Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
Dokumenttyp
- Posterpräsentation (797) (entfernen)
Sprache
- Englisch (663)
- Deutsch (133)
- Französisch (1)
Schlagworte
- Corrosion (36)
- Additive manufacturing (30)
- Mechanochemistry (24)
- Additive Manufacturing (20)
- Glass (20)
- Nanoparticles (19)
- Crystallization (17)
- Degradation (14)
- Fluorescence (14)
- In situ (14)
- Computed tomography (13)
- Residual stress (13)
- Korrosion (12)
- Biofilm (11)
- Hydrogen (11)
- Laser-induced periodic surface structures (LIPSS) (11)
- Microstructure (11)
- SAXS (11)
- Catalysis (10)
- Methanogens (10)
- Nanoparticle (10)
- Sintering (10)
- Thermography (10)
- X-ray refraction (10)
- Boehmite (9)
- Computed Tomography (9)
- Stainless steel (9)
- AFM (8)
- Cocrystal (8)
- KorroPad (8)
- Laser powder bed fusion (8)
- Quality assurance (8)
- Corrosion resistance (7)
- EPR (7)
- Electron microscopy (7)
- Heat treatment (7)
- Nichtrostender Stahl (7)
- PE-HD (7)
- Selective laser melting (7)
- Synthesis (7)
- 316L (6)
- Amorphous phases (6)
- Automation (6)
- Creep (6)
- DNA (6)
- Dosimetry (6)
- Femtosecond laser ablation (6)
- Geant4 (6)
- Heterogeneous catalysis (6)
- MIC (6)
- MOFs (6)
- Microdosimetry (6)
- Neutron diffraction (6)
- Oxidation (6)
- Phosphates (6)
- Polymer (6)
- Polymorphism (6)
- Prüfmethode (6)
- Qualitätssicherung (6)
- Simulation (6)
- ToF-SIMS (6)
- Welding (6)
- Additive Fertigung (5)
- Aluminium (5)
- Archaea (5)
- C-F bond activation (5)
- Coarsening (5)
- DFT (5)
- Dielectric spectroscopy (5)
- Duplexstahl (5)
- Dye (5)
- FTIR (5)
- Gefahrgut (5)
- Gefahrstoff (5)
- LEE (5)
- Laser Powder Bed Fusion (5)
- Microplastic (5)
- Microplastics (5)
- Milling (5)
- Nanocomposite (5)
- Nanocomposites (5)
- Niobium carbide (NbC) (5)
- PBF-LB/M (5)
- Polymorph (5)
- Quantum dot (5)
- Radiation damage (5)
- Reference material (5)
- SEM (5)
- Self-healing (5)
- Silver nanoparticles (5)
- Struvite (5)
- ThermoCalc (5)
- Thin films (5)
- Transition metal (5)
- Transmission electron microscopy (5)
- UHPC (5)
- Wear (5)
- XANES (5)
- Ageing (4)
- AlSi10Mg (4)
- AuNP (4)
- Bioactive (4)
- Composite-Druckgefäße (4)
- Concrete (4)
- Corrosion testing (4)
- Crack growth (4)
- DCB (4)
- DNA damage (4)
- Diesel (4)
- Digitalisierung (4)
- Discotic Liquid Crystals (4)
- Energy deposit (4)
- FAIR (4)
- Fatigue (4)
- Flexible crystals (4)
- Friction (4)
- Geant4-DNA (4)
- Graphene (4)
- Hardness (4)
- Hydrogen assisted cracking (4)
- Imaging (4)
- Implants (4)
- Inconel 686 (4)
- Iron oxide nanoparticles (4)
- LIBS (4)
- Laser Beam Melting (4)
- Laser profilometry (4)
- Low energy electrons (4)
- MCS (4)
- Metal phosphonates (4)
- Monte-Carlo simulation (4)
- NMR (4)
- Nano (4)
- Nanoconfinement (4)
- Nanoplastic (4)
- Pitting corrosion (4)
- Polyethylene (4)
- Polymers (4)
- Radiationtherapy (4)
- Radioactive decay (4)
- Ringversuch (4)
- Spectroscopic ellipsometry (4)
- Steel (4)
- Sulfidation (4)
- Synchrotron (4)
- TEM (4)
- TiO2 (4)
- Tribology (4)
- Upconversion (4)
- Validierung (4)
- X-ray diffraction (4)
- XPS (4)
- XRD (4)
- 3D High-temperature shape screening (3)
- AM (3)
- Ab-initio (3)
- Alloy 2618A (3)
- Assay (3)
- Bending modulus (3)
- Beta decay (3)
- Biodiesel (3)
- Bitumen (3)
- Bonding analysis (3)
- Brachytherapy (3)
- Cancer treatment (3)
- Carbon nanotubes (3)
- Cermets (3)
- Clustered nanoparticles (3)
- Coating (3)
- Computational Chemistry (3)
- Conductivity (3)
- Corundum grinding (3)
- Dangerous goods (3)
- Database (3)
- Diffusion coefficient (3)
- EBSD (3)
- Ellipsometry (3)
- Environmental Simulation (3)
- Epoxy (3)
- FIB (3)
- Flourescence (3)
- Flow cytometry (3)
- Glass ceramic (3)
- Glass composition (3)
- Gold Nanoparticles (3)
- In situ monitoring (3)
- Korrosionsbeständigkeit (3)
- Korundschleifen (3)
- LCF (3)
- Laser cladding (3)
- Laser implantation (3)
- Livermore model (3)
- Luminescence (3)
- MIPs (3)
- Machine Learning (3)
- Machine learning (3)
- Martensitic stainless steels (3)
- Materials Informatics (3)
- Mesoporosity (3)
- Metallographie (3)
- Metrology (3)
- Microbial induced corrosion (3)
- Microbiologically influenced corrosion (3)
- Micropatterning (3)
- Microscopy (3)
- Molecularly imprinted polymers (3)
- Monitoring (3)
- NDT (3)
- NP (3)
- NTE (3)
- Nanofibers (3)
- Nanomaterial (3)
- Nichtrostende Stähle (3)
- OECD (3)
- OER (3)
- OH radical (3)
- Oberflächenbearbeitung (3)
- Optical spectroscopy (3)
- Orientation (3)
- Oxygen Reduction Reaction (3)
- PGM-free catalyst (3)
- PXRD (3)
- Penelope model (3)
- Phase grating (3)
- Polydopamine (3)
- Polymer 3R (3)
- Polymer blends (3)
- Polypropylene (3)
- ProMoAM (3)
- Quantum dots (3)
- REACH (3)
- Radiation therapy (3)
- Radiolysis (3)
- Raman Spectroscopy (3)
- Reactive extrusion (3)
- Reference data (3)
- Residual Stress (3)
- Rigidity (3)
- Röntgenrefraktion (3)
- SLM (3)
- Sample preparation (3)
- Schadensanalyse (3)
- Schweißen (3)
- Sensibilisierung (3)
- Sialic acid (3)
- Soda-lime silicate glass (3)
- Sol-gel (3)
- Solid-state (3)
- Specific heat spectroscopy (3)
- Strahlen (3)
- Surface analysis (3)
- Surface chemistry (3)
- Synchrotron tomography (3)
- TDEP (3)
- TOPAS (3)
- TOPAS-nbio (3)
- Thermoelectrics (3)
- Thin Films (3)
- Thin polymeric films (3)
- Ti-6Al-4V (3)
- Two-photon polymerisation (3)
- VSSA (3)
- Vickers (3)
- WAXS (3)
- Waveguide (3)
- Wärmebehandlung (3)
- X-ray fluorescence (3)
- ZCF (3)
- ZrF4 (3)
- particle scattering (3)
- 3D (2)
- AGIL (2)
- AIS (2)
- ATR (2)
- Absorption edge tomography (2)
- Adaptives Schweißen (2)
- Adsorbed Layer (2)
- Aktivkohle (2)
- Alkali-silica-reaction (2)
- Alterung von Pyrotechnik (2)
- Aluminium alloys (2)
- Aluminum (2)
- Antimicrobials (2)
- Atomic packing factor (2)
- Atomization (2)
- Austenitic stainless steel (2)
- BAMline (2)
- Bacteria (2)
- Bacterial adhesion (2)
- Barcoding (2)
- Bead (2)
- Bildanalyse (2)
- Bildgebung (2)
- Broadband dielectric spectroscopy (2)
- Building Materials (2)
- Building materials (2)
- CALPHAD (2)
