Filtern
Dokumenttyp
Sprache
- Englisch (3)
Referierte Publikation
- ja (3)
Schlagworte
- Analysis (1)
- Biochar (1)
- Biofuel (1)
- Char conversion (1)
- Char reactivity (1)
- Hydroliquefaction (1)
- Interlaboratory comparison (1)
- Lignin (1)
- Pyrolysis (1)
- Ring test (1)
Organisationseinheit der BAM
Towards the standardization of biochar analysis: the COST action TD1107 interlaboratory comparison
(2016)
Biochar produced by pyrolysis of organic residues is increasingly used for soil amendment and many other applications. However, analytical methods for its physical and chemical characterization are yet far from being specifically adapted, optimized, and standardized. Therefore, COST Action TD1107 conducted an interlaboratory comparison in which 22 laboratories from 12 countries analyzed three different types of biochar for 38 physical–chemical parameters (macro- and microelements, heavy metals, polycyclic aromatic hydrocarbons, pH, electrical conductivity, and specific surface area) with their preferential methods. The data were evaluated in detail using professional interlaboratory testing software. Whereas intralaboratory repeatability was generally good or at least acceptable, interlaboratory reproducibility was mostly not (20% < mean reproducibility standard deviation < 460%). This paper contributes to better comparability of biochar data published already and provides recommendations to improve and harmonize specific methods for biochar analysis in the future.
The influence of heterogeneous secondary reactions on char oxidation reactivity, which can take place during slow pyrolysis processes in a woody biomass particle, is analyzed in this study. To this end, the oxidative behavior of primary char produced in a thermobalance with initial wood masses of a few milligrams is compared to the behavior of char produced under conditions enhancing secondary reactions, i.e., large particle and bed sizes in fixed-bed reactors. The influence of the Maximum conversion temperature, heating rate, and catalytic effect of inorganics is also studied to compare the effect of each parameter.
Results show that a significant reduction in reactivity takes place when char is produced under conditions enhancing These secondary reactions during pyrolysis. The effect is of similar order as the effect as a result of thermal annealing at 900 °C or the catalytic effect of alkali and alkaline earth metals. Therefore, the presence of heterogeneous secondary reactions during pyrolysis should be taken into account in studies addressing biomass char reactivity. Furthermore, it is shown that the reduction of reactivity as a result of secondary reactions is related to neither the loss of oxygen-containing functional groups nor the potential blocking of pores, specially micropores, resulting from the formation of this secondary char. The explanation may, therefore, lie on the deactivation or blocking of active sites by the secondary char.
Hydroliquefaction is a possible pathway to produce liquid transportation fuels from solid feedstocks like coal or biomass. Though much effort has been put into the investigation of maximizing the oil yield using expensive catalysts and pasting oils in batch setups, little is known about how to commercialize the process. This work aims at the demonstration of lignin hydroliquefaction under conditions interesting for commercial operation. The results from hydroliquefaction experiments of two different lignin types using a cheap iron-based catalyst and anthracene oil as the pasting oil in a semibatch system are presented here. Oil yields of above 50% are reached without observing coke formation. Extensive analyses of the feedstocks and product oils were performed. The process supplies high-quality oil, while differences in the decomposition path of both lignin types are observed. An high heating value of 39 400 J/g and H/C and O/C ratios of up to 1.6 and 0.1, respectively, are detected for the produced bio-oils.