Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (98)
- Vortrag (23)
- Beitrag zu einem Tagungsband (17)
- Posterpräsentation (14)
- Forschungsbericht (8)
- Beitrag zu einem Sammelband (2)
Schlagworte
- Gas chromatography (5)
- HPLC-MS/MS (5)
- Analytik (4)
- Brominated flame retardant (4)
- Crystal structure (4)
- ERM (4)
- Extraction (4)
- Ochratoxin A (4)
- AHTN (3)
- Acrylamid (3)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (23)
Referenzmaterialien
(1998)
Tenuazonic acid (TA) is a major water soluble Alternaria mycotoxin. In the present work, a method for the quantification of TA in beer by liquid chromatography-ion-trap multistage mass spectrometry after derivatization with 2,4-dinitrophenylhydrazine is described. The method is based on a rapid workup procedure and features a LOD of 2 µg/kg without preconcentration using 400 mg of sample. Validation was performed for a working range of 8-500 µg/kg.
A total of 43 beers of different brewing styles (pilsener, wheat beer, bock beer, dark beer and alcohol free beer) was analysed. TA was detected in 37 samples, 16 samples were above the LOQ. An average content of 11 µg/kg was found, the highest incidence being 175 ± 13 µg/kg. To our knowledge, this is the first report on the occurrence of TA in beer and beverages in general.
A procedure for the quantification of the PCB marker congeners 28, 52, 101, 138, 153, 180 in plastic waste form the recycling of cables in the range of content between 0.1 mg kg-1 and 20 mg kg-1 was validated. Representative reference materials for laboratory analyses were produced using granulates from different recycling processes. The method development included aspects of grinding, sieving, homogenising as well as the comparison of extraction methods and chromatographic conditions. The validated procedure foresees grinding of the technical sample to an upper particle size limit of 0.50 mm followed by extraction with an unpolar solvent such as n-hexane and gas chromatographic determination. LOD and LOQ for individual congeners ranged between 0.01 mg kg-1 and 0.08 mg kg-1. Electron capture detection (ECD) and mass selective detection (MS) were equivalent if chromatographic conditions were appropriately selected. The application of MS was advantageous in presence of significant amounts of interfering components which have been found in some cables.
Three reference materials containing the marker congeners in the range of 0.1 mg kg-15 mg kg-1 were submitted to a final validation intercomparison with 23 selected field laboratories using the developed method. Relative reproducibility standard deviations varied between 15% and 33%.
Aim: The objective of the study was to provide conclusive evidence for the effect of particle size reduction as by milling on the extractable content of ethyl glucuronide (EtG) of hair samples. Methods: A number of real case hair samples and two pooled hair materials with EtG contents in the range of 1030 pg/mg were systematically compared with regard to the extraction yield of EtG after cutting to 23 mm length and pulverization with a ball mill. After the respective treatment the samples were submitted to aqueous extraction followed by quantification of EtG using HPLC-MS/MS. Results: It was unequivocally demonstrated that milling of hair samples prior to aqueous extraction significantly increases the extractable EtG content compared with cut hair. The effect ranged between 137 and 230% and was seen to occur regardless of the extent of pulverization. Cooling of samples was not necessary to prevent partial degradation of EtG during the grinding procedure. Conclusion: The options currently employed at choice in analytical practice (cutting or milling) were seen to significantly affect the extractable amount of EtG in hair. This is suspected to influence the degree of equivalence of quantification results obtained in different laboratories as well as their respective classification of a test subject's drinking behaviour on the basis of currently recommended cut-off values.
Der Einsatz aktiver (Pumpprobennahme,
Schöpfprobennahme) und passiver (Diffusionsprobennahme)
Probennahmetechniken zur Gehaltsbestimmung von
LHKW sowie Ethen und Methan in Grundwasser wird aus
ordnungsbehördlicher Sicht hinsichtlich der Vergleichbarkeit
von Analysendaten untersucht. Am Beispiel einer Kontamination
mit Trichlorethen sowie 1,2-Dichlorethen und
Vinylchlorid kann deutlich gemacht werden, dass die Einsatzmöglichkeit
der passiven Probennahme durch unzureichende
Strömungsverhältnisse im Aquifer sowie biologische
Aktivität im Pegelrohr begrenzt ist. Der aktiven Probennahme
ist bei ungeklärten oder unzureichenden Strömungsverhältnissen
im Grundwasserleiter daher der Vorzug
zu geben. Das gaschromatographische Verfahren für Vinylchlorid
mittels Dampfraumtechnik wird um die Quantifizierung
von Methan und Ethen erweitert. Dabei werden für
die Bewertung von Altlasten relevante Bestimmungsgrenzen
von 0,1 µg/l (Vinylchlorid, Ethen) sowie 5 µg/l (Methan)
erreicht.
Aus der Validierung der Analysenmethode und den
Ergebnissen verschiedener Probennahmen werden Toleranzbereiche
für die Ergebnisse eines Grundwassermonitorings
abgeschätzt. Diese Streubreiten von Monitoring-
Ergebnissen sollten von Ingenieurbüros und zuständigen
Ordnungsbehörden bei der Bewertung der komplexen Abbauprozesse
eines LHKW-Grundwasserschadens beachtet
werden.