- CCMat (2)
- CCS (2)
- CLP (2)
- Calcium cobaltite (2)
- Carbon capture (2)
- Carbon dioxide (2)
- Catalysts (2)
- Characterization (2)
- Chemical composition (2)
- Chemically Complex Materials (2)
- Composite (2)
- Composites (2)
- Computertomographie (2)
- Confocal (2)
- Core-shell (2)
- Corrosion Testing (2)
- Corrosion inhibition (2)
- Crack (2)
- Crack Propagation (2)
- Crack growth velocity (2)
- Crack healing (2)
- Crack intensity factor (2)
- Creep-resistant steel (2)
- Crystal orientation (2)
- Cycloalyphatic epoxy oligosiloxane (2)
- Damage (2)
- Dark-field transmission electron microscopy (DFTEM) (2)
- Data fusion (2)
- Dental materials (2)
- Deuterium (2)
- Digitalization (2)
- Double cantilever beam (2)
- Durability (2)
- ECHA (2)
- EDX (2)
- ESEM (2)
- Eigenspannungen (2)
- Einstufung (2)
- Electrocatalysis (2)
- Electrochemistry (2)
- Electron beam induced modification (2)
- Elemental composition (2)
- Emission (2)
- Emission test chamber (2)
- Encoding (2)
- Environmental stress cracking (2)
- Environmental stress cracking (ESC) (2)
- Exchange interaction (2)
- Explosionsschutz (2)
- Explosivstoffe (2)
- FEM (2)
- Faseroptik (2)
- FeNi-Oxide NPs (2)
- Ferromagnetism (2)
- Finite element method (2)
- Fire (2)
- Friction and wear (2)
- Fused Filament Fabrication (2)
- GD-OES (2)
- GMR (2)
- GMR-Sensorik (2)
- Gas-Staub-Gemische (2)
- Gel-type electrolytes (2)
- Geothermal (2)
- Glas (2)
- Gold nanocluster (2)
- Gold nanoparticles (2)
- Green chemistry (2)
- Grüneisen parameter (2)
- Hazardous substances (2)
- Henry's constant (2)
- High Pressure (2)
- High temperature corrosion (2)
- High-temperature corrosion (2)
- Hot stamping (2)
- Hybride Gemische (2)
- Hydrogen permeability (2)
- Hydrogen storage (2)
- IUCLID (2)
- Image analysis (2)
- Image processing (2)
- Imaging techniques (2)
- In situ heating (2)
- In-situ (2)
- InP (2)
- Inks (2)
- Integrating sphere spectroscopy (2)
- Interatomic potentials (2)
- Ionic Liquid crystals (2)
- Iron (2)
- L-PBF (2)
- LLG (2)
- LMD (2)
- LTCC (2)
- Landau Lifshitz equation (2)
- Laser beam melting (2)
- Laser beam welding (2)
- Laser metal deposition (2)
- Least-squares adjustment (2)
- Lichtbogensensorik (2)
- Lifetime (2)
- Lithium Ion Batteries (2)
- Load transfer (2)
- Low Cycle Fatigue (2)
- MMC (2)
- MOF (2)
- MSG-Engspaltschweißen (2)
- Macrophages (2)
- Magnesium alloy (2)
- Magnetic moment (2)
- Magnetic nanoparticles (2)
- Materialcharakterisierung (2)
- Metadata schema (2)
- Metal Matrix Composite (2)
- Metal matrix composite (2)
- Metal organic frameworks (2)
- Metals (2)
- Method (2)
- Micromagnetism (2)
- Microwave synthesis (2)
- Mikrobiell induzierte Korrosion (2)
- Modellierung (2)
- Multielectrode array sensors (2)
- Multiplexing (2)
- NFDI (2)
- NIR (2)
- Nanomechanics (2)
- Nanosensor (2)
- Neutron (2)
- Neutron Diffraction (2)
- Non-classical crystallization (2)
- Normung (2)
- Numerical modeling (2)
- OOMMF (2)
- Oberflächenenergie (2)
- Object oriented micromagnetic framework (2)
- Online Process Monitoring (2)
- Ontologie (2)
- Ontology (2)
- Optics (2)
- Oxidglas (2)
- Particle (2)
- Phonons (2)
- Photocatalysis (2)
- Plastic (2)
- Plattform MaterialDigital (2)
- Polycarbonate (2)
- Polymer bilayer coatings (2)
- Porosity (2)
- Powder Bed Fusion (2)
- Precipitation (2)
- Process Monitoring (2)
- Protein (2)
- Proteins (2)
- Prozessüberwachung (2)
- Pyrotechnik (2)
- QHA (2)
- QY (2)
- Quantum yield (2)
- Quecksilberporosimetrie (2)
- REM (2)
- Radiotherapy (2)
- Referenzdaten (2)
- Reflectography (2)
- Resistance (2)
- Resonance frequency (2)
- Robotische Glasschmelzanlage (2)
- Roughness (2)
- SCNC (2)
- SEM/EDS (2)
- SIMS (2)
- SWIR (2)
- Scanning electrochemical microscope (SECM) (2)
- Selected Laser Melting (2)
- Semantic Interoperability (2)
- Semantic Web Technologies (2)
- Semiconductor (2)
- Sicherheitstechnische Kenngrößen (2)
- Silica (2)
- Single molecule (2)
- Single particle spectroscopy (2)
- Small-angle scattering (2)
- SnO2 (2)
- Stainless steels (2)
- Stickstoff (2)
- Stochastic Landau Lifshitz Gilbert equation (2)
- Structural Health Monitoring (2)
- Surface (2)
- Surface functionalization (2)
- Surface integrity (2)
- Surface modification (2)
- Synchrotron X-Ray Refraction (2)
- Synchrotron X-ray computed tomography (2)
- Syngle Crystal alloy (2)
- TED-GC/MS (2)
- Temperature (2)
- Thermally induced porosity (2)
- Thermodynamik (2)
- Thermoelectric materials (2)
- Thermografie (2)
- Thermogravimetrie (2)
- Thin film metrology (2)
- Titanium (2)
- Tool wear (2)
- Topotactic transformation (2)
- Traceability (2)
- Transition metals (2)
- Tungsten carbide (WC) (2)
- Ultra-Thin films (2)
- Ultrashort laser processing (2)
- Ultrasonic-assisted milling (2)
- Ultrasound (2)
- VOC (2)
- Verbundfestigkeit (2)
- Vessels (2)
- Wasserstoff (2)
- Water content (2)
- Water speciation (2)
- Wetting (2)
- Wood (2)
- X-ray computed tomography (2)
- XRF (2)
- Zeolitic imidazolate framework (2)
- ZfP (2)
- Zinc coatings (2)
- Zustandsüberwachung (2)
- beta particle (2)
- cylinders (2)
- 18HLT01 MetVes II (1)
- 29Si-27Al TRAPDOR MAS (1)
- 316L Stainless Steel (1)
- 3D High-temperatue shape screening (1)
- 3D analysis (1)
- 3D coherence scanning interferometry (CSI) (1)
- 3D imaging (1)
- 3D printing (1)
- 3D tomography (1)
- 3D-Formerkennung (1)
- 5-hydroxynicotinic acid (1)
- 5G (1)
- AFM-IR (1)
- AISI 304L (1)
- ALD (atomic layer deposited) (1)
- ALD-Beschichtung (1)
- ALD-Hybridprozesse (1)
- AM IN718 (1)
- ASAXS (1)
- ASR (1)
- ATH (1)
- ATRP (1)
- Abkühlgeschwindigkeit (1)
- Absolute flourometry (1)
- Absorption edge (1)
- Acoustic Emission (1)
- Acoustic Emission (AE) (1)
- Acrylamide based polymers (1)
- Active pharmaceutical ingredient (API) (1)
- Additiv gefertigter Stahl (1)
- Additive Manufacture (1)
- Additive Fertigung (AM) (1)
- Additive surface treatment (1)
- Admixtures (1)
- Adsorbed layer (1)
- Advanced manufacturing (1)
- Advanced materials (1)
- Advanced nanomaterials (1)
- Aerial Robot (1)
- Aerosole (1)
