4 Material und Umwelt
Filtern
Dokumenttyp
- Vortrag (275) (entfernen)
Sprache
- Englisch (275) (entfernen)
Referierte Publikation
- nein (275)
Schlagworte
- Biocides (20)
- Antimicrobial resistance (19)
- Ink (14)
- Biofilms (12)
- MIC (10)
- Antimicrobial coating (9)
- Bacteria (9)
- Corrosion (9)
- Recycling (9)
- Evolution (8)
- XRF (8)
- Microbiologically influenced corrosion (7)
- PFAS (7)
- Phosphorus recovery (7)
- Risk assessment (7)
- Standardization (7)
- Black fungi (6)
- E. coli (6)
- Manuscript (6)
- Methanogens (6)
- Nano (6)
- Per- and Polyfluoroalkyl substances (PFAS) (6)
- Sewage sludge (6)
- Soil (6)
- Termite (6)
- VOC (6)
- BOFS (5)
- Disinfection (5)
- Genetics (5)
- Hydraulic reactivity (5)
- Indoor air quality (5)
- NAP-XPS (5)
- Tolerance (5)
- XANES spectroscopy (5)
- Aerosol (4)
- Alginate (4)
- Archaeometry (4)
- Biocide (4)
- Cascade impactor (4)
- Ecotoxicity (4)
- Emission reference materials (4)
- Fungus (4)
- Inks (4)
- Leaching (4)
- Manuscripts (4)
- Melanin (4)
- OECD (4)
- Phosphorus (4)
- Pigments (4)
- TXRF (4)
- X-ray absorption near-edge structure (XANES) spectroscopy (4)
- Antibiotics (3)
- Archaea (3)
- Carbon Fibers (3)
- Carbon steel (3)
- Combustion ion chromatography (3)
- Coptic (3)
- Cultural heritage (3)
- Environmental simulation (3)
- Fertilizer (3)
- Glutaraldehyde (3)
- Gypsum (3)
- HP14 (3)
- Heterogeneity (3)
- Immune gene family (3)
- Immunity (3)
- Ink analyses (3)
- Iron-gall ink (3)
- Knufia petricola (3)
- Light (3)
- Material science (3)
- Materials emissions test (3)
- Mechanochemical treatment (3)
- Methanogen (3)
- Methanogen-induced microbiologically influenced corrosion (3)
- Microbiology (3)
- Nanomaterial (3)
- Non destructive analytical techniques (3)
- Phenotypic diversity (3)
- Pigment (3)
- Portland Cement (3)
- Pyrometallurgy (3)
- Raman spectroscopy (3)
- Recycling materials (3)
- Resistance (3)
- Reverse glass painting (3)
- Spectroscopy (3)
- Sulfate reducing bacteria (3)
- Test guideline (3)
- Virus (3)
- XRF analysis (3)
- 3D printing (2)
- Air quality monitoring (2)
- Analytical method (2)
- Antimicrobial surfaces (2)
- Arabic Recipes (2)
- Architecture (2)
- BEMMA (2)
- Bauxite Residue (2)
- Bio-weathering (2)
- Biocide tolerance (2)
- Biofilm (2)
- Black fungus (2)
- CDW processing (2)
- CFK (2)
- CSMC (2)
- Cabonfasern (2)
- Cairo Genizah (2)
- Chemical analysis (2)
- Chemical durability (2)
- Chinese paper (2)
- Combustion Ion Chromatography (2)
- Construction products (2)
- Corrosion products (2)
- Cross-resistance (2)
- DRIFTS (2)
- Diffusive gradients in thin-films (DGT) (2)
- Disinfectants (2)
- EN 16516 (2)
- Electric Arc Furnace (2)
- Elektroofenstaub (2)
- Element mass concentration (2)
- Emerging (2)
- Emission (2)
- Emission reference material (2)
- Environmental Simulation (2)
- Environmental evaluation (2)
- Eusociality (2)
- Extremotolerance (2)
- FFF-3D-Printer (2)
- Fungal biofilms (2)
- Fungi (2)
- Genomics (2)
- Geosynthetics (2)
- Gichtgasschlamm (2)
- Glass (2)
- Group defence (2)
- Horizontal gene transfer (2)
- Humboldt Codices (2)
- Hydrogen (2)
- ICP-MS (2)
- ISO 16000-6 (2)
- In-situ analysis (2)
- Ink composition (2)
- Inkwells (2)
- Interdisciplinary (2)
- Knufia (2)
- Korrosion (2)
- Laser-induced periodic surface structures (LIPSS) (2)
- Low melting (2)
- Manuscript studies (2)
- Metabolism (2)
- Microbial (2)
- Middle Ages (2)
- Modelling studies (2)
- Museum (2)
- Museum Pests (2)
- Mutation rate (2)
- Nanomaterials (2)
- Olivine (2)
- Papyrus (2)
- Particles (2)
- Particulate emission (2)
- Pathogen (2)
- Persian manuscripts (2)
- Phopshorus recovery (2)
- Pollutants (2)
- Recycling fertiliser (2)
- Recycling fertilisers (2)
- Red Mud (2)
- Reference material (2)
- Remediation (2)
- Ressourcenrückgewinnung (2)
- Robustness studies (2)
- Sc-ICP-ToF-MS (2)
- Scandium (2)
- Sewage sludge ordinance (2)
- Single cell analysis (2)
