Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
- Zeitschriftenartikel (167)
- Vortrag (165)
- Beitrag zu einem Tagungsband (80)
- Posterpräsentation (19)
- Forschungsbericht (4)
- Dissertation (1)
- Forschungsdatensatz (1)
Schlagworte
- Laser beam welding (86)
- Additive manufacturing (35)
- Additive Manufacturing (33)
- Additive Fertigung (28)
- Laser metal deposition (24)
- Thermography (24)
- Numerical simulation (20)
- Microstructure (19)
- Solidification cracking (18)
- Numerical modeling (15)
- Laser implantation (14)
- Laserstrahlschweißen (14)
- Mechanical properties (14)
- Weld pool shape (14)
- Open science (13)
- Hybrid laser-arc welding (12)
- Porosity (12)
- Process monitoring (12)
- TiB2 (12)
- DED (11)
- Laser hybrid welding (10)
- Research data management (10)
- Surface texturing (10)
- Thermografie (10)
- Thick-walled steel (10)
- Deep penetration laser beam welding (9)
- Laser Metal Deposition (9)
- Laser welding (9)
- Ti-6Al-4V (9)
- AISI D2 (8)
- Digitalisierung (8)
- Element transport (8)
- Hybrid laser arc welding (8)
- Numerical modelling (8)
- Weld pool dynamics (8)
- Charpy impact toughness (7)
- Digitalization (7)
- Electromagnetic backing (7)
- High power laser beam welding (7)
- LMD (7)
- Laserhybridschweißen (7)
- Magnetic field (7)
- Magnetohydrodynamics (7)
- Open data (7)
- Resistance spot welding (7)
- Solidification (7)
- Thermal cycles (7)
- AM (6)
- Bulging effect (6)
- Deep penetration (6)
- Laser Powder Bed Fusion (6)
- Laser-Pulver-Auftragschweißen (6)
- Partial penetration (6)
- Residual stress (6)
- Welding (6)
- 3D printing (5)
- Arc welding (5)
- Artificial neural network (5)
- Critical strain (5)
- Direct Energy Deposition (5)
- Directed Energy Deposition (5)
- Duplex (5)
- End crater (5)
- Grain refinement (5)
- Gründungsstrukturen (5)
- Hochfester Stahl (5)
- Hot cracking (5)
- Hybrid Laser Arc Welding (5)
- Keyhole mode welding (5)
- Laser energy distribution (5)
- Laser powder bed fusion (5)
- Laserimplantation (5)
- Liquid metal embrittlement (5)
- Numerical process simulation (5)
- Simulation (5)
- Stainless Steel (5)
- Thick-plate welding (5)
- WelDX (5)
- Welding simulation (5)
- Widerstandspunktschweißen (5)
- X38CrMoV5-3 (5)
- 3D Druck (4)
- Additive Manufacturing (AM) (4)
- Auftragschweißen (4)
- Bulge effect (4)
- Computed Tomography (4)
- Crack (4)
- Direct energy deposition (4)
- Directed energy deposition (4)
- Endkrater (4)
- Forschungsdatenmanagement (4)
- Gap bridgeability (4)
- Heat conduction (4)
- Highspeed-plasma-laser-cladding (4)
- Inconel 718 (4)
- Keyhole dynamics (4)
- Künstliche Intelligenz (4)
- L-PBF (4)
- Laser Powder Bed Fusion (L-PBF) (4)
- Liquid Metal Embrittlement (4)
- Low Cycle Fatigue (4)
- Mathematical modeling (4)
- Neutron diffraction (4)
- Offshore Windenergieanlagen (4)
- Oscillating magnetic field (4)
- ProMoAM (4)
- Process simulation (4)
- Ray tracing (4)
- Rundnaht (4)
- Selective laser melting (SLM) (4)
- 316L (3)
- 9%Ni steel (3)
- AGIL (3)
- AlSi10Mg (3)
- Automatisierte Fertigung (3)
- Boundary element method (3)
- Bulge formation (3)
- Bulging (3)
- CT (3)
- Circumferential weld (3)
- Computed tomography (3)
- Cryogenic steel (3)
- Crystal branch development (3)
- DED-Arc (3)
- Defokussierung (3)
- Deposition welding (3)
- Dimensional accuracy (3)
- Dissimilar metal weld overlays (3)
- Edge quality (3)
- Electromagnetic Weld Pool Support (3)
- Electromagnetic forces (3)
- Electromagnetic weld pool support (3)
- Elektromagnetische Schmelzbadbeeinflussung (3)
- Elektromagnetische Schmelzbadunterstützung (3)
- Equivalent heat source (3)
- Friction stir welding (3)
- Full Penetration (3)
- Grain size (3)
- Hot stamping (3)
- Hot-Stamping (3)
- Infrared thermography (3)
- Joining dissimilar materials (3)
- Keyhole collapse (3)
- LME (3)
- LPA (3)
- Laser (3)
- Laser Beam Welding (3)
- Laser Pulver Auftragsschweißen (3)
- Laser beam melting (3)
- Laser powder bed fusion (L-PBF) (3)
- Leichtbau (3)
- Life Cycle Assessment (3)
- Mechanical mismatching (3)
- Melt pool dinamics (3)
- Mikrostruktur (3)
- Molten pool dynamics (3)
- Multi-physical modeling (3)
