Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (127)
- Beitrag zu einem Tagungsband (6)
- Buchkapitel (2)
Referierte Publikation
- ja (135) (entfernen)
Schlagworte
- Femtosecond laser ablation (19)
- Laser-induced periodic surface structures (LIPSS) (17)
- Femtosecond laser (15)
- Laser ablation (15)
- Silicon (8)
- Radiation protection (7)
- Laser cleaning (6)
- Laser processing (6)
- Polymer (6)
- Titanium (6)
- High-speed optical techniques (5)
- Laser beam effects (5)
- Laser-induced periodic surface structures (5)
- Plasma polymerization (5)
- Surface functionalization (5)
- Double-pulse experiments (4)
- Friction (4)
- Laser-induced X-ray emission (4)
- Nanostructures (4)
- Plasma (4)
- Polyethylene (4)
- Steel (4)
- Ultrafast optical techniques (4)
- Ablation (3)
- Adhesion (3)
- Aluminium (3)
- Bone implant (3)
- Femtosecond laser processing (3)
- Fire retardant (3)
- Flame retardancy (3)
- Fused silica (3)
- Laser (3)
- Laser safety (3)
- Laser-induced periodic surface structures, LIPSS (3)
- Mach-Zehnder interferometer (3)
- Nanosecond laser (3)
- Oxidation (3)
- Polystyrene (3)
- Silicon compounds (3)
- Surface morphology (3)
- Surface structure (3)
- Threshold (3)
- Tribology (3)
- Ultrashort laser material interaction (3)
- Ultrashort pulsed laser (3)
- Wear (3)
- Acoustic measurement (2)
- Bioceramic coating (2)
- Biofilms (2)
- Calcium phosphate (2)
- Chalcopyrite (2)
- Curing (2)
- Damage (2)
- Dip-coating (2)
- Elemental semiconductors (2)
- Femtosecond (2)
- Femtosecond laser patterning (2)
- Fluid transport (2)
- Glasses (2)
- Incubation (2)
- Laser damage (2)
- Laser-beam impact phenomena (79.20.Ds) (2)
- Laser-induced damage threshold (2)
- Laser-induced forward transfer (2)
- Laser-induced x-ray emission (2)
- Melamine resin (2)
- Methylated poly(melamine-co-formaldehyde) (2)
- Micro-concentrator solar cell (2)
- Microphone (2)
- Niobium (2)
- Optical fiber (2)
- Optical properties (2)
- Paper (2)
- Photovoltaics (2)
- Physical radiation damage (2)
- Physical radiation damage (61.80.-x) (2)
- Polaritons (2)
- Radiation treatment (2)
- Scanning electron microscopy (2)
- Silicon oxide (2)
- Subpicosecond laser ablation (2)
- Surface plasmons (2)
- Surface texture (2)
- Surface wetting (2)
- Titanium alloy (2)
- Titanium nitride (2)
- Ultrashort laser pulses (2)
- (LIPSS) (1)
- Ab initio calculations (1)
- Allyl alcohol (1)
- Aluminium alloys (1)
- Aluminium oxide (1)
- Amorphization (1)
- Amorphous (1)
- Anodic oxidation (1)
- Anodization (1)
- Antibacterial surfaces (1)
- Application (1)
- Applications (1)
- Atomic force microscopy (1)
- Auger electron spectroscopy (1)
- Bacterial adhesion (1)
- Barium aluminium borosilicate glass (1)
- Bariumalumoborosilicate glass (1)
- Bariumalumoborosilicate glass surfaces (1)
- Bending strength (1)
- Bioceramics (1)
- Biofilm (1)
- Bioinspiration (1)
- Biomimetic surfaces (1)
- Biomometics (1)
- Bionic materials (1)
- Biosensor (1)
- Bone (1)
- Bor (1)
- Bug (1)
- CIGSe (1)
- CIGSe micro solar cells (1)
- Calcium compounds (1)
- Calcium phosphate coating (1)
- Carbon (81.05.Uw) (1)
- Cell adhesion (1)
- Central Asia (1)
- Colorimetry (1)
- Conduction bands (1)
- Conservation (1)