- Size (2)
- Solar panel (2)
- Standardisation (2)
- Steelmaking (2)
- Stress (2)
- Tantalum (2)
- Termite phylogeny (2)
- Total reflection X-ray spectroscopy (2)
- Transformation (2)
- UV radiation (2)
- Ultrafine particles (2)
- VVOCs (2)
- Volatile organic compounds (2)
- Waste management (2)
- Weathering (2)
- XANES (2)
- XPS (2)
- Zink (2)
- melanin (2)
- 3D Printing (1)
- 3D inspection (1)
- AMR (1)
- ASAP-MS (1)
- ATR (1)
- Academia (1)
- Additive Manufacturing (1)
- Additive Manufacturing (AM) (1)
- Additive manufacturing (1)
- Adipokinetic hormone (1)
- Adipokinetic hormone receptor (1)
- Aerosol measurements (1)
- Aerosol spectroscopy (1)
- Agarose (1)
- Ageing (1)
- Aging test (1)
- Air quality (1)
- Airborne Particles (1)
- Alite (1)
- Alite hydraulic reactivity (1)
- Alkali zinc borate glass (1)
- Ambient aerosol (1)
- Ambient aerosols (1)
- Ambient air (1)
- Ambient air pollution (1)
- Ammonium (1)
- Analytical chemistry (1)
- Ancient INKS (1)
- Anobium punctatum (1)
- Anoxia (1)
- Antibiotic (1)
- Antimicrobial Resistance (1)
- Antimicrobials (1)
- Apanteles carpatus (1)
- Arabic recipes (1)
- Ascomycetes (1)
- Ashdec (1)
- Autoclave tests (1)
- BODIPY dye (1)
- Bacteria repellent surfaces (1)
- Bacterial adhesion (1)
- Bacterial adhesion tests (1)
- Bacterial attachment (1)
- Bacterial infection (1)
- Bagasse (1)
- Baryscapus tineivorus (1)
- Bassanite (1)
- Bee (1)
- Bees (1)
- Beständigkeit (1)
- Biodiversity (1)
- Biofilm formation (1)
- Biofilm growth (1)
- Bioilm (1)
- Bioinformatics (1)
- Biological Control (1)
- Biosphere-technosphere interaction (1)
- Black Ink (1)
- Blast furnace sludge (1)
- Blattodea (1)
- Blue Angel ecolabel (1)
- Botrytis (1)
- Botrytis cinerea (1)
- Bottom ash (1)
- Building products (1)
- CFRP (1)
- CIC (1)
- CO2 assisted impregnation (1)
- COST Action (1)
- CRM (1)
- Calcium silicate (1)
- Calcium sulfate (1)
- Calibration (1)
- Carbide formation (1)
- Carbon feeding (1)
- Carbon ink (1)
- Carbon steel corrosion (1)
- Carotenoids (1)
- Cast iron (1)
- Characterization (1)
- Chemical characterization (1)
- Chemical composition (1)
- Chinese Paper (1)
- Chromium (1)
- Clinker substitute (1)
- Coastal protection (1)
- Cockroach (1)
- Codicology (1)
- Conditioning layer (1)
- Construction Products (1)
- Construction and demolition waste (1)
- Consumer products (1)
- Contamination (1)
- Controllable gene expression (1)
- Controlled release fertilisers (1)
- Core/shell nanoparticle (1)
- Corrosion product (1)
- Corynetes caeruleus (1)
- Crispr/Cas9 (1)
- Cultural Entomology (1)
- Cultural Heritage (1)
- Culuative energy demand (1)
- DGT (1)
- Dead Sea Scrolls (1)
- Deponie (1)
- Deponiebau (1)
- Desiccation (1)
- Design of experiments (1)
- Diffusive Gradients in thin films (DGT) (1)
- Diffusive sampling (1)
- Digitalisation (1)
- Disease (1)
- Dispay case (1)
- Display case (1)
- Drawing (1)
- Drawings (1)
- Dyes (1)
- E$volution (1)
- EOF (1)
- EOF/AOF (1)
- EU EMPIR (1)
- EU regulations (1)
- Ecology (1)
- Ectoine (1)
- Edible insects (1)
- Effective uptake rate (1)
- Efflux (1)
- Electric arc furnace dust (1)
- Electron microscopy (1)
- Element analysis (1)
- Element mass concetration (1)
- Emerging Contaminants (1)
- Emission Test Chamber (1)
- Emission Testing (1)
- Emission chambers (1)
- Emission test chamber (1)
- Emission test chamber procedure (1)
- Emission testing (1)
- Emissions (1)
- Emissions of hazardous gases (1)
- Emisson testing (1)
- Enamel colors (1)
- Environmental friendly (1)
- European research area (1)
- Exposure risk (1)
- Extreme environments (1)
- Extremophilic fungi (1)
- FEM model (1)
- FIB/SEM (1)
- FTIR (1)
- FTIR spectroscopy (1)
- Feeding behaviour (1)
- Fibre analysis (1)
- Filament comparison (1)
- Flow Model (1)
- Flow system (1)
- Flow-system (1)
- Fluor XANES (1)
- Fluorescence (1)
- Fluorometric sensing (1)
- Formaldehyde (1)
