Refine
Year of publication
- 2021 (10) (remove)
Document Type
Publication reviewed
- begutachtet (10)
Institute
The Efficiency and Profitability of the Modular Multilevel Battery for Frequency Containment Reserve
(2021)
The modular multilevel battery (M2B) is a novel approach to integrate battery storage into the electricity grid. This paper obtains the efficiency and financial benefits of a working prototype system, compared to conventional systems for frequency containment reserve (FCR). The efficiency is determined with a low-level simulation that models the conduction losses on the circuit, the MOSFETs’ switching and conduction losses, and the system consumption. The simulation model shows, that the efficiency is superior to conventional inverters over the entire operating range. The operation for FCR shows a cost-reduction of 50% for transactions on the intraday market, resulting in a 72.9% higher net-profit after 10 years.
Both global climate change and the decreasing cost of lithium-ion batteries are enablers of electric vehicles as an alternative form of transportation in the private sector. However, a high electric vehicle penetration in urban distribution grids leads to challenges, such as line over loading for the grid operator. In such a case installation of grid integrated storage systems represent an alternative to conventional grid reinforcement. This paper proposes a method of coordinated control for multiple battery energy storage systems located at electrical vehicle charging parks in a distribution grid using linear optimization in conjunction with time series modeling. The objective is to reduce the peak power at the point of common coupling in existing distribution grids with a high share of electric vehicles. An open source simulation tool has been developed that aims to couple a stand alone power flow model with a model of a stand alone battery energy storage system. This combination of previously disjointed tools enables more realistic simulation of the effects of storage systems in different operating modes on the distribution grid. Further information is derived from a detailed analysis of the storage system based on six key characteristics. The case study involves three charging parks with various sizes of coupled storage systems in a test grid in order to apply the developed method. By operating these storage systems using the coordinated control strategy, the maximum peak load can be reduced by 44.9%. The rise in peak load reduction increases linearly with small storage capacities, whereas saturation behavior can be observed above 800 kWh.
Stationäre Batteriespeicher gewinnen sowohl im privaten als auch im gewerblichen Bereich weiterhin an Relevanz:
Fortschritte in Zell- und Systemtechnologie erlauben innovative und kostengünstigere Lösungen, neue Geschäftsfelder werden erschlossen und rechtliche Rahmenbedingungen sind im stetigen Wandel. Dieser Artikel fasst die wichtigsten Entwicklungen und Branchen-Trends für 2021 in Deutschland zusammen und untermauert diese anhand von Umfragen des Experten-Fachforums „BVES Fachforum Batteriespeicher“. Zusätzlich zu einer Markt- und Kostenprognose erlaubt die Auswertung einen Blick auf mögliche neue Anwendungsfelder sowie eine Branchenempfehlung zu Handlungsfeldern in den Bereichen Recht und Regulatorik.
Electric vehicles (EVs) can participate in various markets through a vehicle-to-grid (V2G) interface. Aggregators can combine the individual contributions of EVs to offer them, for example, on the frequency containment reserve (FCR) market or to use them for arbitrage trading. A simple approach is combining EVs in random fashion until the pool is able to reach the threshold for a service of choice. Alternatively, aggregators can compose their pools in smart fashion and include only EVs that contribute significantly to the pool's performance. In a previous publication, we have shown that optimizing the aggregated pools of commercial vehicles for the provision of FCR or arbitrage trading can increase revenues by up to 7-fold. In this work, we analyze the optimally composed pools and show that large vehicle batteries in the order of 80 kWh are particularly useful for arbitrage trading, while FCR provision is also possible with medium-sized EV batteries in the range of 30 kWh due to the small cycle depths. The inclusion of EVs with very small vehicle batteries around 20 kWh in aggregated pools is neither economically optimal for arbitrage trading nor for FCR provision. An analysis of the economic sectors of the commercial EVs selected for the optimal EV pools shows that some economic sectors are more suitable for V2G than others: In particular EVs of the sector “human health and social work activities” are unsuitable for V2G provision due to regular and long travel times during the day. In contrast, EVs from the "manufacturing" sector are particularly well represented in all applications and the "transportation and storage" sector in the arbitrage application. In addition to these analyses of the optimized pools, we reveal that a reduction in the required minimum power and increments would make the FCR market even more attractive to EV pools by increasing revenues by 50% to 66%. It would also better exploit the potential of EVs, as increments could be better utilized than they are in the current 1 MW minimum power requirement in central Europe.
