is to scan the object with a highly collimated X-ray needle beam from one side only and detect the backscattered radiation by a large area detector side by side with the collimation wheel. A new prototype is investigated at BAM for application and optimization in non-destructive testing. As modern industrial application field in-situ testing in additive manufacturing is targeted. The accessibility of the printed part during the production process is very limited. This prevent the application of a two sided X-ray inspection or Computed Tomography, were an rotation of the object is required to acquire projections from 360 degrees. An important advantage for the X-ray back scatter technique are also the materials used in additive manufacturing (polymers, ceramics, light metals like Aluminum or Titanium). These materials with lower density and lower Z values give better scatter signals than metals with higher densities and Z values. The back scatter intensity decreases with increasing density and Z value of the material. But the requirements on spatial resolution and contrast sensitivity are more stringent for non-destructive testing of additive manufactured parts compared to the security area. In NDT sizes of indications smaller than 1 mm have to be detected clearly. The investigation of these limits on a stateof-the-art prototype for X-ray back scattering using rotating collimated X-ray needle beams is a part of the BAM project “ProMoAM”. The contribution shows first results of the optimization for NDT and the achieved application limits for several example cases.
In den letzten zwei Jahren wurden 11 neue Standards/Standardrevisionen zur RT veröffentlicht (ohne Strahlenschutz) und 5 werden dafür gestrichen. Es wird über die neuen Anforderungen ausgewählter Normen bzw. Normrevisionen informiert und insbesondere auch über die veränderten Parameter, die bei Prüfpraxis und bei der Klassifizierung zu berücksichtigen sind. Das wichtigste Projekt ist die Revision der DIN EN ISO 17636-1, -2, RT von Schweißverbindungen, in ISO TC 44 SC 5 WG 1. Die Standards zur Schweißnahtprüfung in der Kerntechnik, DIN 25435, wurden ins Englische übertragen und bei ISO TC 85 SC 6 bearbeitet. Hauptaktivität bei ASTM ist gegenwärtig die Überarbeitung der CT-Standards und die Berücksichtigung der Anforderungen an das dimensionelle Messen. Der Guide ASTM E 1441 zur Bestimmung von MTF, Kontrast-Detail-Funktion (CDF) und Kontrast-Diskrimination-Diagramm (CDD) wird revidiert. E 2445 zur CR Long Term Stability wird ebenfalls revidiert. Die Revision soll auch in die ISO 16371-1 eingehen. Dazu ist ein Round Robin-Test geplant. Auch die Standards zur Durchstrahlungsprüfung auf Korrosion und Ablagerungen in Rohren mit Röntgen- und Gammastrahlen (EN 16407-1, -2, 2014) wurden revidiert. Diese Revision wurde als DIN EN ISO 20769-1, -2 2018 veröffentlicht und EN 16407 wird zurückgezogen. Die Revision der Standards EN 12543 und EN 12679 zur Messung der Brennfleckgröße und der Strahlergröße ist mit Verzögerung in Überarbeitung, um die digitalen Detektoren und Messmöglichkeiten mit Bildverarbeitungsprogrammen zu berücksichtigen. Ein Entwurf zur Messung der Brennfleckgröße von nano-Fokusröhren wird derzeit vom Europäischen Metrologie-Programm EMPIR gefördert. Zur radiographischen Gussteilprüfung wurde der Standard EN 12681 revidiert und 2018 veröffentlicht. Er wurde um Zulässigkeitsgrenzen erweitert und die digitale Radiographie wurde in Teil 2 berücksichtigt.
Die Technologie der hybriden Teilchen (oder Photonen) zählenden Bilddetektoren wurde seit mehr als 2 Jahrzehnten durch Institutionen wie das CERN (MediPix-/ TimePix-Chips) oder das Paul-Scherrer-Institut (Pilatus-/ Eiger-Chips) entwickelt. Die Ursprünge dieser Technologie kommen aus der Hochenergie-Physik mit ihren Beschleuniger-basierten Experimenten, bei denen ein zuverlässiger und rauschfreier Nachweis jedes ionisierten Teilchens gefordert wird. Eine Energieauflösung wird ebenfalls oft verlangr. Das ist auch in der klassischen Radiographie von Nutzen, so wurden diese Detektoren auch dafür optimiert. Neueste Photonen zählenden Detektoren besitzen folgende exzellenten Bildeigenschaften: rauschfreie Photonen-Detektion in einem hohen Dynamikbereich (SNR >2500 erreichbar), hohe räumliche Auflösung (bis zu 10 µm Pixelgröße), Energieschwellen bis zur vollen spektralen Auflösung und eine sehr hohe Geschwindigkeit (bis zu Tausenden Bildern pro Sekunde). Diese hybriden Detektoren können mit hochabsorbierenden Sensorschichten aus CdTe, CZT oder GaAs bestückt werden, um bildgebende Anwendungen mit Gamma- oder harten Röntgenstrahlen zu realisieren, in denen bisher Szintillator basierende Bilddetektoren dominierten (z.B. für NDT, SPECT, PET). Im Beitrag wird der erste wirklich große Photonen zählende Detektor mit CdTe und einer lückenlosen Detektionsfläche, die aus einer theoretisch unbegrenzten Anzahl von MediPix-/ TimePix-Modulen besteht, gezeigt. Die erste kommerzielle Version eines solchen Detektors hat eine Fläche von 7cm x7cm, 1,6 Megapixel und erfüllt die Anforderungen der Prüfklasse „B“ in der industriellen Radiographie. Die Energie auflösenden Fähigkeiten dieses Detektors erlauben eine „Farb-Radiographie“, in der verschiedene Materialien in verschiedene Farben dargestellt werden. Der 2. Teil dieses Beitrags stellt einen voll spektral auflösenden Gamma- und Röntgen-Bilddetektor mit dickem CdTe und 2,4 Megapixel vor, der auf TimePix3-Chips basiert und eine sehr hohe Ortsauflösung von ~10 µm erreicht. Die hohe Zeitauflösung von TimePix3 wird mit großem Nutzen für eine substantielle Verbesserung der erhaltenen Bilder und Spektren zur Unterdrückung interner Fluoreszenzstrahlung sowie Comptonstreuungsanteilen, die die Bildinformation verschmieren, verwendet.