This article describes a simple and quick in silico method for the prediction of cytochrome P450 (CYP)-mediated hydroxylation of drug-like compounds. Testosterone and progesterone, two known substrates of CYP3A4, are used to test the method. Further, we apply the procedure to predict sites of hydroxylation of isomers of the flame retardant hexabromocyclododecane by CYP3A4. Within the method, the compound is rotated in the binding pocket of the cytochrome, so that each hydrogen under consideration is placed near the active centre. Afterwards, short molecular dynamics simulations are provided for each step of the rotation. All steps of the simulation are compared concerning the distances between the hydrogens and the active centre and the corresponding energies. The computational results correlate well with experimental results.
The interconversion of the stereoisomers contained in technical 1,2,5,6,9,10-hexabromocyclododecane, a major brominated flame retardant increasingly found in the environment and in biota, was investigated at elevated temperatures. The application of pure enantiomers of the three constituents α-, β-, and γ-HBCD enabled the unambiguous elucidation of the individual isomerisation reactions as well as the quantification of all respective rate constants. At 160 °C the rate constants range over two orders of magnitude from 1.50 × 10-3 to 1.88 × 10-5 mol(%) s-1. A preliminary mechanistic explanation for the differences of the rate constants which govern the composition of HBCD diastereomers at equilibrium is given.
Odor Perception by Dogs: Evaluating Two Training Approaches for Odor Learning of Sniffer Dogs
(2017)
In this study, a standardized experimental set-up with various combinations of herbs as odor sources was designed. Two training approaches for sniffer dogs were compared; first, Training with a pure reference odor, and second, training with a variety of odor mixtures with the target odor as a common denominator. The ability of the dogs to identify the target odor in a new context was tested. Six different herbs (basil, St. John’s wort, dandelion, marjoram, parsley, ribwort) were chosen to produce reference materials in various mixtures with (positive) and without (negative)chamomile as the target odor source. The dogs were trained to show 1 of 2 different behaviors, 1 for the positive, and 1 for the negative sample as a yes/no task. Tests were double blind with one sample presented at a time. In both training approaches, dogs were able to detect chamomile as the target odor in any presented mixture with an average sensitivity of 72% and a specificity of 84%. Dogs trained with odor mixture containing the target odor had more correct indications in the transfer task.
The aim of this study was to investigate the distribution of zearalenone in wheat kernels contaminated with this mycotoxin. Kernels from a sample of a wheat harvest affected by Fusarium culmorum were sorted into six groups according to their visual attributes. Milled portions of these groups were analysed by high-performance liquid chromatography with fluorescence and diode array detection. The clean-up was performed with an immunoaffinity column after methanol/water (4:1, v/v) extraction. The zearalenone content of the unsorted kernel fraction was 74 µg/kg. The group of healthy-looking kernels was contaminated with only 6 µg/kg of zearalenone. The groups of kernels that appeared shrunken and chalky white, damage routinely caused by Fusarium, were contaminated with 170 and 117 µg/kg, respectively. A remarkably high level of zearalenone contamination, 2,184 µg/kg, was observed for the group of reddish kernels. An association between the presence of the red pigment aurofusarin and high levels of zearalenone was found. Therefore, this pigment may be used as a marker of high zearalenone content.
Die zuverlässige Überwachung geltender Mykotoxin-Grenzwerte ist elementarer Bestandteil von Lebensmittelsicherheit und Verbraucherschutz. Durch die zunehmende Bedeutung der Qualitätssicherung ist auch die Nachfrage an zertifizierten Referenzmaterialien (ZRM) in den letzten Jahren deutlich gestiegen. Dem steht derzeit jedoch nur eine sehr begrenzte Auswahl geeigneter ZRM gegenüber.
The title compound [systematic name: (2R,3R,4S,5R,6R) 2-(acetoxymethyl)-6-propoxytetrahydro-2H-pyran-3,4,5-triyl triacetate], C17H26O10, was formed by a Koenigs-Knorr reaction of 2,3,4,6-tetra-O-acetyl-α-D-glucopyranosyl bromide and n-propanol. The central ring adopts a chair conformation. The crystal does not contain any significant interactions such as hydrogen bonds.
The title compound, {2-[(2-carbamoylethyl)amino]-3-methylpentanoic acid}, C9H18N2O3, is of interest with respect to its biological activity. It was formed during an addition reaction between acrylamide and the amino acid isoleucine. The crystal structure is a three-dimensional network built up by intermolecular N–H···O and O–H···N hydrogen bonds.
The performance of twelve laboratories with previously established proficiency in the determination of the mineral oil content in a fresh water sediment is described. The summation parameter total petrol hydrocarbon (TPH) is defined according to ISO 16703:2004 with regard to the sample preparation to be applied, the flame ionisation detection (FID) and the boiling range of C10C40 to be integrated. Comprehensive tests of homogeneity and stability have been carried out on the candidate material using appropriate models. The outcome of the study served as the basis for the certification of the candidate reference material as ERM-CC015a. The certified mass fraction is 1,820±130mgkg-1 and traceability was established by using an appropriate calibration standard certified for the mass fraction of C10C40. The interlaboratory scatter of measurement results in this exercise can largely be explained by the variability of the individual calibrations based on this common calibration standard.
