Refine
Document Type
Keywords
- ALD process parameters (2)
- X-ray photoelectron spectroscopy (2)
- ellipsometry (2)
- in-gap states (2)
- plasma enhanced atomic layer deposition (2)
- Atomlagenabscheidung (1)
- In-gap defect states (1)
- Korrosion (1)
- Leakage current (1)
- Linear Scan Voltametry (1)
- Photoelektronenspektroskopie (1)
- Photokathoden (1)
- Plasma enhanced atomic layer deposition (PEALD) (1)
- Silizium (1)
- Ti-N contributions (1)
- TiO2 (1)
- Titanium dioxide (TiO2) (1)
- Titanium oxynitrdie (TiON) (1)
- Titanium oxynitride (1)
- X-ray absorption spectroscopy (1)
- atomic layer deposition (1)
- band-gap narrowing (1)
- capacitance-voltage (1)
- capacitance-voltage (CV) (1)
- current-voltage (1)
- current-voltage (IV) (1)
- electrical characterization (1)
- synchrotron radiation photoelectron spectroscopy (SR-PES) (1)
- titanium oxynitride (1)
- titanium oxide (TiO2) (1)
- titanium oxynitride (1)
- valence band spectra (1)
- x-ray absorption spectroscopy (1)
Institute
Valence band (VB) spectra of titanium dioxide (TiO2) and oxynitride (TiOxNy) films prepared by different atomic layer deposition (ALD) processes are compared and related to electrical characterization [current–voltage (JV) and capacitance–voltage (CV)] results. By increasing the nitrogen amount in the TiO2 film, band-gap narrowing is observed. The band-gap decrease is related to the contribution of the nitrogen density of states, which induces defects within the band-gap and thus reduces its optical band-gap. In-gap states are found in the VB spectra at 1 eV below the Fermi energy in all investigated ALD samples, i.e., in TiO2 as well as in TiOxNy films. An exponential correlation between leakage current density and in-gap state intensity is derived
by the combination of JV measurements and VB spectra, whereas the in-gap states seem to have no influence on hysteresis and fixed oxide charges found in the CV data. It is argued that the in-gap states in TiO2 and TiOxNy have an excitonic or polaronic origin. Both, band-gap narrowing and in-gap state intensity can be tuned by the ALD process selection and the variation of its parameters.
A comparative study of thin titanium oxynitride (TiOxNy) films prepared by plasma enhanced atomic layer deposition using tetrakis(dimethylamino)titanium (TDMAT) and N2 plasma as well as titanium(IV)isopropoxide and NH3 plasma is reported. The comparison is based on the combination of Ti2p core level and valence band spectroscopy and current-voltage measurements. The TDMAT/N2 process delivers generally higher fractions of TiN and TiON within the Ti2p spectra of the films and stronger photoemissions within the bandgap as resolved in detail by high energy resolution synchrotron-based spectroscopy. In particular, it is shown that higher TiN contributions and in-gap emission intensities correlate strongly with increased leakage currents within the films and might be modified by the process parameters and precursor selection.
The process parameters’ impact of the plasma-enhanced atomic layer deposition (PE-ALD) method on the oxygen to nitrogen (O/N) ratio in titanium oxynitride (TiOxNy) films was studied. Titanium(IV)isopropoxide in combination with NH3 plasma and tetrakis(dimethylamino) titanium by applying N2 plasma processes were investigated. Samples were characterized by the in situ spectroscopic ellipsometry, x-ray photoelectron spectroscopy, and electrical characterization (current–voltage: I-V and capacitance–voltage: C-V) methods. The O/N ratio in the TiOxNy
films is found to be very sensitive for their electric properties such as conductivity, dielectric breakdown, and permittivity. Our results indicate that these PE-ALD film properties can be tuned, via the O/N ratio, by the selection of the process parameters and precursor/coreactant
combination.
Titanium oxynitride films are prepared by plasma enhanced atomic layer deposition method using two different precursors and nitrogen sources. Synchrotron radiation-based X-ray photoelectron spectroscopy and X-ray absorption spectroscopy are used to characterize the nitrogen species incorporated
within these films depending on the deposition parameters.
It is found that nitrogen atoms in these films are differently bonded. In particular, it can be distinguished between Ti-ON and Ti-N bonding configurations and molecular nitrogen species caused by precursor fragments.
Titanium oxide (TiO2) deposited by atomic layer deposition (ALD) is used as a protective layer in
photocatalytic water splitting system as well as a dielectric in resistive memory switching. The way
ALD is performed (thermally or plasma-assisted) may change the growth rate as well as the electronic properties of the deposited films. In the present work, the authors verify the influence of the ALD mode on functional parameters, by comparing the growth rate and electronic properties of
TiO2 films deposited by thermal (T-) and plasma-enhanced (PE-) ALD. The authors complete the
study with the electrical characterization of selected samples by means of capacitance–voltage and
current–voltage measurements. In all samples, the authors found a significant presence of Ti3+ states, with the lowest content in the PE-ALD grown TiO2 films. The observation of Ti3+ states
was accompanied by the presence of in-gap states above the valence band maximum. For films thinner than 10 nm, the authors found also a strong leakage current. Also in this case, the PE-ALD films showed the weakest leakage currents, showing a correlation between the presence of Ti3+ states and leakage current density.
Charakterisierung von TiO2-ALD-Schichten und deren Nutzung für die Passivierung von Si-Photokathoden
(2015)
Wir berichten zunächst über den Einfluss der Methode der Atomlagenabscheidung auf die TiO2-Schichteigenschaften. Insbesondere wird der Zusammenhang zwischen Ti3+- sowie Interbandzuständen mit elektrischen Kennlinien und deren Einfluss auf funktionale Schichteigenschaften diskutiert. Anschließend werden Mikrostrukturierung, Grenzflächen-Engineering und konforme Abscheidung einer TiO2-ALD-Schutzschicht effektiv zur Performance-Steigerung von p-Si-Photokathoden angewendet.