- Continuous-wave plasma (1)
- Copper-indium-gallium-diselenide (1)
- Coupling methods (1)
- Crystallization (1)
- Cu(In,Ga)Se2 (1)
- Cultural heritage (1)
- DDT (1)
- Damage threshold (1)
- Decontamination (1)
- Defect model (1)
- Defects (1)
- Dentistry (1)
- Diamond-like carbon (1)
- Dielectrics (1)
- Diffusion (1)
- Doping thin films (1)
- Dünnfilm, diamantartig (1)
- Dünnfilmtechnologie (1)
- Editorial (1)
- Electrochemistry (1)
- Electromagnetic scattering (1)
- Ellipsometrie (1)
- European Materials Research Society (E-MRS) (1)
- FS-laser ablation (1)
- Fatigue (1)
- Fatigue testing (1)
- Femtosecond pulse laser (1)
- Femtosecond pulses (1)
- Femtosekundenlaser (1)
- Fiber waveguides (1)
- Fiber waveguides (42.81.Qb) (1)
- Filter (1)
- Fire safety composite tanks (1)
- Flame retardants (1)
- Fourier transforms (1)
- Fs-laser patterning (1)
- Glass (1)
- Glass transitions (1)
- Glasses (81.05.Kf) (1)
- Glucose (1)
- Gold films (1)
- Heat affected zone (1)
- Hexamethyldisiloxane plasma polymer (1)
- Hydrocarbons (1)
- Image enhancement (1)
- Image restoration (1)
- Indium (1)
- Indium islands (1)
- Indium phosphide (1)
- Industrial applications (1)
- Ionization mass spectrometry (1)
- Kohlenstoffschichten (1)
- LIDT (1)
- Laser Machining (1)
- Laser Processing (1)
- Laser beam machining (1)
- Laser impact on surfaces (1)
- Laser micromachining (1)
- Laser pulses (1)
- Laser treatment (1)
- Laser-Material-Bearbeitung (1)
- Laser-beam impact phenomena (1)
- Laser-induced fixation (1)
- Laser-induced forward transfer (LIFT) (1)
- Laser-induced nanostructures (1)
- Laser-induced oxide layer (1)
- Laser-induced periodic surface strctures (LIPSS) (1)
- Laser-material interactions (1)
- Laser-modified surface (1)
- Layer-by-layer deposition (1)
- Liquid adsorption chromatography (1)
- Lizard (1)
- MALDI (1)
- Materials processing (1)
- Matrix-assisted laser desorption (1)
- Mechanical stress (1)
- Melamine precursors (1)
- Melting (1)
- Membrane perforation (1)
- Metals (1)
- Michelson interferometer (1)
- Micro solar cell (1)
- Microbial adhesion tests (1)
- Microbial adhesions (1)
- Microconcentrator solar cell (1)
- Microscopy (1)
- Mikrobearbeitung (1)
- Molybdenum substrate (1)
- Multimode fiber (1)
- Multispectral imaging (1)
- Ophthalmology (1)
- Optical breakdown (1)
- Optical coatings (1)
- Optical constants (78.20.Ci) (1)
- Optical fibers (1)
- Optical microscopy (1)
- Optical proper (1)
- Optische Konstanten (1)
- Orthopaedics (1)
- Oxide growth (1)
- Pacemaker (1)
- Papery (1)
- Parchment (1)
- Photoelektron spectroscopy (1)
- Physical vapor deposition (1)
- Pigments (1)
- Plasma polymers (1)
- Plasma-polymerized poly(allylamine) (1)
- Polarisation (1)
- Poly(methylmetacrylate) (1)
- Polycarbonate (1)
- Polymers-radiation effects (1)
- Polymethylmethacrylate (1)
- Polypropylene (1)
- Prosthetics (1)
- Protection housing (1)
- Pulse Laser (1)
- Pulse duration (1)
- Pulsed plasma (1)
- Pulslaser (1)
- Radiation treatment (81.40.Wx) (1)
- Refractive index (1)
- Reproducibility (1)
- Rods (structures) (1)
- Scanning Auger electron microscopy (1)
- Second harmonic generation (SHG) (1)
- Secondary hazard (1)
- Semiconductor (1)
- Semiconductor electrode (1)