A high electric vehicle penetration in urban distribution grids leads to challenges, such as line over loading for the grid operator. In such a case smart charging strategies or the installation of grid integrated storage systems represent an alternative to conventional grid reinforcement. This paper examines the influence of various charging strategies at electric vehicle charging parks to the peak grid load. Furthermore, the battery energy storage systems with various capacities located at these charging parks are simulated with a control strategy aiming to reduce the impact to the grid. Results show that with controlled charging strategies the capacity of the storage systems at the charging parks can be reduced from 2MWh to 600kWh while achieving the same reduction of peak load at the point of common coupling
Battery-Assistance vs. Grid Reinforcement for High-Power EV Charging: An Emissions Perspective
(2021)
An increasingly large number of battery electric vehicles (BEVs) and electric buses are hitting the roads globally each year. These numbers are expected to grow further in light of ever-more favourable costs, and improved battery technology that addresses concerns about range anxiety and charging times. This upward trend in electrification of the automobile sector essentially shifts the mobility energy demand from the oil & gas sector to the electricity sector. Power transmission bottlenecks in the grid, caused on the supply-side by periods of strong renewable generation, may get further aggravated by adding demand-side bottlenecks to the mix as well. The grid, at several locations, will need to be overhauled to be able to supply huge bursts of power intermittently to cover large power demands to support fast-charging simultaneously at multiple locations. This can entail huge monetary investments for the upgradation of grid infrastructure. Battery-assisted high power charging (BA-HPC) is thought of as a convenient solution to this problem. This solution enables demand-side peak- load shaving, and draws energy more uniformly over extended periods of time. While this solution may well be economically profitable in some cases, an investigation of the environmental impact of this solution can yield interesting insights, and aid decision-makers by identifying scenarios in which one solution is more favorable over the other. This is crucial, since the rationale for shifting to electromobility is the curbing of greenhouse gas emissions. In this work, we employ in-house python-based time-series analysis simulation tools to simulate the grid reinforcement and the battery energy storage systems, and present comparative lifetime emissions analyses for both solutions in a variety of configurations.
Electrical energy storage systems are key to the integration of intermittent renewable energy technologies such as photovoltaic solar systems and wind turbines. As installed battery energy storage system capacities rise, it is crucial that the environmental impacts of these systems are also positive. In this work, a methodology to ascertain the effect and effectiveness of integration of energy storage on the carbon footprint of isolated island grid energy systems and its reduction is presented. Two metrics are introduced — the Levelized Emissions of Energy Supply (LEES), and the reduction in emissions per additional unit of energy storage (R). The proposed methodology is applied to an island grid scenario to ascertain the variation in the LEES value with the peak power and energy storage capacity of the BESS. A simplified LCA of a utility-scale Lithium-ion BESS is also carried out for this purpose. It is found that for the considered scenarios, incorporation of battery systems is always effective in reducing emissions, with a maximum possible reduction of nearly 50% compared to no storage. With the help of the metric R, the proposed methodology is also useful in identifying isolated energy systems which should be prioritized for incorporation of additional energy storage capacity.
The growing global electricity demand and the upcoming integration of charging options for electric vehicles is creating challenges for power grids, such as line over loading. With continuously falling costs for lithium-ion batteries, storage systems represent an alternative to conventional grid reinforcement. This paper proposes an operation strategy for battery energy storage systems, targeted at industrial consumers to achieve both an improvement in the distribution grid and electricity bill savings for the industrial consumer. The objective is to reduce the peak power at the point of common coupling in existing distribution grids by adapting the control of the battery energy storage system at individual industrial consumer sites. An open-source simulation tool, which enables a realistic simulation of the effects of storage systems in different operating modes on the distribution grid, has been adapted as part of this work. Further information on the additional stress on the storage system is derived from a detailed analysis based on six key characteristics. The results show that, with the combined approach, both the local peak load and the global peak load can be reduced, while the stress on the energy storage is not significantly increased. The peak load at the point of common coupling is reduced by 5.6 kVA to 56.7 kVA and the additional stress for the storage system is, on average, for a six month simulation, period only 1.2 full equivalent cycles higher.
The rapid decentralization of energy generation and storage facilitates an opportunity to redesign existing energy systems. Here, peer-to-peer energy trading in local markets offers advantages for demand response and flexibility of energy delivery, yet it still faces problems of customer acceptance, namely, concerns over sharing control of batteries and the degradation impacts of increased cycles. To help overcome these hurdles, this research develops a techno-economic model that optimizes the interplay between peer-to-peer trading and energy management systems in a community. The model distinguishes between two decision making approaches in a local electricity market: decentral, where the household retains full control over its storages, and central, where the flexibilities are fully leveraged to maximize the community benefit. Both approaches demonstrate the significant monetary benefit of peer-to-peer trading, with the central approach reaching the greatest profitability potential. Negative effects on the battery lifetime only occur in the central case with bidirectional vehicles, and the degradation is comparatively slight.
Driven by the need for a sustainable energy transition and a paradigm shift in the energy and mobility sectors, the popularity of electric vehicles is on the rise. Learning curve effects and falling investment costs further accelerate the deployment of electric vehicles with lithium-ion batteries; and as a multi-purpose technology, they are predestined for serving multiple applications. In this work we present an electric vehicle multi-use approach for a German commercial electricity consumer with an electric vehicle fleet. We analyze which behind-the-meter and in front-of-the-meter applications are particularly suitable for electric vehicles from a techno-economic point of view. In addition to providing the mobility service, we investigate the applications self-consumption increase, peak shaving, frequency regulation, and spot market trading. For the implementation of the approach, we introduce a model predictive control framework in which a mixed-integer linear programming algorithm is combined with a semi-empirical degradation model. The approach is analyzed with the investigation of fleet sizes from 1 to 150 vehicles, different application combinations, possible energy shift between the energy partitions, bidirectional charging schemes, and degradation awareness formulations. The results show that the deployment flexibility and application synergies increase with the number of stacked services, leading to additional annual cash flows of up to 2224 EUR per electric vehicle as well as battery lifetime improvements.