Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2022 (64) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (27)
- Vortrag (27)
- Beitrag zu einem Tagungsband (9)
- Forschungsbericht (1)
Schlagworte
- Laser beam welding (18)
- Weld pool shape (7)
- Porosity (6)
- DED (4)
- Gründungsstrukturen (4)
- Microstructure (4)
- Numerical modeling (4)
- Solidification (4)
- Weld pool dynamics (4)
- Artificial neural network (3)
- Electromagnetic backing (3)
- Laser hybrid welding (3)
- Leichtbau (3)
- Multi-physical modeling (3)
- Numerical process simulation (3)
- Offshore Windenergieanlagen (3)
- Quality assurance (3)
- Ti-6Al-4V (3)
- AGIL (2)
- Additive Fertigung (2)
- Additive Manufacturing (2)
- Additive manufacturing (2)
- Arc welding (2)
- Automatisierte schweißtechnische Fertigung (2)
- Bulge formation (2)
- Charpy impact toughness (2)
- Critical strain (2)
- Data preparation (2)
- Deep penetration (2)
- Digital transformation (2)
- Duplex AISI 2205 (2)
- Elektromagnetische Schmelzbadsicherung (2)
- Elektronenstrahlschweißen (2)
- Hochleistungsschweißen (2)
- Keyhole dynamics (2)
- Laser Metal Deposition (LMD) (2)
- Laser beam welding (LBW) (2)
- Laser energy distribution (2)
- Laserhybridschweißen (2)
- MSG-Schweißen (2)
- Melt pool dinamics (2)
- Nickel (2)
- Numerical simulation (2)
- Open science (2)
- Optical flow (2)
- Process monitoring (2)
- Ray-tracing (2)
- Research data management (2)
- Schweißnahtbewertung (2)
- Strain measurement (2)
- Submerged arc welding (2)
- Thermal cycles (2)
- Thick-plate welding (2)
- Thick-walled steel (2)
- WAAM (2)
- WelDX (2)
- Wärmenachbehandlung (2)
- 9%Ni steel (1)
- AM (1)
- AM feature integration (1)
- Advanced High-Strength Steel (AHSS) (1)
- Al-Mg-Si-Legierungen (1)
- Al/Mg alloys (1)
- AlMgSi Legierungen (1)
- Automated welding (1)
- Automatisierte Fertigung (1)
- Automatisierte schweißtechniche Fertigung (1)
- Bending test (1)
- Bionik (1)
- Bulging effects (1)
- Carbon dioxide footprint (1)
- Crack (1)
- Crater (1)
- Deep penetration laser beam welding (1)
- Dickblech (1)
- Direct laser deposition (1)
- Directed Energy Depositio (1)
- Directed Energy Deposition (1)
- Dissimilar joints (1)
- EBAM (1)
- Edge quality (1)
- Electron beam (1)
- Elektromagnetische Badstütze (1)
- Elektromagnetische Schmelzbadstütze (1)
- Element distribution (1)
- Element transport (1)
- Energy parameters of the arc (1)
- Environmental impact categories (1)
- FGM (1)
- Finite element simulation (1)
- Flüssigmetallinduzierte Rissbildung (1)
- Friction stir welding (1)
- Functionally Graded Materials (1)
- Gap bridgeability (1)
- Hardness (1)
- Heat Input (1)
- High-Power Welding (1)
- High-power laser (1)
- High-strength fine-grained steels (1)
- Hochfester Stahl (1)
- Hybrid Laser-Arc Welding (1)
- Hybrid laser arc welding (1)
- Hybrid laser-arc welding (1)
- Implementierung (1)
- Inconel 625 (1)
- Integrated alignment features (1)
- Kl (1)
- L-PBF (1)
- Laser Beam Welding (1)
- Laser Metal Deposition (1)
- Laser cutting (1)
- Laser metal deposition (1)
- Laser powder-based directed energy deposition (1)
- Laser welding (1)
- Leichtbauprinzipien (1)
- Life cycle assessment (1)
- Lightweight principles (1)
- Liquid Metal Embrittlement (1)
- Liquid Metal Embrittlement (LME) (1)
- Low-Cycle-Fatigue (1)
- Magnetic field (1)
- Magnetohydrodynamics (1)
- Magnetohydrodynamics (MHD) (1)
- Matching ferritic filler metal (1)
- Mechanical mismatching (1)
- Mechanical properties (1)
- Mechanical properties of the joints (1)
- Mechanisch technologische Kennwerte (1)
- Mechanische Eigenschaften (1)
- Model calibration (1)
- Molten pool behaviour (1)
- Neutron diffraction (1)
- Ni-based austenitic filler metal (1)
- Numerical welding simulations (1)
- Offshore Windenergie (1)
- Offshore wind turbines (1)
- Oscillating magnetic field (1)
- Partial penetration (1)
