Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (47) (entfernen)
Sprache
- Englisch (47) (entfernen)
Schlagworte
- Ground vibration (11)
- Finite-element boundary-element method (4)
- Layered soil (4)
- Railway track (4)
- Building vibration (3)
- Hammer impact (3)
- Slab track (3)
- Track-soil interaction (3)
- Vibration measurements (3)
- Container loading (2)
- Drop test (2)
- Field tests (2)
- Foundation load (2)
- Layered soils (2)
- Measurement (2)
- Mitigation (2)
- Soil properties (2)
- Soil-building interaction (2)
- Soil-wall-floor model (2)
- Train passage (2)
- Train speed (2)
- Train-induced ground vibration (2)
- Vehicle-track interaction (2)
- Vehicle-track-soil interaction (2)
- 1-D insertion loss (1)
- 2-span bridge (1)
- Achsfolgespektren (1)
- Amplitude-charge weight laws (1)
- Amplitude-distance laws (1)
- Apartment building (1)
- Assessment (1)
- Attenuation (1)
- Axle impulses (1)
- Axle loads (1)
- Axle sequence (1)
- Axle-sequence spectrum (1)
- Ballast track (1)
- Ballast tracks (1)
- Bauteile (1)
- Bauwerke (1)
- Boundary element method (1)
- Bridge resonance (1)
- Bridge track (1)
- Brücken (1)
- Column/wall resonance (1)
- Continuously inhomogeneous soils (1)
- Damping (1)
- Dispersion (1)
- Displacements (1)
- Dynamic testing (1)
- Evaluation (1)
- Excitation forces (1)
- Explicit Green´s functions (1)
- Explosion-induced ground vibrations (1)
- FEBEM and simplified methods (1)
- Filter effects (1)
- Finite element method (1)
- Finite element models (1)
- Floating slab track (1)
- Floor amplification (1)
- Floor resonance (1)
- Force transfer (1)
- Foundation reduction (1)
- Freight train (1)
- Ground vibration measurements (1)
- Hammer tests (1)
- High-Rise Building (1)
- High-speed train (1)
- Inertial Interaction (1)
- Irregular ballast (1)
- Irregular soil (1)
- Irregularities (1)
- Kinematic Interaction (1)
- Laboratory tests (1)
- Long-span bridge (1)
- MASW (1)
- Measurements (1)
- Mitigation measures (1)
- Modal force spectrum (1)
- Modalanalyse (1)
- Modes (1)
- Office building (1)
- Office tower (1)
- Passenger train (1)
- Pile Foundation (1)
- Pile bending stiffness (1)
- Pile foundation (1)
- Plate-soil interaction (1)
- Prediction of explosion induced ground and building vibration (1)
- Propagation from a tunnel (1)
- Radiation damping (1)
- Railway (1)
- Railway bridge (1)
- Railway induced ground vibration (1)
- Railway tracks (1)
- Railway tunnel (1)
- Railway vibration (1)
- Randomly heterogeneous soil (1)
- Residential building (1)
- SASW (1)
- SPAC (1)
- Scattering (1)
- Simple prediction (1)
- Soil stiffness (1)
- Soil-building resonance (1)
- Surface Foundation (1)
- Surface line (1)
- Surface-tunnel reduction (1)
- Track compliance (1)
- Track damage (1)
- Track damage monitoring (1)
- Track irregularities (1)
- Track vibration (1)
- Train passages (1)
- Transfer function (1)
- Tunnel track (1)
- Tunnel vibration (1)
- Tunnel-pile transfer (1)
- Under sleeper pads (1)
- Under-ballast plate (1)
- Varying stiffness (1)
- Vibration measurement (1)
- Vibration reduction (1)
- Wave excitation (1)
- Wave velocity (1)
- Wavenumber integrals (1)
- Waves (1)
- Wind energy tower (1)
- floor vibration (1)
- ground vibration (1)
- mitigation (1)
- modal analysis (1)
- railway track (1)
- track-soil interaction (1)
- undersleeper (1)
- wave analysis (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (18)
- 7.2 Ingenieurbau (18)
Train-induced ground vibrations - the emission and transmission from tunnel and surface lines
(2023)
Train-induced ground vibrations are quite different for tunnel and surface lines. The excitation of the track and ground vibration by the vehicle-track-soil interaction maybe influenced by the stiffer track support of the tunnel invert. The excited waves are propagating on a different path compared to the surface line. The wave propagation in the interior of the soil is calculated by a wavenumber integral in a similar way as the propagation along the surface and a general reduction of < 0.5 has been found. An additional reduction has been found because of the missing Rayleigh wave. The different excitation of tunnel lines is analysed theoretically by the combined finite-element boundary-element method and some results about the influencing tunnel and soil parameters will be shown. Measurements have been made at the Mühlberg-Tunnel in Germany. The vibrations of the train, the track and the soil have been measured simultaneously at the tunnel and a nearby surface line. Spectra will be shown for different train speeds between 60 and 160 km/h. A clear reduction effect for the tunnel line compared to the surface line has been observed in a specific (train-speed-dependent) frequency range. This agrees well with the observations of other research institutes. The mid-frequency tunnel-surface reduction seems to be a consequence of the stiffer track structure which leads to a wider distribution of the axle loads. Therefore, the axle impulses due to the train passage are longer and have a lower frequency content. This will have an effect on the ground vibrations at some distance which are present in case of an irregular transmission path through a ballast and soil with varying stiffness. A similar reduction effect can also be found for other track forms where the axle impulses are distributed on a longer track segment, for example slab tracks, tracks with under ballast plates, under ballast mats or under sleeper pads.
