Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (52) (entfernen)
Sprache
- Englisch (50)
- Deutsch (1)
- Mehrsprachig (1)
Schlagworte
- Mechanochemistry (5)
- Nanoparticles (5)
- XRD (5)
- Catalysis (3)
- Alkaline earth metal coordination polymers (2)
- Aluminium (2)
- Brown-rot fungi (2)
- Coordination polymers (2)
- Doped systems (2)
- Fluorides (2)
- Heterogeneous catalysis (2)
- Lewis acid (2)
- Metal fluoride (2)
- Metal fluorides (2)
- Optical properties (2)
- Oxide (2)
- Pyridine (2)
- Quadrupolar nuclei (2)
- Quantitative NMR (2)
- Sol-gel (2)
- Sol-gel process (2)
- Solid state NMR (2)
- Termites (2)
- Wood protection (2)
- XPS (2)
- (NH4)3InF6 (1)
- 1,4-Dimethylpiperazinium chloroferrate(II,III) (1)
- 115In and 19F solid state NMR (1)
- 15N (1)
- 15N NMR (1)
- 27 Al MAS solid state NMR (1)
- 27Al NMR (1)
- 78.20.-e (1)
- 78.66.Li (1)
- 78.68.+m (1)
- 81.20.Fw (1)
- Ab initio structure determination (1)
- Acid site concentration (1)
- Acid surfaces (1)
- Acidity (1)
- Adsorption of pyridine (1)
- Aggregation (1)
- Alkaline earth metal fluorides (1)
- Aluminium fluoride (1)
- Aluminium fluorine (1)
- Aluminium-27 (1)
- Amorphous materials (1)
- Antiferromagnetic coupling (1)
- Au 4f referenced XPS data (1)
- Basidiomycetes (1)
- Bifunctional MgF2 (1)
- Brønsted (1)
- Building-blocks (1)
- Calciumfluorid (1)
- Carbohydrates (1)
- Carbon-fluorine bonds (1)
- Catalysts (1)
- Catalytic activity (1)
- Chemical exchange (1)
- Chemical shift trend analysis (1)
- Chrom (1)
- Colloidal particles (1)
- Coniophora puteana (1)
- Coprecipation (1)
- Core-shell nanoparticles (1)
- Cr2O3 powder (1)
- Crystal Structure (1)
- Crystalline aluminium fluorides (1)
- Crystalline aluminium hydroxy fluorides (1)
- Crystalline aluminium isopropoxide fluoride (1)
- Dispersion (1)
- ESR fine structure (1)
- EXAFS (1)
- Etal-complexes (1)
- Eu (1)
- Europium (1)
- Exchange-coupled units (1)
- FT IR (1)
- FTIR (1)
- Fluoride (1)
- Fluoride catalyst (1)
- Fluoride nanoparticles (1)
- Fluoride xerogels (1)
- Fluorine coordination (1)
- Fluorine coordination polymers (1)
- Fluorolysis (1)
- Fluorolytic sol-gel synthesis (1)
- Fluorolytic sol–gel synthesis (1)
- Fluorolytic sol−gel (1)
- Fluorosulfonic acid (1)
- Functionalization (1)
- Furan derivatives (1)
- Furfural (1)
- Gel synthesis (1)
- Germylium ions (1)
- Gold nanoparticles (1)
- HF (1)
- Halogenometallate (1)
- High field solid state NMR (1)
- High-resolution XPS (1)
- Holzschutzmittel (1)
- Hydrodefluorination (1)
- Hydrofluorination (1)
- Hydroxylated MgF2 (1)
- In situ (1)
- Infrared spectroscopy (1)
- Intramolecular reduction (1)
- Iron coordination (1)
- Katalyse (1)
- Kurvenglättung (1)
- Lanthanides doped coordination polymers (1)
- Lewis (1)
- Lewis-acids (1)
- Lewis/Bronsted (1)
- Lewis/Brønsted acid sites (1)
- Lithium-ion battery (1)
- Luminescence (1)
- Luminescence materials (1)
- Lumineszenz (1)
- MAS NMR (1)
- MAS NMR spectroscopy (1)
- MOF (1)
- MOFs (1)
- MQMAS (1)
- Magnesium fluoride (1)
- Magnetic susceptibility (1)
- Mechanochemical synthesis (1)
- MgF2 (1)
- Milling (1)
- Mixed valence chloroferrate (1)
- Molar extinction coefficient determination (1)
- Multiplet splitting (1)
- Mössbauer, Raman spectroscopy (1)
- N2-stripping (1)
- NAP-XPS (1)
- NH3-TPD (1)
- NMR (1)
- Nano Particles (1)
- Nano-MgF2 (1)
- Nanopartikel (1)
- Oberflächenanalytik (1)
- Optical layer stacks (1)
- Organic-inorganic hybrid composites (1)
- Oxygen mobility (1)
- Phosphine-ligands (1)
- Photoelektronenspektroskopie (1)
- Polyelectrolytes (1)