Crystals of the title compound, C18H26O2, were grown from ethyl acetate. Due to the racemic precursor, the title compound is also obtained as a racemate. Disorder was observed during structure refinement, originating from two possible half-chair conformations of the non-aromatic ring. The disorder was refined by introducing split positions in the cyclo-hexane ring regarding the two possible R and S-enantiomers at the chiral CH group [ratio 0.744 (3):0.256 (3)]. The crystal structure features pairs of inversion-related molecules connected by pairs of non-classical C–H···O hydrogen bonds.
Ziel der vorliegenden Untersuchungen, die im Rahmen einer Diplomarbeit der Fachhochschule Lausitz/Senftenberg an der BAM durchgeführt wurden, war ein Vergleich unterschiedlicher Extraktionsverfahren für die Bestimmung von extrahierbarem organischem Halogen (EOX) in Bodenproben. EOX ist ein für die rasche Bewertung der Organochlor- Belastung kontaminationsverdächtiger Flächen wertvoller Summenparameter, der sämtliche mit organischen Lösungsmittel extrahierbare Organohalogenverbindungen erfasst. Gegenwärtig existiert jedoch kein für die Bodenanalytik genormtes Verfahren für die Durchführung von EOX-Bestimmungen. Daher wird in der Praxis auf das für Schlämme und Sedimente entwickelte Verfahren nach DIN 38414 S17 (1990) zurückgegriffen, so auch in der Bundesbodenschutz- und Altlasten-Verordung (BBodSchV). Literaturangaben und Erfahrungen mit der Wiederfindungsrate polarer Extraktionsmittel und moderner Extraktionsverfahren bei Organochlorpestiziden, die eine bedeutende Quelle für EOX in Schlämmen und Böden darstellen, lassen vermuten, dass das genannte Normverfahren systematisch zu Unterbefunden neigen könnte. Für die Untersuchungen wurden an der BAM entwickelte Boden-Referenzmaterialien mit "natürlicher", über jahrzehntelangen Eintrag entstandener DDT- und Lindan-Belastung verwendet. Neben den klassischen Extraktionsverfahren nach Soxhlet kamen die ultraschallunterstützte Extraktion, die Mikrowellen- und die beschleunigte Lösungsmittelextraktion (ASE) jeweils mit Lösungsmitteln unterschiedlicher Polarität zum Einsatz. Extraktionsausbeuten und Wiederholpräzision der einzelnen Varianten wurden verglichen und vor dem Hintergrund der Ergebnisse unabhängiger Verfahren wie der gaschromatographischen Bestimmung der einzelnen Organochlorverbindungen bewertet. Die Polarität des Extraktionsmittels weist auch bei trockenen Böden den größten Einfluss auf die Extraktionsausbeuten der in den untersuchten Proben enthaltenen Organochlorverbindungen auf. Die Mischung Hexan/Aceton (1:1), die sich für die Extraktion verschiedener organischer Parameter bewährt hat, ist hinsichtlich der EOX-Analytik der existierenden Norm überlegen.
Lysergol monohydrate
(2012)
In the title compound [systematic name: (7-methyl-4,6,6a,7,8,9-hexahydroindolo[4,3,2-fg]quinoline-9-yl)methanol monohydrate], C16H18N2O·H2O, the non-aromatic ring (ring C of the ergoline skeleton) directly fused to the aromatic rings is nearly planar, with a maximum deviation of 0.659 (3) Å, and shows an envelope conformation. In the crystal, hydrogen bonds between the lysergol and water molecules contribute to the formation of layers parallel to (10-2).
The fungus Claviceps purpurea grows on grasses
and cereal grains and produces six predominant ergot
alkaloids. These toxic substances undergo different transformation
reactions during storage and cereal processing. One
of these reactions is the addition of water to a double bond in
the ergoline skeleton. Since light is required for this process,
the substances formed were named lumi-ergot alkaloids.
From these, a new asymmetric carbon and consequently two
epimers with different polarities are formed. For investigations
of lumi-ergot alkaloids, ergometrine was used exemplarily
as it represents one of the six ergot alkaloids
predominantly formed by Claviceps purpurea. The main
reaction product, the less polar compound of the two lumiergometrine
epimers, was separated by HPLC and unambiguously
identified as 10-(S)-lumi-ergometrine using X-ray
structural analysis. A HPLC-MS/MS method was developed
for the detection of this substance in sclerotia extracts. Using
this method, the existence of both epimeric forms of lumiergometrine
could be proved in the sclerotia. This is the first
time that the existence of a lumi-transformation product of
ergot alkaloids was proved in naturally grown samples.
High-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) can be used for simultaneous quantification of various mycotoxins in contaminated food samples. Therefore, multi-mycotoxin methods have been developed in the last couple of years. To enlarge these methods for further analytes, we have developed a LC-MS/MS method for the quantification of the mycotoxin aurofusarin. Additionally, further LC-MSn experiments were performed to demonstrate the fragmentation pattern of aurofusarin. Applicable multiple reaction monitoring (MRM) transitions of aurofusarin were found and optimized by parameter variation of the tandem mass spectrometer. The applicability of the developed method was tested by analysis of naturally contaminated wheat.