- Multi-physical modelling (3)
- Multispectral thermography (3)
- Online Process Monitoring (3)
- Oscillating vapor plume (3)
- Periodic solidification pattern (3)
- Prozesskette (3)
- Prozessmonitoring (3)
- Prozessüberwachung (3)
- Pufferschichten (3)
- Quality assurance (3)
- Schweißen (3)
- Steel and aluminium (3)
- TES (3)
- Temperature emissivity separation (3)
- Thermo-fluid flow (3)
- Thick Materials (3)
- Transient heat transfer (3)
- Umweltwirkungen (3)
- WAAM (3)
- Wire arc additive manufacturing (3)
- Ökobilanzierung (3)
- Überlappbereich (3)
- AISI 316L (2)
- Adaptives Schweißen (2)
- Advanced high strength steel (2)
- Advanced high strength steels (2)
- Aerosol measurements (2)
- Al/Mg alloys (2)
- Artungleiche Werkstoffe (2)
- Automatisierte schweißtechnische Fertigung (2)
- CFD-model (2)
- Coarse-grained heat-affected zone (2)
- Columnar crystal growth (2)
- Computed tomography (CT) (2)
- Condition monitoring (2)
- DED-EB (2)
- Data fusion (2)
- Data preparation (2)
- Dickblech (2)
- Digital transformation (2)
- Direct Laser Metal Deposition (2)
- Directed Enery Deposition (2)
- Distortion (2)
- Dual phase steel (2)
- Duplex AISI 2205 (2)
- Duplex steels (2)
- EBAM (2)
- Electromagnetic support (2)
- Electron beam welding (2)
- Elektromagnetische Schmelzbadsicherung (2)
- Elektronenstrahlschweißen (2)
- Embedded electronics (2)
- End-crater (2)
- FE-model (2)
- FGM (2)
- Fatigue (2)
- Ferromagnetischer Stahl (2)
- Filler material distribution (2)
- Filler wire mixing (2)
- Finite element simulation (2)
- Flüssigmetallinduzierte Rissbildung (2)
- Full penetration (2)
- Fume (2)
- Fügetechnologie (2)
- Hardness (2)
- Heat treatment (2)
- Heissrisse (2)
- High Temperature Testing (2)
- High-power laser (2)
- High-power laser beam (2)
- High-power laser beam welding (2)
- Hochleistungsschweißen (2)
- Hot crack (2)
- Hybrid welding (2)
- In situ strain (2)
- In-situ Monitoring (2)
- Keyhole mode laser beam welding (2)
- Korrosionsschutz (2)
- LCF (2)
- LPBF (2)
- Lack-of-fusion (2)
- Laser Metal Deposition (LMD) (2)
- Laser beam melting (LBM) (2)
- Laser beam welding (LBW) (2)
- Laser dispersing (2)
- Laser energy absorption (2)
- Laser metal deposition (LMD) (2)
- Laser-Hybridschweißen (2)
- Laser-metal-deposition (2)
- Laserpulverauftragschweißen (2)
- Lichtbogensensorik (2)
- Localized laser dispersing (2)
- Low heat input GMA welding (2)
- MHD (2)
- MSG-Engspaltschweißen (2)
- MSG-Schweißen (2)
- Matching ferritic welding electrode (2)
- Melt pool dynamics (2)
- Metal mixing (2)
- Misalignment of the edges (2)
- Model calibration (2)
- Molten pool (2)
- Molten pool behaviour (2)
- Moving mesh (2)
- Multiple reflections (2)
- NDT (2)
- Neuronales Netz (2)
- Neutron Diffraction (2)
- NiCrBSi (2)
- Nickel (2)
- Nickel alloys (2)
- Offshore wind (2)
- Optical Tomography (2)
- Optical flow (2)
- Optical measurement (2)
- Optical tomography (2)
- Optische Tomografie (2)
- Particle gas emission (2)
- Path planning (2)
- Penetration depth (2)
- Pipe manufacturing (2)
- Pipeline steel X120 (2)
- Plasma (2)
- Plasma-Transferred-Arc (2)
- Plasma-cutting (2)
- Plume (2)
- Powder Bed Fusion (2)
- Preheating (2)
- Presshärten (2)
- Process chain (2)
- Pulsed laser beam welding (2)
- RSW (2)
- Ray tracing method (2)
- Ray-tracing (2)
- Refill friction stir spot welding (2)
- Residual Stress (2)
- Residual stresses (2)
- SMAW (2)
- Schweißnahtbewertung (2)
- Selected Laser Melting (2)
- Selective Laser Melting (2)
- Selective Laser Melting (SLM) (2)
- Selektive-laser-melting (2)
- Ship building (2)
- Single pass welding (2)
- Solidification craking (2)
- Spatter (2)
- Stahl und Aluminium (2)
- Strain measurement (2)
- Strain rate (2)
- Submerged arc welding (2)
- Superellipse (2)
- Superelliptic Lamé curves (2)
- Surface modification (2)
- Temperature distribution (2)
- Temperature field (2)
- Tensile Properties (2)
- Testing method (2)
- Thermo-capillary convection (2)
- Thermographie (2)
- Ti64 (2)
- TiAl5V4 (2)
- Titan (2)
- Titanium (2)
- Toughness (2)
- Tribologie (2)
- Tribology (2)
- Tungsten carbide (2)
- Turbulence (2)
