Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2019 (287) (entfernen)
Dokumenttyp
- Vortrag (287) (entfernen)
Sprache
- Englisch (287) (entfernen)
Referierte Publikation
- nein (287) (entfernen)
Schlagworte
- Additive Manufacturing (29)
- Corrosion (19)
- MIC (9)
- Microstructure (9)
- Welding (9)
- Additive manufacturing (8)
- Diffraction (8)
- Surface functionalization (8)
- Magnetocaloric (7)
- Nanoparticle (7)
- Residual stress (7)
- Energy harvesting (6)
- Fluorescence (6)
- Glass (6)
- Hydrogen (6)
- In situ (6)
- Laser-induced periodic surface structures (LIPSS) (6)
- Material Science (6)
- Methanogens (6)
- Nanocomposites (6)
- Nanoparticles (6)
- Applications (5)
- Boehmite (5)
- Calibration (5)
- Computed Tomography (5)
- Computed tomography (5)
- Dye (5)
- Femtosecond laser (5)
- NIR (5)
- Neutron Diffraction (5)
- Quantum dot (5)
- Rigid amorphous fraction (5)
- Thermography (5)
- 316L (4)
- 3D printing (4)
- Atomic Force Microscopy (AFM) (4)
- Ceramic (4)
- Creep-resistant steel (4)
- Femtosecond laser ablation (4)
- Friction (4)
- Laser-induced periodic surface structures, LIPSS (4)
- Lifetime (4)
- Mechanochemistry (4)
- Microplastics (4)
- Non-Destructive testing (4)
- Non-destructive testing (4)
- Numerical simulation (4)
- Post weld heat treatment (4)
- Quantum yield (4)
- Residual Stress (4)
- SAXS (4)
- Synchrotron (4)
- TED-GC-MS (4)
- Wear (4)
- Archaeometry (3)
- Ceramic spring (3)
- Crack growth (3)
- Crevice corrosion (3)
- ECA (3)
- Electron microscopy (3)
- Harmonisation (3)
- IR (3)
- Ink (3)
- Keyhole mode welding (3)
- Laser Metal Deposition (3)
- Laser beam welding (3)
- Laser implantation (3)
- Materials science (3)
- Mechanical properties (3)
- Multiplexing (3)
- NDT (3)
- Neutron diffraction (3)
- Non-destructiv testing (3)
- Process monitoring (3)
- Reference materials (3)
- SWIR (3)
- Simulation (3)
- Solidification cracking (3)
- Stress relief cracking (3)
- Tensile properties (3)
- Traceability (3)
- Uncertainty (3)
- Water content (3)
- X-Ray imaging (3)
- X-ray computed tomography (3)
- X-ray scattering (3)
- AISI D2 (2)
- AM (2)
- Absolute fluorometry (2)
- Acoustic levitation (2)
- Additive Manufacturing (AM) (2)
- Ageing (2)
- Anisotropy (2)
- Arabic Recipes (2)
- Archaea (2)
- Assay (2)
- Austenitic stainless steels (2)
- BDS (2)
- Bead (2)
- Carbon steel (2)
- Cement (2)
- Ceramics (2)
- Chemical composition (2)
- Cleavable probe (2)
- Compatibility (2)
- Compatibility evaluations (2)
- Composites (2)
- Copolymer (2)
- Copper (2)
- Coptic (2)
- Corrosion monitoring (2)
- Cultural heritage (2)
- DCB (2)
- Desinfection (2)
- Diffusion (2)
- Digitalization (2)
- Diopside (2)
- Distributed fibre optic sensing (2)
- Drinking (2)
- Duplex (2)
- Durability (2)
- EPDM (2)
- EPMA (2)
- Electromagnetic Weld Pool Support (2)
- Encoding (2)
- Environmental Simulation (2)
- FKM (2)
- Fatigue (2)
- Flow cytometry (2)
- Full Penetration (2)
- Geothermal (2)
- Glass transition (2)
- HNBR (2)
- High-strength steel (2)
- Hybrid Laser Arc Welding (2)
- Hybrid composite pressure vessel (2)
- Hydrogen-assisted cracking (2)
- In situ measurement (2)
- Inks (2)
- Integrating sphere spectroscopy (2)
- LIBS TIG welding (2)
- Laser Beam Welding (2)
- Laser Powder Bed Fusion (2)
- Laser Powder Bed Fusion (L-PBF) (2)
- Laser-induced X-ray emission (2)
- Layerwise (2)
- Manuscripts (2)
- Material science (2)
- Materials Science (2)
- Metals (2)
- Method (2)
- Microbiologically influenced corrosion (2)
- Modeling (2)
- Monte Carlo (2)
- Nanocharacterisation (2)
- Nanoplastics (2)
- Nanostructure (2)
- Non destructive analytical techniques (2)
- Open data (2)
- Open science (2)
- Orientation (2)
- Oxidation (2)
- Particle size distribution (2)
- Phase transformation (2)
- Photoluminescence (2)
- Pitting (2)
- Polyaniline (2)
- Polymer matrix composites (2)
- Polymers (2)
- Polymers of intrinsic microporosity (2)
- Powder (2)
- Pyrotechnics (2)
- Quality assurance (2)
- Qualitätssicherung (2)
- Quantum dots (2)
- Radiation protection (2)
- Research data management (2)
- Residual stresses (2)
- Sensor (2)
- Shore hardness (2)
- Slurry (2)
- Small-angle X-ray scattering (2)
- Spectroscopy (2)
- Stainless Steel (2)
- Structural health monitoring (2)
- Sulfate reducing bacteria (2)
- Surface texturing (2)
- TMDSC (2)
- Thick Materials (2)
- Thin films (2)
- TiB2 (2)
- Tribology (2)
- Ultrashort laser material interaction (2)
- VAMAS (2)
- Water (2)
- Weld metal (2)
- Weld pool shape (2)
- X-Ray Imaging (2)
- X-ray refraction (2)
- X-ray refraction techniques (2)
- XRD (2)
- Zero-g (2)
- corrosion (2)
- µ-gravity (2)
- 1D-Simulation (1)
- 3D Druck (1)
- 3D inspection (1)
- 3D-Printing (1)
- 3d structuring (1)
- AFM (1)
- AFM-IR (1)
- AFM-Kraft-Abstand-Kurven (1)
- AGIL (1)
- AIS (1)
- AM IN718 alloy (1)
- Absorption edge tomography (1)
- Acoustic Emission (1)
- Acoustic emission analysis (1)
- Activation energy (1)
- AdCo Explosives (1)
- Additive Fertigung (1)
- Adhesive joint (1)
- Adsorbed layer (1)
- Advanced high strength steel (1)
- Advanced materials (1)
- Aerosol measurements (1)
- Ageing behaviour (1)
- Aktive Thermographie (1)
- Alite (1)
