Filtern
Dokumenttyp
- Zeitschriftenartikel (5)
- Vortrag (3)
- Dissertation (1)
- Posterpräsentation (1)
Schlagworte
- Polymorphism (4)
- Poly(ester urethane) (3)
- Shape memory polymer (3)
- Active polymer (2)
- Actuation (2)
- Hybrid star-shaped polymer (2)
- Mechanical properties (2)
- POSS-polycaprolactone polyurethanes (2)
- Phase change (2)
- Poly(1,4-butylene adipate) (2)
Eingeladener Vortrag
- nein (3)
Shape memory polymers (SMPs) can change their shape on application of a suitable stimulus. To enable such behavior, a ‘programming’ procedure fixes a deformation, yielding a stable temporary shape. In thermoresponsive SMPs, subsequent heating triggers entropy-elastic recovery of the initial shape. An additional shape change on cooling, i.e. thermoreversible two-way actuation, can be stimulated by a crystallization phenomenon. In this thesis, cyclic thermomechanical measurements systematically determined (1) the shape memory and (2) the actuation behavior under constant load as well as under stress-free conditions. Chemically cross-linked, star-shaped polyhedral oligomeric silsesquioxane polyurethane (SPOSS-PU) hybrid polymer networks and physically cross-linked poly(ester urethane) (PEU) block copolymers were investigated around the melting and crystallization temperatures of their polyester soft segments. (1) The SPOSS-PUs showed excellent shape fixities and recoverabilities of almost 100% at high cross-linking density, while PEUs exhibited pronounced shape memory properties at increased soft segment content. Furthermore, two-fold programmed SPOSS-PU specimens were able to recover their initial shape in two thermally separated events. Even a neck, which formed during deformation of SPOSS-PUs with high soft segment content, was reversed. (2) In PEUs, globally oriented crystallization on cooling drove expansion of the sample, in particular at high soft segment content and after application of a strong deformation. Melting reversed that orientation; the PEU sample contracted and thereby completed the thermoreversible actuation cycle. Under load, multiple polymorphic phase transitions enabled two successive expansion and contraction steps, while under stress-free conditions various geometric shape changes, including the increase and decrease of PEU sample length and thickness as well as twisting and untwisting could be experimentally witnessed. Such actuation technology allows for entirely new applications, enabling mimicry of reversible, bidirectional and repeated organic movements.
Here, we present an investigation of the triple-shape properties of star-shaped polyhedral oligomeric silsesquioxane-poly(ε-caprolactone) polyurethanes (SPOSS-PUs), which have three-dimensional network structures. In a typical 'triple-shape functionalization process', mostly consisting of two tensile deformations at different temperatures, chain immobilization of the polymer network component poly(ε-caprolactone) (PCL) was successfully realized first through crystallization and then through vitrification. Subsequently, large parts of the respective strains were released under stress-free recovery conditions. The two-fold fixed ('programmed') specimens responded to heating with two independent length contractions (switching steps); the first shape change was associated with PCL devitrification and the second one with the melting of hitherto crystalline PCL. It was revealed that the triple-shape properties of SPOSS-PU networks considerably depend on PCL network chain length. When applying exactly the same 'triple-shape creation procedure', larger strain releases were detected in the first transition for polymers with a higher PCL network chain length, whereas the second transition was more accentuated for SPOSS-PU networks with a shorter PCL chain length. In the course of thermo-mechanical cycling, the formation of a neck during the second tensile deformation was repeatedly detected for SPOSS-PUs with higher PCL network chain length; in the subsequent recovery process the specimens even exhibited the highest total strain recoverability. Finally, gradual strain release could be achieved at temperatures below the PCL melting transition through the selection of up to four temperature holding steps, at which every time stable shapes were formed.
Herein, we report on how to teach a thermoplastic polyurethane elastomer completely stress-free, bidirectional motion. Briefly spoken, we applied training, consisting of extensive tensile deformation in the specimen's viscoelastic state, initiating deformation-induced crystallization. Once unloaded, thermo-reversible specimen expansion and contraction could be detected. Following the microstructural evolution of such a trained specimen by in situ wide-angle X-ray scattering gave evidence for progressive growth of oriented crystallites during cooling. Upon heating, crystallite melting resulted in structural disorder. Beyond this, modification of the training method was used to introduce a geometrically more complex crystalline order. Here, actuation in the form of a decrease and an increase in sample thickness and specimen twisting and untwisting were witnessed. The novel semi-crystalline polymer actuator highlights an enormous potential for realizing versatile reversible shape changes in elastomers.
Phase-segregated PEU exhibits two-way shape changes under various constant stresses. Most distinct actuation (expansion on cooling and contraction on heating) can be detected between +60 and -20 °C when the maximum stress applied during a thermo-mechanical pretreatment approached the point where deformation-induced crystallization of the PBA soft segment sets in. The driving forces for the strain-related two-way shape changes consist of PBA crystallization and PBA melting-induced entropy elasticity. At low constant stresses (<1.5 MPa), entropy elasticity also contributes to specimen expansion on cooling. The results of multiple- cycling experiments imply that PEU is an appropriate candidate for the fabrication of thermoresponsive actuators working under constant stress conditions.
Poly(ester urethane) with varying polyester chain length: Polymorphism and shape-memory behavior
(2013)
The swelling, viscoelastic, and mechanical behavior of phase-segregated poly(ester urethane) (PEU) block copolymers, composed of 4,4'-methylenediphenyl diisocyanate, 1,4-butanediol as a chain extender, and crystallizable poly(1,4-butylene adipate) (PBA) with molecular weights between 1330 and 4120 g mol-1, are investigated. Wide-angle X-ray scattering (WAXS) is employed to study the overall PEU crystallinity, which increases from 8.6 to 13.6% at higher PBA contents. The existence of two crystalline, polymorphic PBA phases, a thermodynamically stable α phase and a metastable β phase, is confirmed by further WAXS measurements. Calorimetric and thermomechanical investigations give evidence for controllable PBA polymorphic behavior. The crystallization conditions, like the cooling rate, affect the emerging polymorphic mixture, whereas the storage conditions either promote or inhibit the polymorphic (β to α) transition. The introduced concepts represent a new approach for gaining control over programmable thermoresponsiveness, which may be transferable to other shape-memory polymers with polymorphic switching segments.
Star-shaped polyhedral oligomeric silsesquioxane (SPOSS)-based multi-arm poly(ε-caprolactones) (PCLs) with various arm lengths were synthesized by ring opening polymerization of ε-caprolactone. Increasing the PCL arm lengths was observed to increase the melting temperature and also the melt crystallization temperature in SPOSS-PCLs. Star-shaped POSS-PCL polyurethanes (SPOSS-PUs) were then prepared by cross-linking SPOSS-PCLs with hexamethylene diisocyanate (HMDI) and their shape memory (SM) behaviour was determined. For this purpose two cyclic thermo-mechanical testing concepts with similar programming (deformation and shape fixing) but different recovery strategies (free strain versus fixed-strain constrained stress recovery) were used and the synthesized polymers were systematically investigated around the crystallization and melting temperatures of PCL. SPOSS-PU with the highest POSS content exhibited remarkable cycles-averaged (N = 2–5) shape fixities and strain recoverabilities of 98% and stress recoverabilities close to 100%. The main structural factors that were expected to reduce the SM performances with increasing PCL arm lengths were a lowering of cross-link density (content of octasubstituted POSS) and an increase in chain flexibility/molecular mobility.