- Fume (1)
- Gas chromatography (1)
- Gas sensing (1)
- Gas storage (1)
- Gene network (1)
- Genetic tools (1)
- Genome editing (1)
- Geogitter (1)
- Geokunststoffe (1)
- Glass scanning (1)
- Gold (1)
- Green pesticide (1)
- Greenhouse gas balance (1)
- Gut microbiota (1)
- HAXPES (1)
- HI-Tension (1)
- HR-CS-GFMAS (1)
- Heavy metal removal (1)
- Herculaneum (1)
- Historic ink (1)
- Horizontal gene transfer HGT (1)
- Hylotrupes bajulus (1)
- ISO/TC 229 Nanotechnologies (1)
- Illness-induced anorexia (1)
- In situ (1)
- Incineration bottom ash (1)
- Indoor Air Quality (1)
- Indoor Products (1)
- Indoor emission (1)
- Industrial applications (1)
- Infrared spectroscopy (1)
- Initial attachment (1)
- Ink terminology (1)
- Integrated Museum Pest Management (IMPM) (1)
- Ionizing radiation (1)
- Ir DNA staining approach (1)
- Iron oxide nanoparticles (1)
- Jewish cultures (1)
- Kunststoffdichtungsbahnen (1)
- Lake Cadagno (1)
- Laser Powder Bed Fusion (L-PBF) (1)
- Laser Printer (1)
- Laser processing (1)
- Laser-induced breakdown spectroscopy (1)
- Laser-induced periodic surface structueres (LIPPS) (1)
- Leather (1)
- Light regulation (1)
- Light sensing (1)
- Light-induced stress (1)
- Lightning talk (1)
- Lightweighting (1)
- Low cost aerosol PM sensor (1)
- Lysimeter, Antimony (1)
- MIC Island (1)
- MSWI bottom ash (1)
- Marble (1)
- Market surveillance (1)
- Mass spectroscopy (1)
- Material emissions testing (1)
- Material surface colonisation (1)
- Materials emissions testing (1)
- Materials flow (1)
- Melanins (1)
- Metal reducing bacteria (1)
- Metallic silver precipitates (1)
- Metalls (1)
- Metals (1)
- Methanogenesis (1)
- Method development (1)
- Microbial communities (1)
- Microbiological influenced corrosion MIC (1)
- Microbiologically influenced corrosion (MIC) (1)
- Microorganism (1)
- Migration (1)
- Mikrobiell (1)
- Mikrobiell beeinflusste Korrosion (1)
- Mineral weathering (1)
- Mircobially influcenced corrosion (1)
- Model (1)
- Model organism (1)
- Modelling (1)
- Molecular (1)
- Mutagenesis (1)
- NDT (1)
- NFDI (1)
- NIR reflectography (1)
- Nano characterization (1)
- Nano particle (1)
- Nano@BAM (1)
- NanoSIMS (1)
- Nanocarrier (1)
- Nanoparticle (1)
- Nanoparticles (1)
- Nanopartikel (1)
- Nanoplattform (1)
- Nanorods (1)
- Neuropeptide (1)
- Nitrate (1)
- Nitrogen (1)
- Non-destructiv testing (1)
- Non-destructive testing (1)
- Nostoc (1)
- Novel sample preparation techniques (1)
- Nuclear waste disposal (1)
- Nutrient (1)
- Office machines (1)
- Operating Procedure (1)
- Optical properties (1)
- Ordinance on Contaminated Sites and Soil Protection (1)
- P-recovery (1)
- PAH (1)
- PE-HD (1)
- PFAS analysis (1)
- PFAS analytics (1)
- PM (1)
- Paints (1)
- Paper (1)
- Paper tinting (1)
- Parchment (1)
- Particle (1)
- Particle Size (1)
- Particle gas emission (1)
- Particle size (1)
- Particulate emissions (1)
- Partikeln (1)
- Passive sampling (1)
- Perfluorierte Verbindungen (1)
- Performance comparison (1)
- Persian manuscript (1)
- Persistence (1)
- Phase separation (1)
- Photoperception (1)
- Phototrophic bacteria (1)
- Plasma (1)
- Plastic biofilm (1)
- Plastic pollution (1)
- Plume (1)
- Polymer foils (1)
- Preferential binding (1)
- Process control (1)
- Process monitoring (1)
- Proteomics (1)
- Push-out Test (1)
- Quality assurance (1)
- Quality assurance/quality control (1)
- Quantum dot (1)
- REACH (1)
- Raman (1)
- Recovery (1)
- Red chalk (1)
- Reduction (1)
- Reduction process (1)
- Reference data (1)
- Reference materials (1)
- Reference method (1)
- Reference procedures (1)
- Reflectography (1)
- Release kinetics (1)
- Rembrandt (1)
- Resistance evolution (1)
- Restoration and conservation (1)
- Rock-inhabiting black fungi (1)
- Rock-inhabiting fungus (1)
- Round robin test (1)
- SC-ICP-ToF-MS (1)
- SEM-EDS (1)
- SERS (1)
- SOP (1)
- SRB (1)
- Sanierung (1)
- Scattering (1)
- Secondary Recources (1)