- Alkali-silica reaction (1)
- Aluminium (1)
- Aluminum alloy (1)
- Anisotropy estimate (1)
- Approval (1)
- Arabic recipes (1)
- Arbitrary trajectories (1)
- Arrhenius (1)
- AuNP (1)
- Autocorrelation (1)
- BAMline (1)
- Barcoding (1)
- Bead-based assay (1)
- Beamline (1)
- Bio-based concrete (1)
- Bioceramics (1)
- Biodiesel (1)
- Biofilmbildung (1)
- Black Ink (1)
- Blähen (1)
- Boundary element method (1)
- Breakdown strength (1)
- Bulge (1)
- Bulging (1)
- C3A (1)
- C3S (1)
- CCS (1)
- CCU (1)
- CE-ICP-MS (1)
- CFRP (1)
- CO2 (1)
- Cable (1)
- Calcium peroxid (1)
- Capture (1)
- Carbon (1)
- Carbon Capture, Utilization and Storage (CCUS) (1)
- Carbon capture (1)
- Centrifugal Force (1)
- Certification Standard 22 (1)
- Certified reference materials (1)
- Chaboche model (1)
- Chemical admixtures (1)
- Chemisch instabile Gase (1)
- Chemo-mechanical coupling (1)
- Circumferential welds (1)
- Coal dust (1)
- Coating (1)
- Codicology (1)
- Cohesive Elements (1)
- Composite pressure vessel (1)
- Compression set (1)
- Compressive Cyclic loading (1)
- Compressive Stress (1)
- Computed tomography (CT) (1)
- Concrete bridges (1)
- Concrete motorway pavements (1)
- Condensation (1)
- Conductometry (1)
- Contact resonance (1)
- Content of calcium peroxide (1)
- Convection coefficient (1)
- Cordierite (1)
- Corrosion product (1)
- Corrosion products (1)
- Coupled corrosive and mechanial load (1)
- Crack Propagation (1)
- Crack propagation (1)
- Creep (1)
- Crevice (1)
- Crosslinking (1)
- Cryogenic Engineering (1)
- Crystal Plasticity Modelling (1)
- Crystal plasticity (1)
- Crystallization (1)
- Curing (1)
- Curved surfaces (1)
- Cyclic R-curve (1)
- Damage tolerant component design (1)
- Dangerous Goods (1)
- Data fusion (1)
- Data processing (1)
- Data storage (1)
- Database (1)
- Declarations of conformity (1)
- Deep learning (1)
- Defect detection (1)
- Defekte Eigenspannung (1)
- Deformation behavior (1)
- Delayed addition (1)
- Deposition welding (1)
- Desiccation (1)
- Dielectric strength (1)
- Digital (1)
- Digital twin (1)
- Dilatometry (1)
- Direct Energy Deposition (1)
- Direct Laser Metal Deposition (1)
- Direct energy deposition (1)
- Dislocations (1)
- Distributed humidity sensor (1)
- Distributed sensor (1)
- Dosimetry (1)
- Drop test (1)
- Droplet corrosion (1)
- Dual-energy (1)
- Dye labeling (1)
- Dynamic mechanical analysis (1)
- Dynamisch Mechanische Analyse (1)
- EASA (1)
- Early hydration (1)
- Early oxidation (1)
- Eddy Current (1)
- Eddy current testing (1)
- Eexisting structures (1)
- Elastic Constants (1)
- Elastic constants (1)
- Electrochemical impedance spectroscopy (1)
- Electromagnetic radiation (1)
- Electromagnetic scattering (1)
- Electromagnetic weld pool support (1)
- Electronic Detonators (1)
- Electrospun fibers (1)
- Elemenet transport (1)
- Element transport (1)
- Ellipsometric porosimetry (1)
- Ellipsometry (1)
- Emerging technologies (1)
- End crater (1)
- End-crater (1)
- Engineering applications (1)
- Environment (1)
- Environmental simulation (1)
- Environmental stress cracking (1)
- Epoxy (1)
- Erstarrungsriss (1)
- Explosionsgrenzen (1)
- Explosivstoffe (1)
- Extracellualr vesicles (1)
- FAME (1)
- FT-IR (1)
- Failure test (1)
- Fast scanning calorimeter (1)
- Fast scanning calorimetry (1)
- Fatigue Crack Propagation (1)
- Fatigue Life Evaluation (1)
- FeCr- alloys (1)
- Fiber reinforced polymer (1)
- Filtered back projection (1)
- Filters (1)
- Fine Powder (1)
- Finite elements (1)
- Fire damp (1)
- Flame retardant (1)
- Flammability (1)
- Flash DSC (1)
- Flow-system (1)
- Flowability (1)
- Fluorescence standard (1)
- Foaming (1)
- Force distance curve (1)
- Force-distance diagram (1)
- Fractography (1)
- Fracture surface analysis (1)
- Fragmentation (1)
- Freeze Drying (1)
- Full-Notch Creep Test (FNCT) (1)
- Fume (1)
- GFK (1)
- GMR (1)
- GTN model (1)
- Gallium doping (1)
- Gas analytic (1)
- Geant4 (1)
- Gefahrgut (1)
- Gefahrstoff (1)
- Glas (1)
- Glass powder (1)
- Glass scanning (1)
- Glass screening device (1)
- Glue (1)
- HAZPRED (1)
- HI-Tension (1)
- HPC (1)
- Hard machining (1)
- Harmonised Standards (1)
- Heat conduction (1)
- Heating oil (1)
- Heating oil - biodiesel - blend (1)
- Heating oil with 10% biodiesel (1)
- Heating oil with 20% biodiesel (1)
- Heating oil-Biodiesel-Blend (1)
- Heißriss (1)
- High Temperature Testing (1)
- High entropy alloys (1)
- High temperature (1)
- High temperature corrosion (1)
- High-entropy alloys (1)
- High-power laser beam (1)
- High-strength concrete (1)
- High-strength steels (1)
- High-temperature corrosion (1)
- Highspeed plasma (1)
- Hot Cracking (1)
- Hot cracking (1)
- Hot steam (1)
- Hybrid laser-arc welding (1)
- Hydrogen Embrittlement (1)
- Hydrogen methane (1)
- IAEA fire (1)
- IIT (1)
- ISO (1)
- ImAFM (1)
- Implant test (1)
- Implant-test (1)
- Implants (1)
- InP (1)
- Indium phosphide (1)
- Infrared Thermography (1)
- Infrared thermography (1)
- Ink terminology (1)
- Institut Laue Langevin (1)
- Instrumented Indentation Testing (1)
- Integrating sphere spectroscopy, (1)
- Inter-laboratory comparison (1)
- Interdisciplinary (1)
- Interfaces (1)
- Internal friction (1)