- Ultrasonic vibration (2)
- Vaporization (2)
- Verfahrensvergleich (2)
- Wear resistance (2)
- Weld defects (2)
- Weld pool (2)
- Weld pool behavior (2)
- Weld pool geometry (2)
- Weld pool shape approximation (2)
- Welding thermal cycle (2)
- Wire electron beam additive manufacturing (2)
- Wärmenachbehandlung (2)
- Zinc coated steel (2)
- Zink (2)
- Zugeigenschaften (2)
- 9%Ni steel, (1)
- AC magnetic field (1)
- AHSS (1)
- AM feature integration (1)
- Acoustic Emission (1)
- Adaptive MSG-Lichtbogenprozesse (1)
- Adaptive MSG-Lichtbogenschweißprozesse (1)
- Adaptive control (1)
- Adaptive remeshing (1)
- Adaptive welding beam oscillation (1)
- Adative arc welding processes (1)
- Additive manufacturing (AM) (1)
- Advanced High-Strength Steel (AHSS) (1)
- Advanced high-strength steel (1)
- Advanced high-strength steels (1)
- Al-Mg-Si-Legierungen (1)
- Al/Ti dissimilar joints (1)
- AlMg0.7SiTiB filler wire (1)
- AlMgSi Legierungen (1)
- Alloy 247 (1)
- Alloy 718 (1)
- Aluminium-Druckguss (1)
- Aluminium-Druckgusslegierung (1)
- Aluminum alloys (1)
- Aluminum bronze (1)
- Analytical model (1)
- Analytical solution (1)
- Angle dependency (1)
- Anlagen (1)
- Arc sensor (1)
- Artificial Intelligence (1)
- As-shielded arc welding (1)
- Aufgelöste Tragstrukturen (1)
- Auftriebskräfte (1)
- Austenitic welding electrode (1)
- Automated manufacturing (1)
- Automated welding (1)
- Automation (1)
- Automatisierte schweißtechniche Fertigung (1)
- Automobilindustrie (1)
- Automotive application (1)
- Beam oscillation (1)
- Beam oscillations (1)
- Bending test (1)
- Bewegtes Gitter (1)
- Bionik (1)
- Build-up strategy (1)
- Bulge (1)
- Bulging effects (1)
- CFD model (1)
- Calculation time (1)
- Carbon dioxide footprint (1)
- Centerline solidification cracking (1)
- Characterisation (1)
- Cimensional Accuracy (1)
- Circumferential welds (1)
- Clad steels (1)
- Clustering (1)
- Coarse grained heat affected zone (1)
- Computational fluid dynamics (1)
- Computer vision (1)
- Computertomografie (1)
- Control (1)
- Conventional Ni-based austenitic welding electrode (1)
- Convolutional neural network (1)
- Crack propagation (1)
- Cracking (1)
- Cracking mechanism (1)
- Crater (1)
- Creep behavior (1)
- Cryogenic Steel (1)
- Crystal Plasticity Modelling (1)
- Crystal plasticity (1)
- CuSn1 (1)
- Current density (1)
- DED-L (1)
- DED-LB (1)
- DIC (1)
- Damage prediction (1)
- Datenmanagement (1)
- Deep learning (1)
- Defekte (1)
- Deformed geometry (1)
- Dendrite growth (1)
- Density measurement (1)
- Deposition rate (1)
- Design of experiments (1)
- Die-cast aluminum (1)
- Die-casted aluminum (1)
- Digital Image Correlation (1)
- Digital image correlation (1)
- Digitalisation (1)
- Digitization (1)
- Direct laser deposition (1)
- Directed Energy Depositio (1)
- Displacement (1)
- Dissimilar friction stir welding (1)
- Dissimilar joints (1)
- Dissimilar materials (1)
- Distortion simulation (1)
- Duktilität (1)
- Dwell-time (1)
- EBSD (1)
- Edge effects (1)
- Efficient modelling (1)
- Eindringprüfung (1)
- Electro-thermomechnical model (1)
- Electrode geometry (1)
- Electromagnetic (1)
- Electromagnetic field (1)
- Electromagnetic influence (1)
- Electromagnetic stirring (1)
- Electromagnetic supported degassing (1)
- Electromagnetic weld pool support system (1)
- Electron beam (1)
- Elektonenstrahlschweißen (1)
- Elektromagnetische Badstütze (1)
- Elektromagnetische Porenreduktion (1)
- Elektromagnetische Schmelzbadstütze (1)
- Elektromagnetsiche Schmelzbadbeeinflussung (1)
- Elemenet transport (1)
- Element distribution (1)
- Emisssivity (1)
- Energy parameters of the arc (1)
- Environment (1)
- Environmental impact categories (1)
- Equivalent stress concentration factors (1)
- Equivalent volumetric heat source (1)
- Ermüdungsfestigkeit (1)
- FEM (1)
- Fatigue tests (1)
- Ferritic welding electrode (1)
- Ferromagnetic steels (1)
- Festigkeit (1)
- Fiber laser (1)
- Filler material (1)
- Filler wire (1)
- Fine-grained Steel (1)
- Finite Element Method (1)
- Finite element method (1)
- Finite element method (FEM) (1)
- Flange width (1)
- Flüssigmetallversprödung (1)