Three measurement campaigns of train-induced ground vibrations are evaluated for the vehicle-track-soil interaction. Ground vibrations, track vibrations and vehicle vibrations have been measured for train passages and impulse excitation and compared with theoretical results. The soil and the track-soil system are calculated by wavenumber integrals. The influence of the vehicle is introduced by a substructure method. By comparing theory and measurement the different components of excitation force and ground vibration can be analysed, the quasi-static excitation, track-alignment errors, the out-of-roundness of wheels, the wheel and rail roughness, and moreover, scattered axle impulses and ineffective high-frequency parts of the wheelset accelerations and forces.
Abstract. Three measurement campaigns of train-induced ground vibrations are evaluated for the vehicle-track-soil interaction. Ground vibrations, track vibrations and vehicle vibrations have been measured for train passages and impulse excitation and compared with theoretical results.
The soil and the track-soil system are calculated by wavenumber integrals. The influence of the vehicle is introduced by a substructure method. By comparing theory and measurement the different components of excitation force and ground vibration can be analysed, the quasi-static excitation, track-alignment errors, the out-of-roundness of wheels, the wheel and rail roughness, and moreover, scattered axle impulses and ineffective high-frequency parts of the wheelset accelerations and forces.
A combined finite element boundary element method has been developed to calculate the dynamic interaction of the railway track and the underlying soil. The track-soil results are coupled with a simple vehicle model to establish the force transfer function of the vehicle-track-soil system. Mitigation measures at the track, namely three different tracks with under-sleeper pads, are analysed. The un-sprung vehicle and heavy track masses on soft track elements yield a lower vehicle-tracksoil resonant frequency and a better reduction of the excitation forces at higher frequencies. If the effectiveness of the mitigation is measured as a vibration ratio between the isolated and an un-isolated reference track, the vehicle-track-soil resonance of the reference track has an important influence on the mitigation effectiveness. Therefore, different un-isolated reference tracks are analysed. It is shown how the frequency and amplitude of the vehicle-track resonance are influenced by the stiffness of the rail pads (strongest), the ballast (medium) and the soil (weakest). The reference track models have been compared with shaker tests on two railway tracks with strong resonances. The damage detection and repair control have become important tasks for ballast and slab tracks. Measurements which compare the damaged and the repaired status of the same track section at different times, or which compare a damaged and an intact track section at the same time, have been successfully performed at some sites in Germany and compared with the theoretical behaviour of intact and damaged tracks.
The damage detection and repair control have become important tasks for ballast and slab tracks. Measurements which compare the damaged and the repaired status of the same track section at different times, or which compare a damaged and an intact track section at the same time, have been successfully performed at some sites in Germany with slab tracks and ballast tracks and compared with the theoretical behaviour of intact and damaged tracks. The loss of contact between the sleeper and the plate, between the plate and the base layer, and some problems with soft or weakened soil have been analysed. The observed results, changes in the time histories of displacements and velocities due to train passages and in the transfer functions (compliances) due to hammer impacts, are encouraging that these measurements can be used to detect track damage. In addition, calculations with the combined finite-element boundary-element method have been used to confirm the conclusions about intact or damaged railway tracks.
The attenuation of wave amplitudes is ruled by the planar, cylindrical or spherical geometry of the wave front (the geometric or power-law attenuation) but also by the damping of the soil (an exponential attenuation). Several low- and high-frequency filter effects are derived for the layering and the damping of the soil, for the moving static and the distributed train loads and for a homogeneous or randomly heterogeneous soil. Measurements of hammer- and train-induced vibrations at five sites have been analysed for these attenuation and filter effects. The measured attenuation with distance can be discribed by generalised power laws and some reasons will be discussed. The theoretical filter effects can well be found in the measurements.