Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (48)
Sprache
- Englisch (46)
- Deutsch (1)
- Mehrsprachig (1)
Referierte Publikation
- ja (48) (entfernen)
Schlagworte
- Mechanochemistry (5)
- XRD (5)
- Nanoparticles (4)
- Catalysis (3)
- Alkaline earth metal coordination polymers (2)
- Coordination polymers (2)
- Doped systems (2)
- Heterogeneous catalysis (2)
- Lewis acid (2)
- Metal fluoride (2)
Organisationseinheit der BAM
Highly dispersed vanadium-doped metal oxides such as VOx/ZrO2, VOx/SiO2 and VOx/TiO2/SiO2 with vanadium contents between 0 and 25 mole% were prepared by special bulk preparation methods (coprecipitation and solgel, followed by freeze-drying). Bulk and surface properties of the obtained mixed oxide solid solutions were thoroughly investigated by different analytical methods (Raman and FTIR spectroscopy, TPD, H2-TPR, oxygen isotope measurements etc.). Moreover, the catalytic behaviour of the oxides was studied for the example of the oxidative dehydrogenation (ODH) of propane to propylene. Independent of the preparation method, the catalytic behaviour of vanadium-doped ZrO2 and TiO2 phases is very similar. Both metal oxide solid solutions are very active in propane ODH whereas the catalytic activity of VOx/SiO2 is relatively low. On the other hand, the reduction of the catalytic activity is accompanied by an improved selectivity for the formation of propylene. The correlation between the catalytic activity and the acidity of the oxide systems is discussed. Oxidation experiments with 18O2 clearly show that the ODH reaction occurs according to the Marsvan Krevelen mechanism.
The dismutation of CHClF2 to CHF3 and CHCl3 was used to probe the effect of γ-Al2O3 fluorination on fluorine-against-chlorine (Cl/F) exchange reactions. X-ray photoelectron spectroscopy (XPS), X-ray excited Auger electron spectroscopy (XAES) and X-ray absorption near edge structure (XANES) spectroscopy were employed to probe the modifications at the surface of γ-Al2O3 accompanying the initial stages of fluorination. The results suggest that fluorine uptake by γ-Al2O3 starts initially at the surface of the oxide particles, with the formation of a fluorine species that is characterised by a single bond and a high effective charge q. Catalytic Cl/F-exchange is only observed after accumulation of higher fluorine concentrations, for which insertion of fluorine into the sub-surface region of the oxide crystallites has commenced. Quantitative XPS shows that the fluorination level must exceed approximately 10 atom% of the anions to achieve catalytic activity. The spectroscopic evidence suggests that the formation of aluminium oxofluorides is sufficient to provide catalytic activity. The presence of an AlF3 phase is not a condition for the observation of catalytic activity, even though defect-rich AlF3 is ultimately the endpoint of the fluorination process and is itself a Cl/F exchange catalyst.
The formation of magnesium fluoride sols and xerogels according to the fluorolytic sol–gel synthesis based on the reaction of Mg(OMe)2 with non-aqueous HF has been thoroughly investigated by X-ray scattering (WAXS/XRD), TEM, SAXS, DLS and 19F MAS NMR spectroscopy. Mechanistic insights were gained by following the reaction progress and formation of intermediate phases of the fluorination of magnesium alkoxides. For F:Mg ratios of 0.3 and 0.4 the formation of two crystalline phases was observed containing the recently obtained compound [Mg6F2(OCH3)10(CH3OH)14] hexanuclear dicubane units. The stoichiometric reaction yields magnesium fluoride nanoparticles with crystallite sizes below 5 nm, which show broad reflections in the X-ray diffraction pattern. Metal fluoride sols prepared by this way undergo tremendous changes over the first several weeks after synthesis. Immediately after the fluorination, particles of about 120 nm—probably agglomerates—are formed, which break apart in the course of about one month of ageing and low-viscous, transparent sols with particles of about 12 nm are obtained. At the same time structural re-organisation processes within the magnesium fluoride particles are observed by an increase of the (110) reflection in WAXS.
Time-optimized 15N quantitative NMR (qNMR) is described for the precise determination of Lewis and Brønsted site concentrations per gram catalyst, enabling a measurement time reduction of more than a factor of 10. The proof-of-principle is demonstrated for amorphous aluminum hydroxide fluorides with their tunable Lewis to Brønsted functionalities and relevance to highly active and selective heterogeneous catalysis using pyridine as a widely accepted probe molecule for Lewis and Brønsted sites. Two different Lewis centers were found, and reliable site concentrations down to the micromole per gram region can be determined. Furthermore, 1H{15N} REDOR NMR for the acid proton at the Brønsted site yields a distance of the 15N atom of bonded pyridine to this acid proton of (0.112 ± 0.002) nm, such that fast motion/diffusion of the Brønsted site-bonded pyridine at the surface can be excluded.