- Secondary building materials (1)
- Secondary metabolism (1)
- Secondary resources (1)
- Sediment (1)
- Selective chlorination (1)
- Sewage sludge ash (1)
- Sewage sludge incineration (1)
- Silver diffusion (1)
- Single cell (1)
- Size distribution (1)
- Size resolved chemical composition (1)
- Smartphone (1)
- Social (1)
- Social immunity (1)
- Soil P species (1)
- Soil-like material (1)
- Soil-like materials (1)
- Solar parks (1)
- Spatter (1)
- Stained glass (1)
- Stainless steel (1)
- Stakeholder (1)
- Steelmaking slag (1)
- Stress tolerance (1)
- Structured light scanning (1)
- Subaerial biofilm (1)
- Sum parameter analysis (1)
- Surface chemistry (1)
- Surface functionalization (1)
- Sustainability (1)
- Synchotron (1)
- Tanning (1)
- Termites (1)
- Test Guideline (1)
- Test method (1)
- Test strip (1)
- Teststreifen (1)
- Thermal Desorption (1)
- Thermal Extraction (1)
- Thermal desorption (1)
- Thermal imaging (1)
- Thermal properties (1)
- Thermal treatment (1)
- Thermoplastic filaments (1)
- Time resolved chemical composition (1)
- Tineola bisselliella (1)
- Tinting (1)
- ToF SIMS (1)
- ToF-SIMS (1)
- Tomography (1)
- Torah Scrolls (1)
- Trait-based ecology (1)
- Transposon (1)
- UFP (1)
- UV absorption (1)
- UV protection (1)
- UV tolerance (1)
- UV-VIS Reflectance spectroscopy (1)
- UV-VIS reflectance spectroscopy (1)
- UV-irradiation (1)
- Utilization (1)
- VAMAS (1)
- VIS (1)
- VOC Emission (1)
- VOC transfer standards (1)
- VOC-emission (1)
- Virulence (1)
- Volatile organic compounds (VOC) (1)
- Vues des Cordillères (1)
- WKI flask method (1)
- Waste water treatment (1)
- Wastewater (1)
- Weathering tests (1)
- Wooden toys (1)
- X-Ray fluorescence (1)
- X-Ray fluorescence analyses (1)
- X-ray diffraction (1)
- X-ray spectroscopic techniques (1)
- XRF-, VIS- FTIR-spectroscopy (1)
- Zinc (1)
- black fungus (1)
- carotenoids (1)
- fungus (1)
- genetics (1)
- historic inks (1)
- individual-based modelling (1)
- infrared spectroscopy (1)
- multi scale testing (1)
- pigmentation (1)
Organisationseinheit der BAM
- 4 Material und Umwelt (275) (entfernen)
Volatile organic compounds (VOCs) emitted by furniture and building materials can cause health issues. For an improvement of indoor air quality low emitting materials should be used. Quality assurance and –control (QA/QC) measures require an emission reference material (ERM) with a predictable emission rate of VOCs. The idea is to use porous materials as ERM, which store the VOCs inside their pores and emit them constantly.
Sunlight is an almost unavoidable environmental cue and plays a fundamental role in the biology of pro- and eukaryotic organisms. To cope with sunlight-associated stresses e.g., high temperatures, UV radiation with associated DNA damage, accumulation of reactive oxygen species (ROS), desiccation and osmotic stresses, it is important for organisms to accurately sense and respond to changes in light. The benefits of light are obvious for green organisms such as cyanobacteria, algae and plants which use light as an energy source (photosynthesis). Less apparent are other light-dependent processes such as light-driven DNA repair by photolyases (photoreactivation) or ion pumping by microbial opsins. Fungi that can share light-flooded habitats with phototrophs may profit from their excess photosynthetic products. Rock-inhabiting Dothideomycetes and Eurotiomycetes including Knufia petricola possess many proteins for absorbing UV/blue, green, red and far-red light, produce the black 1,8 dihydroxynaphthalene (DHN) melanin and orange-red carotenoids, and may live in multispecies biofilms. Here, we are addressing the question to which extent constitutive pigment formation (melanin and carotenoids) and responses mediated by the stress-activated mitogen-activated protein (MAP) kinase contribute to the observed light (UV-B) tolerance of K. petricola.