- Affinity chromatography (1)
- Affinity extraction (1)
- Affinity support (1)
- Ag2S (1)
- Aggressive environement (1)
- Aggressive environment (1)
- Aging (1)
- Aging mechanisms (1)
- Air Void System (1)
- Air exchange rate (1)
- Al alloy (1)
- Al-Cu-Li alloys (1)
- Al2O3 (1)
- Al2O3 thin films (1)
- Al2O3-Schichten (1)
- AlSi10Mg alloy (1)
- Albumin (1)
- Alcali activated binders (1)
- Alkali-Kieselsäure-Reaktion (1)
- Alkalialumosilicatsysteme (1)
- Alkaline earth metal (1)
- Aln (1)
- Altglasfragmente (1)
- Altpapierrecycling (1)
- Alumina (1)
- Aluminium Alloy (1)
- Aluminum oxide (1)
- Amino acid analysis (1)
- Ammoniumnitrat (1)
- Amorphous silica particles (1)
- Amphiphilicity (1)
- Amplification (1)
- Anaerob (1)
- Analyser-based imaging (1)
- Analytical solution (1)
- Anisotropy (1)
- Anlage (1)
- Annealing study (1)
- Anodic Aluminum Oxide (1)
- Anodization (1)
- Antibiotics (1)
- Antibodies (1)
- Antibody purification (1)
- Aromatic amino acid analysis AAAA (1)
- Artefact (1)
- Artificial digestion (1)
- Asphaltene content (1)
- Assays (1)
- Atmospheric Corrosion (1)
- Atmospheric Plasma Spraying (1)
- Atomic Force Microscopy (1)
- Atomic Layer Deposition (1)
- Atomic force microscopy (1)
- Atomic fraction (1)
- Ausbildung (1)
- Austenitic stainless steels (1)
- Austenitic steel (1)
- Automatisation (1)
- Automatisierung (1)
- BADGER film (1)
- BBR (1)
- BCS (1)
- BLE (1)
- BODIPY (1)
- BSA (1)
- BTS (1)
- Bacterial growth (1)
- BadgerFilm (1)
- Baudenkmal (1)
- Baustahl (1)
- Baustoffe (1)
- Bauzustandsanalyse (1)
- Benannte Stelle (1)
- Bench braking sequence (1)
- Beratung Behörden/Ministerien (1)
- Beschichtung (1)
- Beta particle (1)
- Beton (1)
- Betonautobahn (1)
- Betonautobahnen (1)
- Betonschallplatte (1)
- Betonschäden (1)
- Bewitterung (1)
- Bexarotene (1)
- Bildverarbeitung (1)
- Bio Ceramics (1)
- Bio-SAXS (1)
- Bio-receptive (1)
- BioSAXS (1)
- Bioactive glass (1)
- Biocide (1)
- Biocides (1)
- Biocomposite (1)
- Biocorrosion (1)
- Biofilm cultivation (1)
- Biofilm formation (1)
- Biofilm growth (1)
- Biofilms (1)
- Bioimaging (1)
- Biomasseverbrennung (1)
- Biomimetics (1)
- Bioreceptivity (1)
- Bioresorbable (1)
- Blast injury (1)
- Bluetooth Low Energy (1)
- Boehmite alumina (1)
- Bonding Analysis (1)
- Bovine serum albumin (1)
- Bragg-edge (1)
- Brazing (1)
- Bremsbeläge (1)
- Brittle / ductile fracture behavior (1)
- Brittle fracture (1)
- Bronze (1)
- Brown-rot fungi (1)
- Bruchmechanik (1)
- Build Angle (1)
- Building products (1)
- Bulk diffusion (1)
- Bulk material (1)
- Bulk properties ageing (1)
- Burst pressure (1)
- Burst test (1)
- C-C coupling (1)
- CALPHAD databases analysis (1)
- CCUS (1)
- CEO (1)
- CERN (1)
- CFD (1)
- CMAS (1)
- CMAS - Calcium-Magnesium-Aluminiumsilikat (1)
- CMSX4 (1)
- CO2-Korrosion (1)
- CONSENS (1)
- CUSP (1)
- Calcium sulfoaluminate cement (1)
- Calculation (1)
- Camera (1)
- Capsules (1)
- Carbide (1)
- Carbon (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon dot (1)
- Carbon fibers (1)
- Carbon nanomembranes (1)
- Carrier Gas Hot Extraction (1)
- Carrier gas hot extraction (1)
- CdSe (1)
- Cearmics (1)
- Cell imaging (1)
- Cement (1)
- Cement hydration (1)
- Ceramic (1)
- Ceramic spring (1)
- Ceramic-ceramc joints (1)
- Ceramics (1)
- Cermet (1)
- Certification (1)
- Certified reference material (1)
- Certified standards (1)
- Charakterisierung (1)
- Chemical Bonds (1)
- Chemical analyses (1)
- Chemical compositions (1)
- Chemically Complex Alloy (1)
- Cheminformatics (1)
- Chloride (1)
- Chromatography (HIC) (1)
- Chromium (1)
- Chromium (III) complexes (1)
- Chromium oxide (1)
- Chromstahl (1)
- Climate chamber simulation (1)
- Co-axial monitoring (1)
- CoCrMo (1)
- Coatings (1)
- Coda Wave Interferometry (1)
- Coherent Rayleigh OTDR (1)
- Cold Spray (1)
- Column chromatography (1)
- Columnar crystal growth (1)
- Columnar liquid crystals (1)
- Compatible solute (1)
- Complex concentrated alloy (CCA) (1)
- Component test (1)
- Composite cylinder (1)
- Composition (1)
- Compound (1)
- Compression (1)
- Compsite tapes (1)
- Configurational entropy (1)
- Confined Columnar Liquid Crystals (1)
- Confocal fluorescence microscopy (1)
- Conservation (1)
- Construction products (1)
- Consumer articles (1)
- Contact resonance (1)
- Conventional testing (1)
- Convolutional neural networks (1)
- Coordination polymer (1)
- Core-shell architecture (1)
- Core/shell materials (1)
- Corosion (1)
- Corrosion behaviour (1)
- Corrosion investigations (1)
- Corrosion loss (1)
- Corrosion product layer (1)
- Corrosion products (1)
- Corrosion protecting system (1)
- Cosolute (1)
- Crack evolution (1)
- Crack propagation (1)
- Crack propagation analysis (1)
- Cracks (1)
- Creep-resistant Steel (1)
- Crush (1)
- Cryo-TEM (1)
- Crystal Engineering (1)
- Crystal plasticity (1)
- Crystal structure (1)
- Crystalline structure (1)
- Curing Monitoring (1)
- Curvelet Transform (1)
- Cutting material (1)
- Cutting tool (1)
- Cutting tools (1)
- Cyclic R-curve (1)
- DED-L (1)
- DIC assisted compression (1)
- DIN 52186 (1)
- DIN EN 252 (1)
- DIN EN ISO/IEC 17025:2018 (1)
- DRIFTS (1)
- DSR (1)
- Damage Analysis (1)
- Damage mechanism (1)
- Damage repair (1)
- Dangerous goods packaging (1)
- Dangerous goods packagings (1)
- Dark-field transmission electron microscopy (1)
- Data (1)
- Data Fusion (1)
- Data Integration (1)
- Data Interoperability (1)
- Data Science (1)
- Data analysis (1)
- Databases (1)
- Datenanalyse (1)
- Datenträger (1)
- Deep Learning (1)
- Defect detection (1)
- Defects (1)
- Deformation (1)
- Deformation-Induced Martensite (1)
- Deformationen (1)
- Degradation of Mechanical Properties (1)
- Degree of damage (1)
- Degree of purity (1)
- Delamination (1)
- Demonstrators (1)
- Dendrimersomes (1)
- Dendritic amphiphiles (1)
- Density (1)
- Density Functional Theory (1)
- Dental material (1)
- Depth-profiling (1)
- Design Fire (1)
- Destabilization (1)
- Detection (1)
- Dielectric Spectroscopy (1)
- Diffraction (1)
- Diffraction Enhanced Imaging (1)
