Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (79) (entfernen)
Sprache
- Englisch (71)
- Deutsch (7)
- Mehrsprachig (1)
Schlagworte
- Structural health monitoring (7)
- Nano aerial robot (6)
- Gas source localization (5)
- Gas storage areas (5)
- Membrane-based gas sensing (5)
- RFID sensors (5)
- Subsurface monitoring (5)
- Drop test (4)
- Gas sensors (4)
- Monitoring (4)
- Swarm (4)
- Air quality monitoring (3)
- Autonomous micro UAV (3)
- Electronic nose (3)
- Hazardous scenarios (3)
- LoRaWAN (3)
- Mobile Robot Olfaction (3)
- Multisensor system (3)
- SHM (3)
- Smart structures (3)
- VOC (3)
- Wireless sensors (3)
- Air quality (2)
- Biologically inspired robots (2)
- Chemical sensing (2)
- Concrete (2)
- Condition monitoring (2)
- Dangerous goods (2)
- Data-fusion (2)
- Distributed linear sensor (2)
- Early-damage-detection (2)
- Embedded sensor (2)
- Embedded sensors (2)
- Embedded systems (2)
- Energy harvesting (2)
- Environment (2)
- Fiber optical sensing (2)
- Funksensorik (2)
- Gas sensing (2)
- Indoor air quality (2)
- Inertial measurement unit (2)
- Inertial navigation system (2)
- Lamb-waves (2)
- Localization (2)
- Long term monitoring (2)
- Magnetic field (2)
- Mikrodrohne (2)
- Mobile robot olfaction (2)
- Mobile sensing system (2)
- Multi-sensor system (2)
- Non-destructive evaluation (2)
- Passive RFID (2)
- Person tracking (2)
- Quadrocopter (2)
- RFID (2)
- Reactive plume tracking (2)
- Safety management (2)
- Sensor calibration and validation (2)
- Sensornetzwerk (2)
- Sensors (2)
- Sensors in concrete (2)
- Smart sensors (2)
- Spectroscopy (2)
- Strukturüberwachung (2)
- Trail detection (2)
- Trail following (2)
- Transmission characteristics (2)
- Ultrasound (2)
- Wireless sensor network (WSN) (2)
- Accelerometer (1)
- Actuators (1)
- Aerial robot olfaction (1)
- Ammonia gas sensor (1)
- Analysis (1)
- Anemotaxis (1)
- Artificial potential field (1)
- Autonomous UAV (1)
- Bauteilmonitoring (1)
- Berlin Main Station (1)
- Bio-inspired (1)
- Bridge components (1)
- Calibration of electrical quantities (1)
- Calibration of force (1)
- Calibration of temperature (1)
- Chemical and wind sensing (1)
- Chemometric techniques (1)
- Chemotaxis (1)
- Computed tomography (1)
- Cone Calorimeter (1)
- DDS (1)
- Data fusion (1)
- Dehnungsmessstreifen (1)
- Differential displacements (1)
- Digital Certificates (1)
- Digitalisation (1)
- Distributed multifunctional sensor (1)
- Distributed sensor (1)
- Drop (1)
- DuraBASt (1)
- Early damage detection (1)
- Eindringmodul (1)
- Electronic transport documents (1)
- Embedded (1)
- Embedded system (1)
- Emmbedded sensor (1)
- Environmental analysis (1)
- Faser-Bragg Gitter (1)
- Fiber Bragg grating (1)
- Fiber Bragg gratings (1)
- Fiber bragg grating (1)
- Fibre optical sensing (1)
- Field conditions (1)
- Finite element methods (1)
- Fire retardancy (1)
- Fluorescence (1)
- Fluorescent sensor (1)
- Fluoreszenzlöschung (1)
- GC-MS (1)
- Gas detection (1)
- Gas detector (1)
- Gas dispersion simulation (1)
- Gas distribution mapping and gas source localization (1)
- Gas distribution modeling (1)
- Gas distribution modelling (1)
- Gas storage sites (1)
- Gasfreisetzung (1)
- Gefährdungsbeurteilung (1)
- Guided wave (1)
- High impact shock application (1)
- Hochdynamische Untersuchungen (1)
- Hopkinson bar (1)
- Hopkinson pressure bar (1)
- Hopkinson-Stab (1)
- Humidity sensors (1)
- Hydraulic levelling system (1)
- Hydrogen technology (1)
- Härtevergleichsplatten (1)
- Impact (1)
- Indoor Localization (1)
- Instrumentierte Eindringprüfung (1)
- Intumescence (1)
- Klebstoffe (1)
- Kraftabhängige Funktion (1)
- Lamb wave (1)
- Large scale soil test field (1)
- Laser-based displacement measuring system (1)
- Leak detection (1)
- Linear sensor (1)
