Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2023 (215) (entfernen)
Dokumenttyp
- Vortrag (113)
- Zeitschriftenartikel (50)
- Beitrag zu einem Tagungsband (36)
- Posterpräsentation (7)
- Forschungsdatensatz (3)
- Dissertation (2)
- Forschungsbericht (2)
- Tagungsband (Herausgeberschaft für den kompletten Band) (1)
- Sonstiges (1)
Schlagworte
- Additive manufacturing (22)
- Laser beam welding (21)
- Additive Fertigung (19)
- Additive Manufacturing (13)
- Hochfester Stahl (13)
- Wasserstoff (13)
- Ultraschallunterstütztes Fräsen (12)
- Eigenspannungen (10)
- Hydrogen (10)
- Oberflächenintegrität (10)
- TIG welding (10)
- LIBS (9)
- Numerical modeling (9)
- Schweißen (9)
- Welding (9)
- Mechanical properties (8)
- Microstructure (8)
- Residual stress (8)
- In situ measurement (7)
- Laser powder bed fusion (7)
- Numerical simulation (6)
- Werkzeugverschleiß (6)
- Cyclic R-curve (5)
- Deep penetration laser beam welding (5)
- Duplex stainless steel (5)
- Fatigue (5)
- Legierungsmodifikation (5)
- Pipeline (5)
- Studie (5)
- Submerged arc welding (5)
- Ultrasonic-assisted milling (5)
- WRC 1992 diagram (5)
- AISI 316L (4)
- Digitalisation (4)
- Elastic modulus (4)
- Electromagnetic backing (4)
- Forschung (4)
- Friction stir welding (4)
- Fügetechnik (4)
- Grain refinement (4)
- Heat accumulation (4)
- High-entropy alloy (4)
- Hydrogen assisted cracking (4)
- ISO 3690 (4)
- Laser Powder Bed Fusion (4)
- Laser hybrid welding (4)
- Microstructure characterization (4)
- Multi-principal element alloys (4)
- Pipelines (4)
- Reparatur (4)
- Shear modulus (4)
- Surface integrity (4)
- Thermography (4)
- Tool wear (4)
- Varestraint-Test (4)
- Young's modulus (4)
- Zerspankräfte (4)
- Bruchmechanik (3)
- Charpy impact toughness (3)
- Cold cracking (3)
- Component test (3)
- Crystal branch development (3)
- DED-Arc (3)
- Digital image correlation (3)
- Dissimilar metal weld (DMW) joint (3)
- Eisenaluminid (3)
- Electron backscattered diffraction (3)
- Fracture Mechanics (3)
- Hybrid repair (3)
- Inconel 718 (3)
- Keyhole collapse (3)
- Laser energy distribution (3)
- Magnetic field (3)
- Mechanical Engineering (3)
- Mechanics of Materials (3)
- Oscillating vapor plume (3)
- PBF-LB/M (3)
- Periodic solidification pattern (3)
- Position detection (3)
- Quality Assurance (3)
- Ray tracing (3)
- Research (3)
- Solidification cracking (3)
- Thick-plate welding (3)
- (U)HMWPE (2)
- 100Cr6 (2)
- AM (2)
- Ageing (2)
- AlSi10Mg (2)
- Alloy 36 (2)
- Bauteilauslegung (2)
- Build direction (2)
- Calibration free (2)
- Carrier gas hot extraction (2)
- Chunky graphite (2)
- Columnar crystal growth (2)
- Computed Tomography (2)
- Crack (2)
- Creep (2)
- Creep-resistant steel (2)
- Cutting tool (2)
- DED (2)
- DED-EB (2)
- DED-arc (2)
- Debye-Waller-Faktor (2)
- Diffraction (2)
- Digitalisierung (2)
- Directed Enery Deposition (2)
- Dissimilar metal weld (2)
- Duplex Stainless Steel (2)
- Dynamische Beanspruchung (2)
- Fatigue crack propagation (2)
- Fatigue limit (2)
- Finite element analysis (2)
- Fracture toughness (2)
- Friction (2)
- General Materials Science (2)
- Gusseisen mit Kugelgraphit (2)
- Heat treatment (2)
- Heat treatments (2)
- Heißrisse (2)
- High strength steel (2)
- High-pressure (2)
- High-resolution camera (2)
- High-strength steel (2)
- High-strength steels (2)
- Hohlzugprobe (2)
- Hybrid components (2)
- In situ monitoring (2)
- Infrared thermography (2)
- Ionic liquid (2)
- Irradiation (2)
- Kaltrisssicherheit (2)
- Keyhole dynamics (2)
- Keyhole porosity (2)
- LIPSS (2)
- Laboratory specimens (2)
- Laser energy absorption (2)
- Laser metal deposition (2)
- Laser welding (2)
- Life Cycle Assessment (2)
- Lubrication (2)
- MAG-Schweißen (2)
- Master Curve-Konzept (2)
- Molten pool (2)
- Niobium carbide (2)
- Offshore (2)
- Oscillating magnetic field (2)
- PAG (2)
- PBF-LB/M/316L (2)
- PBF/LB-M (2)
- Porosity (2)
- Process parameter optimization (2)
- Qualitätsinfrastruktur (2)
- Quantification (2)
- Recognition (2)
- Repair Welding (2)
- Repair-welding (2)
- Representative specimens (2)
- Residual Stress (2)
- Residual stresses (2)
- SHPB (2)
- Short crack (2)
- Simulation (2)
- Steel (2)
- Stress relief cracking (2)
- Structure (2)
- Tensile performance (2)
- Tensile properties (2)
- Thermal cycles (2)
- Thermal history (2)
- Ti-6Al-4V (2)
- TiAl64V (2)
- Ultrasonic assisted milling (2)
