Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2019 (95) (entfernen)
Dokumenttyp
- Vortrag (95)
Referierte Publikation
- nein (95)
Schlagworte
- Surface functionalization (8)
- TED-GC-MS (8)
- Laser-induced periodic surface structures (LIPSS) (6)
- Nanocomposites (6)
- Nanoparticles (6)
- Applications (5)
- Atomic Force Microscopy (AFM) (5)
- Boehmite (5)
- Corrosion (5)
- Femtosecond laser (5)
- MIC (5)
- Rigid amorphous fraction (5)
- Femtosecond laser ablation (4)
- In situ (4)
- Laser-induced periodic surface structures, LIPSS (4)
- Mechanochemistry (4)
- Microplastics (4)
- Mikroplastik (4)
- SAXS (4)
- Traceability (4)
- Analytik (3)
- Electron microscopy (3)
- Harmonisation (3)
- Particle size distribution (3)
- Reference materials (3)
- X-ray scattering (3)
- Acoustic levitation (2)
- Additive Manufacturing (2)
- Additive manufacturing (2)
- BDS (2)
- Biofilmbildung (2)
- CAT-Technologie (2)
- Copolymer (2)
- Corrosion monitoring (2)
- EPMA (2)
- Glass transition (2)
- Haftfestigkeit (2)
- Laser-induced X-ray emission (2)
- Laserschutz (2)
- Materialbearbeitung (2)
- Microstructure (2)
- Monte Carlo (2)
- Nanocharacterisation (2)
- Nanomaterialien (2)
- Nanoparticle (2)
- Nanoplastics (2)
- Nanostructure (2)
- Normung (2)
- Polymers of intrinsic microporosity (2)
- Radiation protection (2)
- Röntgenemission (2)
- Sekundärstrahlung (2)
- Small-angle X-ray scattering (2)
- Synchrotron (2)
- TMDSC (2)
- Thin films (2)
- Ultrakurze Laserpulse (2)
- Ultrashort laser material interaction (2)
- VAMAS (2)
- XRD (2)
- 3d structuring (1)
- AFM (1)
- AFM-IR (1)
- Absorption edge tomography (1)
- Additiv (1)
- Adhäsion (1)
- Adsorbed layer (1)
- Advanced Materials (1)
- Advanced materials (1)
- Alite (1)
- Analytische Zentrifuge (1)
- AuNP (1)
- BAMline (1)
- Beamline (1)
- Bestimmung der Messunsicherheit (1)
- Brechungsindex (1)
- Bundesoberbehörden (1)
- Böhmit (1)
- C3A (1)
- C3S (1)
- Cement (1)
- Centrifugal Adhesion Testing (1)
- Centrifugal Adhesion Testing (CAT) (1)
- Centrifugal Force (1)
- Certified reference materials (1)
- Compressive Stress (1)
- Coupled corrosive and mechanial load (1)
- Coupled corrosive/mechanical load (1)
- Crosslinking (1)
- Curing (1)
- Curved surfaces (1)
- Delayed addition (1)
- Dosimetry (1)
- Dünne Schichten (1)
- EMPIR (1)
- Early hydration (1)
- Electromagnetic radiation (1)
- Electromagnetic scattering (1)
- Electrospun fibers (1)
- Ellipsometric porosimetry (1)
- Ellipsometrie (1)
- Ellipsometry (1)
- Energiedissipation im Kontakt (1)
- Epoxy (1)
- Epoxy-Anhydrid Duroplast (1)
- Fast scanning calorimeter (1)
- Fast scanning calorimetry (1)
- Filters (1)
- Flash DSC (1)
- Forschungsstrategie (1)
- Geant4 (1)
- Grenzfläche als Material (1)
- Hamonisierung (1)
- IIT (1)
- ISO (1)
- ISO 14577 (1)
- ImAFM (1)
- Instrumented Indentation Testing (1)
- Instrumentierte Eindringprüfung (1)
- Instrumentierte Eindringprüfung (IIT) (1)
- Inter-laboratory comparison (1)
- Interfaces (1)
- Introduction (1)
- Kleb- und Haftfestigkeit (1)
- Klebfestigkeit (1)
- Korrosion (1)
- Korrosionsüberwachung (1)
- Kunststoff (1)
- LC / MALDI-TOF-MS coupling (1)
- LC x ESI-TOF-MS (1)
- LC-MS (1)
- LCCC (1)
- LLG (1)
- Leichtbau (1)
- Levitation (1)
- Liquid Crystals (1)
- Localised corrosion (1)
- MCS (1)
- MOF (1)
- Magnetic nanoparticle (1)
- Magnetocoloric (1)
- Mass spectrometry (1)
- Mass spectrometry of polymers (1)
- Material Science (1)
- Material characterization (1)
- Materials Science (1)
- Materials science (1)
- Mehrprobenprüfung (1)
- Mesoporous iridium-titanium mixed oxides (1)
- Mesoporous mixed metal oxide films (1)
- Messtechnik (1)
- Messunsicherheit (1)
- Metal reducing bacteria (1)