- Introduction (1)
- Inverse Problems (1)
- Iron isotope fractionation (1)
- Kennzeichnung (1)
- Keyhole mode laser beam welding (1)
- Konformitätserklärung (1)
- Kristallisation (1)
- Kältemittel (1)
- L-PBF (1)
- LBM (1)
- LC / MALDI-TOF-MS coupling (1)
- LC x ESI-TOF-MS (1)
- LC-MS (1)
- LCCC (1)
- LIMS (1)
- LLG (1)
- LME (1)
- LPBF (1)
- LT-FCM (1)
- LTT (1)
- LTT filler material (1)
- Labelling (1)
- Lack-of-fusion (1)
- Lamb waves (1)
- Laminography (1)
- Lanthanide (1)
- Large-scale test (1)
- Laser Powder Bed Melting (1)
- Laser Pulver Auftragsschweißen (1)
- Laser Scanning Microscopy (LSM) (1)
- Laser cladding (1)
- Laser dispersing (1)
- Laser hybrid welding (1)
- Laser metal deposition (1)
- Laser surface texturing (1)
- Layer formation (1)
- Layerwise Slurry Deposition (1)
- Layerwise slurry deposition (1)
- Leather (1)
- Levitation (1)
- Liquid Crystals (1)
- Load partition (1)
- Localised corrosion (1)
- Low Cycle Fatigue (1)
- Low Transformation Temperature (1)
- Lubricants (1)
- Lubrication (1)
- MCS (1)
- MHD (1)
- MOF (1)
- MVT (1)
- Magnetic field (1)
- Magnetic nanoparticle (1)
- Magnetocoloric (1)
- Magnetohydrodynamics (1)
- Maintenance (1)
- Market surveillance (1)
- Marktüberwachung (1)
- Martensite (1)
- Mass spectrometry (1)
- Mass spectrometry of polymers (1)
- Material characterization (1)
- Measurement (1)
- Mechanical behavior (1)
- Mechanical strength (1)
- Mesoporous iridium-titanium mixed oxides (1)
- Mesoporous mixed metal oxide films (1)
- Metal Matrix Composite (1)
- Metal matrix composite (1)
- Metal reducing bacteria (1)
- Metal-organic-frameworks (1)
- Metallic seal (1)
- Metalls (1)
- Metal–organic frameworks (1)
- Methane (1)
- Method comparison (1)
- Method validation (1)
- Methos comparision (1)
- Microanalysis (1)
- Microbeam analysis (1)
- Microbial (1)
- Microbially induced corrosion (1)
- Microcracking (1)
- Microdosimetry (1)
- Microhardness (1)
- Micromagnetism (1)
- Microparticle (1)
- Microstructural analysis (1)
- Microstructure Characterization (1)
- Microstructure characterisation (1)
- Microstructure evolution (1)
- Mixed Ca-K-Na phosphates (1)
- Modelling (1)
- Modified Varestraint-/Transvarestraint test (1)
- Moisture clog (1)
- Moisture transport (1)
- Molecular masses (1)
- Molten pool dynamics (1)
- Monte-Carlo simulation (1)
- Mortel (1)
- Mueller-Matrix Ellipsometry (1)
- Mueller-Matrix imaging ellipsometry (1)
- Multi-layered system (1)
- Multiphoton laser structuring (1)
- NMR (1)
- Na and K rhenanites (1)
- Nano (1)
- Nano particle (1)
- Nano screening (1)
- NanoSIMS (1)
- Nanocomposite (1)
- Nanocrystal (1)
- Nanomaterial (1)
- Nanorods (1)
- Nanoscale (1)
- Nanostructure quantification (1)
- New standards (1)
- Next Generation Sequencing (1)
- Nicht-lineare Regression (1)
- Non destructive testing (1)
- Non-destructuve testing (1)
- Non-spherical shape (1)
- Nondestructive testing (1)
- Notified bodies (1)
- OOMMF (1)
- OTDR (1)
- On-site mixed Explosives (1)
- Ooxidation (1)
- Optical Tomography (1)
- Optical assay (1)
- Optical emission spectroscopy (1)
- Optical fiber sensor (1)
- Optical spectroscopy (1)
- Optical tomography (1)
- Organic peroxides (1)
- Oxygen evolution reaction (1)
- PC characterisation (1)
- PEG (1)
- PMMA (1)
- Package (1)
- Package testing (1)
- Paint (1)
- Papyrus (1)
- Parchment (1)
- Partial penetration (1)
- Partial penetration laser hybrid welding (1)
- Particle gas emission (1)
- Particle size (1)
- Peptide Library (1)
- Peptides (1)
- Performance test (1)
- Performance validation (1)
- Periodic inspections (1)
- Permitted explosives (1)
- Phage Display (1)
- Phase diagram (1)
- Phase transformations (1)
- Phase-field simulation (1)
- Photon counting detector (1)
- Photoresist (1)
- Pipeline steel X120 (1)
- Plasma-Transferred-Arc (1)
- Plastic (1)
- Plume (1)
- Polyamide 12 (1)
- Polycarboxylate ether (PCE) (1)
- Polyethylene Glycol (1)
- Polyethylene, PE-HD (1)
- Polymer (1)
- Polymer aging (1)
- Polymer blends (1)
- Polymer composites (1)
- Polymer materials (1)
- Polymer nanocomposites (1)
- Polymer optical fiber (1)
- Polymeric materials (1)
- Polysaccharides (1)
- Polyurethane (1)
- Pores (1)
- Porous ceramics (1)
- Practical aspects (1)
- Pre-standardisation (1)
- Projection matrix (1)
- Propane gas fire test facility (1)
- Protein (1)
- Prüfmethode (1)
- Pyrotechnik (1)
- QSPR (1)
- Quality assurcance (1)
- Quantum yields (1)
- RME (1)
- RRT (1)
- RSW (1)
- Radioactive NP (1)
- Radioactive material (1)
- Radioactive sources (1)
- Raman microscopy (1)
- Raman spectroscopy (1)
- Rayleigh scattering (1)
- Reconstructed ion chromatograms (1)
- Reference material (1)
- Reference methods (1)
- Refraction (1)
- Reheat cracking (1)
- Representative material properties (1)
- Repräsentative Werkstoffeigenschaften (1)
- Residual Stresses (1)
- Residual stress analysis (1)
- Restoration and conservation (1)
- Restraint (1)
- Rheology (1)
- Rietveld (1)
- Ringversuch (1)
- Round robin tests (1)
- Rubber seal (1)
- SEC (1)
- SEM/EDS/STRATAGem (1)
- SKPM (1)
- SLM (1)
- SRB (1)
- Sailplane Development Panel (1)
- Scale-bridging (1)
- Scaled Boundary FEM (1)