- WAXD (2)
- Wasserstofftechnologien (2)
- Wear (2)
- Weld pool dynamics (2)
- Widerstandspunktschweißen (2)
- 3D Scanning (1)
- AGIL (1)
- AHSS (1)
- Accoustic emission (1)
- Additive manufacturing (AM) (1)
- Adiabatic shear bands (1)
- Advanced high strength steels (1)
- Aging (1)
- Al/Mg alloys (1)
- Al/Ti dissimilar joints (1)
- Alite (1)
- Alloy modification (1)
- Aluminum alloys (1)
- Aluminum bronze (1)
- Analytical calculation (1)
- Analytical model (1)
- Analytical solution (1)
- Anlagenbau (1)
- Arc welding (1)
- Artificial Intelligence (1)
- Auftragschweißen (1)
- Austenitic Stainless Steel (1)
- Austenitischer Rostfreier Stahl (1)
- Bainitischer Schmiedestahl (1)
- Bauteilversuch (1)
- Betriebsfestigkeit (1)
- Beugung (1)
- Biotische/abiotische Faktoren (1)
- Bragg-edge neutron 2D imaging (BENI) (1)
- Bulge formation (1)
- Burst (1)
- Catalysis (1)
- Charpy Impact Test (1)
- Charpy Transition Curve (1)
- Chunky-Graphit (1)
- Clinker substitute (1)
- Codes and standards (1)
- Cold Spray (1)
- Cold cracking and welding (1)
- Cold cracking safety (1)
- Component Assessment (1)
- Component assessment (1)
- Component-like test (1)
- Composites (1)
- Computer Aided Manufacturing (1)
- Condensed Matter Physics (1)
- Convolutional neural network (1)
- Convolutional neural networks (CNN) (1)
- Crack closure (1)
- Crack propagation (1)
- Cryogenic temperature (1)
- Crystallographic texture (1)
- Crystallographic texture control (1)
- CuSn1 (1)
- DED-LB (1)
- Data Integrity (1)
- Database (1)
- Dataspace (1)
- Dduplex stainless steel (1)
- Deep penetration (1)
- Defekte (1)
- Diffusion (1)
- Digital Image Correlation (DIC) (1)
- Digital Twin (1)
- Digital image correlation (DIC) (1)
- Digitale Bildkorrelation (DIC) (1)
- Digitale Qualitätssicherung (1)
- Dispersive XAS (1)
- Dissimilar friction stir welding (1)
- Ductile Cast Iron (1)
- Ductile cast iron (1)
- Duktiles Gusseisen (1)
- Duplex stainless steels (1)
- Duplex steels (1)
- Dynamic Fracture Toughness (1)
- Dynamic fracture toughness (1)
- EA4T railway axle steel (1)
- EBAM (1)
- Einflussfaktoren auf Rissfortschrittsdaten (1)
- Electron backscatter diffraction (EBSD) (1)
- Electron beam welding (1)
- Electron microscopy (1)
- Element transport (1)
- Erneuerbare Energien (1)
- Evaporation (1)
- FGM (1)
- FSW (1)
- Fahrrad (1)
- Failure Assessment Diagram (1)
- Fatigue Crack Growth (1)
- Fatigue Strength (1)
- Fatigue crack growth (1)
- Fatigue threshold (1)
- Ferngasleitung (1)
- Ferritic spheroidal (1)
- Ferritic spheroidal graphite cast iron (1)
- Filler wire mixing (1)
- Finish milling (1)
- Finite Element Analysis (1)
- Flange width (1)
- Flaw assessment procedures (1)
- Flaw detection (1)
- Flaw interaction (1)
- Flüssigmetallinduzierte Rissbildung (1)
- Fracture (1)
- Fracture mechanics (1)
- Fraktographie (1)
- Frequency domain (1)
- Funktionally Graded Material (1)
- Fusion welding (1)
- Fügequalität (1)
- General analytical solutions (1)
- Global stability criterion (1)
- Gradient-enhanced damage (1)
- Graphite cast iron (1)
- Graphitentartung (1)
- Gusseisen mit Kugelgraphit GJS (1)
- H2-Abbau (1)
- H2Safety@BAM (1)
- Harmonisation (1)
- Haynes 282 (1)
- Heat Treatment (1)
- Heat control (1)
- Heat generation (1)
- Heating rate (1)
- High strength AlMgSi aluminium alloys (1)
- High strength fine grained structural steels (1)
- High temperature alloys (1)
- High-power laser (1)
- High-strength (1)
- High-strength Steels (1)
- High-strength filler metals (1)
- High-strength steel filler metal (1)
- Hochdruck (1)
- Hochentropielegierung (1)
- Hochentropiewerkstoff (1)
- Hollow tensile specimen (1)
- Hybrid part (1)
- Hydraulic reactivity (1)
- Hydrogen degradation (1)
- Hydrogen diffusion (1)
- Hydrogen trapping (1)
- Höherfeste Feinkornbaustähle (1)
- IBESS Approach (1)
- IBESS model for short cracks (1)
- IN 718 (1)
- IN718 (1)
- IN718 PBF-LB/M (1)
- Image processing (1)
- Imperfektion (1)
- In situ (1)
- In-service (1)
- Industrial and Manufacturing Engineering (1)
- Infractstructure (1)
- Iron aluminides (1)
- Joining (1)
- KI (1)
- Kaltriss und Schweißen (1)
- Kaltrissbildung (1)
- Kitagawa-Takahashi (K-T) diagram (1)
- Kontamination von H2 (1)
- Künstliche Intelligenz (1)
- Künstliche Neuronale Netze (1)
- Lamé curves (1)
- Laser Powder Bed Fusion (PBF-LB/M, L-PBF) (1)
- Laser-Pulver-Auftragschweißen (1)
