Refine
Keywords
- Lumineszenzdiode (8)
- Sintern (6)
- Leistungselektronik (4)
- Lötverbindung (4)
- Bragg grating sensors (3)
- Bragg-Reflektor (3)
- Kupfer (3)
- Lithium-Ionen-Akkumulator (3)
- cyclic olefin copolymers (3)
- Computertomographie (2)
- Hochtemperatur (2)
- Löten (2)
- carbon fiber reinforced polymers (2)
- 3D, (1)
- Akkumulator (1)
- Ausfallanalyse (1)
- Aushärtung (1)
- Bragg Grating (1)
- Buckelschweißen (1)
- Composites (1)
- Computertomografie (1)
- Cyclic Olefin Copolymers (1)
- Differential scanning calorimetry (1)
- Drucksensor (1)
- Elektrofahrrad (1)
- Elektronische Baugruppe (1)
- Fahrrad (1)
- Fehleranalyse (1)
- Gedruckte Schaltung (1)
- Glaslot (1)
- Intermetallische Verbindungen (1)
- Leistungshalbleiter (1)
- Life cycle assessment; Solder; Sinter; Die-attach; Power electronics; Environment (1)
- Load Monitoring (1)
- Metallographie (1)
- Micromilling (1)
- Oberflächenanalyse (1)
- Optischer Sensor (1)
- Pedelec (1)
- Pore (1)
- Silbersintern (1)
- Sintern, Silber, Kupfer (1)
- Solarzelle (1)
- Thermische Belastung (1)
- Trägersubstanz (1)
- UV-LED Modul (1)
- Verbundwerkstoff (1)
- X-ray (1)
- Zuverlässigkeit (1)
- fiber-to-chip coupling (1)
- interfacial reactions (1)
- intermetallic compounds (1)
- micromilling (1)
- microstructures (1)
- structural health monitoring (1)
Year of publication
Document Type
- Article (24)
- Conference Proceeding (9)
- Part of a Book (1)
LUVLED III – Optimierung eines Kühlkonzeptes zur Aktivluftkühlung eines Hochleistungs-UV-LED-Moduls
(2012)
This article proposes and demonstrates a robust microstructure-based fiber-to-chip coupling scheme for planar Bragg grating devices. A polymer planar Bragg grating substrate is manufactured and microstructured by means of a micromilling process, while the respective photonic structures are generated by employing a sophisticated single-writing UV-exposure method. A stripped standard single mode fiber is inserted into the microstructure, which is filled with a UV-curable adhesive, and aligned with the integrated waveguide. After curing, final sensor assembly and thermal treatment, the proposed coupling scheme is capable of withstanding pressures up to 10 bar, at room temperature, and pressures up to 7.5 bar at an elevated temperature of 120 °C. Additionally, the coupling scheme is exceedingly robust towards tensile forces, limited only by the tensile strength of the employed single mode fiber. Due to its outstanding robustness, the coupling scheme enables the application of planar Bragg grating devices in harsh environments. This fact is underlined by integrating a microstructure-coupled photonic device into the center of a commercial-grade carbon fiber-reinforced polymer specimen. After its integration, the polymer-based Bragg grating sensor still exhibits a reflection peak with a dynamic range of 24 dB, and can thus be employed for sensing purposes.
This study demonstrates mobile load monitoring of a composite bicycle component using an application-
customized polymer planar Bragg grating sensor, evaluated by a mobile interrogation unit. After a referencing procedure, the mechanical load of a seat post is monitored while cycling through a test track.
In this paper, we present two nondestructive characterization methods for the detection of voids in rear local contacts of passivated emitter and rear-type solar cells, namely scanning acoustic microscopy and computer tomography. We compare both methods and include a comparison with electroluminescence measurements. It is shown in this paper that voids can easily be detected with both measurement types without any sample preparation. We found a good match of scanning acoustic microscopy (SAM) and computer tomography (CT), which is presented for this purpose for the first time. The investigation was carried out for different aluminum pastes.
This contribution demonstrates the functionality of polymer planar Bragg grating (PPBG) sensors integrated into commercial-grade carbon fiber reinforced polymer (CFRP) components. Multiple CFRP specimens are generated by curing a stack of pre-impregnated fibers inside of a heated mechanical press, exposing the polymer sensor to a pressure of 7 bar and a temperature of 120 °C for 2 h. After integration, the sensor still exhibits a strong and evaluable signal. Subsequent flexural experiments reveal a linear response of the integrated sensor’s Bragg wavelength to the CFRP specimen’s maximum deflection. Additional findings demonstrate that the embedded PPBG can be used to detect plastic deformations of a CFRP workpiece, whereas a linear correlation of plastic deformation to the resulting Bragg signal offset is determined. A plausibility check of the obtained results is delivered by a comparison of three-point flexural experiments on bulk CFRP workpieces, without integrated sensors and additional specimens featuring external optical sensors affixed to their surface. It is found that PPBGs based on cyclic olefin copolymers are able to overcome the temperature-related limitations of traditional polymer-based optical sensors and can thus be directly integrated into commercial-grade composites during production.