A method has been derived to completely recover mineral oil dispersed in water. The method involves three steps: the emulsification of the mineral oil by adding amphiphiles, the breaking of the emulsion by adding salts and the extraction of the mineral oil by a non-polar aprotic solvent. Various amphiphiles and types and concentrations of salts were tested. By using amphiphiles with HLB numbers in the range 4.7 to 40 a complete recovery of the mineral oil could be obtained for a combination of salts Na2SO4 + NaH2PO4 with total ionic strength of 6 mol/L.
A method for the determination of the novel brominated flame retardant tetrabromobisphenol A bis(2,3-dibromopropylether), 1,1'-(isopropylidene)bis[3,5-dibromo-4-(2,3-dibromo-propoxy)-benzene] (TBBPA-dbpe), was developed. Technical TBBPA-dbpe was purified and the results of a thorough physical characterisation are reported. The application of APCI-MS is discussed and the fragmentation patterns are described. Quantification of TBBPA-dbpe was done by HPLC-DAD using external calibration. The validation of the method was accomplished using sediment and sewage sludge samples spiked with defined amounts of authentic TBBPA-dbpe. The average recovery rates of TBBPA-dbpe from spiked samples ranged from 35 to 91% (sediment) and from 57 to 98% (sewage sludge) depending on the respective extraction method. Pressurised fluid extraction (PFE) and fluidised bed extraction were superior to classical Soxhlet and sonication procedures and yielded recovery rates between 90 and 98% with relative standard deviations of 2%. The limits of detection (DTC), identification (ID) and determination (DTM) using HPLC-DAD were 10, 21 and 30 ng g-1 in sediment and 22, 44 and 72 ng g-1 in sewage sludge, respectively.
The role of matrix reference materials in the process of demonstrating the degree of equivalence of measurement results obtained from intercomparisons is outlined, reviewing exemplary selected experience gained at BAM regarding the determination of organic contaminants in environmental matrices.
The specific characteristics of reference materials employed in the process of demonstrating equivalence between laboratories in the course of proficiency testing as well as the development, comparison and validation of methods are elaborated. The demand is for series of appropriately characterised samples which are fit for the purpose and it is seen from representative examples that the utilisation of such tailor-made RM designed to tackle the specific need of an analytical problem dominates over certified matrix reference materials in this context. Concluding, the role of certified matrix reference materials in quality assurance is briefly looked at both from the users and providers points of view.
In vitro cultured lung cancer cells are not suitable for animal-based breath biomarker detection
(2015)
In vitro cultured lung cancer cell lines were investigated regarding the possible identification of volatile organic compounds as potential biomarkers. Gas samples from the headspace of pure culture medium and from the cultures of human lung adenocarcinoma cell lines A549 and Lu7466 were exposed to polypropylene fleece in order to absorb odour components. Sniffer dogs were trained with loaded fleeces of both cell lines, and honey bees were trained with fleeces exposed to A549. Afterwards, their ability to distinguish between cell-free culture medium odour and lung cancer cell odour was tested. Neither bees nor dogs were able to discriminate between odours from the cancer cell cultures and the pure culture medium. Solid phase micro extraction followed by gas chromatography with mass selective detection produced profiles of volatiles from the headspace offered to the animals. The profiles from the cell lines were largely similar; distinct differences were based on the decrease of volatile culture medium components due to the cells' metabolic activity. In summary, cultured lung cancer cell lines do not produce any biomarkers recognizable by animals or gas chromatographic analysis.
The nature and concentrations of volatile organic compounds (VOCs) in chars generated by hydrothermal carbonization (HTC) is of concern considering their application as soil amendment. Therefore, the presence of VOCs in solid HTC products obtained from wheat straw, biogas digestate and four woody materials was investigated using headspace gas chromatography. A variety of potentially harmful benzenic, phenolic and furanic volatiles along with various aldehydes and ketones were identified in feedstock- and temperature-specific patterns. The total amount of VOCs observed after equilibration between headspace and char samples produced at 270 °C ranged between 2000 and 16,000 µg/g (0.2–1.6 wt.%). Depending on feedstock 50–9000 µg/g of benzenes and 300–1800 µg/g of phenols were observed. Substances potentially harmful to soil ecology such as benzofurans (200–800 µg/g) and p-cymene (up to 6000 µg/g in pine wood char) exhibited concentrations that suggest restrained application of fresh hydrochar as soil amendment or for water purification.
Process waters obtained from hydrothermal carbonization (HTC) of wheat straw, a biogas digestate derived thereof, and four woody biomass feedstocks were quantified regarding the total organic carbon (TOC) and selected organic compounds. HTC runs revealed that TOC loads were largely unaffected by process severity or type of feedstock whereas the C2–C6 fatty acids, determined by GC, displayed clear effects of temperature and feedstock. HPLC demonstrated simultaneously the initial increase and subsequent consumption of cellulose-derived furfural and 5-hydroxymethylfurfural as well as the increase of the lignin-derived 2-methoxyphenol. 2-Methylbenzofuran, an example for a substance potentially harmful to aquatic biota, was observed in high concentration in the HTC liquor from wheat straw-based feedstocks.