- Metal-organic-frameworks (1)
- Metal–organic frameworks (1)
- Microanalysis (1)
- Microbeam analysis (1)
- Microbial (1)
- Microbiologically influenced corrosion (1)
- Microdosimetry (1)
- Micromagnetism (1)
- Mikroskaliert (1)
- Modelling (1)
- Molecular masses (1)
- Monte-Carlo simulation (1)
- Mueller-Matrix Ellipsometry (1)
- Mueller-Matrix imaging ellipsometry (1)
- Multiphoton laser structuring (1)
- Müller-Matrix-Ellipsometrie (1)
- Nano (1)
- Nano particle (1)
- Nano screening (1)
- NanoSIMS (1)
- Nanocomposite (1)
- Nanokomposit (1)
- Nanorods (1)
- Nanoscale (1)
- Nanoskaliert (1)
- Nanostructure quantification (1)
- Nanotechnologie (1)
- Neuartige Materialien (1)
- Niedrigenergie-Polymeren (1)
- Non-destructiv testing (1)
- Non-destructive testing (1)
- Non-destructuve testing (1)
- Non-spherical shape (1)
- OOMMF (1)
- Oberflächenanalytik (1)
- Oberflächengeometrie (1)
- Oberflächenmesstechnik (1)
- Oberflächenpotential (1)
- Oberflächensteifigkeit (1)
- Oberflächentechnik (1)
- Oxidation (1)
- Oxygen evolution reaction (1)
- PC characterisation (1)
- Particle size (1)
- Plastikstrategie (1)
- Polycarboxylate ether (PCE) (1)
- Polymer (1)
- Polymer aging (1)
- Polymer blends (1)
- Polymer nanocomposites (1)
- Polymers (1)
- Polyurethane (1)
- Practical aspects (1)
- Pre-standardisation (1)
- Protein (1)
- Prüftechnik (1)
- Qualitätssicherung (1)
- Radioactive NP (1)
- Reconstructed ion chromatograms (1)
- Recycling (1)
- Recycling-by-design (1)
- Rietveld (1)
- Risstrajektorie (1)
- SEC (1)
- SEM/EDS/STRATAGem (1)
- SKPM (1)
- Silane (1)
- Simulation (1)
- Size distribution (1)
- Software (1)
- Spectroscopic Imaging (1)
- Spectroscopic ellipsometry (1)
- Spectroskopic Imaging (1)
- Spektrale Ellipsometrie (SE) (1)
- Stand der Normung (1)
- Standardisation (1)
- Structural anomalies (1)
- Structural inhomogenities (1)
- Surface modification (1)
- Synchrotron radiation (1)
- Synchrotron tomography (1)
- Tara Mediterranee (1)
- Tensile Stress (1)
- Thermal degradation (1)
- Thermogravimetry (1)
- Thin polymer films (1)
- Thin polymeric films (1)
- Tribology (1)
- UV degradation (1)
- Ultrafast scattering (1)
- VSSA (1)
- Verbundfestigkeit (1)
- Weißlichtinterferenzmikroskopie (WLIM, 3D) (1)
- X-Ray Imaging (1)
- X-Ray imaging (1)
- X-ray and electron diffraction (1)
- X-ray imaging (1)
- X-ray spectroscopic techniques (1)
- X-ray spectroscopy (1)
- XANES (1)
- attraktive Wechelwirkung (1)
- dielectric spectroscopy (1)
- gas separation membranes (1)
- mechanical properties (1)
- molecular mobility (1)
- nanoindentation (1)
- performance test (1)
- polymers (1)
- polymers of intrinsic microporosity (1)
- polynorbornenes (1)
- product specification (1)
- uncertainty (1)
Organisationseinheit der BAM
- 6 Materialchemie (95) (entfernen)
Eingeladener Vortrag
- nein (95) (entfernen)
Formation of interphases between inorganic nanofillers and thermoplastic matrices are usually correlated to short-range interactions which does not exceed more than tens of nanometers away from the surface of the filler. Nevertheless, in nanocomposites with thermosetting matrices, the effect of nanofillers on the properties of the matrix is not limited to the immediate vicinities, but a long-range property alteration of the bulk polymer may be observed. The interaction between nanofillers and the polymer can disturb the curing reaction and alters the chemical, physical and mechanical properties of the polymer network in the matrix phase. In our studies, we aim to investigate short and long-range interphases of a nanocomposite system consisting of a thermosetting matrix (DGEBA) filled with an inorganic nanoparticle (boehmite). For this