- Scanning Electron Microscopy (SEM) (1)
- Scanning electron microscopy (1)
- Schadenstolerante Bauteilauslegung (1)
- Schmiermittel (1)
- Screening (1)
- Seal performance (1)
- Segmentation (1)
- Selective Laser Melting (SLM) (1)
- Selective Laser Sintering (SLS) (1)
- Selective laser melting (1)
- Self-reactive substances (1)
- Semiconductor (1)
- Shore Hardness (1)
- Silane (1)
- Silicon Carbide (1)
- Single particle spectroscopy (1)
- Sintering (1)
- Sintern (1)
- Size distribution (1)
- Sliding wear (1)
- Slow crack growth (1)
- Small Angle Neutron Scattering (1)
- Soda-lime silicate glass (1)
- Soda-lime-silica glass (1)
- Software (1)
- Solidification Cracking (1)
- Spatter (1)
- Speciation analysis (1)
- Spectroscopic Imaging (1)
- Spectroscopic ellipsometry (1)
- Spectroskopic Imaging (1)
- Spring constant (1)
- Spring constant (1)
- Stained glass (1)
- Stainless (1)
- Standardisation (1)
- Standardization (1)
- Standards (1)
- Steel (1)
- Storage (1)
- Stress analysis (1)
- Structural anomalies (1)
- Structural inhomogenities (1)
- Structural integrity (1)
- Structural safety (1)
- Structure-property relationship (1)
- Structured light scanning (1)
- Sulfidation (1)
- Superalloy (1)
- Supercritical/dense phase CO2 (1)
- Superelliptic Lamé curves (1)
- Surface analysis (1)
- Surface chemistry (1)
- Surface crystallization (1)
- Surface group (1)
- Surface group analysis (1)
- Surface modification (1)
- Surfaces (1)
- Synchrotron Energy Dispersive Diffraction (1)
- Synchrotron X-ray tomography (1)
- Synchrotron radiation (1)
- Synchrotron tomography (1)
- Synthetic air (1)
- Tanning (1)
- Tara Mediterranee (1)
- Technical Specification (1)
- Technological innovation (1)
- Tensile Properties (1)
- Tensile Stress (1)
- Tensile testing (1)
- Testing method (1)
- Themral cycles (1)
- Thermal degradation (1)
- Thermal testing (1)
- Thermal treatment (1)
- Thermografie (1)
- Thermogravimetry (1)
- Thermoplastic polyurethane (1)
- Thick-walled steels (1)
- Thin polymer films (1)
- Thin polymeric films (1)
- Ti-6Al-4V (1)
- Time-resolved flow cytometry (1)
- Time-temperature superposition (1)
- Titanium (1)
- Tool steel (1)
- Toughness (1)
- Transmission electron microscopy (1)
- Tribofilm (1)
- UHPC (1)
- UN-Test O.3 (1)
- UV degradation (1)
- Ultrafast scattering (1)
- Ultrasonic testing (1)
- Upconversion (1)
- Utilization (1)
- Utilization, and storage (CCUS) technology (1)
- VSSA (1)
- Vacuum hot extraction (1)
- Validierung (1)
- Varestraint (1)
- Virtual experiments (1)
- Viscoplasticity (1)
- Viskosität (1)
- Water speciation (1)
- Weathering resistance (1)
- Weld pool behavior (1)
- Weld pool shape approximation (1)
- Wind energy (1)
- Wood materials (1)
- X-ray CT (1)
- X-ray and electron diffraction (1)
- X-ray imaging (1)
- X-ray spectroscopic techniques (1)
- X-ray spectroscopy (1)
- XANES (1)
- Young's modulus (1)
- Zinc coated steel (1)
- Zinc coatings (1)
- Zirconia (1)
- Zonation (1)
- Zündenergie (1)
- Zündquellen (1)
- alumina (1)
- arbon capture (1)
- carbon steel (1)
- ceramics (1)
- condensate (1)
- copper (1)
- degradation (1)
- dielectric spectroscopy (1)
- electrochemical characterization (1)
- ethylene vinyl acetate (1)
- fatigue crack growth (1)
- gas separation membranes (1)
- geothermal energy (1)
- impurities (1)
- leakage (1)
- mechanical properties (1)
- microstructure analysis (1)
- molecular mobility (1)
- nanoindentation (1)
- performance test (1)
- pitting corrosion (1)
- polymers (1)
- polymers of intrinsic microporosity (1)
- polynorbornenes (1)
- product specification (1)
- rubber (1)
- selective laser melting (1)
- single cell-ICP-ToF-MS (1)
- single particle-ICP-ToF-MS (1)
- steel (1)
- uncertainty (1)
- utilization, and storage (CCUS) technology (1)
- volume resistivity (1)
- μCT (1)
Organisationseinheit der BAM
- 6 Materialchemie (74)
- 9 Komponentensicherheit (66)
- 8 Zerstörungsfreie Prüfung (55)
- 5 Werkstofftechnik (51)
- 8.5 Röntgenbildgebung (35)
- 9.3 Schweißtechnische Fertigungsverfahren (33)
- 7 Bauwerkssicherheit (29)
- 6.6 Physik und chemische Analytik der Polymere (23)
- 9.4 Integrität von Schweißverbindungen (23)
- 4 Material und Umwelt (21)
Eingeladener Vortrag
- nein (287)
Self-mated magnesia stabilized zirconia (Mg-PSZ) ceramic sliding couples have been investigated at 100 N load (P0max= 1324 MPa) in oscillating sliding conditions in different humidity conditions in air and in hot steam. Temperatures have been varied up to 400 °C and pressures up to 6 bars. The results show that the wear behavior of MgO-ZrO2 under high Hertzian contact pressures is strongly dependent on temperature and is similar for both dry oscillating and oscillating in hot steam. However, although the evolution in wear rates on temperature is similar and the wear rates of MgO-ZrO2 plunged above 300 °C in hot steam and air by nearly three orders of magnitude, SEM micrographs revealed in hot steam at 400 °C smooth wear tracks. In contrast, hot steam enhanced the tribochemistry of self-mated alumina couples and reduced wear rates. Hot steam decreased the coefficients of friction of MgO-ZrO2 with increasing temperature, but not the wear rates.