- Pipe Welding (1)
- Pipe weld preparation (1)
- Plasma cutting (1)
- Porosität (1)
- Post-weld heat treatment (1)
- Preheating (1)
- Qualitätssicherung (1)
- Ray teacing (1)
- Ray tracing method (1)
- Ray-tracing methods (1)
- Reduced order modelling (1)
- Residual stresses (1)
- Resistance Spot Welding (RSW) (1)
- Resistance spot welding (1)
- Schweißprozesse (1)
- Shipbuilding steel (1)
- Simulation (1)
- Solidification craking (1)
- Stainless Steel (1)
- Stainless steels (1)
- Support structures (1)
- TIG welding (1)
- Tensile properties (1)
- Thermo-capillary convection (1)
- Thermo-fluid flow (1)
- Thick-Walled Steel (1)
- Turbulence (1)
- Two-run welding technique (1)
- Ultrasonic vibration (1)
- Umweltwirkungen (1)
- Verfahrensvergleich (1)
- WEBAM (1)
- Weld imperfections (1)
- Weldability (1)
- Welding Current (1)
- Welding parameter (1)
- Widerstandspunktschweißen (1)
- Windkraftanlagen (1)
- Wire arc additive manufacturing (1)
- Wire electron beam additive manufacturing (1)
- Wire feed laser beam welding (1)
- X-ray computed tomography (1)
- Zink (1)
- laser energy distribution (1)
- Ökobilanzierung (1)
- Ökonomische und ökologische Vorteile (1)
Organisationseinheit der BAM
- 9.3 Schweißtechnische Fertigungsverfahren (64) (entfernen)
Eingeladener Vortrag
- nein (27)
Diese Arbeit zeigt erstmals die Anwendung einer elektromagnetischen Schmelzbadsicherung beim einlagigen MSG-Schweißen von dickwandigen Stählen. Die innovativen Entwicklungen im Bereich des Lichtbogenschweißverfahrens ermöglichen eine Erhöhung der Abschmelzleistung, um die Einschweißtiefe zu steigern. Somit kann die Lagenanzahl reduziert und die Produktivität gesteigert werden. Allerdings besteht insbesondere beim einlagigen Schweißen von dickwandigen Bauteilen in PA-Position ein erhöhtes Risiko für das gravitationsbedingte Austropfen der Schmelze an der Wurzel. Zur Verhinderung werden Badsicherungen eingesetzt, die mechanisch angebracht und nach dem Schweißen entfernt werden müssen, was zeit- und kostenintensiv ist.
Die im Rahmen dieser Studie eingesetzte elektromagnetische Schmelzbadsicherung wirkt dem gravitationsbedingten Austropfen der Schmelze entgegen und kompensiert den hydrostatischen Druck. Sie wirkt kontaktlos, was im Gegensatz zu herkömmlichen Badsicherungen vorteilhaft ist, so dass auf eine zeit- und kostenintensive Nachbearbeitung der Schweißnahtwurzel verzichtet werden kann. Das auf extern angelegten oszillierenden Magnetfeldern beruhende Verfahren wird dabei unterhalb des zu schweißenden Bauteils positioniert. Die Magnetfeldlinien sind quer zur Schweißrichtung ausgerichtet, sodass längs zur Schweißrichtung Wirbelströme im Werkstück und eine stets nach oben gerichtete Lorentzkraft generiert werden. Mit Hilfe der elektromagnetischen Badsicherung konnten beim einlagigen MSG-Schweißen von bis zu 10 mm dicken Blechen die Tropfenbildung vermieden werden. Die innovative Technologie ermöglicht es, dickwandige Bauteile einlagig zu schweißen und reduziert die Nachbearbeitungszeiten und -kosten deutlich.
The study deals with the influence of the heat input and the resulting cooling times on the microstructure and Charpy impact toughness of single-pass laser hybrid welded 20-mm thick high-strength steel S690QL. The main focus is on the change of the mechanical properties over the entire seam thickness. The cooling times were measured in-situ using a pyrometer and an optical fibre in three different depths of the seam where Charpy impact test specimens were also later taken. Thereby, three different heat inputs from 1.3 kJ/mm to 2 kJ/mm were investigated. Despite the observed decreased values of both t8/5-cooling time and the Charpy impact toughness in the root part of the seam, the required impact toughness of 38 J/cm2 could be reached in dependance on applied heat input, especially at the heat input of 1.6 kJ/mm.