purpose, a combination of atomic force microscopy (AFM)-based approaches is implemented. Scanning kelvin probe microscopy (SKPM) was used to map the compositional contrast and the interphase with different electrical properties than the bulk. The mechanical properties of the interphase were probed by high resolution intermodulation AFM. (ImAFM). Furthermore, infrared spectroscopy AFM (AFM-IR) is used to investigate the chemical structure of the matrix at different distances from the nanoparticle. SKPM and (AFM-IR) measurements both show a long-range (to 10 µm) effect of boehmite on the chemical structure and surface potential of the bulk epoxy, respectively, whereas ImAFM force measurements reveals a short-range mechanical interphase between the filler and the matrix. The AFM-IR demonstrated the existence of unreacted anhydride hardener at the interphase. This indicates the preferential absorption of anhydride on the surface of boehmite. The consequence of such a selective interaction between the inorganic filler and the epoxy components is disturbance of the epoxy-hardener stoichiometric ratio, the curing mechanism. and the alteration of bulk properties of the matrix.
In service, most materials are operated under simultaneous corrosive and mechanical load and there are very few methods capable for testing material degradation under these conditions, especially when it comes to high resolution analysis. For this purpose, in this work, a tensile module capable of uniaxial stretching and compression with up to 5 kN force was integrated into an AFM stage. The elimination of the need for sample unmounting and remounting and the resulting possibility of keeping the sample under constant mechanical load during AFM measurements not only enables a precise positioning of the area of interest but also allows for the analysis of processes in the elastic deformation regime.
This methodology was demonstrated for two case studies. Scanning Kelvin Probe Force Microscopy (SKPFM) was used as the main tool to characterize the deformation behavior. Moreover, a flexible electrochemical measurement cell was used to enable electrochemical analysis by means of electrochemical impedance spectroscopy (EIS) and Linear Sweep Voltammetry (LSV) during AFM measurements at different levels of strain. The in situ AFM results are complemented by microstructure analysis by means of electron backscatter diffraction (EBSD).
In the first case study, the deformation induced delamination of a thin organic coating on AA2024 T3 aluminium alloy was investigated as a function of alloy surface treatment. The formation of cracks in the insulating passive film enabled an early detection of deformation processes by means of SKPFM. The second case study focused on the comparison of corrosion and deformation behavior of conventional and additively manufactured 316 stainless steels. In comparison to the conventional 316 stainless steel, the effect of processing was clearly detectable on the additively manufactured material as zones of inhomogeneous potential, which also affected the initiation of local corrosion processes. The contribution will provide detailed information on the new AFM setup and summarize our results from both case studies.
The performance of functional coatings and adhesively joined hybrid components relies strongly on the stability of the polymer-metal interface. With the increasing utilization of multi-material structures in the automotive and aerospace industry, it is of great scientific and technical interest to understand the processes leading to interface degradation and to develop novel strategies to increase corrosion and delamination resistance.