- Progressive catalyst poisoning (1)
- Propan oxidation (1)
- Qudrupolar nuclei (1)
- REDOR (1)
- Rhodonia placenta (1)
- Room-temperature (1)
- SEM wood characterization (1)
- Small-angle scattering (1)
- Sol-Gel-Synthese (1)
- Sol-gel synthesis (1)
- Sol-gel-method (1)
- Solid acids (1)
- Solid solutions (1)
- Spektroskopische Charakterisierung (1)
- Spin coating (1)
- Spin-coating (1)
- SrF2 (1)
- Strontium (1)
- Surface analysis (1)
- Surface modification (1)
- Suspensions (1)
- Synchrotron radiation (1)
- TOF (1)
- Terbium (1)
- Thermal decomposition (1)
- TiO2 (1)
- Titanium oxide (1)
- Trigonal-bipyramidal pentachloroferrate(II) (1)
- Ultra high-field MAS NMR (21.1T) (1)
- Vanadium-doped metal oxides (1)
- Vapor-phase hydrofluorination (1)
- Vinyl fluoride (1)
- Water stability (1)
- White-rot fungi (1)
- Wood Protection (1)
- X-ray photoelectron spectroscopy (1)
- Xylose (1)
Organisationseinheit der BAM
- 6 Materialchemie (10)
- 6.3 Strukturanalytik (9)
- 4 Material und Umwelt (4)
- 4.1 Biologische Materialschädigung und Referenzorganismen (4)
- 8 Zerstörungsfreie Prüfung (2)
- 8.1 Sensorik, mess- und prüftechnische Verfahren (2)
- 1 Analytische Chemie; Referenzmaterialien (1)
- 1.9 Chemische und optische Sensorik (1)
- 4.3 Schadstofftransfer und Umwelttechnologien (1)
- 5 Werkstofftechnik (1)
Detection of suspended nanoparticles with near-ambient pressure x-ray photoelectron spectroscopy
(2017)
Two systems of suspended nanoparticles have been studied with near-ambient pressure x-ray photoelectron spectroscopy: silver nanoparticles in water and strontium fluoride—calcium fluoride core-shell nanoparticles in ethylene glycol. The corresponding dry samples were measured under ultra high vacuum for comparison. The results obtained under near-ambient pressure were overall comparable to those obtained under ultra high vacuum, although measuring silver nanoparticles in water requires a high pass energy and a long acquisition time. A shift towards higher binding energies was found for the silver nanoparticles in aqueous Suspension compared to the corresponding dry sample, which can be assigned to a change of surface potential at the water-nanoparticle interface. The shell-thickness of the core-shell nanoparticles was estimated based on simulated spectra from the National Institute of Standards and Technology database for simulation of electron spectra for surface analysis. With the instrumental set-up presented in this paper, nanoparticle suspensions in a suitable Container can be directly inserted into the analysis chamber and measured without prior sample preparation.
New fluorinated coordination polymers were prepared mechanochemically by milling the alkaline earth metal hydroxides MII(OH)2·xH2O (MII: Ca, Sr) with tetrafluoroisophthalic acid (H2mBDC-F4). The structures of [{Ca(mBDC-F4)(H2O)2}·H2O] and [{Sr(mBDC-F4)(H2O)2}·H2O] were determined based on ab initio calculations and their powder X-ray diffraction (PXRD) data. The compounds are isomorphous and crystallize in the orthorhombic space group P212121. The determined structures were validated by using extended X-ray absorption (EXAFS) data. The new materials were thoroughly characterized using elemental analysis, thermal analysis, magic angle spinning NMR, and attenuated total reflection-infrared spectroscopy. Further characterization methods such as BET, dynamic vapor sorption, and scanning electron microscopy imaging were also used. Our investigations indicate that mechanochemistry is an efficient method for preparing such materials.
