• Treffer 4 von 5
Zurück zur Trefferliste

Automated weld seam evaluation and 2D simulation parameter calibration for absorber-free laser transmission welding

  • Absorber-free laser transmission welding enables clean and precise joining of plastics without additives or adhesives. It is therefore well suited to produce optical and medical devices, which place high demands on cleanliness and accuracy. However, the weld usually has an undesirably large vertical expansion, causing bulges and distortion. To improve this, the intensity distribution of the laser beam as well as the processing strategy must be adapted. Due to the complexity, this is aided by process simulation. However, simulation parameter calibration and verification are usually done considering the seam width and height, which is of limited significance. To overcome this, we propose a new method for image processing of microtome sections, determining the spatially resolved geometry of the weld. Thus, the deviation between experiment and simulation can be calculated pixel by pixel. This spatially resolved value is predestined for the calibration of the simulation parameters: For a parameter field with 18 different settings, the total deviation between experiment and simulation is less than 11 % after calibration.

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Verfasserangaben:Frederik MaiwaldORCiD, Johannes Tröger, Stefan HierlGND
URL / DOI:https://www.wlt.de/sites/default/files/2023-09/Contribution_122.pdf
Titel des übergeordneten Werkes (Englisch):Lasers in Manufacturing Conference (LIM 2023), 26. Juni bis 29. Juni 2023, München
Verlag:Wissenschaftliche Gesellschaft Lasertechnik und Photonik e.V. (WLT)
Dokumentart:Konferenzveröffentlichung (Beitrag)
Sprache der Veröffentlichung:Englisch
Jahr der Veröffentlichung:2023
Datum der Freischaltung:13.10.2023
Freies Schlagwort / Tag:image processing; optimization; plastics welding; simulation
Seiten/Abspieldauer:10
Fakultäten / Institute / Einrichtungen:Fakultät Maschinenbau
Fakultät Maschinenbau / Labor Laser-Materialbearbeitung (LMP)
Forschungsschwerpunkt:Produktion und Systeme
Lizenz (Deutsch):Keine Lizenz - Es gilt das deutsche Urheberrecht: § 53 UrhG