This presentation reviews current and expected developments in the field of laser-induced periodic surface structures (LIPSS, ripples). These surface nanostructures are a universal phenomenon and can be generated on almost any material by irradiation with intense linearly polarized radiation. LIPSS are formed in a “self-ordered” way and are often accompanying laser material processing applications. The structures can be produced in a single-step process and enable surface functionalization through the adaption of optical, mechanical and chemical surface properties. Their spatial periods typically range from several micrometers down to less than 100 nanometers, exhibiting a clear correlation with the polarization direction of the laser radiation used. Various types of LIPSS have been classified, relevant control parameters were identified, and material specific formation mechanisms are analyzed for different types of inorganic solids, i.e., metals, semiconductors, and dielectrics, through time-resolved optical experiments and theoretical simulations. Special attention will be paid to a comparison of the currently available formation theories for LIPSS with a discussion of their respective strengths and weaknesses. Currrently explored applications featuring surface functionalization in the fields of optics, surface wetting, medicine, and tribology will be discussed.
Ultrashort laser pulse micromachining features a high precision. By increasing the repetition rate of the applied laser to several 100 kHz, laser processing becomes quick and cost-effective and make this method attractive for industrial applications. Upon exceeding a critical laser intensity, hard X-ray radiation is generated as a side effect. Even if the emitted X-ray dose per pulse is low, the accumulated X-ray dose becomes significant for high-repetition-rate laser systems so that radiation safety must be considered.
Laser-induced periodic surface structures (LIPSS, ripples) are a universal phenomenon that can be observed on almost any material after the irradiation by linearly polarized laser beams, particularly when using ultrashort laser pulses with durations in the femtosecond to picosecond range. During the past years significantly increasing industrial and research activities have been reported in the field of LIPSS, since their generation in a single-step process provides a simple way of nanostructuring and surface functionalization towards the control of optical, mechanical, biological, or chemical surface properties. In this contribution the mechanisms of formation and current trends and applications of LIPSS are reviewed, including the colorization of technical surfaces, the control of surface wetting properties, the mimicry of the natural texture of animals, the tailoring of surface colonization by bacterial biofilms, the advancement of leadless medical pacemakers, and the improvement of the tribological performance of nanostructured metal surfaces.
This presentation reviews the current state in the field of Laser-induced Periodic Surface Structures (LIPSS). These surface nanostructures are a universal phenomenon and can be generated on almost any material by irradiation with intense linearly polarized laser radiation. LIPSS are formed in a “self-ordered” way and are often accompanying material processing applications. They can be produced following a single-step process and enable surface functionalization through the adaption of optical, mechanical and chemical surface properties. Their structural sizes typically range from several micrometers down to less than 100 nanometers exhibiting a clear correlation with the polarization direction of the laser radiation. Various types of surface structures are classified, relevant control parameters are identified, and their material specific formation mechanisms are analyzed for different types of inorganic solids, i.e., metals, semiconductors, and dielectrics, through time-resolved optical experiments and theoretical simulations. Finally, technological applications featuring surface functionalization in the fields of optics, fluidics, medicine, and tribology are discussed.
Chemical effects during the formation of femtosecond laser-induced periodic surface structures
(2019)
The processing of laser-induced periodic surface structures (LIPSS, ripples) on metals and semiconductors in ambient air is usually accompanied by superficial oxidation effects – a fact that is widely neglected in the current literature. In this contribution, chemical, structural, and mechanical alterations in the formation of femtosecond LIPSS are characterized by a variety of surface analytical techniques, including energy dispersive X-ray analyses (EDX), X-ray photoelectron spectroscopy (XPS), micro Raman spectroscopy (µ-RS), and depth-profiling Auger electron microscopy (AEM). Alternative routes of electrochemical and thermal oxidation allow to qualify the relevance of superficial oxidation effects on the tribological performance in oil lubricated reciprocating sliding tribological tests (RSTT). It is revealed that the fs-laser processing of near-wavelength sized LIPSS on metals leads to the formation of a few hundreds of nanometers thick graded oxide layers, consisting mainly of amorphous oxides. Regardless of reduced hardness and limited thickness, this nanostructured surface layer efficiently prevents a direct metal-to-metal contact in the RSTT and may also act as an anchor layer for specific wear-reducing additives contained in the used engine oil.