Catalytic C–F bond activation reactions of mono- and polyfluoroalkanes at Lewis acidic amorphous aluminum chlorofluoride (ACF) are presented. The hydrogen sources Et3GeH or Et3SiH control the selectivity of the conversions. The immobilization of Et3GeH at ACF resulted in catalytic dehydrohalogenation reactions to yield olefins under very mild conditions. In contrast, if Et3SiH is immobilized at ACF, C–C coupling occured and the formation of Friedel–Crafts products was observed. MAS NMR spectroscopic studies revealed information about the surface binding of the substrates.
Thin films of MgF2 have been deposited on silicon wafers in optical quality with a novel sol-gel deposition process at temperatures as low as 100 °C. The properties of the fluoride layers are compared to bulk MgF2 with respect to the optical constants. By employing spectroscopic mapping ellipsometry, the uniformity of the thickness of fluoride layers is confirmed to be within acceptable limits for optical applications. The optical constants are close to the bulk data. High-quality low-index films of suitable and homogeneous thickness have already been produced on a laboratory scale.
Dielectric, anti-reflective or high reflective systems consist of low and high refractive index layers. Common systems are oxides. The preparation of low refractive index MgF2-films of optical quality by means of an anhydrous low temperature solgel synthesis is presented. The MgF2-sol is prepared by spin-coating on silicon and glass substrates. Various film thicknesses between 20 nm and 435 nm have been deposited. It has been shown that the thickness increase is proportional to the number of coating steps. The deposited MgF2-films consist of 10 nm to 20 nm large nanoparticles and have smooth surfaces with an average roughness (Ra) of (1.7 ± 0.3) nm. The optical constants n and k of the films are in agreement with the literature data of bulk-MgF2.
MgF2 and TiO2 single layers and layer stacks were produced by a spin-coating sol-gel process. The final temperature treatment was carried out at 100 °C. The layers were deposited onto silicon and fused silica substrates and were analysed by means of atomic force microscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, ellipsometry, and UV-vis transmission spectroscopy. MgF2 and TiO2 single layers have morphological and optical properties comparable with physical vapour deposited layers. By using spectroscopic mapping ellipsometry, a good inter- and intra-sample homogeneity was confirmed. Multiple deposition steps result in a linear increase of layer thickness. Various films were deposited with thicknesses between 25 nm and 350 nm.
It was shown that the low temperature sol-gel process results in films of optical quality. Anti-reflective and high reflective layer stacks consisting of MgF2 and TiO2 were designed and can be produced now by a sol-gel process, whereas the MgF2 layers in the layer stacks contains also traces of MgF2-2xOx.
Fluorides are well-known as wood preservatives. One of the limitations of fluoride-based wood preservatives is their high leachability. Alternative to current fluoride salts such as NaF used in wood protection are low water-soluble fluorides. However, impregnation of low water-soluble fluorides into wood poses a challenge. To address this challenge, low water-soluble fluorides like calcium fluoride (CaF2) and magnesium fluoride (MgF2) were synthesized as nanoparticles via the fluorolytic sol−gel synthesis and then impregnated into wood specimens. In this study, the toxicity of nano metal fluorides was assessed by termite mortality, mass loss and visual analysis of treated specimens after eight weeks of exposure to termites, Coptotermes formosanus. Nano metal fluorides with sol concentrations of 0.5 M and higher were found to be effective against termites resulting in 100% termite mortality and significantly inhibited termite feeding. Among the formulations tested, the least damage was found for specimens treated with combinations of CaF2 and MgF2 with an average mass loss less than 1% and visual rating of “1”. These results demonstrate the efficacy of low water-soluble nano metal fluorides to protect wood from termite attack.
Lanthanides doped coordination polymers (CPs) with different binding motifs were synthesized to investigate the influence of the different fluorine positions in the structure on the decay time τ of the excited states. Fluorine can be integrated into the network mechanochemically via a fluorinated organic linker, here barium tetrafluoroterephthalate Ba(p-BDC-F4)2 or directly via a metal-fluorine bond (barium terephthalate fluoride BaF(p-BDC)0.5). The CP with a metal-fluorine bond shows the highest lifetime of the excited states of lanthanides (Eu3+, Tb3+ or Eu3+& Tb3+). The excitation of the lanthanides can be performed directly via the excitation wavelength typical for lanthanides and via the excitation wavelength of the linker. This enabled the simultaneous excitation of Eu3+ and Tb3+ in one CP. In the emission spectra (λem = 393 nm) of the mixed doped CPs (Eu3+ and Tb3+) the bands of both lanthanides can be observed. The integration into the crystal lattice and the homogeneous distribution of the lanthanides in the CPs is shown by X-ray diffraction, TEM, STEM-EDS measurements and the long decay times.