- Diffusion (1)
- Diffusion Coefficient (1)
- Diffusion barrier (1)
- Digital material representation (1)
- Digital twin (1)
- Digitaler Zwilling (1)
- Digtial Representation (1)
- Diopside (1)
- Direct fluorine-metal bond (1)
- Direct laser writing (1)
- Discotic Liquid Crystal (1)
- Discotic liquid crystals (1)
- Dislocations (1)
- Distortion (1)
- Distributed acoustic sensing (1)
- Distributed fiber optic sensors (1)
- Distributed vibration sensing (1)
- Distribution during filling (1)
- Disäuren (1)
- Doping study (1)
- Downstream processing (1)
- Dredging mud (1)
- Drop test (1)
- Druckwelle (1)
- Duplex stainless steel (1)
- Duplex stainless steels (1)
- Dust analysis (1)
- Dynamic light scattering (1)
- Dynamics (1)
- EBSD analysis (1)
- EC4SafeNano (1)
- EDS (1)
- EDX Analysis (1)
- EDXRD (1)
- EMN (1)
- EMPIR project (1)
- EPMA (1)
- ESI-TOF-MS (1)
- EU H2020 project (1)
- Ectoin (1)
- Ectoine (1)
- Eddy Current (1)
- Edelstahl (1)
- Eigenspannung (1)
- Eindringmodul (1)
- Einkristalllegierung (1)
- Einzelfaserdurchzugsversuch (1)
- Eisen (1)
- Elastomer (1)
- Elastomers (1)
- Electro catalyst (1)
- Electrochemical noise (1)
- Electrodeposited Ni - coatings (1)
- Electrolysis (1)
- Electromicroscopy (1)
- Electron Backscatter Diffraction (1)
- Electron Microscopy (1)
- Electron Probe Microanalysis (EPMA) (1)
- Electron beam (1)
- Electron probe microanallysis (EPMA) (1)
- Electron probe microanalysis (EPMA) (1)
- Electronic Lab Notebook (1)
- Electrospinning (1)
- Elektrochemische Charakterisierung (1)
- Elevated Temperatures (1)
- Elevated temperatures (1)
- Ellipsometric metrology (1)
- Emission chamber testing (1)
- Emissivity (1)
- Energetic materials (1)
- Energietechnik (1)
- Energy (1)
- Energy dispersive X-ray spectroscopy (1)
- Energy input (1)
- Engineered Nanomaterials (1)
- Environment (1)
- Epox (1)
- Epoxy nanocomposite (1)
- Er(III) (1)
- Erneuerbare Energien (1)
- Erosion (1)
- European Metrology Network (1)
- European standard (1)
- Exciton diffusion (1)
- Experimental study (1)
- Extracellular polymeric substances (1)
- Extracellular vesicles (EV) (1)
- Extrusion (1)
- FE (1)
- FIB/SEM (1)
- FNCT (1)
- FTIR spectroscopy (1)
- Fachwerkträger (1)
- Fallhammer (1)
- Far-infrared spectroscopy (1)
- Farbätzen (1)
- Fasermodifikation (1)
- Fatigue Crack Growth (1)
- Fatigue crack growth (1)
- Fatigue damage (1)
- Façade (1)
- Fe-Cr alloys (1)
- Fe-Ni (1)
- Fe2TiO5 (1)
- FeCr- alloys (1)
- FeNi (1)
- FeNi thin film (1)
- FeSnOx (1)
- Femtosecond laser (1)
- Femtosecond laser processing (1)
- Ferroelektret (1)
- Fiber (1)
- Fiber reinforced dental post (1)
- Fiber sensors (1)
- Fiber-optic microarray (1)
- Fiberglass composite (1)
- Film depositition (1)
- Film thickness determination (1)
- Finite Element Method (1)
- Finite Element Modelling (1)
- Fire Retardant (1)
- Flow Cell (1)
- Flow-System (1)
- Fluorescence quenching (1)
- Fluorescence spectroscopy (1)
- Fluorescent dyes (1)
- Fluorescent polymer optical fibres (1)
- Fluoride (1)
- Fluorides (1)
- Fluorine Interaction (1)
- Flüssigmetallversprödung (1)
- Foam tiles (1)
- Focussed ion beam (1)
- Focussed ion beam growth (1)
- Force distance curves (1)
- Formaldehyde (1)
- Foundation (1)
- Fractional factorial (1)
- Fractography (1)
- Fracture Toughness (1)
- Fracture surface analysis (1)
- Fragmentation (1)
- Fraktografie (1)
- Fraktographie (1)
- Fre (1)
- Fresnoit (1)
- Full Notch Creep Test (1)
- Full Notch Creep Test (FNCT) (1)
- Full-Notch Creep Test (FNCT) (1)
- Fullerene (1)
- Functional group detection (1)
- Functionality type distribution (1)
- Funktionelle Beschichtungen (1)
- Funtional Groups (1)
- Füllgradregelung (1)
- G5P (1)
- GEXRF (1)
- GUM-compliance (1)
- GVP (1)
- Gamma-Co60 radiation (1)
- Gamma-irradiation (1)
- Gas Sorption (1)
- Gas Tomography (1)
- Gas solubility (1)
- Gas turbine (1)
- Gefüge (1)
- Gel electrolytes (1)
- Gelartige Elektrolyte (1)
- Gene five protein (1)
- Generator (1)
- Geopolymer (1)
- Geopolymers (1)
- Geothermal energy (1)
- Geothermie (1)
- Ggraphene polymer nanocomposite (1)
- GlasDigital (1)
- Glasanalyse (1)
- Glasig-kristalline Sinterwerkstoffe (1)
- Glaskeramik (1)
- Glass paints (1)
- Glass transformation temperature (1)
- Glass transition (1)
- Glass-ceramic (1)
- Glasstruktur (1)
- Gleeble (1)
- Gleitlinien (1)
- Glue (1)
- Glutaraldehyde (1)
- Glycerin (1)
- Gold (1)
- Gold Nanoparticle (1)
- Gold mosaics (1)
- Grain boundary corrosion (1)
- Graphene /-oxide (1)
- Graphene functionalisation (1)
- Graphene functionalization (1)
- Graphene polymer nanocomposite (1)
- Grazing exit (1)
- Grenzflächenaktive Verbindung (1)
- Grey cast iron machining (1)
- Growth Kinetics (1)
- Guanidine receptor (1)
- Guideline (1)
- HDPE Sorption (1)
- HF (1)
- HR-CS-AAS (1)
- HV cable accessories (1)
- HV-Insulation (1)
- Haftfestigkeit (1)
- Haftvermittler (1)
- Halbleiterphysik (1)
- Hard X-ray photoelectron spectroscopy (HAXPES) (1)
- Harmonisation in microplastics (1)
- Harsh environments (1)
- Hatch length (1)
- Hauptkomponentenanalyse (1)
- Hazmat (1)
- Heat Treatment (1)
- Heating oil storage tanks (1)
- Heating oil tanks (1)
- Heißzug (1)
- Helium- und Wasserstoffpermeation (1)
- Heterogene plastische Deformation (1)
- Hexafluorobenzen (1)
- HfO2 (1)
- High Cycle Fatigue (1)
- High Molecular Polyethylene (1)
- High Temperature Testing (1)
- High Voltage Insulation (1)
- High entropy alloy (1)
- High entropy alloys (1)
- High resolution ultrasonic testing (1)
- High temperature (1)
- High temperature corrosion resistance (1)
- High voltage cable accessories (1)
- High-Performance Concrete (1)
- High-density polyethylene (1)
- High-entropy alloys (1)
- High-strength steels (1)
- High-temperature stability (1)
- Historic buildings (1)
- Hochfester Feinkornbaustahl (1)
- Hochtemperaturanwendungen (1)
- Hollow specimen (1)
- Holz (1)
- Holzbaustoff (1)
- Holzprüfung (1)
- Homemade explosives (1)
- Honeycomb structure (1)
- Horizontaldilatometer (1)
- Human plasma (1)
- Humidity (1)