This presentation reviews the current state in the field of Laser-induced Periodic Surface Structures (LIPSS). These surface nanostructures are a universal phenomenon and can be generated on almost any material by irradiation with intense linearly polarized radiation. LIPSS are formed in a “self-ordered” way and are often accompanying material processing applications. They can be produced in a single-step process and enable surface functionalization through the adaption of optical, mechanical and chemical surface properties. Their structural sizes typically range from several micrometers down to less than 100 nanometers and show a clear correlation with the polarization direction of the laser radiation. Various types of surface structures are classified, relevant control parameters are identified, and their material specific formation mechanisms are analyzed for different types of inorganic solids, i.e., metals, semiconductors, and dielectrics, through time-resolved optical experiments and theoretical simulations. Finally, technological applications featuring surface functionalization in the fields of optics, fluidics, medicine, and tribology are discussed.
Laser-induced periodic surface structures: from nanoscaled light localization to applications
(2019)
In this contribution the current state in the field of Laser-Induced Periodic Surface Structures (LIPSS) is reviewed. This includes the mechanisms of formation and current applications, particularly the colorization of technical surfaces, the control of surface wetting properties, the tailoring of surface colonization by bacterial biofilms, and the improvement of the tribological performance of nanostructured metal surfaces.
Laser-induced periodic surface structures (LIPSS, ripples) are a universal phenomenon that can be observed on almost any material after the irradiation by linearly polarized laser beams, particularly when using ultrashort laser pulses with durations in the femtosecond to picosecond range.
During the past few years significantly increasing research activities have been reported in the field of LIPSS, since their generation in a single-step process provides a simple way of nanostructuring and surface functionalization towards the control of optical, mechanical, biological, or chemical surface properties. In this contribution the mechanisms of formation and current applications of LIPSS are reviewed, including the colorization of technical surfaces, the control of surface wetting properties, the mimicry of the natural texture of animal integuments, the tailoring of surface colonization by bacterial biofilms, the advancement of medical pacemakers, and the improvement of the tribological performance of nanostructured metal surfaces.
Femtosecond laser-induced periodic surface structures: from light localization to applications
(2019)
This presentation reviews the current state in the field of Laser-induced Periodic Surface Structures (LIPSS). These surface nanostructures are a universal phenomenon and can be generated on almost any material by irradiation with intense linearly polarized laser radiation. LIPSS are formed in a “self-ordered” way and are often accompanying material processing applications. They can be produced following a single-step process and enable surface functionalization through the adaption of optical, mechanical and chemical surface properties. Their structural sizes typically range from several micrometers down to less than 100 nanometers exhibiting a clear correlation with the polarization direction of the laser radiation. Various types of surface structures are classified, relevant control parameters are identified, and their material specific formation mechanisms are analyzed for different types of inorganic solids, i.e., metals, semiconductors, and dielectrics, through time-resolved optical experiments and theoretical simulations. Finally, technological applications featuring surface functionalization in the fields of optics, fluidics, medicine, and tribology are discussed.
3D images such as those produces by X-ray tomography can provide a wealth of information on the internal structure of materials, but quantification of specific geometrical or topological characteristics linked to some bulk physical property is far from being straightforward. This study focuses on methods to quantify the differences in physical properties as a function of direction, i.e. their anisotropy, and how it can be linked to measures of anisotropy of the internal structure of the material. The auto-correlation function gives a similarity measure in the volume as a function of distance and direction. This is a cross-correlation of the image with itself fast to compute and relatively insensitive to noise. It is why we focus on this method to compare with the physical property of our DPF material. Diesel Particulate Filter (DPF) materials are porous ceramics that; a) can be used at very high temperatures; b) have very good thermal shock resistance; c) are inert; d) can be manufactured with tailored porosity. Their usual way of production consists of the extrusion of a slurry into the desired filter shape, with successive ceramming at high temperature. This process causes anisotropy at both microscopic and macroscopic levels.
Virtual CT acquisition and reconstruction of complex and noisy scanning trajectories in aRTist
(2019)
In modern CT imaging, simulation has become an important tool to minimize cost- and time-intensive measurements. It is increasingly used to optimize techniques for complex applications, to support the preparation of written procedures, and for educational purposes. We extended the CT simulation software ‘aRTist’ with a module to set-up arbitrary trajectories including disturbing influences during the scan. Moreover, such geometric deviations can be compensated by the internal reconstruction tool.
Up until several years ago, tensile and compressive tests have been exclusively carried out as single-sample tests within a tensile, hardness or universal testing machine. The availability of centrifuge technology changed this situation in 2013 in several ways because centrifugal force is used as testing force within a rotational reference frame.
Firstly, multiple-sample strength testing became feasible for both tensile load condi-tions, e.g. determination of composite, bonding or adhesive strength, and compressive load conditions, e.g. hardness, compressibility and compactibility. Secondly, there is no need for a two-sided sample clamping and double-cardanic suspensions as samples are simply inserted using a one-sided sample support. Thirdly, shear forces can be avoided by means of guiding sleeves which steer test stamps acting as mass bodies for either tensile or compressive testing. Fourthly, up to eight samples can be tested under identical conditions within a very short period of time, typically within 15 minutes including sample loading and unloading. Hence, either a reliable statistics (of identical samples) or a ranking (of different samples) can be derived from one test run.
The bench-top test system is described in detail and demonstrated that centrifugal force acts as testing force in an appropriate way because Euler and Coriolis force do not affect the testing results. Examples for both tensile strength testing, i.e. bonding strength of adhesives-bonded joints and adhesive strength of coatings, and compres-sive strength testing, i.e. Vickers-, Brinell- and ball indentation hardness and deter-mination of spring constants, are presented, discussed and compared with conven-tional tests within tensile, hardness or universal testing machines.
At present, a maximum testing force of 6.5 kN can be realized which results at test stamp diameters of 5 mm, 7 mm, and 10 mm in tensile or compressive stress values of 80 MPa, 160 MPa, and 320 MPa. For tensile strength, this is already beyond bonding strength of cold- and warm-curing adhesives. Moreover, centrifuge technology is compliant to standards such as EN 15870, EN ISO 4624, EN ISO 6506/6507 and VDI/VDE 2616. Programmable test cycles allow both short-term stress and log-term fatigue tests. Based on a variety of examples of surface and bonding technology, applications in both fields R&D and QC are presented. Meanwhile, centrifuge technology is also accredited according to DIN EN ISO/IEC 17025.