The aim of this project is to develop thin epoxy-based films and their carbon nanofiller loaded composites on aluminium alloy AA2024-T3 as a model system and to investigate their interfacial stability under corrosive and coupled corrosive-mechanical load. Spin coating was used for the layer-by-layer deposition of poly[(o-cresyl glycidyl ether)-co-formaldehyde] and poly-(ethylenimine) bi-layers. Atomic force microscopy (AFM) results indicate a very homogeneous and dense film with low surface roughness. Carbon nanofillers were introduced either by mixing into the coating components or in between individual layers to control the separation between the carbon nanofillers and alloy surface. The film chemistry and barrier properties were characterized by means of spectroscopic and electrochemical methods, respectively. The degradation and delamination behavior of the epoxy-based films was characterized by means of in situ AFM corrosion experiments. The quantitative imaging (QI) mode allowed the observation of hydrogen-generation induced blister formation during exposure to corrosive electrolyte and how the local corrosion processes evolved with exposure time. Complementary energy dispersive X-ray spectroscopy (EDX) analysis was performed to correlate the corrosion behavior with the different intermetallic particle chemistries and distributions. The presentation will summarize our results on the effect of interface chemistry and carbon nanofiller – alloy separation on the initiation of local corrosion processes on thin film covered AA2024-T3 aluminium alloys.
The presentation summarizes our recent results on the coupled electrochemical methods for high resolution corrosion studies. The combination of Scanning Electrochemical Microscopy (SECM) and multielectrode (MMA) based real-time corrosion monitoring was presented as a new method for achieving high time resolution in local electrochemical analysis. Correlative imaging by means of Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) was demonstrated as a tool for the investigation of local corrosion processes initiated by the intermetallic particles (IMPs) on AA2024-T3 aluminium alloy.
Using magnetic materials for energy conversion as an example, this lecture shows how X-ray tomography investigations can contribute to structure elucidation in composites and solid samples. The components are tested non-destructively in order to characterize cracks, pores and other defects and their influence on the functional properties three-dimensionally and in good time in the life cycle of the material. If you combine microtomography with other methods of magnetic material characterization, you can make unique statements about the structure and the functional properties.
Using magnetic materials for energy conversion as an example, this lecture shows how X-ray tomography investigations can contribute to structure elucidation in composites and solid samples. The components are tested non-destructively in order to characterize cracks, pores and other defects and their influence on the functional properties three-dimensionally and in good time in the life cycle of the material. If you combine microtomography with other methods of magnetic material characterization, you can make unique statements about the structure and the functional properties.
Functional materials for energy conversion are important technology drivers needed for the implementation of low carbon energy. Therefore, researchers commonly focus on improving the intrinsic properties of a functional material. However, for applications, the extrinsic properties are at least as important as the intrinsic ones. Consequently, it is important to investigate and understand the external and internal structure of semi-finished products and especially defect dependent properties. The extrinsic properties may change during application and the life cycle of the material as well as through processing and molding steps.
Our studies show how X-ray tomographic (XCT) investigations can contribute to structure investigations in composites and massive samples using the example of magnetic materials for energy conversion. The components are tested non-destructively in 3D in order to localize and characterize cracks, pores, inclusions as well as other defects and their influence on the functional properties and also “in-time” during the life cycle of the material. Exsitu and in-situ experiments performed with non-destructive XCT are predestinated to follow damaging mechanisms of materials under certain load conditions, atmospheres or liquids, e.g. went through several working cycles of a functional material. By combining microtomography with other methods of magnetic and classical material characterization, unique statements about the structure and the functional properties can be made.
From the applications point of view, sometimes complex, three-dimensional geometries are needed to fully exploit the functional properties of the materials, e.g. to ensure a high surface area for heat exchange. Since many functional materials are brittle and difficult to form, shaping is often a big challenge. In principle, additive manufacturing processes offer the possibility to produce complex, porous components from poorly formable alloys.
If all stages of additive manufacturing are accompanied by X-ray tomographic imaging, the process of finding the optimal parameters for material processing can be significantly accelerated.
Based on the quality control of the initial powder material used and also investigations of the shape and arrangement of defects within the molten structure and their relationship with the melting path scanning strategy, Xray tomography has proven to be an ideal tool for additive manufacturing, even for functional materials. Overall, tomographic methods are important tools for the development of functional materials to application maturity.
