Filtern
Erscheinungsjahr
Dokumenttyp
Referierte Publikation
- ja (78) (entfernen)
Schlagworte
- Sewage sludge ash (23)
- Phosphorus recovery (13)
- Phosphorus (12)
- Sewage sludge (8)
- Fertilizer (7)
- Thermochemical treatment (7)
- Wastewater (5)
- Soil (4)
- X-ray absorption near-edge structure (XANES) spectroscopy (4)
- Aluminium phosphate (3)
- Diffusive gradients in thin films (DGT) (3)
- Klärschlammasche (3)
- Phosphor (3)
- Phosphorus fertilizer (3)
- Raman microspectroscopy (3)
- Recycling fertilizer (3)
- Struvite (3)
- Urban mining (3)
- X-ray diffraction (3)
- XANES spectroscopy (3)
- Ash (2)
- Bioavailability (2)
- Chromium (2)
- Critical raw materials (2)
- Fertilzer (2)
- Heavy metal evaporation (2)
- Heavy metal removal (2)
- Incinerator ash (2)
- Klärschlamm (2)
- Leaching (2)
- Mercury (2)
- P-Düngemittel (2)
- P-recovery (2)
- Phosphorus recycling (2)
- Plant availability (2)
- Rare earth elements (2)
- Recovery (2)
- Recovery potential (2)
- Reducing conditions (2)
- Ressource (2)
- Scandium (2)
- Adsorption (1)
- Aerodynamic levitation (1)
- Agronomic performance (1)
- AlPO4 (1)
- Aluminium (1)
- Aluminum phosphate (1)
- Ammonium (1)
- Arc furnace (1)
- Ash treatment (1)
- AshDec (1)
- Ashes (1)
- BOFS (1)
- Bauxite Residue (1)
- Bauxite residue (1)
- Beta-christobalite structure type (1)
- Bioceramics (1)
- Blast-furnace sludge (1)
- Bottom ash (1)
- Building and Construction (1)
- By-product (1)
- CaNaPO4 (1)
- Calcium alkali phosphate (1)
- Calcium silicate (1)
- Chemical extraction (1)
- Chemical extraction methods (1)
- Chemical extraction tests (1)
- Chemical stabilization of high-temperature forms (1)
- Chicken manure ash (1)
- Chlorine (1)
- Chromium recovery (1)
- Chromium speciation (1)
- Circular economy (1)
- Combustion and gasification (1)
- Computer Science Applications (1)
- Corrosion (1)
- Cristobalite form (1)
- Crystalline phase identification (1)
- Deep ultraviolet (DUV) Raman microspectroscopy (1)
- Demonstrationsanlage (1)
- Denitrification rate (1)
- Design of experiments (1)
- Diffusive Gradients in Thin-films (DGT) (1)
- Diffusive Gradients in thin films (DGT) (1)
- EBPR (1)
- Education (1)
- Electric arc furnace dust (1)
- Elemental analysis (1)
- Entropy (1)
- Environmental evaluation (1)
- Extraction (1)
- FT-IR gas analysis (1)
- Far-infrared spectroscopy (1)
- Fertiliser (1)
- Fertilizers (1)
- Fluorescence lamps (1)
- Fly ash (1)
- Forest soils (1)
- Formation enthalpy (1)
- General Materials Science (1)
- Glycogen (1)
- Gypsum plasterboards (1)
- Gypsum waste (1)
- HF (1)
- Hazardous waste (1)
- Hazenite (1)
- Heat capacity (1)
- Heavy metal chloride (1)
- Heavy metal elimination (1)
- Hg distribution (1)
- High-alloyed steel (1)
- High-cristobalite form (1)
- Hydration products (1)
- Hydrofluorination (1)
- ICP-MS (1)
- ICP-OES (1)
- In situ synchrotron x-ray diffraction (1)
- Incinerator (1)
- Incubated soil/fertilizer mixtures (1)
- Information Systems (1)
- Infrared (1)
- Infrared spectroscopy (1)
- Interlaboratory comparison (1)
- Internal substrate (1)
- Iron (1)
- Klärschlammaschen (1)
- Library and Information Sciences (1)
- Low-temperature-conversion (1)
- MBR (1)
- MSWI fly ash (1)
- Matrix dependencies (1)
- Mercury selenide (HgSe) (1)
- Metabolism (1)
- Metal fluorides (1)