- Laser-based powder bed fusion of metal (PBF-LB/M) (1)
- Lattice structure (1)
- Lebensdauer (1)
- Liquid Metal Embrittlement (1)
- Liquid metal embrittlement (1)
- Local Weld Geometry (1)
- MAG welding (1)
- MIC (1)
- Machine learning (1)
- Machine vision (1)
- Magnetohydrodynamics (1)
- Master Curve (1)
- Master Curve Method (1)
- MatCom (1)
- Materialprüfung (1)
- Mathematical modeling (1)
- Measurement (1)
- Mechanische Eigenschaften (1)
- Melt pool dinamics (1)
- Melt-pool-monitoring (1)
- Messung (1)
- Metal additive manufacturing (MAM) (1)
- Metallschutzgasschweißen (1)
- Metals (1)
- Metals and Alloys (1)
- Mikroorganismen (1)
- Minimum Waiting Time (1)
- Mischverbindung (1)
- Mock-up (1)
- ModuH2Pipe@BAM (1)
- Molten pool behaviour (1)
- Multi - physical modeling (1)
- Multi-principal element alloy (1)
- Multielement-Legierung (1)
- Multiple principal element alloy (1)
- Multiple-principal element alloy (1)
- NDT (1)
- Neuronales Netz (1)
- Neutron imaging (1)
- Ni alloy (1)
- Nickel-based superalloy (1)
- Non-sharp defects (1)
- Normung (1)
- Nuclear reactor systems (1)
- Offshore steel grade (1)
- Offshore wind turbine (1)
- Online monitoring (1)
- Optical tomography (1)
- Peak stress method (1)
- Phase field modeling (1)
- Plane crystalization (1)
- Plasma-transferred arc welding (1)
- Plastic material flow (1)
- Polymers (1)
- Post processing heat treatment (1)
- Post weld heat treatment (1)
- Potential drop technique (1)
- Powder Bed Fusion of Metals with Laser Beams (1)
- Preciptiates (1)
- Principal stress (1)
- Probabilistic Assessment (1)
- Probengeometrie (1)
- Process Chain Integration (1)
- Process Monitoring (1)
- Process Simulation (1)
- Prüfung (1)
- Prüfverfahren (1)
- Pulverbettbasiertes Laserstrahlschmelzen (1)
- QI Digital (1)
- Quality-X (1)
- Qualitätssicherung (1)
- Ray tracing method (1)
- Reduced Order Model (1)
- Reference data (1)
- Repair (1)
- Reparaturschweißen (1)
- Representative Specimens (1)
- Residual Stresses (1)
- Resistance spot welding (1)
- Review (1)
- Riss (1)
- Rissschließeffekte (1)
- Rührreibschweißen (1)
- S-Phase (1)
- SWIR thermography (1)
- Schadensanalyse (1)
- Schadensprävention (1)
- Schutzgas (1)
- Schweißeignung (1)
- Schweißverbindung (1)
- Schwellenwert gegen Ermüdungsrissausbreitung (1)
- Schwer spanbar (1)
- Selective Laser Melting (SLM) (1)
- Shielding gas (1)
- Sicherheit (1)
- Sliding wear (1)
- Slow Strain Rate Testing (1)
- Software (1)
- Solidification behaviour (1)
- Solubility (1)
- Spark plasma sintering (1)
- Split Hopkinson bar (1)
- Standardization (1)
- Steelmaking slag (1)
- Strain fields prediction (1)
- Structure analysis (1)
- Superellipse (1)
- Surface temperature (1)
- Temperature (1)
- Temperature dependence (1)
- Temperature dependent absorption (1)
- Temperature distribution (1)
- Tensile loading (1)
- Testing (1)
- Thermal desorption analysis (1)
- Thermal-fluid-structure coupling model (1)
- Thermo-capillary convection (1)
- Thermo-fluid flow (1)
- Thick-walled steel (1)
- Thin steel plates (1)
- Thoughness (1)
- Tool service life (1)
- Tool-workpiece interaction (1)
- Tribology (1)
- Trägergasheißextraktion (1)
- Turbine disk (1)
- Turbulence (1)
- Two-dimensional solidification (1)
- Ultrasonic vibration (1)
- Unterirdische Speicher (1)
- Viscoplasticity (1)
- Void defect formation mechanism (1)
- WAAM (1)
- WAAM Ti-6Al-4V (1)
- WIG (1)
- Waiting time (1)
- Wasserstoffbindungsverhalten (1)
- Wasserstoffdegradation (1)
- Wasserstoffdiffusion (1)
- Wasserstofflagerung (1)
- Weld pool shape (1)
- Welded Joints (1)
- Welded joint (1)
- Weldments (1)
- Werkstatt (1)
- Werkzeuglebensdauer (1)
- Wind energy (1)
- Windenergie (1)
- Wire Electron Beam Additive Manufacturing (1)
- Wire electron beam additive manufacturing (1)
- Wire-based additive manufacturing (1)
- Wärmbehandlung (1)
- Wärmeführung (1)
- Zink (1)
- additive manufacturing (1)
- high-resolution camera (1)
- hybrid repair (1)
- i-TRIBOMAT (1)
- keyhole dynamics (1)
- laser energy absorption (1)
- molten pool (1)
- numerical modeling (1)
- position detection (1)
- powder bed fusion of metals utilizing a laser beam (1)
- Öffentliche Sicherheit (1)
- Überblick (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (215) (entfernen)
Paper des Monats
- ja (5)
Eingeladener Vortrag
- nein (113)