Die technischen Entwicklungen in der Lasertechnologie in den letzten Jahrzehnten haben eine neue Generation von Hochleistungslasersystemen im Leistungsbereich bis zu 100 kW auf den Markt gebracht. Dennoch ist die industrielle Anwendung des Hochleistungslaserstrahlschweißens auf bis zu 15 mm dicke Bleche beschränkt. Mögliche Ursachen der Einschränkungen des Verfahrens sind z.B. die Sensibilität des Verfahrens auf Fertigungstoleranzen wie Spalt und Kantenversatz, die erhöhte Tropfenbildung bei höheren Blechdicken und eine inhomogene Verteilung des Zusatzwerkstoffes beim Laserhybridschweißen. In dieser Studie wird ein auf extern angelegte Magnetfelder basierte elektromagnetische Schmelzbadstütze eingesetzt, um die Grenzen des Verfahrens zu erweitern und die Herausforderungen zu minimieren. Der wesentliche Vorteil der elektromagnetischen Schmelzbadstütze ist, dass sie berührungslos arbeitet. Mit Hilfe der elektromagnetischen Schmelzbadstütze konnten bei 20 mm dicken Proben aus S355J2 die Tropfenbildung an der Wurzel vermieden werden. Zudem wurde der Einfluss der Kantenqualität auf die Schweißnahtqualität untersucht, wobei verschiedene Schneidverfahren zur Kantenvorbereitung eingesetzt wurden, wie z.B. Plasma-, Brenn- oder Laserschneiden. Es konnte gezeigt werden, dass auch bei schlechteren Kantenvorbereitung im Gegensatz zu gefrästen Bauteilen die Werkstoffe einlagig mittels Laserhybridschweißen bei einer hohen Schweißnahtqualität gefügt werden konnten. Bei plasmageschnittenen Proben wurden zudem eine Spaltüberbrückbarkeit bzw. Kantenversatz von bis zu 2 mm sicher überbrückt. Des Weiteren war es mit Hilfe der externen Magnetfelder möglich, die Durchmischung des Zusatzwerkstoffes über die gesamte Schweißnahttiefe deutlich zu homogenisieren.
It is already known that the laser beam welding (LBW) or hybrid laser-arc welding (HLAW) processes are sensitive to manufacturing tolerances such as gaps and misalignment of the edges, especially at welding of thick-walled steels due to its narrow beam diameter. Therefore, the joining parts preferably have to be milled. The study deals with the influence of the edge quality, the gap and the misalignment of edges on the weld seam quality of hybrid laser-arc welded 20-mm-thick structural steel plates which were prepared by laser and plasma cutting. Single-pass welds were conducted in butt joint configuration. An AC magnet was used as a contactless backing. It was positioned under the workpiece during the welding process to prevent sagging. The profile of the edges and the gap between the workpieces were measured before welding by a profile scanner or a digital camera, respectively. With a laser beam power of just 13.7 kW, the single-pass welds could
be performed. A gap bridgeability up to 1 mm at laser-cut and 2 mm at plasma-cut samples could be reached respectively.
Furthermore, a misalignment of the edges up to 2 mm could be welded in a single pass. The new findings may eliminate the need for cost and time-consuming preparation of the edges.
The application of hybrid laser-arc welding (HLAW) for joining closed circumferential welds is a challenge due to the high risk of forming a defective overlap area with a shrinkage void or solidification cracks in the material thickness. A series of HLAW experiments were performed to understand the development of a faulty overlap area when closing the circumferential weld. Welding trials on flat specimens and pipe segments were supported by numerical analyses in which the thermomechanical behavior of the welds in the overlap area was investigated. Different process control strategies were tested, including variations in defocusing levels and the overlap length. The newly developed HLAW head, including laser optics with a motor-driven collimation system, made it possible to defocus the laser beam during welding without disturbing the stability of the welding process. High-level defocusing of the laser beam of more than 40 mm relative to the specimen surface with a resulting beam diameter of > 2.9 mm, and in combination with a short overlap length of 15 mm, was promising with respect to the formation of a desired cup-shaped weld profile that is resistant to solidification cracks.
Laserstrahlhybridschweissen von Türmen für Windkraftanlagen Ökonomische und ökologische Vorteile
(2022)
Das Laserstrahlhybridschweißen ist beim Schweißen von Türmen für Windkraftanlagen eine Alternative zum Unterpulverschweißen von Dickblechen in Mehrlagentechnik und bietet hier ökonomische und ökologische Vorteile. Der industrielle Einsatz des Verfahrens ist jedoch durch prozessspezifische Herausforderungen eingeschränkt. Die im Beitrag beschriebene kontaktlose elektromagnetische Badstütze dient zur Erweiterung des Verfahrenspotenzials im Dickblechbereich >15 mm.