- Hybrid inorganic/organic copolymers (1)
- Hydration (1)
- Hydrogen diffusion (1)
- Hydrogen permeation (1)
- Hydrophobic interaction (1)
- Hydrothermal treatment (1)
- Hydroxyectoine (1)
- Härtevergleichsplatten (1)
- Härteverlauf Schweißnaht (1)
- ILC (1)
- IN 625 (1)
- IN 718 (1)
- IN718 (1)
- IR (1)
- IR spectroscopy (1)
- ISO 5725 (1)
- Illumina (1)
- ImAFM (1)
- Image Denoising (1)
- Image segmentation (1)
- Immersion tank testing (1)
- Impact excitation (1)
- Impact strength (1)
- Implant-Test (1)
- In situ Raman (1)
- In situ XRD (1)
- In situ analysis (1)
- In situ diffraction (1)
- In situ measurement (1)
- In situ measurement, (1)
- In situ tensile test (1)
- In situ testing (1)
- In-Situ (1)
- In-Situ Characterization (1)
- In-situ Monitoring (1)
- In-situ SAXS/WAXS (1)
- In-situ compression CT (1)
- In-situ heat treatment (1)
- In-situ loading (1)
- In-situ monitoring (1)
- In-situ tomography (1)
- In718 (1)
- Inconel 718 (1)
- Indoor air (1)
- Industrieabwasseraufbereitung (1)
- Infrared spectroscopy (1)
- Initial attachment (1)
- Initial hydration (1)
- Innovative Messtechnik (1)
- Inorganic polymers (1)
- Instrumented indentation testing (1)
- Instrumentierte Eindringprüfung (1)
- Integrated analysis (1)
- Interface (1)
- Interim storage (1)
- Interlaboratory comparison (1)
- Intermediate (1)
- Internal friction (1)
- Internal oxidation (1)
- Interoperability (1)
- Interpenetrating polymer network (1)
- Interpenetrating polymer networks (1)
- Interphase (1)
- Invasive Arten (1)
- Inverse Analysis (1)
- Inverse analysis (1)
- Inverse problem (1)
- Ionic liquids (1)
- Ionizing radiation damage (1)
- Iridium oxide films (1)
- Iridium-titanium mixed oxides (1)
- Iron aluminides (1)
- Iron oxide (1)
- Isotope analysis (1)
- JNP AdvManuNet (1)
- Kalottenverfahren (1)
- Kaltrissprüfung (1)
- Kavitation (1)
- Keggin Cluster (1)
- Kelvinsondenkraftmikroskopie (1)
- Keramik (1)
- Kiefernholz (1)
- Kieselsäure (1)
- Klebfestigkeit (1)
- Kleidermotte (1)
- Knoevenagel (1)
- Knoevenagel condensation (1)
- Knowledge Readiness Level (1)
- Knowledge Representation (1)
- Knowledge graph and ontologies (1)
- Kombinierete korrosive und mechanische Beanspruchung (1)
- Kondensation (1)
- Konformitätsbewertung (1)
- Konformitötsbewertung (1)
- Kontrastierung (1)
- Korrosionsabtrag (1)
- Kraftabhängige Funktion (1)
- Kristallplastizität (1)
- Künstliche neuronale Netze (1)
- L-PBF 316L (1)
- LBM (1)
- LIBS TIG welding (1)
- LIPSS (1)
- LPBF (1)
- LPSO (1)
- LTCC multilayer (1)
- Laboratory Container (1)
- Laboratory method (1)
- Laborvergleich Härte (1)
- Lanthanide(III) (1)
- Large scale test (1)
- Large-scale production (1)
- Large-scale synthesis (1)
- Large-scale test (1)
- Laser Cladding (1)
- Laser Metal Deposition (1)
- Laser Metal Deposition (LMD) (1)
- Laser ablation (1)
- Laser cludding (1)
- Laser dispersing (1)
- Laser structuring (1)
- Laser-Pulverbettschweißen (1)
- Laser-induced pariodic surface structures (1)
- Laser-induced periodic surface strcutures, LIPSS (1)
- Laserthermografie (1)
- Lasertriangulationssensor (1)
- Latex (1)
- Lattice structure (1)
- Layer-by-layer deposition (1)
- Leaching process (1)
- Least-Squares Adjustment (1)
- Lebensdauer (1)
- Lebensdauerabschätzung (1)
- Lichtmikroskopie (1)
- Ligand (1)
- Ligands (1)
- Lightweight structures (1)
- Lignin (1)
- Lignosulfonate (1)
- Liquid Metal Embrittlement (1)
- Liquid phase sintering (1)
- Lithium batteries (1)
- Lithium-ion batteries (1)
- Lizard (1)
- Load Partition (1)
- Load history (1)
- Loading factor (1)
- Localized corrosion (1)
- Lokale Korrosion (1)
- Long-term monitoring (1)
- Longitudinal Wave (1)
- Low cycle fatigue (1)
- Lubricants (1)
- Luftultraschall (1)
- Luminescence lifetime measurments (1)
- Luminescent materials (1)
- MIC projekt (1)
- MID IR Spectroscopy (1)
- ML (1)
- Machine-Learning Segmentation (1)
- Magic-sized cluster (1)
- Magnesium (1)
- Magnetic nano-particles (1)
- Magnetic stray fields (1)
- Magnetostrictive actuator layer (1)
- Magnetostrictive layer (1)
- Magnetron sputtering (1)
- Manganese oxide (1)
- Maritime atmosphere (1)
- Martensitische nichtrostende Stähle (1)
- Maschinennachgiebigkeit (1)
- Material characterization (1)
- Material degradation (1)
- Material design (1)
- Material model (1)
- Material oxidation (1)
- Material selection (1)
- McSAS3 (1)
- Me-TiO2 (1)
- Measurement uncertainty (1)
- Mechanical Behavior (1)
- Mechanical strength (1)
- Mechanichal behaviour (1)
- Mechanische Kennwertermittlung (1)
- Mechanism (1)
- Mechanochemical oxidation (1)
- Mechanochemical syntheses (1)
- Mechanochemie (1)
- Median lethal energy deposit (1)
- Medieval glasses (1)
- Medieval stained glass (1)
- Mehr-Proben-Kleben (MSB) (1)
- Mehr-Proben-Prüfen (CAT) (1)
- Melt Flow Rate (MFR) (1)
- Melt pool behaviour (1)
- Melting (1)
- Mesoporous (1)
- Mesoporous materials (1)
- Mesoporous thin films (1)
- Messunsicherheit (1)
- Metal matrix composites (1)
- Metal organic framework (1)
- Metal powder characterization (1)
- Metal reducing bacteria (1)
- Metal seal (1)
- Metallsulfide (1)
- Metallurgie (1)
- Methodenvalidierung (1)
- Micro computed tomography (1)
- Micro-XRF (1)
- Micro-heterogeneity (1)
- Microbially influenced corrosion (MIC) (1)
- Microbiological investigation (1)
- Microbiologically Influrenced Corrosion (MIC) (1)
- Microfluidic (1)
- Micromanipulation (1)
- Micromixer (1)
- Microparticles (1)
- Micropatterned dry adhesive (1)
- Microplastics in milk (1)
- Microplastics sampling (1)
- Microprinting (1)
- Microstructure Analysis (1)
- Microstructure analysis (1)
- Microstructure-property relations (1)
- Mikro-CT (1)
- Mikrobiell beeinflusste Korrosion (1)
- Mikrostruktur (1)
- Mineralogie (1)
- Missbräuchliche Verwendung in Stadien (1)
- Mobile anodisation (1)
- Mobile application (1)
- Model alloy (1)
- Model and measurement based analysis (1)
- Modeling (1)
- Moisture (1)
- Moisture drying (1)
- Molar mass distribution (1)
- Molecular Conformation (1)
- Molecular dynamic simulation (1)