High-power hybrid laser arc welding of thick materials with electromagnetic weld pool support
(2023)
In addition to the many advantages of deep penetration, increased welding speed and a low sensitivity to manufacturing tolerances such as gap and edge offset, the hybrid laser arc welding (HLAW) process is used increasingly in industrial applications such as shipbuilding or pipeline manufacturing. Nonetheless, thick-walled sheets with a wall thickness of 20 mm or more are still multi-pass welded using the arc welding process, due to increased process instability by increasing laser power. Welding at reduced speed, especially in a flat position, leads to an irregular formation of the root part such as dropping. The hydrostatic pressure exceeds the surface tension, which decreases with increasing seam width. In order to prevent gravity drop-outs, the use of a melt pool support is necessary. Usual weld pool supports such as ceramic or powder supports require time-consuming mechanical detachment. The electromagnetic weld pool support system, which is described in this study, operates without contact and based on generating Lorentz forces in the weld pool. An externally applied oscillating magnetic field induces eddy currents and generates an upward directed Lorentz force, which counteracts the hydrostatic pressure. This allows single-pass welds up to 30 mm by hybrid laser arc welding process with a 20-kW fibre laser. Moreover, it is favoured by the diminished welding speed the cooling rate which leads to an improvement of the mechanical-technological properties of the seams – the lower formation of martensite in the microstructure enables better Charpy impact toughness. The electromagnetic weld pool support extends the limitation of the laser hybrid welding process in the thick sheet area. By adapting the electromagnetic weld pool support to the laser and laser hybrid welding process, the application potential of these technologies for industrial implementation can be drastically increased.
The study deals with the influence of the heat input on the thermal cycles, the microstructure and the mechanical properties for laser-hybrid welded steels of S355J2 with thicknesses up to 30 mm using a 20-kW high-power laser with contactless electromagnetic backing. The focus is on the change of the mechanical properties over the seam thickness. Therefore, the impact toughness and tensile strength were tested in different depths. Based on the experiments, a heat input of 1.3 kJ/mm - 1.6 kJ/mm, 2 kJ/mm - 2.4 kJ/mm and 3.7 kJ/mm were recommended when single-pass welding of 20 mm, 25 mm and 30 mm with a 20-kW laser in regard to the minimum requirements of the mechanical properties, respectively. Lower heat inputs led to undesired microstructure consisting of martensite, hardening and deteriorated impact toughness, where higher heat inputs led to grain-coarsening and even loss of impact strength due to the formation of retained-austenite on the grain boundaries.
The laser hybrid welding process offers many advantages during welding oft hick-walled steels, such as the increased penetration depth and, thus, reduced number of layers, reduced heat input and decreased distortion compared to arc-based welding processes. Especially, when welding high-strength steels (HSS), the reduced heat input plays an essential role. However, a major challenge when laser hybrid welding of thick-walled steels is the limited filler wire mixing over the entire seam thickness, which can lead to changed mechanical properties over the depth. To overcome this issue, the add of oxygen into the shielding gas and its influence on the filler wire mixing and finally to the mechanical properties were investigated within this work. Therefore, 20 mm thick S690QL steels were laser hybrid welded in a single-pass. A contactless electromagnetic backing was used to avoid sagging. The admixture of oxygen was performed by a gas mixer, where the oxygen content was varied between 0 % and 7.2 %. The experiments were also accompanied by laser beam welding tests in steel/glass configuration, where the melt pool geometry as well as the melt flow characteristics were captured by a high-speed camera. It can be concluded, that adding of 2 % to 4 % oxygen into the shielding gas had a positive effect on the filler wire mixing, were up to a depth of 18 mm elements of the filler wire could be observed.