- Microspectroscopy (1)
- Microwave-assisted digestion (1)
- Mid-infrared spectroscopy (1)
- Mineral phases (1)
- Mineralische Phasen (1)
- Monitoring (1)
- Mono-incineration (1)
- Multidisciplinary (1)
- Municipal sewage sludge (1)
- NE-Metalle (1)
- NPK fertilizer (1)
- Nano-Fourier-transform infrared spectroscopy (1)
- Nanochrystalline AlPO4 (1)
- Nitrification inhibitor (1)
- Nonferrous metals (1)
- Nutrient (1)
- Oxide melts (1)
- P fertilizer (1)
- P recycling (1)
- P sink method (1)
- P solubility (1)
- P speciation (1)
- P-efficiency (1)
- P-fertilizer (1)
- P-fractionation (1)
- P-plant-availability (1)
- Phase formation (1)
- Phase transformation (1)
- Phoshorrückgewinnung (1)
- Phoshpor availability (1)
- Phosphate (1)
- Phosphate dynamics (1)
- Phosphate extractability and availability (1)
- Phosphate recovery (1)
- Phosphate-bearing mineral phases (1)
- Phosphorus availability (1)
- Phosphorus compounds (1)
- Phosphorus elimination (1)
- Phosphorus plant-availability (1)
- Phosphorus speciation (1)
- Phosphorus-fertiliser (1)
- Phosphous recovery (1)
- Photometric P determination (1)
- Plant growth experiments (1)
- Pollutant (1)
- Polyvinylchloride (PVC) (1)
- Post-denitrification (1)
- Pot experiments (1)
- Process upscaling (1)
- Raman (1)
- Raman spectroscopy (1)
- Recycled gypsum (1)
- Recycled sources (1)
- Recycling (1)
- Recycling fertilizers (1)
- Red Mud (1)
- Red mud (1)
- Reductive melting (1)
- Resource Recovery (1)
- Rhenanite (1)
- Rostaschen (1)
- Sc recovery (1)
- Scattering-type scanning near-field optical microscopy (s-SNOM) (1)
- Secondary P-fertilizer (1)
- Selective Chlorination (1)
- Selective chlorination (1)
- Selenium (1)
- Sewage Sludge (1)
- Sewage Sludge Ashes (1)
- Sewage sludge ash (SSA) (1)
- Sewage sludge disposal (1)
- Silicate (1)
- Silicon carbide (1)
- Slag (1)
- Slag treatment (1)
- Sodium sulfate (1)
- Soil testing (1)
- Solubility in ammonium citrate (1)
- Stabilization of high-temperature phase at RT (1)
- Stacking disorder (1)
- Statistics and Probability (1)
- Statistics, Probability and Uncertainty (1)
- Sugar cane bagasse (1)
- Sulfur (1)
- Sustainability (1)
- Synchrotron infrared microspectroscopy (1)
- Synchrotron radiation (1)
- Thermal analysis (1)
- Thermal treatment (1)
- Thermochemische Stofftrennung (1)
- Thermodynamic simulation (1)
- Thermogravimetry/FT-IR (1)
- Tridymite (1)
- Tridymite form (1)
- Ultraviolet (1)
- VOC (1)
- Verfahrensentwicklung (1)
- Waste (1)
- Wertstoffrückgewinnung (1)
- Whitlockite-to-buchwaldite transformation (1)
- Wood ash (1)
- X-ray absorption near edge structure (XANES) spectroscopy (1)
- X-ray absorption near-edge structure (XANES) (1)
- X-ray absorption spectroscopy (1)
- X-ray adsorption near-edge structure (XANES) spectroscopy (1)
- X-ray diffraction (XRD) (1)
- XANES (1)
- XRD (1)
- Yttrium (1)
- Zeolithe (1)
- Zinc (1)
- Zinc chloride (1)
- microspectroscopy (1)
- soil (1)
- x-ray diffraction (1)
Organisationseinheit der BAM
- 4 Material und Umwelt (35)
- 4.4 Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung (35)
- 4.3 Schadstofftransfer und Umwelttechnologien (7)
- 6 Materialchemie (3)
- 7 Bauwerkssicherheit (3)
- 7.4 Baustofftechnologie (3)
- 1 Analytische Chemie; Referenzmaterialien (2)
- 6.3 Strukturanalytik (2)