- Localization of gas sources (1)
- Magneto-optischer Sensor (1)
- Magnetostriction (1)
- Magnetostrictive metal coating (1)
- Magnetostriktive Beschichtung (1)
- Maschinennachgiebigkeit (1)
- Measurement (1)
- Measurement uncertainty (1)
- Membrane-based linear gas sensor (1)
- Metal oxide semiconductor (1)
- Methane measuring (1)
- Micro UAV (1)
- Miniaturized sensor device (1)
- Mobile Robot (1)
- Modeling and simulation (1)
- Moisture (1)
- Moisture measurements (1)
- Monitoring of CO2 (1)
- Multi sensor device (1)
- Multi-Hop WSN (1)
- Multi-sensor device (1)
- Multichannel measuring (1)
- Multihop (1)
- NDT Inspection (1)
- Nano UAV Swarm (1)
- Nanocomposites (1)
- New sensor principles (1)
- Nitroaromaten (1)
- Odor localization (1)
- Oil (1)
- Olfaction (1)
- Particle filter (1)
- Passive sensor interface (1)
- Passive sensors (1)
- Pattern recognition methods (1)
- Piezoresistive accelerometer (1)
- Plume tracking (1)
- Prototyp (1)
- Pump control (1)
- Quadrokopter (1)
- Quality Infrastructure (1)
- Quantification of gas concentrations (1)
- RAM packages (1)
- RFID Sensor systems (1)
- RFID based sensors (1)
- RFID-based sensors (1)
- Radioactive (1)
- Red Phosphorus (1)
- Remote gas sensor model (1)
- Robotik (1)
- Schadensfrüherkennung (1)
- Selbstkalibrierung (1)
- Selective permeability (1)
- Self-diagnostic fiber optical sensor (1)
- Sensor (1)
- Sensor planning (1)
- Setup and Validation (1)
- Single cable system (1)
- Soil test field (1)
- Spatially distributed monitoring (1)
- Sphärische Indenter (1)
- Standard gas generator (1)
- Strain (1)
- Strain measurements (1)
- Structural Health Monitoring (1)
- Structure health monitoring (1)
- Suche und Lokalisierung von gasförmigen Gefahrstoffquellen (1)
- System adhesive/ strain gauge (1)
- TDLAS (1)
- Temperaturabhängige Prüfung (1)
- Temperature and Frequency Compensation (1)
- Temperature behavior (1)
- Temperature calibration (1)
- Temperature characteristics (1)
- Temperature dependent and high dynamic load tests (1)
- Temperaturkompensation (1)
- Test (1)
- Tomographic reconstruction of gas plumes (1)
- Tunable Diode Laser Absorption Spectroscopy (TDLAS); UAV-REGAS (1)
- UHF antenna (1)
- Urban air monitoring (1)
- Vereinfachtes Verfahren (1)
- WLAN (1)
- Water quality (1)
- WiFi (1)
- Wireless mobile sensor device (1)
- agricultural economy (1)
- embedded sensor (1)
- environment (1)
- fluorescence (1)
- gas analysis (1)
- poultry odorous air monitoring (1)
- spectroscopy (1)
Organisationseinheit der BAM
- 8 Zerstörungsfreie Prüfung (27)
- 8.1 Sensorik, mess- und prüftechnische Verfahren (27)
- 1 Analytische Chemie; Referenzmaterialien (4)
- 1.9 Chemische und optische Sensorik (4)
- 8.2 Zerstörungsfreie Prüfmethoden für das Bauwesen (3)
- 3 Gefahrgutumschließungen; Energiespeicher (1)
- 3.3 Sicherheit von Transportbehältern (1)
- 6 Materialchemie (1)
- 6.7 Materialsynthese und Design (1)
- 8.0 Abteilungsleitung und andere (1)
BAM is the German Federal Institute for Materials Research and Testing and the competent authority for mechanical and thermal safety assessment of transport packages for spent fuel and high level waste. In context with safety assessment of RAM packages BAM performed numerous drop tests in the last decades. The tests were mostly accompanied by extensive and various measurement techniques especially by instrumented measurements with strain gages and accelerometers. The procedure of drop testing and the resulting measurement analysis are the main methods to evaluate the safety against mechanical test conditions. Measurement techniques are dedicated to answer questions in regard to the structural integrity of a RAM package, the mechanical behavior of the prototype as well as of its content under impact conditions.