- Semiconductors (1)
- Silica (1)
- Silica glass (1)
- Silicon nitride (1)
- Silk (1)
- Silk Road (1)
- Single- and multi-shot ablation (1)
- Solar cell (1)
- Solid electrolyte interface (1)
- Solid-state plasma (1)
- Spectroscopic imaging ellipsometry (1)
- Spectroscopy (1)
- Spot size (1)
- Spring Meeting 2016 (1)
- Structure (1)
- Superconductivity (1)
- Surface plasmon polariton (1)
- Surface plasmon polaritons (1)
- Surface processing (1)
- Surface superconductivity (1)
- Surface treatment (1)
- Textile (1)
- Thermoluminescence (1)
- Thick melamine layers (1)
- Thin films (1)
- Threshold of silicon (1)
- Ti6Al4V alloys (1)
- Ti:sapphire laser (1)
- Time-resolved measurements (1)
- Time-resolved reflectivity measurements (1)
- Titanium alloys (1)
- Titanium nitride films (1)
- Treshold (1)
- Tungsten (1)
- Ultra-short pulse laser processing (1)
- Ultrashort lasers (1)
- Ultrashort pulse laser processing (1)
- Vanadium alloys (1)
- Wall paintings (1)
- Water (1)
- Wood (1)
- X-ray (1)
- X-ray emission (1)
- X-ray emission hazards (1)
- X-ray energies (1)
- X-ray photoelectron spectroscopy (1)
- X-ray spectrum (1)
- fused silica (1)
- laser damage (1)
- lossy materials (1)
- nanosecond laser (1)
- optical fiber (1)
- plasmon lifetime (1)
- surface plasmon polaritons (1)
Organisationseinheit der BAM
- 6 Materialchemie (25)
- 6.2 Material- und Oberflächentechnologien (25)
- 6.7 Materialsynthese und Design (3)
- 9 Komponentensicherheit (3)
- 9.5 Tribologie und Verschleißschutz (3)
- 4 Material und Umwelt (2)
- 4.1 Biologische Materialschädigung und Referenzorganismen (2)
- 3 Gefahrgutumschließungen; Energiespeicher (1)
- 3.2 Gefahrguttanks und Unfallmechanik (1)
- 5 Werkstofftechnik (1)
Paper des Monats
- ja (2)
Biofilm formation poses high risks in multiple industrial and medical settings. However, the robust nature of biofilms makes them also attractive for industrial applications where cell biocatalysts are increasingly in use. Since tailoring material properties that affect bacterial growth or its inhibition is gaining attention, here we focus on the effects of femtosecond laser produced nanostructures on bacterial adhesion. Large area periodic surface structures were generated on steel surfaces using 30-fs laser pulses at 790 nm wavelength. Two types of steel exhibiting a different corrosion resistance were used, i.e., a plain structural steel (corrodible) and a stainless steel (resistant to corrosion). Homogeneous fields of laser-induced periodic surface structures (LIPSS) were realized utilizing laser fluences close to the ablation threshold while scanning the sample under the focused laser beam in a multi-pulse regime. The nanostructures were characterized with optical and scanning electron microscopy. For each type of steel, more than ten identical samples were laser-processed. Subsequently, the samples were subjected to microbial adhesion tests. Bacteria of different shape and adhesion behavior (Escherichia coli and Staphylococcus aureus) were exposed to laser structures and to polished reference surfaces. Our results indicate that E. coli preferentially avoids adhesion to the LIPSS-covered areas, whereas S. aureus favors these areas for colonization.