- Formgedächtnislegierungen (1)
- Fresnel reflection (1)
- Functionally Graded Materials (1)
- Funktionally Graded Material (1)
- Fusion Zone (1)
- Fusion welding (1)
- Fusion zone (1)
- Fusion zone profile (1)
- Fusion zone size (1)
- Fusion zone, nickel alloys (1)
- Fügequalität (1)
- Füllgradregelung (1)
- GMA welding (1)
- GMR sensors (1)
- GTAW (1)
- Galvanized steel (1)
- Gap bridging (1)
- Gas shielded arc welding (1)
- General analytical solutions (1)
- Gleeble (1)
- Gleeble testing (1)
- Grade S960QL steel (1)
- Grain structure (1)
- Greens function method (1)
- HSLA (1)
- Hardly separable problem (1)
- Heat Input (1)
- Heat Treatment (1)
- Heat flow (1)
- Heat generation (1)
- Heat input (1)
- Heat saturation function (1)
- Heißrisse (1)
- Heißzug (1)
- High brightness (1)
- High power (1)
- High process speeds (1)
- High speed laser cladding (1)
- High strength AlMgSi aluminium alloys (1)
- High strength steels (1)
- High-Power Welding (1)
- High-power fibre laser (1)
- High-strength fine-grained steels (1)
- High-strength low-alloy steel (1)
- High-strength steel sheets (1)
- Highspeed plasma (1)
- Hochleistungslaserstrahlschweißen (1)
- Hohlprofilknoten (1)
- Hold time (1)
- Hot Cracks (1)
- Hot cracking test (1)
- Hot working tool steel (1)
- Hybrid Laser-Arc Welding (1)
- Hybrid components (1)
- Hybrid-laser-arc welding (1)
- Hybridschweißen (1)
- Hydrostatic and arc pressure exceed the Laplace pressure (1)
- IR-Spektroskopie (1)
- IR-spectroscopy (1)
- Impact absorbed energy (1)
- Implementierung (1)
- In situ Monitoring (1)
- In-situ (1)
- In-situ Process Monitoring (1)
- Inconel 625 (1)
- Inconel 939 (1)
- Industrial and Manufacturing Engineering (1)
- Infrared Thermography (1)
- Instumented indentation test (1)
- Integrated alignment features (1)
- Inter layer time (1)
- Joining technology (1)
- KI (1)
- Kaltzähe Stähle (1)
- Karosseriebau (1)
- Kerbspannungskonzept (1)
- Keyhole stability (1)
- Keyhole welding (1)
- Kl (1)
- Knotenweise Zwangsbedingungen (1)
- Kriechen (1)
- Kurz- und Langriss-Ermüdungsbruchmechanik (1)
- Körperschall (1)
- Künstliche Neuronale Netze (1)
- Lamé curves (1)
- Lamé curves approximation (1)
- Laser Metal Deposition; Laser Beam Welding; Duplex; Stainless Steel (1)
- Laser cladding (1)
- Laser cutting (1)
- Laser keyhole welding (1)
- Laser melting (1)
- Laser powder-based directed energy deposition (1)
- Laser surface texturing (1)
- Laser surfacing (1)
- Laser- und Lichtbogenenergie (1)
- Laser-Pulver-Auftragschweißen (LPA) (1)
- Laser-Pulver-Auftragschweißen; Laserstrahlschweißen, Duplex, Pufferschichten (1)
- Laser-beam welding, (1)
- Laser-cutting (1)
- Laser-hybrid welding (1)
- Laser-metal-depositon (1)
- Laser-plasma hybrid (1)
- Laserauftragschweißen (1)
- Laserdispergieren (1)
- Laserstrahl-Hybridschweißen (1)
- Laserstrahlhybridschweißen (1)
- Laserstrahlschmelzen (1)
- Leichtbauprinzipien (1)
- Life Cycle Assessment (LCA) Fusion welding (1)
- Life Cycle Assessment (LCA) Impact categories (1)
- Life Cycle Assessment (LCA) Schweißprozesse (1)
- Life Cycle Assessment (LCA) Umweltwirkungen (1)
- Life cycle assessment (1)
- Lightweight principles (1)
- Liquid Metal Embrittlement (LME) (1)
- Local critical strain (1)
- Local fatigue spproaches (1)
- Localized Laser Dispersing (1)
- Lorentz force (1)
- Low Temperature Toughness (1)
- Low carbon steel (1)
- Low cycle fatigue (1)
- Low feed rates (1)
- Low heat input Gma welding (1)
- Low-Cycle-Fatigue (1)
- MAG Prozesssteuerung (1)
- MWIR (1)
- Magnesium Alloy (1)
- Magnesium alloy (1)
- Magnetic bath support (1)
- Magnetic stray field (1)
- Magnetohydrodynamics (MHD) (1)
- Magnettechnik (1)
- Maritime Components (1)
- Matching ferritic filler metal (1)
- Material modeling (1)
- Material transport (1)
- Materialmodellierung (1)
- Mechanical Properties (1)
- Mechanical anisotropy (1)
- Mechanical properties of the joints (1)
- Mechanical property (1)
- Mechanical-technological properties (1)
- Mechanisch technologische Kennwerte (1)
- Mechanische Eigenschaften (1)
- Melt pool behaviour (1)
- Melt pool defects (1)
- Melt pool depth (1)
- Melting (1)