- 7.1 Baustoffe (2)
- 1.4 Prozessanalytik (1)
Paper des Monats
- ja (3)
Sewage sludge ash (SSA) is a suitable raw material for fertilizers due to its high phosphorus (P) content. However, heavy metals must be removed before agricultural application and P should be transferred into a bioavailable form. The utilization of gaseous hydrochloric acid for thermochemical heavy metal removal from SSA at approximately 1000 °C was investigated and compared to the utilization of alkaline earth metal chlorides. The heavy metal removal efficiency increased as expected with higher gas concentration, longer retention time and higher temperature. Equivalent heavy metal removal efficiency were achieved with these different Cl-donors under comparable conditions (150 g Cl/kg SSA, 1000 °C). In contrast, the bioavailability of the P-bearing compounds present in the SSA after thermal treatment with gaseous HCl was not as good as the bioavailability of the P-bearing compounds formed by the utilization of magnesium chloride. This disadvantage was overcome by mixing MgCO3 as an Mg-donor to the SSA before thermochemical treatment with the gaseous Cl-donor. A test series under systematic variation of the operational parameters showed that copper removal is more depending on the retention time than the removal of zinc. Zn-removal was declined by a decreasing ratio of the partial pressures of ZnCl2 and water.
Phosphorus (P) is an essential element for all forms of life and is applied as fertilizer in agriculture. The P availability for plants may be highly dependent on the chemical state of P in fertilizers and soils; however, the nature of this dependence remains obscure due to the limitations of generally applied wet chemical and instrumental analytical approaches. This paper focuses on recently developed infrared, Raman, ultraviolet and X-ray microspectroscopic techniques for the characterization of P in soil. Microspectroscopic techniques have the advantage that discrete P phases can be distinguished and characterized even if their mass fractions are very low. However, only small volumes of soil can be analyzed by microspectroscopic methods hence a combination of macro- and microspectroscopic techniques is a promising concept.
Phosphorus (P) for fertilizer use can be recovered from sewage sludge ash (SSA). To enhance the bioavailability of P and reduce the heavy metal content of SSA, it can be treated thermochemically with Na2CO3 or Na2SO4 at 950 °C in a rotary kiln using dry sewage sludge or lignite as reducing agent. These processes were investigated by thermogravimetry/differential thermal analysis coupled with gas analysis. Reducing conditions in this experimental setup were provided by 2 % hydrogen in the Ar carrier gas. During SSA + Na2CO3 treatment CO2, CO and water were detected in the off-gas. During SSA + Na2SO4 treatment SO2, some CO2 and water were detected. Heavy metal removal was more efficient for SSA + Na2CO3 compared to the sulfate variant. A SSA + Na2SO4 + lignite variant which also formed CO shifted the heavy metal removal to the results obtained with Na2CO3 which was obviously due to the additional reduction potential. However, Zn evaporation was not achieved with the Na2SO4 variants which were most probably due to immobilization as ZnS.