- Monte-Carlo simulations (1)
- Morpho-chemical characterization (1)
- Morphology (1)
- Multi-method Metrology (1)
- Multi-sample analysis (1)
- Multielectrode (1)
- Multiphoton Lithography (1)
- Multiphoton lithography (1)
- Multiple ageing and rejuvenation (1)
- Multiplexing sensory fiber-optic microarrays (1)
- NDT Monitoring (1)
- NFDI-MatWerk (1)
- Nano-landscape (1)
- Nano-particles alignment (1)
- Nano-powder characterization (1)
- Nanofiller (1)
- Nanomaterial screening (1)
- Nanomaterials (1)
- Nanoparticel based pH-probes (1)
- Nanophysik (1)
- Nanopipette modification (1)
- Nanopipettes (1)
- Nanoplastics (1)
- Nanoporous media (1)
- Nanorisk (1)
- Nanosafety (1)
- Nanosensors (1)
- Nanostructures (1)
- Natural rubber (1)
- Nd-sensitizer (1)
- Nd3+ (1)
- Neintron diffraction (1)
- Neozoon (1)
- Netron diffraction (1)
- Network Communication (1)
- Neutronbeugungsverfahren (1)
- Neutronen (1)
- Neutronendiffraktion (1)
- Neutronenradiographie (1)
- Ni-base superalloy (1)
- Ni-based alloy (1)
- Nickel based alloy (1)
- Nickelbasislegierungen (1)
- Niobium carbide (1)
- Niobium carbide powder (1)
- Nitrogen (1)
- Non destructive testing (1)
- Non-Destructive Testing (1)
- Non-classical crystallization theory (1)
- Non-destructive testing (1)
- Normalbeton (1)
- Novel equipment (1)
- Nuclear Magnetic Resonance (1)
- Numerical Modeling (1)
- Numerical modelling (1)
- Numerische Simulation (1)
- OH Radical (1)
- OH radical scavenger (1)
- OH radicals (1)
- Oberflächenfunktionalisierung (1)
- Oberflächenkeimbildung (1)
- Offshore (1)
- One-part formulation (1)
- Online NMR Spectroscopy (1)
- Open data (1)
- Open science (1)
- Optical Assays (1)
- Optical Emission Spectroscopy (1)
- Optical Tomography (1)
- Optical connector (1)
- Optical criterion (1)
- Optical layer model (1)
- Optical properties (1)
- Optische Tomografie (1)
- Optoelektronik (1)
- Orientation-dependent microstructure (1)
- Orientierung (1)
- Osmolyte (1)
- Overlay (1)
- Oxide Glasses (1)
- Oxygen reduction reaction (1)
- P25 (1)
- P92 (1)
- PAEK (1)
- PDMS (1)
- PEG (1)
- PFAS (1)
- PH (1)
- PIM-1 (1)
- PMD Core Ontology (1)
- PMDco (1)
- POD (1)
- POSS (1)
- PU Learning (1)
- PVD /ECD process (1)
- Pair Distribution Functions (1)
- Pair distribution function analysis (1)
- Paracetamol (1)
- Partial discharge detection (1)
- Partial penetration (1)
- Particle Synthesis (1)
- Particle measurement (1)
- Particle scattering (1)
- Particle scattering simulations (1)
- Particle size (1)
- Particle size distribution (1)
- Particle size distributuion (1)
- Particle synthesis (1)
- Paste (1)
- Peem (1)
- Permeability (1)
- Permeation (1)
- Perovskite (1)
- Pharmaceuticals (1)
- Phase composition (1)
- Phasenzusammensetzung (1)
- Phosphate (1)
- Phosphonates (1)
- Phosphonic acids (1)
- Phosphorus (1)
- Photocuring (1)
- Photoluminescence (1)
- Photoresist (1)
- Photovoltaic (1)
- Phthalocyanine (1)
- Piezopolarisation (1)
- Pipeline (1)
- Plume (1)
- Politikberatung (1)
- Pollen (1)
- Polyacrylamide (1)
- Polyamid 12 (1)
- Polyaniline (1)
- Polyethylene Terephtalate (1)
- Polyethylene glycol diacrylate (1)
- Polyethylene terephthalate (1)
- Polyethylene, PE-HD (1)
- Polyglycerol (1)
- Polymer Hydrolysis (1)
- Polymer aging (1)
- Polymer coating (1)
- Polymer nanocomposites (1)
- Polymer optical fibers (1)
- Polymer optical fibre (1)
- Polymer-Ceramic-Composite (1)
- Polymeric membrane (1)
- Polymers of intrinsic microporosity (1)
- Polymethyl methacrylate (1)
- Polyurethan (1)
- Polyurethanes (1)
- Pore orientation (1)
- Pores (1)
- Porosity growth (1)
- Porosität (1)
- Porositätsvorhersage (1)
- Porous Materials (1)
- Porous materials (1)
- Portland cement (1)
- Position detection (1)
- Poster presentation (1)
- Postfluorination (1)
- Powder X-ray diffraction (1)
- Powder method (1)
- Preferred orientation (1)
- Pressure loading (1)
- Pressure tanks (1)
- Pressure wave (1)
- Primäre Explosionswirkug (1)
- Probenpräparation (1)
- Process Control (1)
- Processing (1)
- Propagation modes (1)
- Property simulation (1)
- Protective glazing (1)
- Protein a (1)
- Protein hydrolysis (1)
- Protein immobilization (1)
- Protein quantification (1)
- Protein unfolding (1)
- Proton conducting materials (1)
- Proton cunductor (1)
- Proton exchange membrane fuel cells (1)
- Proximatanalyse (1)
- Prozessmonitoring (1)
- Prozessregelung (1)
- Präparation (1)
- Prüfmethoden (1)
- Prüfrichtlinie (1)
- Pulse reflection (1)
- Pulse shape analysis (1)
- Pulvermethode (1)
- Py-GC/MS (1)
- QD (1)
- QSPR (1)
- Quality control (1)
- Qualitätsüberwachung (1)
- Quantitative Analysis (1)
- Quantitative NMR (1)
- Quantum Chemistry (1)
- Quantum Dot-Rod (1)
- Quantum Yield (1)
- Quartz Crystal Microbalance QCM (1)
- Quartz nanopipettes (1)
- Quasi-distributed sensing (1)
- Quenching and partitioning (1)
- Qulitätssicherung (1)
- RAFT (1)
- ROS (1)
- Radar (1)
- Radical Scavenger (1)
- Radical scavenger (1)
- Radicals (1)
- Radiografie (1)
- Radiological inspections (1)
- Raman spectroscopy (1)
- Rare earth nanoparticles (1)
- Ratiometric Sensors (1)
- Ratiometric sensors (1)
- Rauheit (1)
- Rayleigh scattering (1)
- Recycling (1)
- Reduction 4-nitrophenol (1)
- Reduction of agglomerates (1)
- Reductive amination (1)
- Reference Data (1)
- Reference Dataset (1)
- Reference materials (1)
- Reference nanomaterials (1)
- Reference particles (1)
- Reference procedures (1)
- Reference product (1)
- Reference samples (1)
- Registrierungsdossiers (1)
- Reinforcing Bar (1)
- Reinheitsgradbestimmung (1)
- Reliable characterization (1)
- Repair (1)
- Reproducibility (1)
- Research Data Management (1)
- Research data management (1)
- Residual stress measurements (1)
- Residual stress state (1)
- Residual stresses (1)
- Resonance (1)
- Resonanz (1)
- Reverse-time migration (1)
- Rice husk ash (1)
- Rigid amorphous fraction (1)
- Ringversuche (1)
- Risse (1)
- Rissprüfung (1)
- Risswachstum (1)
- Robot-assisted galss melting (1)
- Roboter (1)
- Round robin (1)
- Round robin test (1)
- Rubber (1)