The laser hybrid welding process offers many advantages such as the high penetration depth and high welding speed, and it is characterized by its low heat input compared to the arc-based welding processes, which makes the laser hybrid welding process as a suitable alternative process when welding thick-walled steels. However, there are some challenges when using laser hybrid welding process for thick steels. Due to the uneven cooling conditions and the inhomogeneous filler wire mixing, a typical laser hybrid weld can be divided into two different zones over the depth: the arc-dominated zone on the upper part and the laser-dominated zone in the root part. This leads to different mechanical properties in a laser hybrid welded joint. Due to the high cooling rates and the lack of filler wire in the laser-dominated zone, this area is more critical regarding the mechanical properties, especially the Charpy impact toughness. A low heat input can lead to undesired microstructure consisting of martensite, hardening and deteriorated impact toughness due to the high cooling rate, where higher heat inputs can lead to grain-coarsening and even loss of impact strength. This study deals with the influence of the welding speed and resulting heat input on the cooling rates, the microstructure and the mechanical properties of single-pass laser hybrid welded steels of S355J2 with thickness up to 30 mm. The experiments were performed with a 20-kW fibre laser system and a contactless electromagnetic weld backing on up to 30 mm thick steels in butt-joint configuration in 1G welding position. The cooling time was measured in three different locations near to fusion lines corresponding to different heights of the seam using a special configuration with pyrometers, collimators, and optical fibres. The test specimens for the Charpy impact testing and tensile testing were extracted in up to three different depths. Based on the experiments, a heat input of 1.3 kJ/mm - 1.6 kJ/mm, 2 kJ/mm - 2.4 kJ/mm and 3.7 kJ/mm were recommended when single-pass laser hybrid welding of 20 mm, 25 mm and 30 mm thick structural steels in regard to the minimum requirements of the mechanical properties, respectively. The optical measurement of the cooling times in different depths could be carried out reproducibly.
Aero-engine turbine disks are safety-relevant components which are operated under high thermal and mechanical stress conditions. The actual part qualification and certification procedures make use of spin-tests conducted on production-similar disks. While these tests provide, on the one hand, a reliable definition of the critical conditions for real components, on the other hand they represent a relevant cost item for engine manufacturers. The aim of this work is to present two alternative burst speed assessment methods under development based on the Failure Assessment Diagram (FAD) and a global stability criterion, respectively. In the scope of the fracture mechanics assessment, the failure modes hoop-burst and rim-peeling are investigated with semicircular surface cracks modelled at the critical regions on the turbine disk. The comparison of the predicted critical rotational speed shows good agreement between the assessment methods.
Friction stir welding (FSW) has the capacity to join the Al/Ti dissimilar structures with superior mechanical properties. The microstructures and mechanical characteristics of Al/Ti dissimilar FSW joints are determined by the heat and mass transfer during the welding process. However, a quantitative study of the Al/Ti dissimilar FSW process is lacking. Therefore, using the computational fluid dynamics (CFD) and volume of fluid (VOF) approach, a multi-phase model was constructed for quantitatively analyzing the heat and mass transfer behaviour in dissimilar FSW of TC4 titanium alloy and AA2024-T4 aluminium alloy. The mixed material was treated as a functionally graded material (FGM) to compute the thermophysical characteristics at the weld nugget zone (WNZ). Due to the vast disparity in the thermophysical characteristics of aluminum and titanium alloy, the temperature field in Al/Ti dissimilar FSW was severely asymmetric. The temperature of titanium alloy on the advancing side (AS) was higher than that of aluminium alloy on the retreating side (RS) at the same distance from the tool centre line near the tool shoulder, but it was lower than that of aluminium alloy on the RS without the influence of the shoulder. Due to the high flow stress of titanium alloy, plastic material flow mostly occurred on the RS of aluminium alloy in the Al/Ti dissimilar FSW, with its percentage exceeding 80%. This model was validated by experiment results.
Overview of ongoing research and future prospects on polyethylene neutron shielding materials at bam
(2023)
The extension of the interim storage period of radioactive waste before disposal will cause additional challenges for the nuclear waste management in Germany, so that an extensive knowledge of the long-term performance of casks, including their components and inventories, will be required for future extended storage licenses.
Ultra-high and high molecular weight polyethylenes ((U)HMW-PE) are used for neutron shielding purposes in casks for storage and transport of spent fuel and high-level waste due to their extremely high hydrogen content. During their service life of several decades as cask components, the PE materials are exposed to neutron and gamma radiation from the radioactive inventory of the casks, mechanical assembling stresses and temperature. All these combined effects affect the material properties of such components which in turn may be crucial for some possible accident scenarios.
At the Bundesanstalt für Materialforschung und -prüfung (BAM), the effects of high temperature exposure in combination with subsequent or previous irradiation were investigated with a comprehensive aging program including thermal aging at 125 °C for different aging periods up to 5 years and irradiation with doses ranging from 50 to 600 kGy.
This contribution provides an overview of the ongoing research related to the structural changes of (U)HMW-PE induced by gamma irradiation and high temperature exposure and focuses on current research perspectives at BAM with regard to the prediction of the dynamic behavior of the material during extended interim storage in case of an accident scenario. First results of the coupled effect of temperature, radiation and mechanical loading will be presented. The effect of microstructural changes induced by gamma irradiation and high temperature on the mechanical behavior of (U)HMW-PE will be assessed.
Overview of ongoing research and future prospects on polyethylene neutron shielding materials at BAM
(2023)
The extension of the interim storage period of radioactive waste before disposal will cause additional challenges for the nuclear waste management in Germany, so that an extensive knowledge of the long-term performance of casks, including their components and inventories, will be required for future extended storage licenses.
Ultra-high and high molecular weight polyethylenes ((U)HMW-PE) are used for neutron shielding purposes in casks for storage and transport of spent fuel and high-level waste due to their extremely high hydrogen content. During their service life of several decades as cask components, the PE materials are exposed to neutron and gamma radiation from the radioactive inventory of the casks, mechanical assembling stresses and temperature. All these combined effects affect the material properties of such components which in turn may be crucial for some possible accident scenarios.