In this study, the influence of the welding speed and the arc power on the solidification crack formation for partial penetration laser hybrid welded Thick-Walled plates were investigated. Experimentally, a linear correlation between the welding velocity and the crack number was observed. That is by reducing the welding velocity the crack number was reduced.
The reduced welding velocity showed a strong impact on stress, as the model demonstrated a very lower stress amount in comparison to the reference case. The reduction of the welding speed could be a helpful technique to reduce the hot cracking. The wire feed speed showed a very slight influence on the crack formation. That can be returned to the large distance between the critical region for cracking and the arc region.
In this study, the influence of the welding speed, the arc power and the laser focal position on the solidification crack formation for partial penetration laser hybrid welded thick-walled plates were investigated. Experimentally, a direct correlation between the welding speed and the crack number was observed. That is by reducing the welding velocity the crack number was decreased. The focal position shows also a significant influence on the crack number. Since by focusing the laser on the specimen surface, the crack number has been significantly diminished.
The wire feed speed showed a very slight influence on the crack formation. That is due to the large distance between the critical region for cracking and the arc region.
The numerical model shows a high-stress concentration in the weld root for both components (vertical and transversal).
Numerically, the reduced welding speed showed a strong impact on stress, as the model demonstrated a lower stress amount by decreasing the welding speed. The solidification cracking in the weld root is a result of interaction between metallurgical and geometrical and thermomechanical factors.
Against the background of sustainable resource management and efficiency, wood-based materials are currently experiencing a revival and, among others, plywood, Laminated Veneer Lumber and glued laminated timber are becoming increasingly more important in the building sector. Even though these materials are so-called engineered products, the element wood is naturally grown with intrinsic variability in mechanical properties and requires professional handling on-site. Otherwise, load-bearing structures made of wood materials may entail certain risks. Critical situations can, in principle, be avoided by implementing a structural health monitoring system into components or structures made from wood material. The aim is to indicate accumulation of mechanical damage and to eliminate or at least significantly reduce the risk of unexpected failure. Toward this purpose, the failure behavior of several layered wood materials under quasi-static tension was investigated in laboratory-scale experiments by means of acoustic emission (AE) measurement. Based on spectral analysis and pattern recognition, two classes of AE signals are identified for each investigated lay-up that are characterized by either low or high frequency contents in the respective power spectra. AE activity and intensity of both signal classes are analyzed, striving for predictors appropriate for AE monitoring concepts.
At the Stakeholder meeting of the EMPIR project “Multifunctional ultrafast microprobes for on-the-machine measurements”, details about two measurement modes were presented. Force distance curves and contact resonance measurements are compared. The basic principles are explained and exemplary measurements concerning mechanical properties of polymers are shown.
A novel approach for the reconstruction of an equivalent volumetric heat source from a known weld pool shape is proposed. It is based on previously obtained weld pool geometries from a steady-state thermo-fluid dynamics simulation. Hereby the weld pool dimensions are obtained under consideration of the most crucial physical phenomena, such as phase transformations, thermo-capillary convection, natural convection and temperature-dependent material properties. The algorithm provides a time and calibration efficient way for the reproduction of the weld pool shape by local Lamé curves. By adjusting their parameters, the identification of the finite elements located within the weld pool is enabled. The heat input due to the equivalent heat source is assured by replacing the detected nodes’ temperature by the melting temperature.
The model offers variable parameters making it flexible and adaptable for a wide range of workpiece thicknesses and materials and allows for the investigation of transient thermal effects, e.g. the cooling stage of the workpiece. The calculation times remain acceptably short especially when compared to a fully coupled process simulation. The computational results are in good agreement with performed complete-penetration laser beam welding experiments.
Despite of the significant advances in AM process optimization there is still a lack of experimental results and understanding regarding the mechanical behavior and microstructural evolution of AMparts, especially in loading conditions typical for safety-relevant applications e.g. in the aerospace or power engineering. Within the scope of the presented investigations, a characterization of the fatigue behavior of additively manufactured Ti-6Al-4V in the low cycle fatigue regime was carried out in the range of 0.3 to 1.0 % strain amplitude at room temperature, 250°C and 400°C. The Ti-6Al-4V specimens are machined out of lean cylindrical rods, which were fabricated using powder laser metal deposition (LMD) with an improved build-up strategy. The improved strategy incorporates variable track overlap ratios to achieve a constant growth in the shell and core area. The low-cycle-fatigue behavior is described based on cyclic deformation curves and strain-based fatigue life curves. The lifetimes are fitted based on the Manson-Coffin-Basquin relationship. A characterization of the microstructure and the Lack-of-Fusion (LoF)-defect-structure in the as-built state is performed using optical light microscopy and high-resolution computed tomography (CT) respectively. The failure mechanism under loading is described in terms of LoF-defects-evolution and crack growth mechanism based on an interrupted LCF test with selected test parameters. After failure, scanning electron microscopy, digital and optical light microscopy and CT are used to describe the failure mechanisms both in the longitudinal direction and in the cross section of the specimens. The fatigue lives obtained are comparable with results from previous related studies and are shorter than those of traditionally manufactured (wrought) Ti-6Al-4V. In this study new experimental data and understanding of the mechanical behavior under application-relevant loading conditions (high temperature, cyclic plasticity) is gained. Furthermore, a better understanding of the role of LoFdefects and AM-typical microstructural features on the failure mechanism of LMD Ti-6Al-4V is achieved.
Explosion and decomposition limits of flammable and chemically unstable gases were determined experimentally in a dosed autoclave with varying ignition energy up to 1000 J. The ignition source was a lightning arc caused by an exploding wire igniter as described in EN 1839 B .. In case of methane only the upper explosion limit was influenced significantly by the ignition energy, whereas the lower explosion limit was constant. In case of R32 however. it was the lower explosion limit that was influenced significantly by the ignition energy and not the upper explosion limit. A particularly strong dependency from the ignition energy was found for the decomposition limits of the chemically unstable gases in nitrogen.