The reliability in measurement results obtained during environmental monitoring is crucial for the assessment and further planning of remediation efforts on the respective contaminated sites by the responsible authorities. A case study concerned with groundwater contaminated with perchloroethylene, trichloroethylene and 1,1,2-trichlorotrifluoroethane including their degradation products which involves private contract laboratories and an independent provider of quality assurance (QA) is presented. The experience gained with biannual monitoring campaigns over 14 years indicates that the selection of contractors on basis of accreditation status and successful performance in interlaboratory comparisons are not sufficient. Rather the auditing of the contractors by the QA provider prior to each campaign and the crosschecking of selected monitoring samples by the QA provider led to a lasting improvement of reliability in the contractors' measurement results. A mean deviation of 20% from the reference value determined by the QA provider for the crosschecked samples was reached.
Hexabromocyclododecane enantiomers: microsomal degradation and patterns of hydroxylated metabolites
(2011)
The degradation of the enantiomers of α-, β-, and γ-hexabromocyclododecane (HBCD) by phase I metabolism was investigated using induced rat liver microsomes. HBCD isomers were quantified using HPLC-MS/MS (ESI-) after separation on a combination of a reversed phase and a chiral analytical column. The degradation of all six isomers followed first-order kinetics and the estimated half-lives ranged from 6.3 min for both β-HBCD enantiomers to 32.3 min in case of (+)-γ-HBCD. (+)-α- and (–)-γ-HBCD displayed significantly shorter half-lives than their corresponding antipodes. It could be shown that this degradation led to a significant enrichment of the first eluting enantiomers (–)-α- and (+)-γ-HBCD. Individual patterns of mono- and dihydroxylated derivatives obtained from each α- and γ-HBCD enantiomer were seen to be distinctly characteristic. The patterns of monohydroxylated HBCD derivatives detected in liver and muscle tissues of pollack, mackerel and in herring gull eggs were largely similar to those observed in the in vitro experiments with rat liver microsomes. This enabled individual hydroxy-HBCDs to be assigned to their respective parent HBCD enantiomers.
HBCD stereoisomer pattern in mirror carps following dietary exposure to pure Gamma-HBCD enantiomers
(2010)
HBCD isomers: degradation rates and hydroxylated products from microsome incubation experiments
(2010)
Ziel des Forschungsprojektes war es, systematische Untersuchungen der Verfahrensschritte für die gas-chromatographische Bestimmung von Mineralölkohlenwasserstoffen (MKW) in Feststoffen aus dem Altlastenbereich entsprechend der Methode des Fachgremiums Altlastenanalytik (FGAA) sowie des Verfahrens ISO/DIS 16703 durchzuführen, Wege zur Optimierung einzelner Verfahrensschritte aufzuzeigen und beide Verfahren miteinander zu vergleichen. Es wurden Untersuchungen zu den Verfahrensschritten Extraktion, Extraktreinigung, Messung und Integration durchgeführt. Im Ergebnis der Untersuchungen wurde festgestellt, dass die Extraktion von Feststoffproben (20 g) mit einem Extraktionsvolumen von mind. 40 mL Aceton und 20 mL n-Heptan erfolgen muss, um eine zufriedenstellende Extraktionsausbeute zu gewährleisten. Im Rahmen dieses Projektes wurde ein Rechenprogramm für die Bestimmung der Rest- Aceton-Konzentration in Heptan-Extrakten erstellt. Mit diesem Programm können auch die Wasservolumina ermittelt werden, die für eine gewünschte Rest-Aceton-Konzentration notwendig sind. Anhand von Bodenextrakten, PAK-, Stearylstearat- und Triglycerid-Standardlösungen wurde nachgewiesen, dass die Säulen-Technik eine wesentlich effektivere Extraktreinigung bewirkt als das sogenannte Batch-(Schüttel-) Verfahren. In einem Modellversuch an drei verschiedenen Bodenextrakten wurde gezeigt, dass die zwischen FGAA- und ISO-Verfahren unterschiedliche Art der Peak-Integration eines GC-FID Chromatogramms zwischen n-Dekan (C10) und n-Tetracontan (C40) keinen Einfluss auf das Endergebnis hat. Eine Basislinienkorrektur des Proben-Chromatogramms ist daher nicht erforderlich. Das FGAA-Verfahren enthält in seiner Vorschrift für die Berechnung des MKW-Gehalts im Probenmaterial einen systematischen Fehler von etwa 8 %. Dieser Fehler entsteht durch den Unterschied zwischen dem theoretischen Extraktvolumen von 150 mL und dem realen Extraktvolumen von etwa 139 mL. Dieser systematische Fehler sollte in einer nachfolgenden Fassung des FGAA-Verfahrens vermieden werden.
Germination induces the glucosylation of the Fusarium mycotoxin deoxynivalenol in various grains
(2012)
In food, the mycotoxin deoxynivalenol (DON) often occurs in conjunction with its 3-β-D-glucopyranoside (D3G). The transformation of DON to D3G through glucosylation is catalysed by plant enzymes, however, the exact circumstances are not well understood. In order to investigate the role of enzymatic glucosylation in germinating grains, DON treated kernels were steeped and germinated under laboratory conditions. Furthermore, the effect of malting on the DON content of the contaminated barley was investigated. In all cases, DON and its derivatives were quantified by HPLC-MS/MS before, during and after the experiments. Amongst the six tested cereals; wheat, rye, barley, spelt, and millet transformed DON to D3G during germination whilst the oats were inactive. For wheat, barley, and spelt the initial DON content was reduced by 50%, with the loss being almost entirely accounted for by D3G formation. As D3G might be cleaved during digestion, the elevated D3G concentration may obscure the toxicologically relevant DON content in processed food and beer. The germination process has a major influence on the 'masking' of DON, leading to high quantities of D3G that may be missed in common mycotoxin analyses.