As the most electronegative element, fluorine has a strong influence on material properties such as absorption behaviour or chemical and thermal stability. Fluorine can be easily integrated into coordination polymers (CPs) via a fluorinated acetate, here trifluoroacetate in Ba(CF3COO)2, or directly via a metal fluorine bond (BaF(CH3COO)). In the present study both possibilities of fluorine integration were tested and their effect on structure and properties of barium coordination polymers was investigated in comparison with the non-fluorinated barium acetate (Ba(CH3COO)2). In addition to the study of their thermal behaviour and their decomposition temperature, the CPs structures were tested for their application as possible anode materials in lithium ion batteries and for their sorption of water and ammonia. The properties of the CPs can be traced back to the individual structural motifs and could thus trigger new design ideas for CPs in LIBs and/or catalysis.
Improved Durability of Wood Treated with Nano Metal Fluorides against Brown-Rot and White-Rot Fungi
(2022)
Low-water soluble metal fluorides such as magnesium fluoride (MgF2) and calcium Fluoride (CaF2) were evaluated for decay protection of wood. Initially, the biocidal efficacy of nano metal fluorides (NMFs) against wood destroying fungi was assessed with an in-vitro agar test. The results from the test showed that agar medium containing MgF2 and CaF2 was more efficient in preventing fungal decay than stand-alone MgF2 or CaF2. These metal fluorides, in their nanoscopic form synthesized using fluorolytic sol-gel synthesis, were introduced into the sapwood of Scots pine and beech wood and then subjected to accelerated ageing by leaching (EN 84). MAS 19F NMR and X-ray micro CT images showed that metal fluorides were present in treated wood, unleached and leached. Decay resistance of Scots pine and beech wood treated with NMFs was tested against Wood destroying fungi Rhodonia placenta and Trametes versicolor in accordance with EN 113. Results revealed that mass losses were reduced to below 3% in wood treated with the combination of MgF2 and CaF2.
It is concluded that NMFs provide full protection to wood even after it has been leached and can be used as wood preservatives in outdoor environments.
Rare-earth based luminescent materials are key functional components for the rational design of light-conversion smart devices. Stable Eu3+-doped strontium fluoride (SrF2) nanoparticles were prepared at room temperature in ethylene glycol. Their luminescence depends on the Eu content and changes after heat treatment. The crystallinity of heat-treated material increases in comparison with as-synthesized samples. Particles were investigated in solution using X-ray diffraction, small-angle X-ray scattering, and X-ray spectroscopy. After heat treatment, the size of the disordered nanoparticles increases together with a change of their local structure. Interstitial fluoride ions can be localized near Eu3+ ions. Therefore, non-radiative relaxation from other mechanisms is decreased. Knowledge about the cation distribution is key information for understanding the luminescence properties of any material.
The fluorolytic sol–gel synthesis is applied with the intention to obtain two different types of core–shell nanoparticles, namely, SrF2–CaF2 and CaF2–SrF2. In two separate fluorination steps for core and shell formation, the corresponding metal lactates are reacted with anhydrous HF in ethylene glycol. Scanning transmission electron microscopy (STEM) and dynamic light scattering (DLS) confirm the formation of particles with mean dimensions between 6.4 and 11.5 nm. The overall chemical composition of the particles during the different reaction steps is monitored by quantitative Al Kα excitation X-ray photoelectron spectroscopy (XPS). Here, the formation of stoichiometric metal fluorides (MF2) is confirmed, both for the core and the final core–shell particles. Furthermore, an in-depth analysis by synchrotron radiation XPS (SR-XPS) with tunable excitation energy is performed to confirm the core–Shell character of the nanoparticles. Additionally, Ca2p/Sr3d XPS intensity ratio in-Depth profiles are simulated using the software Simulation of Electron Spectra for Surface Analysis (SESSA). In principle, core–shell like particle morphologies are formed but without a sharp interface between calcium and strontium containing phases.
Surprisingly, the in-depth chemical distribution of the two types of nanoparticles is equal within the error of the experiment. Both comprise a SrF2-rich core domain and CaF2-rich shell domain with an intermixing zone between them. Consequently, the internal morphology of the final nanoparticles seems to be independent from the synthesis chronology.