The weld pool dynamics and shape play a fundamental role in keyhole mode welding. The presented work aims the experimental and numerical investigation of the influence of the weld pool characteristics on the formation of hot cracking. The experimental procedure allows recording the molten pool in the longitudinal section of a butt joint configuration of 15 mm thick structural steel and transparent quartz glass by using a high-speed video camera and two thermal imaging cameras. The observations show that the dimensions of the weld pool vary depending on the depth. The regions close to the surface form a teardrop-shaped weld pool. A bulge-region and its temporal evolution are observed approximately in the middle of the depth of the weld pool, where hot cracking appears. A numerical framework including models for the weld pool dynamics, global temperature field, transient stress state, crystal growth, diffusion and macro-segregation and subroutines for their one-way couplings is developed. The numerically obtained and experimentally observed results are in a good agreement. It is shown that the bulge-region leads to a delay in the solidification behavior, increased temporal tensile stresses and accumulation of impurities in the defect region and hence enhance the probability of hot cracking formation.
The geometrical characteristics of the weld end crater are commonly used for the validation of numerical results in welding simulation. A semi-analytical model calculating the cooling stage of the welding process after the moving energy source is turned off has been developed. A solution for various combinations of heat sources and workpieces has been found. The theoretical limits for the heat transfer of the absorbed energy during cooling in a thin plate and a semi-infinite body were studied. It is shown that after turning off the energy source, an additional melting of the base material in longitudinal direction may occur. The developed technique is applied to complete-penetration keyhole laser beam welding of a 2 mm thick austenitic chromium-nickel 316L steel plate at a welding speed of 20 mm/s and a laser power of 2.3 kW. The results show a theoretical increase of the weld end crater length in comparison to the length of the steady-state weld pool of up to 19 %. A shift of the centre of the end crater, in which the solidification of the liquid metal ends, towards the tail of the end crater relative to the axis of the heat source at the time of its termination, was computed. The speed and the direction of crystallization of the molten material in the weld pool and the end crater were found to be different. A good agreement between the computational results and the welding experiments was achieved.
A numerical framework simulation of the steady-state thermal behaviour in keyhole mode welding has been developed. It is based on the equivalent heat source concept and consists of two parts: computational thermo-fluid dynamics and heat conduction. The solution of the thermo-fluid dynamics problem by the finite element method for a bounded domain results in a weld pool interface geometry being the input data for a subsequent heat conduction problem solved for a workpiece by proposed boundary element method. The main physical phenomena, such as keyhole shape, thermo-capillary and natural convection and temperaturedependent material properties are taken into consideration. The developed technique is applied to complete-penetration keyhole laser beam welding of a 15 mm thick low-alloyed steel plate at a welding speed of 33 mm/s and a laser power of 18 kW. The fluid flow of the molten metal has a strong influence on the weld pool geometry. The thermo-capillary convection is responsible for an increase of the weld pool size near the plate surfaces and a bulge formation near the plate middle plane. The numerical and experimental molten pools, cross-sectional weld dimensions and thermal cycles of the heat affected zone are in close agreement.
According to the results of the experiments carried out, the following points can be concluded:
1. Exposure tests showed that specimens with the addition of SiO2 particles and polyaniline particles exhibit better corrosion resistance than specimens with the addition of only polyaniline particles or binder only.
2. Open circuit potential measurements showed that in the beginning of the experiments, both coatings had an open circuit potential 100 mV higher than carbon steel. Within one day of immersion, the potential of carbon steel increased significantly, indicating the formation of oxide layer. After extended exposure the carbon steel potential sat between PS1 (which had higher potential) and PS2 (which had a lower potential) and all three were in the range –600 mV to –500 mV vs Ag/AgCl.
3. Both coatings PS-1 and PS-2 were degraded with increasing exposure time, shown by the decrease of absolute impedance value at low frequency range after 2, 4, and 6 days exposure.
4. Potentiodynamic test was performed after 3 hours and 6 days exposure, and it was shown that the coating in the initial stage exhibited more passive behavior than the specimens exposed for 6 days.
The project ProMoAM is presented. The goal of the project is to evaluate which NDT techniques or combination of techniques is suited for in-situ quality assurance in additive manufacturing of metals. To this end, also 3d-data fusion and visualization techniques are applied. Additional ex-situ NDT-techniques are used as references for defect detection and quantification. Feasability studies for NDT-techniques that are presently not applicable for in-situ use are performed as well.
The presentation gives a brief overview of the whole project and the different involved NDT-techniques.
For metal-based additive manufacturing, sensors and measuring systems for monitoring of the energy source, the build volume, the melt pool and the component geometry are already commercially available. Further methods of optics, spectroscopy and non-destructive testing are described in the literature as suitable for in-situ application, but there are only a few reports on practical implementations.
Therefore, a new BAM project aims to develop process monitoring methods for the in-situ evaluation of the quality of additively manufactured metal components. In addition to passive and active thermography, this includes optical tomography, optical emission and absorption spectroscopy, eddy current testing, laminography, X-ray backscattering and photoacoustic methods. These methods are used in additive manufacturing systems for selective laser melting, laser metal deposition and wire arc additive manufacturing. To handle the sometimes huge amounts of data, algorithms for efficient preprocessing are developed and characteristics of the in-situ data are extracted and correlated to defects and inhomogeneities, which are determined using reference methods such as computer tomography and metallography. This process monitoring and fusion of data of different measurement techniques should result in a significant reduction of costly and time-consuming, destructive or non-destructive tests after the production of the component and at the same time reduce the production of scrap.
Here, first results of simultaneous measurements of optical emission spectroscopy and thermography during the laser metal deposition process using 316L as building material are presented. Temperature values are extracted from spectroscopic data by fitting of blackbody emission spectra to the experimental data and compared with results from a thermographic camera. Measurements with and without powder flow reveal significant differences between welding at a pristine metal surface and previously melted positions on the build plate, illustrating the significant influence of the partial oxidation of the surface during the first welding process on subsequent welding. The measurement equipment can either be mounted stationary or following the laser path. While first results were obtained in the stationary mode, future applications for online monitoring of the build of whole parts in the mobile mode are planned.
This research was funded by BAM within the focus area Material.