It was found for inorganic/polymer nanocomposites that a so-called Rigid Amorphous Phase (RAF) is formed in the interfacial region by adsorption of polymer segments onto the nanoparticles. The segmental dynamics of RAF is expected to be altered, as compared to the pure matrix, which might percolate into the entire system, affecting the overall nanocomposite properties. Here, the structure and molecular mobility of epoxy-based PNCs with different nanofillers (layered double hydroxide and boehmite) was studied by a combination of calorimetric and X-Ray scattering techniques. Temperature modulated DSC (TMDSC) showed that depending on the nanofiller, RAF can reach up to 40 wt % of the system or, on the contrary, the overall mobility of the matrix might increase due to the presence of particles. Such contrasting results, including the high amount of RAF, which was never shown before for epoxy-based PNCs, emphasize the importance of interfaces. Additionally, glass transition and glassy dynamics were investigated by a novel technique, Flash DSC (heating rates up to 10 kK/s) employed for the first time to a thermosetting system and electrospun fibers, which did not result in their degradation. It was used to study both the vitrification kinetics and glassy dynamics of the PNCs, for instance further confirming the presence of RAF and its impact on the overall material properties.
Das Fügeverfahren Kleben bietet viele Vorteile, wie z.B. das Verbinden unterschiedlicher Materialklassen, geringe thermische Belastung (und damit ggf. verbundene Strukturveränderung/-schwächung) der Fügeteile und eine Lastverteilung über den gesamten Fügebereich. Die Auswahl an verfügbaren Klebstoffen und Vorbehandlungsoptionen sind dabei - wie die Applikationen auch - vielfältig. Es werden vier Applikationsbeispiele zu Referenzklebverbunden aus Edelstahl, zur Plasmaaktivierung von Niedrigenergie-Polymeren, zur Bestimmung der Haftfestigkeit von Lackierungen auf GFK und zur Wirkung von Primern vorgestellt. Einige Polymere weisen z.B. Eigenschaften auf, die eine Herstellung von festen und dauerhaft beanspruchbaren Kleb-verbindungen erschweren. Im Allgemeinen geht dies mit geringen Oberflächenenergien einher. Mittels Oberflächenvorbehandlung, z.B. durch Plasmafeinreinigung bzw. Plasmaaktivierung, können die Grenzflächen solcher Polymere - bezogen auf die Eignung als Fügeteile (Klebfestigkeit) oder als Substrat (Haftfestigkeit) – optimiert bzw. die Oberflächenenergie erhöht werden. Schnelle, zuverlässige und statistisch abgesicherte Prüfverfahren zur Ermittlung von Verbund-eigenschaften sind dabei unverzichtbar.
Challenges in Traceable Size Measurement of Non-Spherical, Non-Monodisperse Nanoparticles - nPSize
(2019)
Size measurement of nanoparticles (NP) becomes a challenging analytical problem when non-spherical shapes must be traceably measured. However, most industrial NPs have irregular shapes and broad size distribution making it often more complex to follow European regulatory to identify a material as a nanomaterial according to which accurate measurement of the smallest dimension and its size Distribution is necessary.
The European research project nPSize - Improved traceability chain of nanoparticle size measurements aims to fill this gap by developing potential non-spherical reference nanoparticles, measurement procedures and physical modelling to improve the traceability chain, comparability and compatibility for NP size measurements between different methods. Therefore, new model NP with well-controlled shape has been synthesized and are supposed to be systematically characterized using the traceable methods scanning/transmission electron microscopy, atomic force microscopy and small angle X-ray scattering.
Following NP candidates are under investigation with respect to their homogeneity and stability: (i) titania nanoplatelets (10-15 nm thickness x 50-100 nm lateral), (ii) titania bipyramides (~60 nm length x 40 nm width), (iii) titania acicular particles (100 nm length x 15-20 nm width; aspect ratio 5.5/6), (iv) gold nanorods (~10 nm width x 30 nm length), and (v) gold nanocubes (~55 nm x 55 nm x 55 nm). In addition, sample preparation procedures as well as measurement analysis procedures with evaluation of appropriate measurands and descriptors for each material class and method are being developed to support standardization. To underpin the traceability of the size measurement of nonspherical NP, physical modelling of the signals in e.g. electron microscopy techniques will be used and in combination, the implementation of machine learning is aimed to facilitate measurement Analysis procedures, especially regarding the accurate thresholding/segmentation of the NPs.zeige mehr