- Metal (1)
- Metallic vapour plume (1)
- Micro computed tomography (1)
- Microstructure Tensile strength (1)
- Microstructure characterisation (1)
- Mikro-Computertomographie (1)
- Misalignment of edges (1)
- Mittelrippendefekt (1)
- Mixing behavior (1)
- Model order reduction (1)
- Modellierung (1)
- Multi - physical modeling (1)
- Multi-materials joining (1)
- NIR (1)
- Narrow gap welding (1)
- Narrow-gap welding (1)
- NbC (1)
- Necking (1)
- Neural networks (1)
- Ni-based austenitic filler metal (1)
- Ni-based austenitic welding electrode (1)
- Ni-based superalloy (1)
- NiTi-Legierungen (1)
- Nickel-based superalloy (1)
- Nickelbasis-Superlegierungen (1)
- Non-destructive Materials (1)
- Non-destructive testing (1)
- Normen (1)
- Notch stress approach (1)
- Novel metrology (1)
- Novel optical metrology (1)
- Numerical Simulation (1)
- Numerical analysis (1)
- Numerical investigation (1)
- Numerical simulations (1)
- Numerical welding simulation (1)
- Numerical welding simulations (1)
- Numerische ISmulation (1)
- Numerische Simulation (1)
- Oberflächenmessung (1)
- Oberflächenstrukturierung (1)
- Offshore Windenergie (1)
- Offshore wind turbines (1)
- Open Data (1)
- Open source (1)
- OpenScience (1)
- Optical Emission Spectroscopy (1)
- Optical emission spectroscopy (1)
- Optical measurement technique (1)
- Optical measurment technique (1)
- Optische Emissionsspektroskopie (1)
- Optische Emissionsspektroskopie (OES) (1)
- Oszillierendes Magnetfeld (1)
- Parabolic flight (1)
- Partial penetration laser hybrid welding (1)
- Partial penetration welding (1)
- Pearlitic microstructure (1)
- Phase field method (1)
- Pipe Welding (1)
- Pipe weld preparation (1)
- Pipeline (1)
- Pipeline steel of grade X120 (1)
- Plane crystalization (1)
- Plasma cutting (1)
- Plasma-cut samples (1)
- Plasma-transferred-arc (1)
- Plastic deformation (1)
- Plastic material flow (1)
- Plume heating (1)
- Pool dimensions (1)
- Porenreduktion (1)
- Porosity reduction (1)
- Porosität (1)
- Post-weld heat treatment (1)
- Powder Analysis (1)
- Ppreheating temperature (1)
- Precipitation hardening aluminum alloys (1)
- Preheatin (1)
- Primär- und Sekundärspannungen (1)
- Process development (1)
- Profilvermessung (1)
- Proper generalized decomposition (1)
- Prozessregelung (1)
- Prozesssimulation (1)
- Prüfverfahren (1)
- Qualität (1)
- Qualitätssicherung (1)
- Radiological inspections (1)
- Rail tracks (1)
- Ray teacing (1)
- Ray-tracing methods (1)
- Recycling (1)
- Reduced Order Model (1)
- Reduced order modelling (1)
- Resistance Spot Welding (RSW) (1)
- Retained Austenite (1)
- Ringversuch (1)
- Rundnähte (1)
- SLM (1)
- SLM printed plasma torch (1)
- SS316L alloy (1)
- SWIR (1)
- Safety (1)
- Schallemission (1)
- Schallemissionsanalyse (SEA) (1)
- Schmelzbadstütze (1)
- Schutzgas (1)
- Schutzgasschweißen (1)
- Schweißdatenmanagement (1)
- Schweißeigenspannungen (1)
- Schweißeigenspannungs-Tiefen-Profile (1)
- Schweißeignung (1)
- Schweißen von kaltzähen Stählen (1)
- Schweißnahtgeometrie (1)
- Schweißprozesse (1)
- Schweißsimulation (1)
- Schweißstruktursimulation (1)
- Schweißtechnik (1)
- Schweißunregelmäßigkeiten (1)
- Seam geometry (1)
- Secondary heat source (1)
- Selective laser beam melting (1)
- Sensor (1)
- Sensorik (1)
- Shielding gas (1)
- Shipbuilding steel (1)
- SimCoLas (1)
- Single-pass welding (1)
- Software (1)
- Solidification behaviour (1)
- Stabilität von Eigenspannungen (1)
- Stainless steel (1)
- Stainless steels (1)
- Standardisation (1)
- Statistische Versuchsplanung (1)
- Steady-state weld pool (1)
- Steel (1)
- Steel and Al (1)
- Strain fields prediction (1)
- Strain-rate (1)
- Stress-strain behavior (1)
- Structural steel (1)
- Superalloy (1)
- Support structures (1)
- Surface cracks (1)
- TIG welding (1)
- TIG-welding (1)
- TaC (1)
- Tantalum carbide (1)
- Technical crack detection (1)
- Temperature behavior (1)
- Temperature dependent absorption (1)
- Tensile properties (1)
- Tensile resistance spot welding experiment (1)
- Tensile strength (1)
- Tensile testing (1)
- Texture (1)
- Themral cycles (1)
- Thermal-fluid-structure coupling model (1)