- Röntgen-3D-Computertomographie (1)
- Röntgen-Refraktion (1)
- Röntgenbeugung (1)
- S-phase (1)
- SALSA (1)
- SDS-PAGE (1)
- SEM analysis (1)
- SEP 1927 (1)
- SIEF (1)
- SXRR - Synchrotron X-ray Refraction Radiography (1)
- Safe-by-Design (1)
- Safer by design (1)
- Salt melt (1)
- Sandblasting (1)
- Sandsteine (1)
- Sandstone (1)
- Sandstorm (1)
- Sanger sequencing (1)
- Sapphire (1)
- Sc-ICP-ToF-MS (1)
- Scaffold (1)
- Scale-bridging (1)
- Scanning electron microscopy (1)
- Scanning electron microscopy (SEM) (1)
- Scanning transmission electron microscopy (STEM) (1)
- Scattering (1)
- Schichtdicken (1)
- Schichtherstellung (1)
- Schichttestung (1)
- Schutzverglasung (1)
- Schwefelgehalt (1)
- Schweißdatenmanagement (1)
- Schweißnähte (1)
- Schwindungsinhomogenitäten (1)
- Schwindungsverhalten (1)
- Scientific software (1)
- Sea Water (1)
- Seenotrettungsmittel (1)
- Selbstreinigung (1)
- Selective Electron Beam Melting (1)
- Selective Laser Melting (1)
- Selective laser curing (1)
- Self-assembly (1)
- Self-healing silicone rubber (1)
- Self-powdering (1)
- Self-reactive substances (1)
- Semantic Data (1)
- Semi-metallic friction material (1)
- Sende-Empfangs Prüfkopf (1)
- Sensor (1)
- Sequential learning (1)
- Service life (1)
- Service life model (1)
- Shape (1)
- Shell (1)
- Short chained phthalates (1)
- Shortwave infrared (1)
- Si wafer filter (1)
- Si-Ge (1)
- SiGe (1)
- SiO2 (1)
- Silanisation (1)
- Silanization (1)
- Silica Nanoparticles (1)
- Silica- and Polystyrene Particles (1)
- Silica- and polystyrene particles (1)
- Silicone rubber (1)
- Silver (1)
- Silver nanoparticle (1)
- Simvastatin (1)
- Single cell analysis (1)
- Single crystal X-ray diffraction (1)
- Single cystal (1)
- Single-stranded DNA-binding proteins (1)
- Size and size distribution (1)
- Size effect (1)
- Size-exclusion chromatography (SEC) (1)
- Sliding performances (1)
- Slow Strain Rate Testing (1)
- Slow crack growth (1)
- Slurry (1)
- Small angle x-ray scattering (1)
- Small-angle X-ray scattering (1)
- Small-angle x-ray scattering (1)
- Small-angle xray scattering (1)
- Smart materials (1)
- Smouldering (1)
- Sodiumborosilicate glasses (1)
- Software (1)
- Soil (1)
- Soil-structure interaction (1)
- Solar Cell (1)
- Solarenergie (1)
- Solid-State-Reaction (1)
- Solution doping (1)
- Sorption (1)
- Spectral multiplexing (1)
- Spectrometry (1)
- Spectroscopic Ellipsometry (1)
- Spectroscopy (1)
- Speed of sound (1)
- Sphärische Indenter (1)
- Spinel (1)
- Spontane Polarisation (1)
- Spray drying (1)
- Sprengplattieren (1)
- Spring constant (1)
- Spruce (1)
- Stabilization of HT-structures at room temperature (1)
- Stabilizer (1)
- Stable suspensions (1)
- Stained glass windows (1)
- Stained glasses (1)
- Stainless Steel (1)
- Stainless Steels (1)
- Standard (1)
- Standardisation (1)
- Standardization (1)
- Standardization of Ellipsometry (1)
- Starch (1)
- Starch nanoparticle (1)
- Strain sensors (1)
- Stress cracking resistance (1)
- Strontiumfluoride (1)
- Structural color (1)
- Structural dynamics (1)
- Structural health monitoring (1)
- Subgrain structure (1)
- Submerged arc welding (1)
- Substrate effect (1)
- Sulfiding (1)
- Sulfur (1)
- Superalloy (1)
- Superconducting (1)
- Superhydrophilic surface (1)
- Superhydrophobic surface (1)
- Superplasticizer (1)
- Superplasticizers (1)
- Surface Chemical Transformation (1)
- Surface Energy (1)
- Surface Plasmon Resonance (1)
- Surface characterization (1)
- Surface crystallization (1)
- Surface energy (1)
- Surface functionalities (1)
- Surface group analysis (1)
- Surface morphology (1)
- Surface structuring (1)
- Surface texturing (1)
- Sustainability (1)
- Synchrotron CT (1)
- Synchrotron Radiation (1)
- Synchrotron Tomography (1)
- Synchrotron X-ray Refraction (1)
- Synchrotron X-ray diffraction (1)
- Synchrotron X-ray refraction (1)
- Synchrotron X-ray refraction radiography (1)
- Synchrotron XRD (1)
- Synchrotron radiation (1)
- Synchrotron refraction radiography (1)
- Synthesizability (1)
- Synthetic air (1)
- TATP (1)
- TBC (1)
- TDLAS (1)
- TED-GC-MS (1)
- TEKKEN-Test (1)
- TEM Image (1)
- TGA-FTIR (1)
- THz and mid IR spectroscopy (1)
- THz spectroscopy (1)
- TIG-welding (1)
- TKD (1)
- TMDSC (1)
- TMF (1)
- TRIP (1)
- TRIS (1)
- Talbot-Lau interferomerty (1)
- Talbot-Lau interferometry (1)
- Tankdesign (1)
- Tauchwägung (1)
- Technical Lignin (1)
- Temeprature scaling (1)
- Temperature dependence (1)
- Temperature scaling (1)
- Tensile (1)
- Tensile Properties (1)
- Tensile test (1)
- Terahertz Tomography synthetic aperture (1)
- Terahertz synthetic aperture dielectric materials (1)
- Termites (1)
- Ternary quantum dot (1)
- Test method (1)
- Test methods validation (1)
- Test procedure (1)
- Testing (1)
- Textile fibres (1)
- Texture (1)
- Themal Transitions (1)
- Thermal Spray (1)
- Thermal arrier coatings (1)
- Thermal barrier coatings (1)
- Thermal cycling (1)
- Thermal decomposition (1)
- Thermal treatment (1)
- Thermodynamic analysis (1)
- Thermoelectric generator design (1)
- Thermoelectric oxides (1)
- Thermomagnetic material (1)
- Thermomechanics (1)
- Thermoplastic Polyurethane (1)
- Thermoresponsive polymer (1)
- Thermoresponsive polymers (1)
- Thickness (1)
- Thin Films; (1)
- Thin polymer films (1)
- Ti6Al4V alloy (1)
- TiO2 nanoparticle (1)
- Time-offlight Diffraction (TOFD) (1)
- Time-offlight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved (1)
- Titania nanoparticles (1)
- Titanium Dioxide (1)
- Titanium nitride (1)
- Titanium-di-boride (1)
- Titration (1)
- Tomographie (1)
- Tomography (1)
- Tool steel (1)
- Topas (1)
- Topas-MC (1)
- Topas-nBio (1)
- Topografie (1)
- Topography (1)
- Topometry (1)
- Torsional fatigue (1)
- Total scattering analysis (1)
- Transmission Kikuchi Diffraction (TKD) (1)
- Transmission electron microscope (TEM) (1)
- Transmittance (1)
- Transport mechanism (1)
- Tribological behavior (1)
- Tribologie (1)
- Trinkwasser (1)
- Tunnel (1)
- Two photon polymerisation (1)
- Two-dimensional liquid chromatography (2D-LC) (1)