Chemical state of chromium, sulfur, and iron in sewage sludge ash based phosphorus fertilizers
(2015)
As an essential element of all life forms, phosphorus (P) is vital to the fertilizer industry. With decreasing quantity and quality of phosphate rock resources, recycling P-fertilizers from wastewater is of increasing interest. The P-fertilizer products of a recently developed thermochemical process for P recovery from sewage sludge ash (SSA) were investigated by chromium, sulfur, and iron K-edge X-ray near-edge structure (XANES) spectroscopy. This paper focuses the formation and prevention of toxic chromium(VI) and toxic sulfides during the thermochemical processes. Reducing conditions prevent the oxidation of chromium(III) in the SSA to toxic chromium(VI). Sulfides formed under the reducing conditions are nontoxic iron sulfides. Hematite (Fe2O3) present in the SSA is reduced to magnetite (Fe3O4). A gentle post-treatment at 400 °C under oxidizing conditions converts the iron sulfides into plant-available iron sulfates. This oxidative post-treatment does not form undesired chromium(VI) compounds.
Thermal treatment of chromium (III) oxide with carbonates analyzed by far-infrared spectroscopy
(2015)
In the near future, phosphorus (P) recycling will gain importance in terms of decreasing primary resources. Sewage sludge (SSL) is an adequate secondary P-resource for P-fertilizer production but it is also a sink for heavy metals and organic pollutants. The present study is an investigation on thermochemical P-recycling of SSL. Various temperatures and amendments were tested regarding their performance to remove heavy metals and polycyclic aromatic hydrocarbons (PAH) and simultaneous increase of the plant-availability of P. The investigations were carried out on two types of SSL originating from wastewater treatment plants with chemical P-precipitation and enhanced biological P-removal, respectively. The results show that thermochemical treatment with chlorine donors is suitable to remove the majority of heavy metals and that a combination of a gaseous chlorine donor (HCl) and sodium additives leads to both high heavy metal removal and high plant availability of P. Furthermore, plant experiments Show that almost all investigated thermochemical treatments can significantly reduce the bioavailability and plant uptake of heavy metals. Furthermore, PAHs are secondarily formed during low-temperature treatments (400–500 ° ), but can be significantly reduced by using sodium carbonate as an additive.
Microspectroscopy reveals dust-derived apatite grains in acidic, highly-weathered Hawaiian soils
(2021)
Dust deposition is an important source of phosphorus (P) to many ecosystems. However, there is little evidence of dust-derived P-containing minerals in soils. Here we studied P forms along a well-described climatic Gradient on Hawaii, which is also a dust deposition gradient. Soil mineralogy and soil P forms from six sites along the climatic gradient were analyzed with bulk (X-ray diffraction and P K-edge X-ray absorption near edge structure) and microscale (X-ray fluorescence, P K-edge X-ray absorption near edge structure, and Raman) analysis methods. In the wettest soils, apatite grains ranging from 5 to 30 μm in size were co-located at the micro-scale with quartz, a known continental dust indicator suggesting recent atmospheric deposition. In addition to co-location with quartz, further evidence of dust-derived P included backward trajectory modeling indicating that dust particles could be brought to Hawaii from the major global dust-loading areas in central Asia and northern Africa. Although it is not certain whether the individual observed apatite grains were derived from long-distance transport of dust, or from local dust sources such as volcanic ash or windblown fertilizer, these observations offer direct evidence that P-containing minerals have reached surface layers of highly-weathered grassland soils through atmospheric deposition.