At the Bundesanstalt für Materialforschung und -prüfung (BAM), the effects of high temperature exposure in combination with subsequent or previous irradiation were investigated with a comprehensive aging program including thermal aging at 125 °C for different aging periods up to 5 years and irradiation with doses ranging from 50 to 600 kGy.
This contribution provides an overview of the ongoing research related to the structural changes of (U)HMW-PE induced by gamma irradiation and high temperature exposure and focuses on current research perspectives at BAM with regard to the prediction of the dynamic behavior of the material during extended interim storage in case of an accident scenario. First results of the coupled effect of temperature, radiation and mechanical loading will be presented. The effect of microstructural changes induced by gamma irradiation and high temperature on the mechanical behavior of (U)HMW-PE will be assessed.
Liquid metal embrittlement (LME) cracking is a phenomenon observed during resistance spot welding (RSW) of zinccoated advanced highstrength steels (AHSS) in automotive manufacturing. In this study, severe cracks are observed at the edge of the sheet under reduced flange widths. These cracks, traversing the AHSS sheet, culminate at the edge with a width of approximately 1.2 mm.
Through combined numerical and experimental investigations, and material testing, these cracks are identified and validated as a new type of LME crack. The mechanism behind this crack formation is attributed to unique geometric conditions that, when compared to center welding, amplify radial material flow by ninefold to 0.87 mm. The resultant tangential tensile stresses approximate 760 MPa, which exceed the yield strength of the examined advanced highstrength steel (AHSS) under heightened temperature conditions, and when combined with liquid zinc, promote the formation of this new type of LME crack.
The effect of the oscillating metal vapor plume on the keyhole and molten pool behavior during the laser beam welding of AlMg3 aluminum alloys is investigated by experimental and numerical methods. The real-time height of the metal vapor plume is measured by high-speed camera observation. The obtained experimental results are used to evaluate the additional heating source and laser beam attenuation caused by the scattering and absorption based on the Beer–Lambert theory. Furthermore, the dynamic behavior of the metal vapor plume is incorporated into a 3D transient heat transfer and fluid flow model, coupled with the ray tracing method, for the laser beam welding of the AlMg3 alloy. It is found that additional heating resulting from the scattered and absorbed laser beam energy by the metal vapor plume significantly expands the shape of the molten pool on the top region. Moreover, the oscillating metal vapor plume caused the fluctuation of the high-temperature region in the molten pool. The probability of keyhole collapse at the bottom increases 17% due to the oscillating laser power induced by the laser beam attenuation. The internal interplay between the metal vapor plume, molten pool shape, and keyhole collapse is obtained. The developed model has been validated by experiments, which shows a good agreement.
The effect of the oscillating metal vapor plume on the keyhole and molten pool behavior during the laser beam welding of AlMg3 aluminum alloys is investigated by the experimental and numerical method. The real-time height of the metal vapor plume is measured by high-speed camera observation. The obtained experimental results are used to evaluate the additional heating source and laser beam attenuation caused by the scattering and absorption based on the Beer-Lambert theory. Furthermore, the dynamic behavior of the metal vapor plume is incorporated into a 3D transient heat transfer and fluid flow model, coupled with the ray tracing method, for the laser beam welding of the AlMg3 alloy. It is found that the additional heating resulting from the scattered and absorbed laser beam energy by the metal vapor plume significantly expands the shape of the molten pool on the top region. Moreover, the oscillating metal vapor plume caused the fluctuation of the molten pool shape. The probability of keyhole collapse at the bottom increases significantly to 72% due to the oscillating laser power induced by the laser beam attenuation. The internal interplay between the metal vapor plume, molten pool shape, and the keyhole collapse are obtained. The developed model has been validated by the experiments, which shows a good agreement.
The contactless magnetohydrodynamic technology has been considered as a potential and promising method to improve the weld qualities of deep penetration laser beam welding. In this paper, numerical investigations are conducted to study the influence of the auxiliary oscillating magnetic field on the porosity suppression in laser beam welding of 5754 aluminum alloy. To obtain a deeper insight into the suppression mechanism, a three-dimensional transient multi-physical model is developed to calculate the heat transfer, fluid flow, keyhole dynamic, and magnetohydrodynamics. A ray tracing algorithm is employed to calculate the laser energy distribution on the keyhole wall. A time-averaged downward Lorentz force is produced by an oscillating magnetic field. This force acts in the molten pool, leading to a dominant downward flow motion in the longitudinal section, which blocks the bubble migration from the keyhole tip to the rear part of the molten pool. Therefore, the possibility for the bubbles to be captured by the solidification front is reduced. The electromagnetic expulsive force provides an additional upward escaping speed for the bubbles of 1 m/s ~ 5 m/s in the lower and middle region of the molten pool. The simulation results are in a good agreement with experimental measurements. Based on the results obtained in this study, a better understanding of the underlying physics in laser beam welding enhanced by an auxiliary oscillating magnetic field can be provided and thus the welding process can be further optimized reducing the porosity formation.
