Refine
Document Type
Language
- English (4)
Is part of the Bibliography
- no (4)
Keywords
Institute
Begutachtungsstatus
- peer-reviewed (3)
The use of non-conventional materials is nowadays of much interest in scientific community. Magneto-rheological elastomers are hybrid materials, which in presence of magnetic fields state a change in their mechanical properties. They are composed by an elastomeric matrix with embedded magnetic particles. One of the most attractive features of these materials is that as soon as the magnetic field is removed from the material, the original mechanical properties are completely recovered, with negligible differences in comparison to the original state. This paper focuses on the study of magnetic characteristics of these smart materials, such as relative permeability and demagnetizing factors, for samples with different volume concentration of ferromagnetic particles.
Increasing the lifetime of titanium implants through a diffusion-controlled surface treatment
(2023)
The present study investigates the interface between carbon steel and titanium samples annealed at different temperatures (𝜗1 = 800 ◦C and 𝜗2 = 1050 ◦C). In both cases, an observable layer forms at the interface, with its thickness increasing from t𝜗1= 2.75 ± 0.15 μm at 800 ◦C to t𝜗2= 8.86 ± 0.29 μm at 1050 ◦C. The layer’s composition and thickness evolve with temperature. Analysis reveals approximately 40 at.-% carbon concentration in the exterior region, indicating likely titanium carbide creation. X-ray diffraction identifies titanium carbide peaks, while microscopy and elemental mapping confirm compositional gradients at the interface.
Electron Backscatter Diffraction (EBSD) shows a gradient in grain size near the TiC surface, reflecting TiC nucleation rates. XRD data detect both titanium carbide and titanium phases, with TiC becoming more prominent at 1050 ◦C. Rietveld analysis further confirms TiC formation. Notably, distinct diffraction patterns on the contact and rear sides suggest a Ti(C, O, N) presence. Depth profiles exhibit varying surface and depth carbon concentrations, attributed to temperature effects. The study successfully demonstrates TiC coating fabrication through hot pressing, wherein Ti(C, O, N) coatings arise from titanium’s affinity for reacting with oxygen and nitrogen. This research contributes to the understanding of phase transformations and interfacial properties in titanium-carbon steel systems.
During the hot pressing of pure titanium and different carbon steels in a temperature range of ϑ = 950–1050 °C, a compound layer up to dL≈10 μm thick is formed at the titanium–steel interface. With a higher carbon content of the used steel, the layer thickness increases. The carbon concentration within the layer is in the range of stoichiometry for TiC. Apart from TiC, no other phases can be detected by X-ray diffraction (XRD) measurements inside the formed layer. The calculation of the activation energy for the TiC layer formation is Q = 126.5–136.7 kJ mol−1 and is independent of the carbon content of the steel. The resulting microstructure has a grain size gradient, wherein the mechanical properties, such as hardness and Young‘s modulus, are almost constant. Statistical analysis using Response Surface Methodology (RSM) indicates that the carbon content of the steel has the most significant influence on layer thickness, followed by annealing temperature and annealing time. By selecting the appropriate carbon steel and the subsequent removal of the steel, it is possible to produce targeted TiC layers on titanium substrates, which holds enormous potential for this material in wear-intensive applications.