Solidification cracking in laser GMA hybrid welding of thick-walled parts
- Laser GMA hybrid welds, producing partial penetration, were conducted on stiff tubes made of S460NH. Experiments, using a design-of-experiments plan were conducted to examine the influence of the welding parameters on the occurrence of solidification cracks. Results say that cracks diminish, when high levels of arc power are applied, while their number increases with rising laser beam power. The weld velocity had no measurable impact.
Autor*innen: | M.O. Gebhardt, Andrey GumenyukORCiD, Michael RethmeierORCiD |
---|---|
Dokumenttyp: | Zeitschriftenartikel |
Veröffentlichungsform: | Verlagsliteratur |
Sprache: | Englisch |
Titel des übergeordneten Werkes (Englisch): | Science and technology of welding and joining |
Jahr der Erstveröffentlichung: | 2014 |
Herausgeber (Institution): | Institute of Materials, Minerals and Mining |
Verlag: | Maney |
Verlagsort: | London |
Jahrgang/Band: | 19 |
Ausgabe/Heft: | 3 |
Erste Seite: | 209 |
Letzte Seite: | 213 |
Freie Schlagwörter: | Design of experiments; Laser hybrid welding; Partial penetration welding; Solidification cracking; Thick walled parts; Tube welding |
DOI: | 10.1179/1362171813Y.0000000171 |
ISSN: | 1362-1718 |
ISSN: | 1743-2936 |
Verfügbarkeit des Dokuments: | Datei im Netzwerk der BAM verfügbar ("Closed Access") |
Datum der Freischaltung: | 20.02.2016 |
Referierte Publikation: | Ja |
Datum der Eintragung als referierte Publikation: | 06.03.2014 |