- Thermo-fluid dynamics (1)
- Thermograhy (1)
- Thick materials (1)
- Thick plate welding (1)
- Thick plates (1)
- Thick steel plates (1)
- Thick-Walled Steel (1)
- Thick-walled Structures (1)
- Thick-walled steels (1)
- Thick-walled structures (1)
- Thin steel plates (1)
- Three-dimensional crystallization (1)
- TiC (1)
- TiN (1)
- Time over threshold (1)
- Titandiborid (1)
- Titanium alloy (1)
- Tool service life (1)
- Tool steel (1)
- Tool-workpiece interaction (1)
- Transformable steels (1)
- Tubular X-joints (1)
- Tubular joints (1)
- Turbine components (1)
- Two-dimensional solidification (1)
- Two-run welding technique (1)
- Unterpulverschweißen (1)
- V-notch impact toughness (1)
- Vapor recondensation (1)
- Vernetzte Produktion (1)
- Verzug (1)
- Viscoplasticity (1)
- Void defect formation mechanism (1)
- WEBAM (1)
- Weld end crater (1)
- Weld imperfections (1)
- Weld pool modeling (1)
- Weld root (1)
- Weld seam geometry (1)
- Weldability (1)
- Welding Current (1)
- Welding Simulation (1)
- Welding parameter (1)
- Welding process simulation (1)
- Weldx (1)
- Widerstandpunktschweißen (1)
- Windkraftanlagen (1)
- Wineglass shape (1)
- Wire Electron Beam Additive Manufacturing (1)
- Wire feed laser beam welding (1)
- Wire-based additive manufacturing (1)
- Wärmebehandlung (1)
- X-ray Diffraction (1)
- X-ray computed tomography (1)
- X-ray diffraction (1)
- X153CrMoV12 (1)
- X8Ni9 (1)
- Zinc (1)
- Zinkbeschichtung (1)
- Zwischenlagenzeit (1)
- deposition welding (1)
- digital image correlation (1)
- dual phase steel (1)
- highspeed plasma laser cladding (1)
- keyhole dynamics (1)
- laser energy absorption (1)
- laser energy distribution (1)
- laser hybrid welding (1)
- molten pool (1)
- numerical modeling (1)
- resistance spot welding (1)
- thermal cycles (1)
- thick plate welding (1)
- µ-gravity (1)
- Äquivalente Spannungskonzentrationsfaktoren (1)
- Äquivalente Wärmequelle (1)
- Ökonomische und ökologische Vorteile (1)
- ГИДРОДИНАМИКА (1)
- КОНВЕКЦИЯ (1)
- ЛАЗЕРНАЯ СВАРКА (1)
- МЕТОД КОНЕЧНЫХ ЭЛЕМЕНТОВ (1)
- СВАРОЧНАЯ ВАННА (1)
- ТЕМПЕРАТУРНОЕ ПОЛЕ (1)
- ТЕПЛОПРОВОДНОСТЬ (1)
- ЧИСЛЕННОЕ МОДЕЛИРОВАНИЕ (1)
- кратер шва (1)
- кристаллизация, (1)
- плавление, (1)
- сварочная ванна (1)
- температурное поле (1)
- функция теплонасыщения (1)
Organisationseinheit der BAM
- 9.3 Schweißtechnische Fertigungsverfahren (437) (entfernen)
Eingeladener Vortrag
- nein (165)
Electromagnetic stirring is known to promote material flow, reduce porosity, uniform elements distribution, and refine grain in laser beam welding (LBW), which enhances the applicability of LBW in various industries. In this study, a phase-field model of dendrite growth in AA5754 Al alloy electromagnetic stirring laser beam welding was established. The model considered the thermal electromagnetic Lorentz force resulting from the interaction between the electric field generated by the Seebeck effect and the magnetic field, as well as the temperature gradient and solidification rate of the solidification interface obtained from the computational fluid dynamics electromagnetic stirring LBW model. The variation rules of dendrite growth with different magnetic parameters and effects are analyzed. Comprehensively, the magnetic field promotes the solidification rate, thus promoting interfacial instability and a large magnetic flux density leads to a faster interface instability. The solidification rate as well as the temperature gradient affect the growth rate, and the accelerated growth caused by the so lidification rate with a high frequency and a large magnetic flux density effectively inhibits the slow growth caused by the temperature gradient. The thermal electromagnetic Lorentz force is the main factor for the branch increment at low frequencies, while both thermal electromagnetic Lorentz force and temperature gradient in crease the number of branches at high frequencies. The calculated average branch numbers considering various factors in the stable stage under different magnetic parameters were consistent with the results of the scanning electron microscope tests.
