Filtern
Dokumenttyp
- Zeitschriftenartikel (21)
- Vortrag (18)
- Beitrag zu einem Tagungsband (5)
- Posterpräsentation (2)
- Beitrag zu einem Sammelband (1)
Schlagworte
- Shape memory polymer (22)
- Poly(ester urethane) (19)
- QR code (9)
- Thermo-mechanical properties (7)
- Active polymer (6)
- Durability (4)
- Formgedächtnispolymer (4)
- Information carrier (4)
- Smarte Etiketten (4)
- Smartphone (4)
Eingeladener Vortrag
- nein (18)
Thermo-mechanical Effects of hydrolytic Aging on an active Polymer with Triple-Shape Properties
(2010)
Star-shaped polyhedral oligomeric silsesquioxane (SPOSS)-based multi-arm poly(ε-caprolactones) (PCLs) with various arm lengths were synthesized by ring opening polymerization of ε-caprolactone. Increasing the PCL arm lengths was observed to increase the melting temperature and also the melt crystallization temperature in SPOSS-PCLs. Star-shaped POSS-PCL polyurethanes (SPOSS-PUs) were then prepared by cross-linking SPOSS-PCLs with hexamethylene diisocyanate (HMDI) and their shape memory (SM) behaviour was determined. For this purpose two cyclic thermo-mechanical testing concepts with similar programming (deformation and shape fixing) but different recovery strategies (free strain versus fixed-strain constrained stress recovery) were used and the synthesized polymers were systematically investigated around the crystallization and melting temperatures of PCL. SPOSS-PU with the highest POSS content exhibited remarkable cycles-averaged (N = 2–5) shape fixities and strain recoverabilities of 98% and stress recoverabilities close to 100%. The main structural factors that were expected to reduce the SM performances with increasing PCL arm lengths were a lowering of cross-link density (content of octasubstituted POSS) and an increase in chain flexibility/molecular mobility.
Shape memory polymers (SMP) belong to the class of stimuli-responsive materials and have generated significant research interest. Their capability to retain an imposed, temporary shape and to recover the initial, permanent shape upon exposure to an external stimulus depends on the "functional determinants", which in simplistic terms, can be divided into structural/morphological and processing/environmental factors. The primary aim of the first part of this review is to reflect the knowledge about these fundamental relationships. In a next step, recent advances in shape memory polymer composites are summarized. In contrast to earlier reviews, studies on the impairment of shape memory properties through various factors, such as aging, compression and hibernation, lubricants, UV light and thermo-mechanical cycling, are extensively reviewed. Apart from summarizing the state-of-the-art in SMP research, recent progress is commented.
Temperature-memory polymers are able to generate a substantial mechanical response when heated above the temperature, at which a preceding deformation was carried out. Here we show how to design the temperature-memory effect (TME) by thermomechanical treatment. As a model polymer, phase segregated poly(ester urethane) (PEU) containing crystallizable segments of poly(1,4-butylene adipate) (PBA) was used. For programming, strain elongation was applied at temperatures within the PBA melting transition area, before temperature holding, unloading and cooling were carried out. Upon heating under stress-free or constant strain recovery conditions, precisely set temperature-memory onsets could be witnessed. Most importantly, strain fixities and recoverabilities the same as maximum recovery stresses turned out to be controllable by strain rate and temperature holding time after deformation, while transition temperatures remained largely unaffected. The tailoring of thermoresponsiveness was structurally enabled by different PBA crystallinities in the programmed state as verified by wide-angle X-ray scattering (WAXS). The reported studies intend to design TMEs in semicrystalline polyurethanes according to user-defined needs to make this technology broadly applicable.