The 2-year international joint project HYCREF (Contract-No. G6RD-CT-2002-00854), funded by the European Commission in the 5th Framework programme, aimed to develop methods to prepare homogenous and stable water-, soil- and waste reference materials contaminated with mineral oil hydrocarbons and to test certify the mineral oil content by gas chromatographic methods. As mineral oil products are important sources for environmental contaminations, appropriate reference materials certified by using the new gas chromatographic methods (soil: ISO/FDIS 16703, waste: prEN 14039 and KW/04, water: ISO 9377-2) are highly needed. Additional to the HYCREF-results presented in part Imineral contaminated soilsthis second paper gives an overview of the feasibility study for the preparation and test certification of three waste reference materials (offshore marine sediment, building material and industrial waste). The following specifications, which had been defined in the project work plan, were reached successfully: uncertainty of the mineral oil content resulting from the certification exercise ≤ 5% and a between-bottle inhomogeneity of ≤ 3%. All three materials have been evaluated for long- and short term stability. They contain different levels and types of mineral oil and cover the full application range of ISO/FDIS 16703 and prEN 14039 (10010,000 mg/kg). The expanded uncertainties U cert of the three materials are about 6%. In this way, they are comparable to ERM®-CC015a (U cert=7.1%, mineral oil in a river sediment) and are suited to close the present gap of commercially available CRM for mineral oil determination in waste.
Feasibility and limits in preparation of reference materials for the organic emvironmental analysis
(1995)
Evaluierung der Fähigkeit zur Geruchsgeneralisierung und Differenzierung von Hunden im Modellversuch
(2015)
Ethanol/water solutions as certified reference materials for breath alcohol analyzer calibration
(2010)
The Federal Institute for Materials Research and Testing (BAM), Germany, has issued a series of large volume ethanol in water certified reference materials (CRMs), primarily developed for the calibration of evidential breath alcohol analyzers in Germany. The certified parameter is the ethanol mass concentration at 20 °C. When used in a wet bath simulator, the solutions deliver gas samples that meet the requirements set by the Organization of Legal Metrology for calibration of breathalyzers. The materials were prepared gravimetrically by spiking of ethanol into water in single 5 L units. A complete uncertainty budget for the preparation process has been established. The purity of the commercial ethanol stock solution was identified to be the main source of uncertainty. For stability and homogeneity measurements and for the verification of the gravimetric mass concentration of the CRMs, a robust high-precision gas chromatography, with flame-ionization detection method for ethanol determination in aqueous samples was developed and validated. The good performance of this method has been demonstrated in several international comparisons organized by the Consultative Committee for Amount of Substance-Metrology in Chemistry at the International Bureau of Weights and Measures.
Ergotaminine
(2012)
The title compound {systematic name: (6aR,9S)-N-[(2R,5S,10aS,10bS)-5-benzyl-10b-hydroxy-2-methyl-3,6-dioxooctahydro-8H-oxazolo[3,2-a]pyrrolo[2,1-c]pyrazin-2-yl]-7-methyl-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide}, C33H35N5O5, was formed by an epimerization reaction of ergotamine. The non-aromatic ring (ring C of the ergoline skeleton) directly fused to the aromatic rings is nearly planar [maximum deviation = 0.317 (4) Å] and shows an envelope conformation, whereas ring D, involved in an intramolecular N–H···N hydrogen bond exhibits a slightly distorted chair conformation. The structure displays chains running approximately parallel to the diagonal of bc plane that are formed through N–H···O hydrogen bonds.
Ergometrinine
(2010)
The absolute configuration of ergometrinine, C19H23N3O2 {systematic name: (6aR,9S)-N-[(S)-1-hydroxypropan-2-yl]-7-methyl-4,6,6a,7,8,9-hexahydroindolo[4,3-fg]quinoline-9-carboxamide}, was established based on epimerization reaction of ergometrine, which was followed by preparative HPLC. The non-aromatic ring (ring C of the ergoline skeleton) directly fused to the aromatic rings is nearly planar [maximum deviation = 0.271 (3) Å] and shows an envelope conformation, whereas ring D, involved in an intramolecular N-HN hydrogen bond, exibits a slightly distorted chair conformation. The structure displays undulating layers in the ac plane formed by O-H...O and N-H...O hydrogen bonds.