Test results like deceleration-time functions constitute a main basis for the validation of assumptions in the safety analysis and for the evaluation of numerical calculations. In this context the adequate selection of accelerometers and measurement systems for the performance of drop tests is important. Therefore it is not only necessary to find suitable positions for the accelerometers at the test specimens, but also to consider technical boundary conditions as e.g. temperature.
Insect behavior is a common source of inspiration for roboticists and computer scientists when designing gas-sensitive mobile robots. More specifically, tracking airborne odor plumes and localization of distant gas sources are abilities that suit practical applications such as leak localization and emission monitoring. Gas sensing with mobile robots has been mostly addressed with ground-based platforms and under simplified conditions and thus, there exist a significant gap between the outstanding insect abilities and state of the art robotics systems. As a step towards practical applications, we evaluated the performance of three biologically inspired plume tracking algorithms. The evaluation is carried out not only with computer simulations, but also with real-world experiments in which, a quadrocopter-based micro Unmanned Aerial Vehicle autonomously follows a methane trail towards the emitting source. Compared to ground robots, micro UAVs bring several advantages such as their superior steering capabilities and fewer mobility restrictions in complex terrains. The experimental evaluation shows that, under certain environmental conditions, insect like behavior in gas-sensitive UAVs is feasible in real world environments.
In Glasfasern eingeschriebene Bragg-Gitter (FBG: fibre-based Bragg gratings) sind über die Verschiebung der Bragg-Wellenlänge in der Lage, Stauchungen und Dehnungen von Glasfasern hochgenau zu erfassen. In Kompositwerkstoffe eingebettete faseroptische Sensoren können Bauteile bezüglich ihrer mechanischen Integrität überwachen und früh-zeitig Informationen über Materialveränderungen gewinnen.
Um die Zuverlässigkeit eines solchen Sensors zu gewährleisten, ist es wichtig, die korrekte Funktion des Sensors im Verbund mit der Werkstoff-Matrix on-line und in-situ sicherzu-stellen. Im Rahmen des DFG-Projekts FAMOS² (FAser-basierter Magneto-Optischer SchichtSensor) wurde ein selbstdiagnosefähiger Schichtsensor entwickelt, der mit Hilfe von magnetostriktiven Aktorschichten aus Nickel bzw. Eisen-Nickel validiert werden kann.
Der FAMOS²-Schichtsensor wird durch ein PVD (physical vapour deposition)/ECD (electro-chemical deposition) Hybridschichtsystem realisiert, das auf dem Fasermantel im Bereich des FBG haftfest, homogen und langzeitfunktional abzuscheiden ist. Dabei wird in einem ersten Schritt ein etwa 100 Nanometer dünnes PVD-Schichtsystem aus Chrom und Kupfer als Haftvermittler auf der Glasfaser bzw. als leitfähige Startschicht für den nachfolgenden ECD-Prozess abgeschieden. Um eine rotationssymmetrische Schich-tabscheidung zu gewährleisten, erfolgt während der PVD-Beschichtung eine Rotation der Glasfasern. In einem zweiten Schritt wird dann unter Verwendung eines klassischen Watts-Elektrolyten in einer speziell entwickelten ebenfalls rotationssymmetrisch aufgebau-ten ECD-Durchströmungszelle dann die etwa 30 Mikrometer dicke, magnetostriktive Ak-torschicht auf dem PVD-Schichtsystem abgeschieden, im Vergleich sowohl reine Nickel-Schichten als auch Nickel-Eisen-Schichten.
Ein äußeres Magnetfeld dehnt die magnetostriktive Aktorschicht und damit auch die Faser reversibel. Diese Dehnung führt zu einer Verschiebung der Bragg-Wellenlänge, welche direkt mit der Stärke eines zu messenden oder zu Validierungszwecken vorgegebenen Magnetfeldes korreliert. Die Anpassung der Beschichtungsverfahren an die Fasergeome-trie und die mechanischen Eigenschaften der Hybridschichten werden hinsichtlich der me-chanischen Integrität des faseroptischen Sensors diskutiert und der Nachweis der Selbst-diagnosefähigkeit erbracht.