Sunlight is an almost unavoidable environmental cue and plays a fundamental role in the biology of pro- and eukaryotic organisms. To cope with sunlight-associated stresses e.g., high temperatures, UV radiation, accumulation of reactive oxygen species, desiccation, and osmotic stress, it is important for organisms to accurately sense and respond to changes in light. The benefits of light are obvious for green organisms such as cyanobacteria, algae and plants which use light as an energy source (photosynthesis). Fungi that can share light-flooded habitats with phototrophs may profit from their excess photosynthetic products. Examples are the plant pathogen Botrytis cinerea, the gray mold fungus, and the rock inhabitant Knufia petricola, a microcolonial black fungus which forms multispecies biofilms with bacteria and algae.
Calcium sulfate hemihydrate (CaSO4ᐧ0.5H2O), also known as bassanite, has been used as a precursor to produce gypsum (dihydrate, CaSO4ᐧ2H2O) for various construction and decorative purposes since prehistoric times. The main route to obtain hemihydrate is a thermal treatment of gypsum at temperatures typically between 150 °C and 200 °C to remove some of the structural water.
In this contribution, we introduce (Fig. 1) a more efficient and sustainable method (T < 100 °C) that enables the direct, rapid, and reversibly conversion of gypsum to bassanite using reusable high salinity aqueous solutions (brines with c[NaCl] > 4 M). The optimum conditions for the efficientproduction of bassanite in a short time (< 5 min) involve the use of brines with c(NaCl) > 4 M and maintaining a temperature, T > 80 °C. When the solution containing bassanite crystals is cooled down to around room temperature, eventually gypsum is formed. When the temperature is raised again to T > 80 °C, bassanite is rapidly re-precipitated. This contrasts with the typical behaviour of the bassanite phase in low salt environments.
Traditionally, hemihydrate is obtained through a solid state thermal treatment because bassanite is considered to be metastable with respect to gypsum and anhydrite in aqueous solutions, and therefore gypsum-to-bassanite conversion should not occur in water. Its very occurrence actually contradicts numerical thermodynamic predictions regarding solubility of calcium sulfate phases. By following the evolution of crystalline phases with in situ and time-resolved X-ray diffraction/scattering and Raman spectroscopy, we demonstrated that the phase stability in brines at elevated temperatures is inaccurately represented in the thermodynamic databases. Most notably for c(NaCl) > 4 M, and T > 80 °C gypsum becomes readily more soluble than bassanite, which induces the direct precipitation of the latter from gypsum. The fact that these transformations are controlled by the solution provides extensive opportunities for precise manipulation of crystal formation. Our experiments confirmed that bassanite remained the sole crystalline structure for many hours before reverting into gypsum. This property is extremely advantageous for practical processing and efficient crystal extraction in industrial scenarios.
In industrialised countries more than 80% of the time is spent indoors. Products, such as building materials and furniture, emit volatile organic compounds (VOCs), which are therefore ubiquitous in indoor air. VOC in combination may, under certain environmental and occupational conditions, result in reported sensory irritation and health complaints. Emission concentrations can become further elevated in new or refurbished buildings where the rate of air exchange with fresh ambient air may be limited due to improved energy saving aspects. A healthy indoor environment can be achieved by controlling the sources and by eliminating or limiting the release of harmful substances into the air. One way is to use (building) materials proved to be low emitting. Meanwhile, a worldwide network of professional commercial and non-commercial laboratories performing emission tests for the evaluation of products for interior use has been established. Therefore, comparability of test results must be ensured. A laboratory’s proficiency can be proven by internal and external validation measures that both include the application of suitable emission reference materials (ERM). For the emission test chamber procedure according to EN 16516, no artificial ERM is commercially available. The EU-funded EMPIR project MetrIAQ aims to fill this gap by developing new and improved ERMs. The goal is to obtain a material with a reproducible and temporally constant compound release (less than 10 % variability over 14 days). Two approaches were tested: the impregnation of porous materials with VOC, and the encapsulation of VOC in polymer microcapsules. Impregnation is performed with help of an autoclave and supercritical CO2. The encapsulation is done by interfacial polymerisation on VOC droplets. For both approaches, synthesis and/or material parameters were varied to obtain an optimal ERM. Findings about the optimisation of ERM generation, as well as performance of the best emission reference materials, will be presented.