Despite the advances in hardware and software techniques, standard numerical methods fail in providing real-time simulations, especially for complex processes such as additive manufacturing applications. A real-time simulation enables process control through the combination of process monitoring and automated feedback, which increases the flexibility and quality of a process. Typically, before producing a whole additive manufacturing structure, a simplified experiment in the form of a beadon-plate experiment is performed to get a first insight into the process and to set parameters suitably. In this work, a reduced order model for the transient thermal problem of the bead-on-plate weld simulation is developed, allowing an efficient model calibration and control of the process. The proposed approach applies the proper generalized decomposition (PGD) method, a popular model order reduction technique, to decrease the computational effort of each model evaluation required multiple times in parameter estimation, control, and optimization. The welding torch is modeled by a moving heat source, which leads to difficulties separating space and time, a key ingredient in PGD simulations. A novel approach for separating space and time is applied and extended to 3D problems allowing the derivation of an efficient separated representation of the temperature.
The results are verified against a standard finite element model showing excellent agreement. The reduced order model is also leveraged in a Bayesian model parameter estimation setup, speeding up calibrations and ultimately leading to an optimized real-time simulation approach for welding experiment using synthetic as well as real measurement data.
A method of solving the thermo-fluid dynamics problem is presented, enabling the prediction of the shape and dimensions of the weld pool during keyhole laser welding of thick plates. It is shown that the rear weld pool boundary can be satisfactorily approximated by a set of superellipses (Lamé curves). The presence of a convex rear weld pool boundary in the mid-plane has been observed experimentally and reproduced numerically. It was shown that in this zone the concentration of liquating impurities increases and the local solidification temperature decreases, contributing to the susceptibility to hot cracking.
Numerical and experimental assessment of liquid metal embrittlement in externally loaded spot welds
(2024)
Zinc-based surface coatings are widely applied with high-strength steels in automotive industry. Some of these base materials show an increased brittle cracking risk during loading. It is necessary to examine electrogalvanized and uncoated samples of a high strength steel susceptible to liquid metal embrittlement during spot welding with applied external load. Therefore, a newly developed tensile test method with a simultaneously applied spot weld is conducted. A fully coupled 3D electrical, thermal, metallurgical and mechanical finite element model depicting the resistant spot welding process combined with the tensile test conducted is mandatory to correct geometric influences of the sample geometry and provides insights into the sample’s time dependent local loading. With increasing external loads, the morphology of the brittle cracks formed is affected more than the crack depth. The validated finite element model applies newly developed damage indicators to predict and explain the liquid metal embrittlement cracking onset and development as well as even ductile failure.
A fundamental study of physical mechanisms of wineglass-shaped fusion zone profile in laser melting
(2024)
The fusion zone geometry in laser melting processes e.g., laser welding and laser-based additive manufacturing, of metallic materials has commonly a wineglass-shaped profile which is critical to the grain orientation and stress distribution. Hereby, we adopt for the first time a decoupling work through a combination of multi-physics modelling and experiments to reveal the fundamental mechanisms of this special morphology. Two physicsbased easy-to-use metal vapour models are proposed to consider the vapour’s momentum and thermal effects separately. It is found that the direct laser energy absorption and Marangoni shear stress which are widely hypothesised to dominate the wineglass-shape formation show only a minor influence. The additional heating from the metallic vapour plume rather than its momentum impact contributes predominantly to the enlarging of the molten pool top region, resulting directly in the formation of the wineglass-shaped fusion zone. The generality of the plume heating effect is also validated in two types of materials (steel and Al) in a wide range of parameters.
Beim Unterpulverschweißen sind die Prozessgeräusche ein Indikator für eine gute Fügequalität. Diese Beurteilung kann i.d.R. nur von einer erfahrenen Fachkraft durchgeführt werden. Eine kürzlich entwickelte künstliche Intelligenz kann automatisch das akustische Prozesssignal anhand vortrainierter Merkmale klassifizieren und die Fügequalität anhand des Geräuschs beurteilen. Der Algorithmus, einmal richtig trainiert, kann den Prüfaufwand beim Unterpulverschweißen deutlich reduzieren.