Ziel des Vorhabens war die Erarbeitung und Validierung eines standardisierbaren Analysenverfahrens für die Bestimmung von leichtflüchtigen Halogenkohlenwasserstoffen (LHKW) und monoaromatischen Verbindungen wie Benzol, Toluol, Ethylbenzol und Xylolen (BTEX) in Boden, die Bereitstellung eines geeigneten Boden-Referenzmaterials dafür und die Durchführung eines Validierungsringversuches. Da die leichtflüchtigen Verbindungen in dem von den kontaminierten Standorten angeschafften Boden schon während des Verarbeitungsprozesses weitgehend verloren gegangen waren, wurde das LHKW- und BTEX-haltige Referenzmaterial durch Einzelflaschendotierung hergestellt. Eine bestimmte Menge eines im Rahmen eines vorhergehenden BMBF-Vorhabens (Förderkennzeichen 07 OTX 20/3) erhaltenen unbelasteten Ackerboden-Referenzmaterials wurde in Glasflaschen eingewogen und unter optimierten Bedingungen mit einer methanolischen Lösung, die ausgewählte leichtflüchtige Substanzen enthält, dotiert. Die anschließende Stabilitätsuntersuchung mit den so hergestellten Proben zeigte, dass es notwendig ist, die Bodenproben mit einem organischen Lösungsmittel (z. B. Methanol) zu überschichten, um Verluste der leichtflüchtigen organischen Substanzen so gering wie möglich zu halten. Die Voruntersuchungen haben gezeigt, dass die Wiederfindungsraten von LHKW und BTEX in Boden ohne Überschichtung sehr schlecht sind. Das erarbeitete Analysenverfahren liegt als Normvorschlag dem Normausschuss ISO/TC 190 - Soil quality vor und wurde im Rahmen eines Ringversuches mit den hergestellten Referenzmaterialien erfolgreich validiert. Das validierte Verfahren mit den Verfahrenskenndaten wurde als ISO DIS 22155 im September 2003 aktualisiert.
Entwicklung, Herstellung und Einsatz von Referenzmaterialien für die organische Umweltanalytik
(2000)
Entwicklung, Herstellung und Einsatz von Referenzmaterialien für die organische Umweltanalytik
(2000)
Im Rahmen eines vom Bundesministerium für Wirtschaft und Arbeit (BMWA) geförderten Projektes wird in Kooperation mit dem Verband deutscher Metallhändler (VDM) ein Verfahren zur Quantifizierung der PCB-Kongenere 28, 52, 101, 138, 153, 180 im Gehaltsbereich von 0,1 bis 20 mg in Kunststoffabfällen aus dem Altkabelrecycling entwickelt und validiert. Dazu werden repräsentative Referenzmaterialien für die Laboranalytik aus Granulaten verschiedener Kabelzerlegeprozesse hergestellt und charakterisiert. Die Methodenentwicklung umfasst mahl-, sieb- und schüttguttechnologische Aspekte sowie den Vergleich unterschiedlicher Extraktionsverfahren und chromatographischer Bedingungen. Das validierte Verfahren sieht die Mahlung der technischen Probe auf eine Kornobergrenze von 0,50 mm gefolgt von Extraktion mit einem unpolaren Lösungsmittel bei einer Einwaage von 4 g und gaschromatographischer Bestimmung vor. Die Bestimmungsgrenzen liegen zwischen 0,01 und 0,08 mg/kg. Bei sorgfältiger Wahl der chromatographischen Bedingungen sind Elektroneneinfang- und massenselektive Detektion (MS) gleichwertig. In Gegenwart größerer Mengen bestimmter Komponenten, die in einigen Kabeln enthalten sind, kann der Einsatz eines MS von Vorteil sein. Drei Referenzmaterialien mit Gehalten der genannten Kongenere zwischen 0,1 bis 5 mg/kg werden in einem abschließenden Ringversuch zur Validierung dieser Methode mit 23 ausgewählten Laboratorien eingesetzt. Dabei ergeben sich für die Quantifizierung dieser Kongenere relative Vergleichsstandardabweichungen zwischen 15 und 33 %. Das Verfahren wird in die europäische Normung (CEN 292 „Characterisation of Waste“) eingebracht.
1,2,5,6,9,10-Hexabromocyclododecane (HBCD) is a widely used flame retardant, which tends to persist in the environment and accumulates in biota. The six stereoisomers (three racemates named α-, β-, and γ-HBCD) of the technical mixture were isolated with high-performance liquid chromatography (HPLC). Direct separations were performed on a chiral stationary phase containing permethylated -cyclodextrin (NUCLEODEX -PM column) and the pure enantiomers of α-, β-, and γ-HBCD were physically characterized for the first time. The absolute configurations of all six isomers were determined by anomalous dispersion using single crystal X-ray crystallography. Optical rotations αD in tetrahydrofuran were +4.2/-4.0 (α-HBCD), +26.1/-27.5 (β-HBCD), and +68.0/-66.3 (γ-HBCD). The sense of rotation could be correlated with the absolute configurations of α-, β-, and γ-HBCD enantiomers and their order of elution on a chiral permethylated β-cyclodextrin-bonded stationary phase. The diastereomers α-, β-, and γ-HBCD displayed distinctly different melting points as well as 1H-, 13C NMR, and IR spectra.