The effect of the oscillating metal vapor plume on the keyhole and molten pool behavior during the laser beam welding of AlMg3 aluminum alloys is investigated by experimental and numerical methods. The real-time height of the metal vapor plume is measured by high-speed camera observation. The obtained experimental results are used to evaluate the additional heating source and laser beam attenuation caused by the scattering and absorption based on the Beer–Lambert theory. Furthermore, the dynamic behavior of the metal vapor plume is incorporated into a 3D transient heat transfer and fluid flow model, coupled with the ray tracing method, for the laser beam welding of the AlMg3 alloy. It is found that additional heating resulting from the scattered and absorbed laser beam energy by the metal vapor plume significantly expands the shape of the molten pool on the top region. Moreover, the oscillating metal vapor plume caused the fluctuation of the high-temperature region in the molten pool. The probability of keyhole collapse at the bottom increases 17% due to the oscillating laser power induced by the laser beam attenuation. The internal interplay between the metal vapor plume, molten pool shape, and keyhole collapse is obtained. The developed model has been validated by experiments, which shows a good agreement.
Magnetohydrodynamic technology is increasingly recognized as a promising approach for enhancing the quality of deep penetration laser beam welding. This study employs experimental and numerical methods to investigate the effects of an auxiliary oscillating magnetic field on reducing porosity in the laser beam welding of 5754 aluminum alloy. The experimental results clearly demonstrate a significant reduction in the porosity ratio, thereby validating the efficacy of applying MHD technology in mitigating porosity during the laser beam welding process. In addition, a transient 3D multi-physical model has been developed, integrating the magnetohydrodynamic and metal vapor plume, to gain a more comprehensive understanding of the porosity suppression mechanism. The introduction of an oscillating magnetic field generates a time-averaged downward Lorentz force. This Lorentz force, in turn, induces an electromagnetic expulsive force, which effectively increases the upward escape velocity of bubbles in the molten pool. Furthermore, the molten pool shape is significantly enlarged, which further facilitate the escape of bubbles. The simulation results agree well with the experimental results.
Through experimental observation and auxiliary numerical simulation, this investigation studies the different types of grain refinement of 5754 aluminum alloy laser beam welding by applying a transverse oscillating magnetic field. Scanning electron microscope results have proved that the application of a magnetic field can reduce the average crystal branch width and increase its number. The interaction between the induced eddy current generated by the Seebeck effect and the applied external magnetic field produces a Lorentz force, which is important for the increase of the number of crystal branches. Based on the theory of dendrite fragmentation and the magnetic field-induced branches increment, the grain size reduction caused by the magnetic field is studied. Furthermore, the effects of the magnetic field are analyzed by combining a phase field method model and simulations of nucleation and grain growth. The grain distribution and average grain size after welding verifies the reliability of the model. In addition, the introduction of a magnetic field can increase the number of periodic three-dimensional solidification patterns. In the intersection of two periods of solidification patterns, the metal can be re-melted and then re-solidified, which prevents the grains that have been solidified and formed previously from further growth and generates some small cellular grains in the new fusion line. The magnetic field increases the building frequency of these solidification structures and thus promotes this kind of grain refinement.
Through experimental observation and auxiliary numerical simulation, this investigation studies the different types of grain refinement of 5754 aluminum alloy laser beam welding by applying a transverse oscillating magnetic field. Scanning electron microscope results have proved that the application of a magnetic field can reduce the average crystal branch width and increase its number. The interaction between the induced eddy current generated by the Seebeck effect and the applied external magnetic field produces a Lorentz force, which is important for the increase in the number of crystal branches. Based on the theory of dendrite fragmentation and the magnetic field-induced branches increment, the grain size reduction caused by the magnetic field is studied. Furthermore, the effects of the magnetic field are analyzed by combining a phase field method model and simulations of nucleation and grain growth. The grain distribution and average grain
size after welding verify the reliability of the model. In addition, the introduction of a magnetic field can increase the number of periodic three-dimensional solidification patterns. In the intersection of two periods of solidification patterns, the metal can be re-melted and then re-solidified, which prevents the grains, that have been solidified and formed previously, from further growth and generates some small cellular grains in the new fusion line. The magnetic field increases the building frequency of these solidification structures and thus promotes this kind of grain refinement.
Through experimental observation and auxiliary numerical simulation, this investigation studies the different types of grain refinement of 5754 aluminum alloy laser beam welding by applying a transverse oscillating magnetic field. Scanning electron microscope results have proved that the application of a magnetic field can reduce the average crystal branch width and increase its number. The interaction between the induced eddy current generated by the Seebeck effect and the applied external magnetic field produces a Lorentz force, which is important for the increase in the number of crystal branches. Based on the theory of dendrite fragmentation and the magnetic field-induced branches increment, the grain size reduction caused by the magnetic field is studied. Furthermore, the effects of the magnetic field are ana lyzed by combining a phase field method model and simulations of nucleation and grain growth. The grain distribution and average grain size after welding verify the reliability of the model. In addition, the introduction of a magnetic field can increase the number of periodic three-dimensional solidification patterns. In the intersection of two periods of solidification patterns, the metal can be re-melted and then re-solidified, which prevents the grains, that have been solidified and formed previously, from further growth and generates some small cel lular grains in the new fusion line. The magnetic field increases the building frequency of these solidification structures and thus promotes this kind of grain refinement.
Numerical analysis of ultrasonic vibration enhanced friction stir welding of dissimilar Al/Mg alloys
(2023)
The ultrasonic vibration enhanced friction stir welding (UVeFSW) process has unique advantages in joining dissimilar Al/Mg alloys. While there are complex coupling mechanisms of multi-fields in the process, it is of great significance to model this process, to reveal the influence mechanism of ultrasonic vibration on the formation of Al/Mg joints.
