Filtern
Dokumenttyp
- Vortrag (9) (entfernen)
Sprache
- Englisch (9)
Referierte Publikation
- nein (9) (entfernen)
Schlagworte
- Storage (9) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (9)
The Bundesanstalt für Materialforschung und –prüfung (BAM) and Sandia National Laboratories (SNL) entered into a Memorandum of Understanding (MOU) in September 2012 to foster technical collaborations in the areas associated with the backend of the commercial nuclear fuel cycle. Specifically, the focus is on packaging, transportation, and storage of commercial spent nuclear fuel. The institutes meet about twice each year, alternating between institutes. This provides the opportunity for staff members from the host organization more exposure to technical issues that are of concern internationally and to collaborate with technical experts working on similar problems.
Since 2012, the focus of the meetings has been on technical issues associated with extended dry storage and subsequent transportation of commercial spent fuel. Topics range from hydride effects on cladding integrity, spent fuel response during Normal Conditions of Transport (NCT), finite element analyses of fuel and cask response to accident conditions, bolt and seal behavior over extended periods of time, and corrosion associated with bolts, metallic seals, and stainless steel canisters.
This MOU has provided an effective leverage for technical collaboration. For example, SNL is funding (through DOE), Savannah River National Laboratories (SRNL) to look at bolt and seal degradation issues. SRNL has an MOU with BAM to collaborate on bolt and seal degradation during extended storage. Likewise, Sandia and BAM are collaborating with the EC Joint Research Center on an International Nuclear Energy Research Initiative (I-NERI) to investigate spent fuel behavior when subjected to mechanical loadings. This important work will provide insight into failure mechanisms, as well as spent fuel release fractions, given a breach of the cladding wall.
This presentation provides an overview of high ranked technical issues associated with extended storage and subsequent transportation, as well as the work underway at BAM and SNL that are addressing these issues.
This paper describes and discusses the major challenges of spent fuel management in Germany after the phase-out of nuclear electricity generation was decided in 2011 and a new repository siting procedure was implemented in 2013. Consequences from those decisions which were legally founded by amendments of the German Atomic Energy Act (AtG) result in the need to transfer all remaining spent fuel from limited reactor operation (last reactor shutdown until the end of 2022) into casks for subsequent dry interim storage on-site. Storage licenses are generally issued site-specific considering specific dual purpose casks (DPC) and their inventories and they are generally limited to 40 years so far. But the need for extending the interim storage period in the future has become obvious. Even though, this may not be an issue to be solved already today questions about additional safety demonstrations will arise as soon as licenses need to be extended. Certainly, these questions will ask for reliable data about the long term performance and safety of structures, systems, and components, e. g. the long term performance of cask components and materials like bolted closure systems including metal seals, or fuel rod behaviour concerning cladding materials under stress and temperature conditions. In case of dual purpose casks for storage and transportation this includes aspects on how to demonstrate transportability during or after several decades of interim storage. Long term investigations often require plenty of time and therefore need to be initiated timely.
The current German waste management strategy consists of dry interim storage of spent fuel inside dual purpose casks at various sites and its subsequent direct final disposal in a deep geological repository. Interim facilities are licensed for up to 40 years of operation but this storing period will have to be extended until repository site selection and operation is concluded, potentially up to 100 years. In this context, research on long term mechanical behavior of fuel cladding and cask components during extended interim storage and transportation to a final repository are of outmost importance.
Barrier properties of the fuel cladding depend on its integrity which is affected over time by thermo-mechanical loads and by microstructure altering including potential embrittlement caused by re-oriented hydride precipitation. Experimental and numerical investigations have been performed by the international research community in order to predict the degree of cladding embrittlement against storage time. Results have shown that embrittlement of cladding materials is governed by the concentration, orientation and size of precipitated hydrides. Nevertheless, the existing variety of fuel materials and assemblies available on the market and the many parameters effecting hydride precipitation do not allow sufficient reliable safety predictions in the long term without further investigation.
Thus, knowledge on cladding integrity over storage time and during subsequent transportation is to be gained taking into consideration the relevant fuel and cladding material types as well as cladding temperatures along with peak values during cask drying and cooling rates during storage periods. Expected research results will increase the accuracy of cladding safety analysis. This paper summarizes the current German status regarding extended interim storage and how BAM is going to identify and address potential cladding integrity issues in the long term.
The safe and secure long term storage of spent nuclear fuel until its final disposal in a deep geological repository is a corner stone of the German nuclear waste management strategy. So far interim storage licenses are limited to 40 years concerning the initial concept of having a repository available until 2035. But in the meantime the exploration of the designated Gorleben salt dome was finally stopped and a reset of the complete site selection process was concluded by the German Federal parliament and subsequently fixed by law. A 33-member “Commission on the storage of highly radioactive materials” was established in 2014, to elaborate a consent based siting process and to develop criteria for the safe disposal of heat generating waste. The disposal commission agreed and published its final report in 2016.
As a major consequence, the necessary timeframe for establishing the final repository is going to be exceeded significantly and with that, an extension of the current dry interim storage in dual purpose casks becomes necessary. This paper explains the major actions to be taken in Germany to address all relevant issues for a future extension of storage licenses beyond the initial timeframe of 40 years.
Perspectives on extending interim storage of spent nuclear fuel (beyond the initial license period)
(2017)
The presentation adddresses the consequences and challenges of the German nuclear phase-out in conjunction with the restart of siting process for a high-level radioactive waste repository. Concerning spent fuel this will lead to extended interim storage periods for the dry storage casks beyond the initial licensing period of 40 years.
For extending storage periods additional safety assessments and data about the long term performance of materials, components and casks will be needed and BAM has already been lauching specific R&D projects addressing identified data gaps.
Packages for the transport and storage of radioactive materials are often sealed with elastomer or metal seals. These seals are basic components to meet the leak tightness criteria for these kind of packages. An overview over ongoing research and development concerning metal and elastomer seals is given in the presentation. Introductions in the fundamental functionality of elastomer and metal seals are presented. Ageing processes are shown for both components regarding to different ageing effects.
The characterization of spent fuel and radioactive waste is essential in the evaluation of the ability of these materials to meet acceptance criteria. Prior to determining a method for spent fuel characterization, it is necessary to identify the type of data required to support safety and other analyses for the storage, transportation and final disposal of spent fuel. BAM’s understanding and capabilities in the field of spent fuel characterization are presented for the scope of a coordinated research project on the topic.
This contribution provides current findings regarding materials susceptibility for carbon capture, utilization and storage (CCUS) applications. Basing on results gathered in 2 German long-term projects (COORAL and CLUSTER) suitable materials are introduced as well as dominating impurities of the CO2-stream and corrosion mechanisms. Investigations cover the whole CCUS process chain and provide material recommendations for certain parts.
A Memorandum of Understanding (MOU) between Argonne National Laboratory (Argonne) and the German Bundesanstalt für Materialforschung und -prüfung (BAM) was signed in October 2014. Its objectives are to promote cooperation among scientists and specialists at Argonne and BAM and establish a framework for collaboration in advanced technologies associated with the back end of the nuclear fuel cycle. Collaborative activities involving Argonne and BAM may be implemented through the promotion of joint research activities and scientific workshops and conferences; exchange of technical information; and visits by scientists, specialists, and graduate, postgraduate, and Ph.D. students. The MOU was renewed in January 2020 for another five years. Highlights of the progress and achievements are provided in identified topical areas for collaboration on ageing management guidance, storage, transportation and disposal R&D, joint conference activities, and conclude with the benefits of the MOU in fostering Argonne and BAM collaboration.