The Brazilian sugarcane industry produced around 173 million tons (Mt) of bagasse in 2018. Bagasse is a by-product of juice extraction for ethanol and sugar production and is combusted in order to generate power, producing up to 10 Mt of ash per year. This ash contains various concentrations of plant nutrients, which allow the ash to be used as a crop fertilizer. However, the concentration and extractability of phosphorus (P), an essential plant nutrient, are low in bagasse ash. To increase the P content, we co-gasified and co-combusted bagasse with P-rich chicken manure. The resulting ash was thermochemically post-treated with alkali additives (Na2SO4 and K2SO4) to increase the availability of P to plants. We aimed to: (i) investigate the effect of thermochemical post-treatment of co-gasification residue and co-combustion ash on P availability to soybeans, (ii) explore the potential of chemical extraction methods (citric acid, neutral ammonium citrate, formic acid, and Mehlich-I) and diffusive gradients in thin films (DGT) to predict the availability of P to soybeans, and (iii) identify the responsible P-phases using X-ray diffraction . We evaluated P availability to soybeans growing in Brazilian Oxisol soil in two independent greenhouse pot experiments. The positive effect of thermochemical treatment on P availability from gasification residue was confirmed through the observation of increased P uptake and biomass in soybean plants. These findings were confirmed by chemical extraction methods and DGT. The gasification residue contained whitlockite as its main P-bearing phase. Thermochemical post-treatment converted whitlockite into highly soluble CaNaPO4. In contrast, co-combustion ash already contained highly soluble Ca(Na,K)PO4 as its main P-bearing phase, making thermochemical post-treatment unnecessary for increasing P availability. In conclusion, increased extractability and availability of P for soybeans were closely connected to the formation of calcium alkali phosphate. Our findings indicate that this combined methodology allows for the prediction of P-fertilization effects of ash.
Phosphorus (P) fertilizers from secondary resources became increasingly important in the last years. However, these novel P-fertilizers can also contain toxic pollutants such as chromium in its hexavalent state (Cr(VI)). This hazardous form of chromium is therefore regulated with low limit values for agricultural products even though the correct determination of Cr(VI) in these fertilizers may be hampered by redox processes, leading to false results. Thus, we applied the novel diffusive gradients in thin-films (DGT) technique for Cr(VI) in fertilizers and compared the results with the standard wet chemical extraction method (German norm DIN EN 15192) and Cr K-edge X-ray Absorption near-edge structure (XANES) spectroscopy. We determined an overall good correlation between the wet chemical extraction and the DGT method. DGT was very sensitive and for most tested materials selective for the analysis of Cr(VI) in P-fertilizers. However, hardly soluble Cr(VI) compounds cannot be detected with the DGT method since only mobile Cr(VI) is analyzed. Furthermore, Cr K-edge XANES spectroscopy showed that the DGT binding layer also adsorbs small amounts of mobile Cr(III) so that Cr(VI) values are overestimated. Since certain types of the P fertilizers contain mobile Cr(III) or partly immobile Cr(VI), it is necessary to optimize the DGT binding layers to avoid aforementioned over- or underestimation. Furthermore, our investigations showed that the Cr K-edge XANES spectroscopy technique is unsuitable to determine small amounts of Cr(VI) in fertilizers (below approx. 1% of Cr(VI) in relation to total Cr).
Phosphorus-fertilizers from secondary resources such as sewage sludge ash (SSA) will become more important in the future as they could substitute conventional fertilizers based on the nonrenewable resource phosphate rock. Thermochemical approaches were developed which remove heavy metals from SSA prior to its fertilizer application on farmlands. We analyzed the chemical state of mercury and selenium in SSA before and after thermochemical treatment under different conditions for P-fertilizer production by X-ray absorption near edge structure (XANES) spectroscopy. In some incineration plants the mercury loaded carbon adsorber from off-gas cleaning was collected together with the SSA for waste disposal. SSAs from those plants contained mercury mainly bound to carbon/organic material. The other SSAs contained inorganic mercury compounds which are most probably stabilized in the SSA matrix and were thus not evaporated during incineration. During thermochemical treatment, carbon-bound mercury was removed quantitatively. In contrast, a certain immobile fraction of inorganic mercury compounds remained in thermochemically treated SSA, which were not clearly identified. HgSe might be one of the inorganic compounds, which is supported by results of Se K-edge XANES spectroscopy. Furthermore, the chemical state of selenium in the SSAs was very sensitive to the conditions of the thermochemical treatment.