Zusammenfassung
The surface chemical modification of polyurethane (PU) films was performed by an UV laser-induced chemical reaction in a polysaccharide solution. This process may be applicable as hydrophilic packaging of implantable medical devices and in vivo sensors. When a PU film in contact with an aqueous alginic acid (AAC) solution was irradiated with a XeCl laser, the PU film turned hydrophilic. Contact angles of water on the film were reduced from 110° to 60°. Since light absorption of the AAC solution at 308 nm was negligibly small, reactive sites were generated solely on the PU surface. There, AAC could be immobilized by chemical bonds thus allowing for a nanometer-scaled grafting of this biomolecule. The mechanism was investigated by surface analyses with Fourier-transform infrared spectroscopy (FT-IR), dye staining, ultraviolet-visible (UV-VIS) spectroscopy, and scanning electron microscopy (SEM) techniques. A one-photon photochemical process could beidentified.
Chemical heterogeneities and molecular weight distributions of poly(ethylene oxide) (PEO)-co-polymethylene (PM) model oligomers, which are relevant to the synthesis of commonly used tensides, were investigated. For analytical characterization, the well-known principle of liquid adsorption chromatography at 'critical conditions' (LACCC) was modified. Near the critical conditions of adsorption of the PEO unit, e.g., at slight adsorption conditions of PM, the copolymers could be separated according to their PM chain length. The eluates were separated and single fractions of each peak were continuously transferred onto the MALDI target by means of a commercially available device. Simultaneously, the MALDI matrix solution was continuously added with a second pump. This procedure offers the possibility of the formation of homogeneous matrix-polymer textures. By MALDI-MS a complete characterization of the chemical composition (PEO and PM chain length) of each peak could be achieved. The obtained MALDI mass spectra of the eluates at different retention times could be used for the molecular weight calibration of the LAC system. In this way, an additional application of SEC, as in conventional 2D-chromatography, was avoided by using the MALDI method as quasi chromatographic separation
Ultrashort pulse laser microstructuring (pulse duration 130 fs, wavelength 800 nm, repetition rate 2 Hz) of titanium nitride (TiN) films on silicon substrates was performed in air using the direct focusing technique. The lateral and vertical precision of laser ablation was evaluated. The TiN ablation threshold changed with the number of pulses applied to the surface due to an incubation effect. An ablation depth per pulse below the penetration depth of light was observed. Columnar structures were formed in the silicon substrate after drilling through the TiN layer.
Ablation experiments with ultrashort laser pulses (pulse duration 150 fs, wavelength 800 nm) on polymers (PC, PMMA) relevant for biomedical technology have been performed in air. The lateral and vertical machining precision was evaluated by optical, atomic force and scanning electron microscopy. The ablation threshold reaches values in the range of 0.52.5 J/cm2 and depends significantly on the number of laser pulses applied to the same spot. The hole diameters are influenced by the laser fluence and the number of laser pulses. The relation between the ablation threshold and the number of laser pulses applied to the same spot is described in accordance with an incubation model.
Zusammenfassung
Laser pulses in the 10-fs domain provide a quality of micromachining of fused silica and borosilicate glass that is unobtainable with longer pulses in the range of several 100 femtoseconds up to picoseconds. The shortening of the pulses reduces the statistical behavior of the material removal and the ablation process thus attains a more deterministic and reproducible character. The improved reproducibility of ablation is accompanied by significantly smoother morphology. This offers the potential for lateral and vertical machining precision of the order of 100 nm and 10 nm, respectively.
Ablation of indium phosphide wafers in air was performed with low repetition rate ultrashort laser pulses (130 fs, 10 Hz) of 800 nm wavelength. The relationships between the dimensions of the craters and the ablation parameters were analyzed. The ablation threshold fluence depends on the number of pulses applied to the same spot. The single-pulse ablation threshold value was estimated to be fth(1)=0.16 J/cm2. The dependence of the threshold fluence on the number of laser pulses indicates an incubation effect. Morphological and chemical changes of the ablated regions were characterized by means of scanning electron microscopy and Auger electron spectroscopy.