Per- and polyfluoroalkyl substances (PFAS) are a large group of more than 10,000 anionic, cationic, zwitterionic or neutral organofluorine surfactants. As a result of continuous and prolific use, mainly in aviation firefighting foams, thousands of industrial and military installations have been found to contain contaminated soil, groundwater and surface water. While liquid chromatography tandem mass spectrometry (LC-MS/MS) is commonly used technique to characterize targeted PFAS in environmental samples, there are more than 10,000 different PFAS known, which have various headgroups and properties. Therefore, several analytical techniques are available to analyse various groups or pools of PFAS or “all” PFAS as a sum parameter. Current decontamination strategies of PFAS-burdened soils mainly consist of adsorption methods using adsorbents for fixation of PFAS in the ground. A second option is the utilization of a “pump and treat” process, cycling polluted soils through a washing plant leading to the concentration of the pollutants in the fine fraction. Both approaches are cost-intensive and not intended for the direct decomposition of all PFAS contaminants. Hence, there is a great demand for innovative developments and chemical treatment technologies, dealing with new strategies of tackling the PFAS problem. Previously, mechanochemical treatment of polychlorinated organic compounds in soils showed an efficient dechlorination. Thus, we investigated mechanochemical treatment of PFAS contaminated soils with various additives in a ball mill and analyzed the PFAS defluorination with gas chromatography mass spectrometry (GC-MS) and liquid chromatography tandem mass spectrometry (LC-MS/MS), respectively, as well es the fluoride mineralization by ion chromatography (IC) and fluorine K-edge X-ray absorption near-edge structure (XANES) spectroscopy.
Woodworms, carpet beetles, clothes moths and termites are well known pests on artifacts of cultural importance. Lately also silverfish have gained importance. Protection of our cultural heritage for future generations is not a new task but the methods have changed. Conventional use of pesticides in the past has preserved precious objects up to the presence, which otherwise probably would have been lost over time due to the destruction by insects and microbes. However, several of the objects were contaminated with poisons in such a manner that they became unsafe to be handled and thus are useless for exhibitions or scientific studies.
Today, the concept of Integrated Museum Pest Management (IMPM) provides guidance for non-residue treatments of infested objects, followed by save storage or display under pest free (or maximum pest reduced) environments. Inert fumigants, physical and biological control measure, precise monitoring, threshold evaluations and detailed knowledge of the pest`s biology are key elements within IMPM.
Woodworms, clothes moths and termites, however, are not always considered as only pests. Some professionals have also used them to produce new pieces of art or for the installation of ephemeral displays. Under more or less controlled conditions, the insects´ destructive nature on wood or textiles has been turned around to a process of creation with aesthetic or philosophical messages.
Destructive or creative - it just depends on the point of view!
Harnessing near-chromosome level quality genomes to explore the evolution of termite immunity
(2023)
The phylogeny of the Blattodea boasts a wide degree of sociality spanning from solitary cockroaches to advanced ecosystem-dominating higher termite societies. The emergence of sociality in termites was associated with the acquisition of a diverse range of social structures. Previous work has found evidence for a caste-specific social defence system in termites leading to an immune system that may favour group over individual defence. While preliminary work suggests a correlation between social transitions and a reduction of immune gene family diversity, the lack of available high-quality termite genomes hampers complete knowledge of the true diversity of immune gene evolution across termite phylogeny. Here, we report on the sequencing and near-chromosome level assembly of 48 high-quality long-read-based genomes across major termite and cockroach sister-branch lineages. We investigate the diversity and evolutionary history of immune genes across genomes, focusing particular attention on correlations between immune gene evolution and transitions in sociality over termite phylogeny.
Insecta is one of the most diverse phyla in the animal kingdom, with species living in all types of habitats encountering an even greater diversity of pathogens and parasites. Defence strategies against such harmful threats led to a variety of molecular mechanisms, ecological shifts, and genetic innovations. Gene families underlying the molecular basis of the immune responses have evolved within the boundaries given by the species ecology. Here, we explore the evolution of some emblematic immune gene families throughout the Insecta phylum shedding light on remarkable genetic events such as gene duplication or gene loss. We followed a workflow based on the Hidden Markov model to search for immune genes in 55 high-quality genomes of insects. We highlight the emergence of group defence in social species as an ecological shift that released selection pressure on immune gene families notably in Blattodea. Further, we draw attention to certain gene families and the link between their diversity and the specificities of the species’ microbiota. Overall, we report data on immune gene diversity in insects.