Enantiomerenspezifischer Vergleich von HBCD-Gehalten maritimer Lebewesen zweier norwegischer Fjorde
(2010)
High-performance liquid chromatography tandem mass spectrometry (HPLC–MS/MS) was applied to sterospecifically quantify the content of α-, β-, and γ-hexabromocyclododecane (HBCD) in six fish species from the Norwegian Etnefjorden. A combination of a β-PM cyclodextrin and an achiral column enabled the paired chromatographic separation of the stereoisomers in the order (-)-α-, (+)-α-, (-)-β-, (+)-β-, (+)-γ- and, (-)-γ-HBCD. The limits of detection were in the range of 6–21 pg g-1 depending on the stereoisomer and the concentrations of α-, β-, and γ-HBCD in fillets ranged from <5.4 ng g-1 to 11.1 µg g-1 lipid weight. α-HBCD enantiomers were throughout dominating, and in most cases the accumulation of the respective first eluted enantiomers ((-)-α-, (-)-β- and (+)-γ-HBCD) was observed. Deviations from the racemic EF-value were considered to be significant if it was outside of the expanded uncertainty range for each of the racemic HBCD-ratios. The composition of HBCD isomers varied between the investigated fish species and the relative high values for the γ-HBCD concentrations for the bottom-dwellers flounder and thorny skate seems to echo the HBCD pattern of ocean sediments.
ISBN: Im Zuge der Harmonisierung der Rechtsvorschriften der Mitgliedsstaaten der Europäischen Gemeinschaft wurde im September 1996 die Richtlinie 96/59/EG des Rates über die Beseitigung polychlorierter Biphenyle und polychlorierter Terphenyle (PCB/PCT) verabschiedet. Ziel dieser Richtlinie ist die Angleichung der Rechtsvorschriften der Mitgliedstaaten über die kontrollierte Beseitigung der PCB, die Dekontaminierung oder Beseitigung PCB-haltiger Geräte und die Beseitigung von PCB-Abfall. In der Bundesrepublik Deutschland wurde mit der Verabschiedung der PCB/PCT- Abfallverordnung vom 26. Juni 2000 die EU-Richtlinie umgesetzt. Entsprechend der PCB/PCT-Abfallverordnung wird für PCB-haltigen Abfall ein Grenzwert von 50 mg/kg festgelegt. Beim Haupteinsatzgebiet der PCB - als Isolierflüssigkeiten in Transformatoren - ist die Bestimmung des PCB-Gehaltes durch DIN-Normen geregelt. Polychlorierte Biphenyle wurden auch als Weichmacher in Dichtungsmassen und Kunststoffen, z.B. in Kabelummantelungen, und als Flammschutzmittelanstrich für Holz eingesetzt. Für feste Abfallmatrices gibt es keine verbindliche Prüfvorschrift. Ziel des Projektes war die Erarbeitung und Validierung eines Prüfverfahrens zur Bestimmung von PCB und PCT in organischen Abfallmatrices wie Kabelshredder und Altholz.
A novel, cost-efficient method for the analytical extraction of the Fusarium mycotoxin zearalenone (ZON) from edible oils by dynamic covalent hydrazine chemistry (DCHC) was developed and validated for its application with high performance liquid chromatography-fluorescence detection (HPLC-FLD). ZON is extracted from the edible oil by hydrazone formation on a polymer resin functionalised with hydrazine groups and subsequently released by hydrolysis. Specifity and precision of this approach are superior to liquid partitioning or gel permeation chromatography (GPC). DCHC also extracts zearalanone (ZAN) but not α-/β-zearalenol or -zearalanol. The hydrodynamic properties of ZON, which were estimated using molecular simulation data, indicate that the compound is unaffected by nanofiltration through the resin pores and thus selectively extracted. The method's levels of detection and quantification are 10 and 30 µg/kg, using 0.2 g of sample. Linearity is given in the range of 10-20,000 µg/kg, the average recovery being 89%. Bias and relative standard deviations do not exceed 7%. In a sample survey of 44 commercial edible oils based on various agricultural commodities (maize, olives, nuts, seeds, etc.) ZON was detected in four maize oil samples, the average content in the positive samples being 99 µg/kg. The HPLC-FLD results were confirmed by HPLC-tandem mass spectrometry and compared to those obtained by a liquid partitioning based sample preparation procedure.
Distribution of Trichothecenes, Zearalenone, and Ergosterol in a Fractionated Wheat Harvest Lot
(2008)
To investigate possible co-occurrences of type B trichothecenes and zearalenone within a Fusarium culmorum-infected wheat harvest lot, kernels were fractionated into six groups by visual criteria. The Fusarium-damaged kernels were subdivided into white, shrunken, and red kernel groups, and the remaining kernels were sorted into healthy, black spotted, and nonspecific groups. The distribution patterns of nivalenol, deoxynivalenol, zearalenone, and ergosterol were determined for possible correlations. Significant correlations between the distribution patterns were found for the mycotoxins and ergosterol for the grouped kernels (r = 0.997-0.999, p < 0.0001). Additionally, remarkably outstanding levels of nivalenol (24-fold more than the mean at 1.16 mg/kg), deoxynivalenol (27-fold more than the mean at 0.16 mg/kg), zearalenone (25-fold more than the mean at 77 µg/kg), and ergosterol (17-fold more than the mean at 13.4 mg/kg) were found in the red kernel group. Further, detailed mycotoxin and ergosterol analyses were carried out on various segments (kernel surface, conidia, bran, and flour) of the red kernels. However, the mycotoxin and ergosterol distribution profiles revealed nonsignificant correlations for these kernel segments, with the exception of deoxynivalenol and nivalenol, which were moderately correlated (r = 0.948, p = 0.035).