This study reports three new crystalline aluminum isopropoxide oxide fluorides with molar ratios of Al:F equal to 1:1 and 1:1.25. These are the first three representatives isolated without the incorporation of external donor molecules. Compound 1 Al4F4(µ4-O)(µ-O'Pr)5[H(O'Pr)2] contains a tetranuclear unit consisting of two different five fold coordinated AlFO4-units, with F exclusively in the terminal position. Compound 2, Al4F4(µ4-O)(µ-O'Pr)5[H(O'Pr)2]·Al5F5(µ5-O)(µ-O'Pr)8, contains both a tetranuclear unit (as in 1) and a pentanuclear Al-unit. Al-atoms in the latter are five- and six fold coordinated. Compound 3, Al16F20(µ4-O)4(µ-O'Pr)20·2('PrOH), exhibits a slightly higher fluorination degree and contains an oligomeric chain of four F-linked tetranuclear Al-units. In addition to X-ray structure analysis, compound 1 was characterized by different solid state MAS NMR techniques, including 27Al triple quantum MAS NMR and 1H, 1H→13C CP, 19F and 27Al MAS NMR. On the basis of the collected data, a reliable decomposition of 27Al single pulse MAS NMR spectra and an unambiguous assignment of the resonances to the respective structural AlFO4-units are given. The new crystalline aluminum isopropoxide oxide fluorides are direct evidence of the fluorolytic sol–gel mechanism previously discussed.
Dielectric, anti-reflective or high reflective systems consist of low and high refractive index layers. Common systems are oxides. The preparation of low refractive index MgF2-films of optical quality by means of an anhydrous low temperature solgel synthesis is presented. The MgF2-sol is prepared by spin-coating on silicon and glass substrates. Various film thicknesses between 20 nm and 435 nm have been deposited. It has been shown that the thickness increase is proportional to the number of coating steps. The deposited MgF2-films consist of 10 nm to 20 nm large nanoparticles and have smooth surfaces with an average roughness (Ra) of (1.7 ± 0.3) nm. The optical constants n and k of the films are in agreement with the literature data of bulk-MgF2.
A series of crystalline aluminum hydroxy fluorides in cubic pyrochlore structure AlFx(OH)3-x·H2O with variable F-content x were investigated by solid-state NMR by applying different magnetic fields up to 21.1 T. Distinguishable octahedral species AlFx(OH)6-x (x = 1-6) were identified in the crystalline aluminum hydroxy fluorides. The subsequent analysis of the highfield 27Al MAS NMR data allows the derivation of the trend analysis graphs giving correlations between the 27Al chemical shifts and the quadrupolar frequencies and the F-content x in AlFx(OH)6-x. Clear trends were obtained for both, which are, along with the 19F MAS chemical-shift trend analysis presented earlier, valuable tools for the interpretation of MAS NMR spectra of amorphous AlFx(OX)3-x compounds (X = H, alkyl). Following the dehydration of the pyrochlores by solid-state NMR eventually reveals a remarkable influence of the incorporated solvent molecules (H2O) on the 19F chemical shift. On that basis, a new chemical-shift trend analysis for 19F chemical shifts in correlation with x in AlFx(OH)6-x units for proton-poor substances (in the Al, F, O, H system) was determined. By using this correlation, high-surface AlF3 has a mean bulk Al:F ratio similar to that found for ACF, namely, AlF2.8(O/OH)0.2.
Thin films of MgF2 have been deposited on silicon wafers in optical quality with a novel sol-gel deposition process at temperatures as low as 100 °C. The properties of the fluoride layers are compared to bulk MgF2 with respect to the optical constants. By employing spectroscopic mapping ellipsometry, the uniformity of the thickness of fluoride layers is confirmed to be within acceptable limits for optical applications. The optical constants are close to the bulk data. High-quality low-index films of suitable and homogeneous thickness have already been produced on a laboratory scale.
Static TOF-SIMS results strongly underpin earlier conclusions from ESCA, XANES, and tracer studies that the accumulation of fluorine and chlorine at the surface of chromia by a heterogeneous reaction with a chlorofluorocarbon compound results in the formation of mixed chromium oxide halide species and not in the nucleation of CrCl3 and/or CrF3 phases.
A successful mechanochemical synthesis of strontium terephthalate trihydrate is described for the first time. The dehydration of Sr(C8H4O4)·3H2O occurs at about 100 °C and results in a well-defined strontium terephtalate, Sr(C8H4O4), thermally stable up to 550 °C. Both compounds are not described so far in the literature. Their structures were solved by ab initio structure determination and subsequent Rietveld refinement of the powder diffraction data. Further methods like DTA-TG, MAS NMR and FT-IR spectroscopy, and BET measurements were used to characterize these compounds.