The present Ph.D. thesis provides a comprehensive experimental and theoretical study of the bulging-cracking relationship in laser beam welding of thick unalloyed steel sheets. It focuses on experimentally proving the existence of the bulging region and on developing a coupled multiphysics mathematical framework to analyze its influence on the three critical factors controlling the susceptibility to solidification cracking, namely the thermal, metallurgical, and mechanical factors.
The research employs a novel experimental setup, utilizing a combination of transparent quartz glass and thick unalloyed steel sheet, enabling real-time visualization of the weld pool geometry and confirming the existence of a distinctive bulging region. To deepen the understanding of these experimental insights, an extensive multiphysics mathematical framework was developed and rigorously verified and validated. This framework introduces an innovative approach using Lamé curves for accurately describing complex three-dimensional weld pool geometries, including the bulging region's characteristics. Through analytical solutions and numerical procedures, it facilitates the computation of solidification parameters, which are crucial for understanding the metallurgical aspects of crack formation. The framework also incorporates a mechanical model to assess and evaluate the local stress distribution within the bulging region.
The findings indicate that an elongated, sharply shaped bulging region significantly increases the susceptibility to solidification cracking. This is attributed to its adverse impact on the distribution and local dwell time of liquid metal residing at grain boundaries during solidification, combined with the localized tensile stresses identified in the bulging region.
In essence, this research contributes to the broader understanding of solidification cracking in laser beam welding of thick unalloyed steel sheets, with a particular focus on the bulging region. The insights and methodologies developed in this thesis are valuable for future research and advancements in the application of the laser beam welding technology for joining high-thickness unalloyed steel components.
The spatial laser energy absorption inside the keyhole is decisive for the dynamic molten pool behaviors and the resultant weld properties in high-power laser beam welding (LBW). In this paper, a numerical simulation of the LBW process, considering the 3D transient heat transfer, fluid flow, and keyhole dynamics, is implemented, in which the free surface is tracked by the volume-of-fluid algorithm. The underlying laser-material interactions i.e., the multiple reflections and Fresnel absorption, are considered by an advanced ray-tracing method based on a localized Level-Set strategy and a temperature-dependent absorption coefficient. The laser energy absorption is analyzed from a time-averaged point of view for a better statistical representation. It is found for the first time that a noticeable drop of the time-averaged laser energy absorption occurs at the focus position of the laser beam, and the rest region of the keyhole has relatively homogenous absorbed energy. This unique absorption pattern may lead to a certain keyhole instability and have a strong correlation with the detrimental bulging and narrowing phenomena in the molten pool. The influence of the different focus positions of the laser beam on the keyhole dynamics and molten pool profile is also analyzed and compared. The obtained numerical results are compared with experimental measurements to assure the validity of the proposed model.
The amount of absorbed energy in the keyhole as well as its spatial and temporal distribution is essential to model the laser beam welding process. The recoil pressure, which develops because of the evaporation process induced by the absorbed laser energy at the keyhole wall, is a key determining factor for the macroscopic flow of the molten metal in the weld pool during high-power laser beam welding. Consequently, a realistic implementation of the effect of laser radiation on the weld metal is crucial to obtain reliable and accurate simulation results. In this paper, we discuss manyfold different improvements on the laser-material interaction, namely, the ray tracing method, in the numerical simulation of the laser beam welding process. The first improvement relates to locating the exact reflection points in the ray tracing method using a so-called cosine condition in the determination algorithm for the intersection of reflected rays and the keyhole surface. A second correction refers to the numerical treatment of the Gaussian distribution of the laser beam, whose beam width is defined by a decay of the laser intensity by a factor of 1/e2, thus ignoring around 14% of the total laser beam energy. In the third step, the changes in the laser radiation distribution in the vertical direction were adapted by using different approximations for the converging and the diverging regions of the laser beam, thus mimicking the beam caustic. Finally, a virtual mesh refinement was adopted in the ray tracing routine. The obtained numerical results were validated with experimental measurements.
The effect of the oscillating metal vapor plume on the keyhole and molten pool behavior during the laser beam welding of AlMg3 aluminum alloys is investigated by experimental and numerical methods. The real-time height of the metal vapor plume is measured by high-speed camera observation. The obtained experimental results are used to evaluate the additional heating source and laser beam attenuation caused by the scattering and absorption based on the Beer–Lambert theory. Furthermore, the dynamic behavior of the metal vapor plume is incorporated into a 3D transient heat transfer and fluid flow model, coupled with the ray tracing method, for the laser beam welding of the AlMg3 alloy. It is found that additional heating resulting from the scattered and absorbed laser beam energy by the metal vapor plume significantly expands the shape of the molten pool on the top region. Moreover, the oscillating metal vapor plume caused the fluctuation of the high-temperature region in the molten pool. The probability of keyhole collapse at the bottom increases 17% due to the oscillating laser power induced by the laser beam attenuation. The internal interplay between the metal vapor plume, molten pool shape, and keyhole collapse is obtained. The developed model has been validated by experiments, which shows a good agreement.