Diese Arbeit zeigt erstmals die Anwendung einer elektromagnetischen Schmelzbadstütze beim einlagigen MSG-Schweißen von dickwandigen Stählen. Die innovativen Entwicklungen im Bereich des Lichtbogenschweißverfahrens ermöglichen eine Erhöhung der Abschmelzleistung, um die Einschweißtiefe zu steigern. Somit kann die Lagenanzahl reduziert und die Produktivität gesteigert werden. Allerdings besteht insbesondere beim einlagigen Schweißen von dickwandigen Bauteilen in PA-Position ein erhöhtes Risiko für das gravitationsbedingte Austropfen der Schmelze an der Wurzel. Zur Verhinderung werden Badstützen eingesetzt, die mechanisch angebracht und nach dem Schweißen entfernt werden müssen, was zeit- und kostenintensiv ist.
Die im Rahmen dieser Studie eingesetzte elektromagnetische Schmelzbadstütze wirkt dem gravitationsbedingten Austropfen der Schmelze entgegen und kompensiert den hydrostatischen Druck. Sie wirkt kontaktlos, was im Gegensatz zu herkömmlichen Badstützen vorteilhaft ist, so dass auf eine zeit- und kostenintensive Nachbearbeitung der Schweißnahtwurzel verzichtet werden kann. Das auf extern angelegten oszillierenden Magnetfeldern beruhende Verfahren wird dabei unterhalb des zu schweißenden Bauteils positioniert. Die Magnetfeldlinien sind quer zur Schweißrichtung ausgerichtet, sodass längs zur Schweißrichtung Wirbelströme im Werkstück und eine stets nach oben gerichtete Lorentzkraft generiert werden. Mit Hilfe der elektromagnetischen Badstütze konnten beim einlagigen MSG-Schweißen von 8 mm bis 12 mm die Tropfenbildung vermieden werden. Die innovative Technologie ermöglicht es dickwandige Bauteile einlagig zu schweißen und reduziert die Nachbearbeitungszeit deutlich.
The study deals with the influence of the heat input and the resulting cooling times on the microstructure and Charpy impact toughness of single-pass laser hybrid welded 20-mm thick high-strength steel S690QL. The main focus is on the change of the mechanical properties over the entire seam thickness. The cooling times were measured in-situ using a pyrometer and an optical fibre in three different depths of the seam where Charpy impact test specimens were also later taken. Thereby, three different heat inputs from 1.3 kJ/mm to 2 kJ/mm were investigated. Despite the observed decreased values of both t8/5-cooling time and the Charpy impact toughness in the root part of the seam, the required impact toughness of 38 J/cm2 could be reached in dependance on applied heat input, especially at the heat input of 1.6 kJ/mm.
Characterization of Ti-6Al-4V fabricated by multilayer laser powder-based directed energy deposition
(2022)
Laser powder-based directed energy deposition (DED-L) is increasingly being used in additive manufacturing (AM). As AM technology, DED-L must consider specific challenges. It must achieve uniform volume growth over hundreds of layers and avoid heat buildup of the deposited material. Herein, Ti–6Al–4V is fabricated using an approach that addresses these challenges and is relevant in terms of transferability to DED–L applications in AM. The assessment of the obtained properties and the discussion of their relationship to the process conditions and resulting microstructure are presented. The quality of the manufacturing process is proven in terms of the reproducibility of properties between individual blanks and with respect to the building height. The characterization demonstrates that excellent mechanical properties are achieved at room temperature and at 400 °C.
Laser powder-based directed energy deposition (DED-L) is a technology that offers the possibility for 3D material deposition over hundreds of layers and has thus the potential for application in additive manufacturing (AM). However, to achieve broad industrial application as AM technology, more data and knowledge about the fabricated materials regarding the achieved properties and their relationship to the manufacturing process and the resulting microstructure is still needed. In this work, we present data regarding the low-cycle fatigue (LCF) behavior of Ti-6Al-4V. The material was fabricated using an optimized DED-L process. It features a low defect population and excellent tensile properties. To assess its LCF behavior two conventionally manufactured variants of the same alloy featuring different microstructures were additionally tested. The strain-controlled LCF tests were carried out in fully reversed mode with 0.3 % to 1.0 % axial strain amplitude from room temperature up to 400°C. The LCF behavior and failure mechanisms are described. For characterization, optical microscopy (OM), scanning electron microscopy (SEM), and micro-computed tomography (µCT) were used. The low defect population allows for a better understanding of the intrinsic material’s properties and enables a fairer comparison against the conventional variants. The fatigue lifetimes of the DED-L material are nearly independent of the test temperature. At elevated test temperatures, they are similar or higher than the lifetimes of the conventional counterparts. At room temperature, they are only surpassed by the lifetimes of one of them. The principal failure mechanism involves multiple crack initiation sites.