Es wird ein vereinfachtes Verfahren für die Bestimmung und Implementierung der Maschinennachgiebigkeit bei der Verwendung eines sphärischen Indenters dargestellt. Die Maschinennachgiebigkeit wird bei deutlicher Kraftabhängigkeit als Funktion der Kraft in die Auswertung implementiert. Als sensitiver Kennwert dient der aus der instrumentierten Eindringprüfung an Härtevergleichsplatten ermittelte Eindringmodul.
Temperature characteristics of a piezoresistive accelerometer for high impact shock application
(2018)
This study presents the characterization of a piezoresistive accelerometer damped with silicon oil for the application in drop tests carried out at BAM. Experiments were performed with the Hopkinson Bar method in close correlation to the real-world application conditions. The results point out certain limitations regarding the temperature influence and the frequency response. Additional experiments were performed with a gas damped type of piezoresistive accelerometer, which has superior specifications, particularly for low temperatures. The results allow for a comparison.
BAM is the German Federal Institute for Materials Research and Testing and the competent authority for mechanical and thermal safety assessment of transport packages for spent fuel and high level waste. In context with safety assessment of RAM packages BAM performed numerous drop tests in the last decades. The tests were mostly accompanied by extensive and various measurement techniques especially by instrumented measurements with strain gages and accelerometers.
The procedure of drop testing and the resulting measurement analysis are the main methods to evaluate the safety against mechanical test conditions. Measurement techniques are dedicated to answer questions in regard to the structural integrity of a RAM package, the mechanical behavior of the prototype as well as of its content under impact conditions.
Test results like deceleration-time functions constitute a main basis for the validation of assumptions in the safety analysis and for the evaluation of numerical calculations. In this context the adequate selection of accelerometers and measurement systems for the performance of drop tests is important. Therefore it is not only necessary to find suitable positions for the accelerometers at the test specimens, but also to consider technical boundary conditions as e.g. temperature.
Over decades, the German Federal Institute for Materials Research and Testing (BAM) has established a sophisticated calibration laboratory for force, temperature and electrical quantities. Since more than 15 years it is accredited, currently by the national accreditation body (DAkkS), and offers its service also to external entities on a global scale. As a public provider, we are furthermore committed to research and development activities that demand measurements with highest quality and low level of uncertainties. Two R&D examples are highlighted within this contribution.
In this paper, we introduce a nano aerial robot swarm for Indoor Air Quality (IAQ) monitoring applications such as occupational health and safety of (industrial) workplaces. The robotic swarm is composed of nano Unmanned Aerial Vehicles (UAVs), based on the Crazyflie 2.0 quadrocopter, and small lightweight Metal Oxide (MOX) gas sensors for measuring the Total Volatile Organic Compound (TVOC), which is a measure for IAQ. An indoor localization and positioning system is used to estimate the absolute 3D position of the swarm similar to GPS. A test scenario was built up to validate and optimize the swarm for the intended applications. Besides calibration of the IAQ sensors, we performed experiments to investigate the influence of the rotor downwash on the gas measurements at different altitudes and compared them with stationary measurements. Moreover, we did a first evaluation of the gas distribution mapping performance. Based on this novel IAQ monitoring concept, new algorithms in the field of Mobile Robot Olfaction (MRO) are planned to be developed exploiting the abilities of an aerial robotic swarm.
The present paper describes the development of a sensor material that changes its fluorescence in the presence of gaseous ammonia in a relevant concentration range. The implementation into a semi-automatic gas measurement device enables low-cost, precise, simple and fast monitoring of low con-centrations of harmful gases, like ammonia, and hence can help to improve the climate monitoring in livestock housing, barns or stables.
Design and Implementation of Smart Multisensor Monitoring System for Safe Workplaces with LoRaWAN
(2020)
This project addresses the application of safe workplaces in offices and chemical laboratories where indoor air quality plays an important role. The LoRaWAN (Long Range Wide Area Network) is used as a communication interface to make important sensor data globally accessible. The goal of the development is to create a sensor node and an online and offline solution that collects the data from the sensor nodes and stores it on a local server or in a cloud. In cooperation with the companies WISTA GmbH and IONOS, a test sensor network is going to be established in the Berlin-Adlershof area.