Adipokinetic hormone (AKH) is a neuropeptide produced in the insect corpora cardiaca that plays an essential role in mobilizing carbohydrates and lipids from the fat body to the hemolymph. AKH acts by binding to a rhodopsin-like G protein-coupled receptor (GPCR), the adipokinetic hormone receptor (AKHR). In this study, we tackle AKH ligand and receptor gene evolution as well as the evolutionary origins of AKH gene paralogues from the order Blattodea (termites and cockroaches). Phylogenetic analyses of AKH precursor sequences point to an ancient AKH gene duplication event in the common ancestor of Blaberoidea, yielding a new group of putative decapeptides. In total, 16 different AKH peptides from 90 species were obtained. Two octapeptides and seven putatively novel decapeptides are predicted for the first time. AKH receptor (AKHRs) sequences from 18 species, spanning solitary cockroaches and subsocial woodroaches as well as lower and higher termites, were subsequently acquired using classical molecular methods and in silico approaches employing transcriptomic data. Aligned AKHR open reading frames revealed 7 highly conserved transmembrane regions, a typical arrangement for GPCRs. Phylogenetic analyses based on AKHR sequences support accepted relationships among termite and cockroach lineages to a large extent, while putative post-translational modification sites do not greatly differ between solitary and subsocial roaches and social termites. This study provides important information not only for AKH and AKHR functional research but also for further analyses interested in their development as potential candidates for biorational pest control agents against invasive termites and cockroaches.
Regional standardisation activities and how VAMAS can help in any way to promote activities are reported.
Activities related to organisational updates, government initiatives/priorities (especially related to Materials), details of any strategy documents publicly available, networks within Germany and how we engage are presented.
Steelmaking slag is a by-product of steel production of which 4.5 Mt were produced in 2020 in Germany alone. It is mainly used in road construction, earthwork and hydraulic engineering. A smaller part is returned to the metallurgical circle, used as fertilizer or landfilled.
With this use, iron oxides still contained in steelmaking slag are lost. In addition, the possibility of producing higher-grade products from steelmaking slag is foregone. In recent decades, many researchers have investigated the production of Portland cement clinker and crude iron from basic oxygen furnace slags (BOFS) via a reductive treatment. Carbothermal treatment of liquid BOFS causes a reduction of iron oxides to metallic iron, which separates from the mineral phase due to its higher density. Simultaneously, the chemical composition of the reduced slag is adapted to that of the Portland cement clinker.
In this study, German BOFS was reduced in a small-scale electric arc furnace using petrol coke as a reducing agent. The resulting low-iron mineral product had a similar chemical composition to Portland cement clinker and was rich in the tricalcium silicate solid solution alite (Ca3SiO5). Based on its chemical and mineralogical composition, similar to that of Portland cement clinker, the reduced BOFS has the potential to react comparably. In our study, the reduced BOFS produced less heat of hydration compared to OPC and its hydraulic reaction was delayed. However, adding gypsum has been shown to accelerate the hydration rate of the reduced BOFS compared to that known from the calcium silicates of Portland cement clinker.
Further research to improve the hydraulic properties of the reduced slag is essential. If successful, producing a hydraulic binder and crude iron from BOFS could have economic and ecological benefits for both the cement and steel industry.
Melanins are organic pigments produced by most fungi. These organisms either fix these pigments in their cell wall or secrete them into their extracellular environment to protect themselves against an array of physicochemical stresses (e.g., UV irradiation, desiccation, ...). Melanin can adsorb metals like Fe. How this affects fungal uptake of Fe and deterioration of Fe-containing minerals and metals is however less known. To study this, we use the model fungi Knufia petricola A95, a rock-inhabiting fungus known to deteriorate minerals and have melanised cell walls, and Amorphotheca resinae, able to contaminate fuel tanks, secrete melanin and corrode metals. In K. petricola, we have deleted genes involved in melanin production and Fe uptake using CRISPR/Cas. Through comparison of the geochemical signatures of these gene deletion mutants with those of the wild type (WT), we explore the specific mineral/metal deterioration mechanisms of melanised fungi.
Fe isotope signatures of the biomass of melanin- and Fe uptake-deficient mutants of K. petricola revealed that Fe adsorbed either directly onto melanin or after being reduced by Fe reductases. Importantly, once adsorbed to melanin, Fe could not be mobilised and taken up into the cell: both the WT and its melanin-deficient mutant, previously grown at Fe replete conditions, showed similar growth at Fe deficient conditions.
Olivine dissolution experiments revealed that Fe oxidation inhibits dissolution. K. petricola was able to enhance dissolution when this inhibition is strongest (at pH 6) and prevented dissolution when this inhibition is weakest (at pH 4). The fungus therefore dissolves olivine by interacting with the oxidised Fe at the olivine surface. However, Fe uptake did not seem to be involved: mutants deficient in various Fe uptake mechanism dissolved olivine at the same rate as the WT. This indicates that Fe adsorption onto melanin might play a key role. This is also shown by K. petricola’s ability to enhance olivine dissolution even further if secreting a melanin precursor and A. resinae’s corrosion of carbon steel whilst secreting melanin. Combined, our results imply that the Fe adsorbed to melanin cannot be taken up but enables fungi to deteriorate Fe-containing substrates at a higher rate.
Microbial contamination of fuels by fungi or bacteria poses risks such as corrosion and fuel system fouling, which can lead to critical problems in refineries and distribution systems and has a significant economic impact at every stage of the process. Many factors have been cited as being responsible for microbial growth, like the presence of water in the storage tanks. In fact, only 1 % water in a storage system is sufficient for the growth of microorganisms like bacteria or yeasts, as well as for the development of fungal biomass at the oil/water interface.