In this study, the acoustic-plastic constitutive equation was established by considering the influence of both ultrasonic softening and residual hardening on the flow stress at different temperatures and strain rates. And the ultrasonic induced friction reduction (UiFR) effect on friction coefficient in different relative directions at the FSW tool-workpiece interface was quantitatively calculated and analyzed.
The Al/Mg UVeFSW process model was developed through introducing the above acoustic effects into the model of Al/Mg friction stir welding (FSW). The ultrasonic energy is stronger on the aluminum alloy side. In the stirred zone, there is the pattern distribution of ultrasonic sound pressure and energy. The heat generation at the tool-workpiece contact interface and viscous dissipation were reduced after applying ultrasonic vibra-tion. Due to the UiFR effect, the projection of friction coefficient and heat flux distributions at the tool-workpiece interface present a "deformed" butterfly shape. The calculated results show that ultrasonic vibra-tion enhanced the material flow and promoted the mixing of dissimilar materials.
Intermetallische Werkstoffe werden für Hochtemperaturanwendungen immer wichtiger. Insbesondere Aluminide mit hohen spezifischen Festigkeiten haben ein großes Potenzial für Leichtbauanwendungen, z. B. werden Titanaluminide bereits in Flugzeugturbinen eingesetzt. Ökonomische und ökologische Aspekte sind die treibende Kraft zur Substitution konventioneller Legierungen, z. B. Nickelbasislegierungen, die eine wesentlich höhere Kostenintensität und ein höheres Gewichts-Festigkeits-Verhältnis aufweisen. Insbesondere Eisenaluminide (FeAl) sind aufgrund guter mechanischer Eigenschaften und der guten Verfügbarkeit der wichtigsten Hauptlegierungselemente attraktiv. Speziell entwickelte FeAl-Legierungskonzepte ermöglichen eine wirtschaftliche Produktion im Kokillenguss, bei der die Erstarrung der Schmelze spezielle komplexe Gefüge ermöglicht, um die hohen thermischen und mechanischen Eigenschaften durch eine hohe Anzahl von harten Ausscheidungen entlang der Korngrenzen zu erreichen. Zu diesen Eigenschaften gehört aber auch, dass notwendige Bearbeitungsschritte, wie das Schlichtfräsen, zur Erzielung komplexer Endkonturen, zu vorzeitigem Werkzeugverschleiß und geringen Oberflächengüten führen. Für das finale FeAl-Bauteil ist eine hohe Oberflächenintegrität insbesondere in sicherheitsrelevanten Anwendungen in der Luftfahrt oder im Energiebereich erforderlich. Aus diesem Grund konzentriert sich die vorliegende Untersuchung auf die Mechanismen und die Minimierung des Werkzeugverschleißes und die Auswirkungen auf die Oberfläche eines in Kokille vergossenen FeAl-Bauteils. Neben den Optimierungen des Fräsprozesses und der Werkzeugparameter (Geometrie, Material) wird ein modernes hybrides Bearbeitungsverfahren, das ultra-schallunterstützte Fräsen (USAM), eingesetzt, bei dem eine Überlagerung mit einer hochfrequenten Schwingung des rotierenden Werkzeugs erzeugt wird. Analysen der Kräfte und Temperaturen im Fräsprozess, der Verschleißerscheinungen am Werkzeug und der Oberflächenintegrität zeigen positive Auswirkungen durch USAM. Darüber hinaus wird eine valide Grundlage für die Optimierung des Werkzeugs und des Fräsprozesses geschaffen, um eine hohe Oberflächenintegrität (z. B. Verringerung von Zugeigenspannungen und Defekten) und eine längere Werkzeuglebensdauer zu gewährleisten, die zukünftig eine wirtschaftliche Herstellung von FeAl-Bauteilen ermöglicht.
Wear behavior of innovative niobium carbide cutting tools in ultrasonic-assisted finishing milling
(2023)
The resources of niobium exceed the ones of tungsten by an order of magnitude. With 92%, Brazil is today the main global producer of niobium. Hence, niobium carbides (NbC) are a sustainable and economic alternative to conventionally used cutting materials, especially tungsten carbides (WC). Moreover, NbC can be used in Ni alloy matrix and thus offer significant advantages by substituting WC in Co matrix as cutting materials in terms of health risks and raw material price and supply risk. Based on recent studies which found an increased performance of NbC compared to WC cutting tools in machining higher strength steels, the composition NbC12Ni4Mo4VC was chosen for finish machining of a high-strength steel S960QL in this study. The experiments were carried out on an ultrasonic-assisted 5-axis milling machine using NbC tools specially made to benchmark them with commercially available coated WC cutting inserts. In addition, the influence of a coating system for the NbC inserts is tested and evaluated for its performance in the cutting process. Tool wear and cutting force analyses are implied to identify optimal parameter combinations as well as tool properties for the novel NbC tool. Together with the oscillation of ultrasonic-assisted milling, the loads on the component surface and the tool can be reduced and the wear behavior of the novel NbC tool can be refined. These milling tests are accompanied by standardized wear tests, i.e., pin-on-disc, between the aforementioned material combinations, and the results are correlated with each other. Finally, the behavior when using hard-to-cut materials such as Ni alloys, or innovative materials such as iron aluminide is also being tested, as these are constantly in the focus of machining optimization. With this strategy, comprehensive knowledge is achievable for future efficient application of NbC for milling tools, which have already been researched for decades using WC.