This work presents a rapid test for the accurate determination of genomic DNA from aqueous fuel extracts. The detection is based on the use of polystyrene-mesoporous silica core-shell particles onto which modified fluorescent molecular beacons are covalently grafted. These beacons contain in the hairpin loop a target sequence highly conserved in all bacteria, corresponding to a fragment of the 16S ribosomal RNA subunit. The designed single-stranded molecular beacon contained fluorescein as an internal indicator and a quencher in its proximity when not hybridized. Upon hybridization in presence of the target sequence, the indicator and the quencher are spatially separated, resulting in fluorescence enhancement. To perform the assay the developed particles were deposited on different glass fibre strips to obtain a portable and sensitive rapid test. The assays showed that the presence of genomic DNA extracts from bacteria down to 50–70 μg L–1 induced a fluorescence response. The optical read-out was adapted for on-site monitoring by fitting a 3D-printed case to a conventional smartphone, taking advantages of the sensitivity of the CMOS detector. Such embedded assembly enabled the detection of genomic DNA in aqueous extracts down to the mg L–1 range and represents an interesting step toward on-site monitoring of fuel contamination.
This presentation was held in an OECD Webinar introducing the newly developed and published OECD TG 125 on particle size and size distribution. The presentation is explaining the structure if the TG 125 and addresses all included methods and methodologies in a short and understandable way for the broader public. The presentation includes sections about nano-particles and nano-fibres.
Human-made systems, also called “build environment” or “technosphere”, sustain human comfort as well as our industrial activities. These systems have become particularly widespread since the Industrial Revolution, i.e., since the 17th century. At the same time, these technical systems – buildings, monuments, energy production, transformation and transmission, water purification and supply systems - serve as new habitats for living organisms.
Life is ubiquitously present on our planet since a very long time: the Earth is 4.54 billion years old and microbial communities have played a key role on our planet for 3.7 billion years. Once human-made system appeared, microorganisms became an integral part of all types of technosphere infrastructure as well.
Here we will illustrate biosphere-technosphere interactions using a specific example of the black fungi and their impact on the efficiency of solar (photovoltaic) panels. This expanding renewable infrastructure for electricity generation is growing on all continents - and create a specific, arid habitat for stress-tolerant black fungi.
Black fungi were once discovered in hot and cold natural deserts – and now belong to the persistent colonisers of human-made deserts of solar parks. This new niche is evolving an impressive biodiversity. So far more than 60 isolates of black fungi belonging to Arthoniomycetes, Eurotiomycetes and Dothideomycetes were obtained from solar panels in Europe and Americas. Here we will present the analysis of this emerging anthropogenic biodiversity.
Opportunities for future research in the field include quantification of the microbial load on technosphere surfaces – along with characterisation of the corresponding microbial diversity. The strategy of precise measurement and characterisation will enable us to reliably determine the beneficial and harmful functions that living microorganisms play in the functioning of energy-generating systems – and technosphere in general.
Generation of Cryomyces antarcticus mutants to explore the importance of DHN melanin for survival
(2023)
Cryomyces antarcticus, a cryptoendolithic melanized fungus endemic to Antarctica (phylum Ascomycota, class Dothideomycetes incertae sedis), has demonstrated high capability to survive extreme environmental conditions like those found in space (e.g., ionizing radiation, vacuum, microgravity), thus fueling fundamental astrobiological questions like “the search for life beyond Earth”. Its extraordinary resilience has been attributed to the presence of thick, highly melanized cell walls, which may contain both DHN and DOPA melanins. To better understand the contribution of DHN melanin to the overall resilience of C. antarcticus, we decided to generate melanin-deficient mutants by genetic engineering. For this, the melanin-PKS (polyketide synthase)- encoding ortholog was identified in the C. antarcticus CBS 116301 genome and used to design primers for re-sequencing of the capks1 locus in the strain CCFEE 515. Based on the genetic toolkit developed for the black fungus Knufia petricola, we designed a strategy for mutating capks1. Protoplasts of C. antarcticus CCFEE 515 were generated and co-transformed with a circular AMA-containing plasmid for expression and in-vivo assembly of Cas9 and two capks1-specific sgRNAs and a PCR-generated donor DNA i.e., a hygromycin resistance cassette flanked by ~75-bp-long sequences homologous to the capks1 locus. Transformation of C. antarcticus is challenging because of its very slow growth and uncertain gene copy number. It took six months from obtaining enough biomass for cell wall lysis to transferring the putatively resistant transformants for genotyping, but we eventually managed to generate three independent non-melanized (whitish) Δcapks1 mutants! We are now awaiting first complemented strains as ultimate genetic transformation control. They are considered to have a wild-type-like pigmentation due to the reintroduction of the wild-type capks1 into the Δcapks1 mutant.