- Type III composite pressure receptacles (1)
- Tyrosine (1)
- UCNP (1)
- UCST polymers (1)
- UCST-type polymer (1)
- UPLC (1)
- UV Weathering (1)
- UV-irradiation (1)
- Ultra sound (1)
- Ultrafast laser processing (1)
- Ultraschall (1)
- Ultraschalltauchtechnik (1)
- Ultrasonic (1)
- Ultrasonic Testing (1)
- Ultrasonic Transducer (1)
- Ultrasonic assisted milling (1)
- Ultrasonic echo technique (1)
- Uncertainty (1)
- Uncertainty budgets (1)
- UpConversion (1)
- Upconversion nanoparticles (1)
- Upconverting nanoparticles (1)
- VM12 SHC (1)
- Vacuum (1)
- Vacuum hot extraction (1)
- Vakuumheißextraktion (1)
- Validation (1)
- Verbundwerkstoffe (1)
- Vereinfachtes Verfahren (1)
- Vergleichsstahlproben (1)
- Vernetzte Produktion (1)
- Verzinkungen (1)
- Videoskopie (1)
- Virtual experiments (1)
- Vitual computer tomography simulation (1)
- Volatile organic compounds (1)
- WIG-Blindschweißnaht (1)
- Waiting time (1)
- Wasseraufbereitung (1)
- Wasserstoffpermeation (1)
- Waste heat recovery (1)
- Water/alcohol mixtures (1)
- Wave propagation (1)
- Weld Joint (1)
- Wellenprüfung (1)
- White light interference microscopy(WLIM) (1)
- Widerstandpunktschweißen (1)
- Windkanal (1)
- Wood preservation (1)
- Workflow (1)
- X-Ray Diffraction (1)
- X-ray Computed Tomography (1)
- X-ray Diffraction (1)
- X-ray computer tomography (1)
- X-ray diffractometry (1)
- X-ray imaging (1)
- X-ray interferometry (1)
- X-ray scattering (1)
- X-ry Diffraction (1)
- XAS (1)
- Yb(III) (1)
- Yellowing (1)
- Young's modulus (1)
- Young´s modulus (1)
- Zahnmedizin (1)
- Zelluläres Polypropylen (1)
- Zement (1)
- Zementgebundene Baustoffe (1)
- Zentrifugentechnologie (1)
- Zeolite (1)
- Zersetzungsgasanalyse (1)
- Zerstörungsfreie Prüfung (1)
- Zinc and galvanized samples (1)
- Zirconium (1)
- ZnSe (1)
- Zonation (1)
- Zugversuch (1)
- Zuverlässigkeit (1)
- Zünder (1)
- additive manufacturing (1)
- aggregation-induced dual emission (AIDE) (1)
- bioimaging (1)
- burst test (1)
- cocrystal (1)
- creep behaviour (1)
- dangerous goods packagings (1)
- depth-profiling (1)
- excess isotherms (1)
- excitation power density (1)
- extreme temperature (1)
- fluorine (1)
- gas adsorption (1)
- gas solubility (1)
- high-resolution camera (1)
- hybrid repair (1)
- ionic liquids (1)
- life cycle test (1)
- low energy electrons (1)
- mechanochemistry (1)
- milling (1)
- pH probe (1)
- pH sensing (1)
- polyethylene terephthalate (1)
- porous solids (1)
- position detection (1)
- powder bed fusion of metals utilizing a laser beam (1)
- ssDNA (1)
- stress cracking resistance (1)
- test methods (1)
- µ-FTIR (1)
- µ-Raman (1)
- µ-XRF (1)
- µCT (1)
- Örtliche Korrosion (1)
- β-cristobalite structure type (1)
Organisationseinheit der BAM
- 6 Materialchemie (203)
- 5 Werkstofftechnik (97)
- 8 Zerstörungsfreie Prüfung (95)
- 6.3 Strukturanalytik (65)
- 8.5 Röntgenbildgebung (60)
- 6.6 Physik und chemische Analytik der Polymere (55)
- 9 Komponentensicherheit (53)
- 1 Analytische Chemie; Referenzmaterialien (45)
- 6.1 Oberflächen- und Dünnschichtanalyse (44)
- 4 Material und Umwelt (36)
Eingeladener Vortrag
- nein (1)
Time- and space-resolved in situ LIBS measurements of chemical compositions during TIG-welding
(2017)
An in situ monitoring of chemical compositions in the weld pool and the heat affected zone (HAZ) can enable the control of the welding process through the regulation of the welding parameters, and thus can prevent possible weld defects.
The most critical parameter for hot cracking -from a metallurgical point of view- is the chemical composition of the weld pool.
Chemical composition can be measured and quantified during the welding process with the LIBS technique having the appropriate calibration measurements.
Fluorescence microscopic and spectroscopic monitoring of degradation processes upon polymer ageing
(2017)
The majority of all routinely used methods to assess polymer aging are based on destructive tests and methods. Early indicators for the deterioration of polymer materials are e.g., physical or mechanical properties like tensile strength, adhesion, brittleness, and color. It is well-known, however, that predominantly chemical changes are the underlying process of the physical changes that occur in organic materials upon aging over time. Typical initial steps during polymer degradation are crosslinking or chain breaking, alteration of autofluorescence, “yellowing” or bleaching caused by the formation of new functional groups. A straightforward strategy towards the sensitive detection and monitoring of chemical changes in the course of polymer aging is based on non-destructive optical measurements. Luminescence techniques, one of the most sensitive spectroscopic methods are the method of choice. Here, we present first results of luminescence-based monitoring of polymer degradation induced by different environmentally relevant weathering factors (e.g. humidity and UV exposure). Our studies include fluorescence spectroscopy as well as spectral scanning confocal fluorescence microscopy and clearly demonstrate the possibility to follow accelerate-aging processes by luminescence detection.
Metallic springs undergo oxidation and creep at elevated temperatures and their use is limited to temperature of about 650°C. Therefore, there is a need for stable materials which can easily withstand temperatures up to 1000°C for long periods in different atmospheres. Ceramic materials have been drawing attention due to their excellent properties. This work aimed at investigating the high-temperature stability of zirconia and alumina ceramic springs at elevated temperatures under different atmospheres (air, N2 and H2) in order to determine the limitation of use of these ceramic springs.
The synthesis of hybrid inorganic/organic copolymers, using reversible deactivation radical polymerization (RDRP) techniques, has been an intensively studied research topic over recent years. A plethora of hybrid inorganic/organic copolymers were synthesized, including hybrid inorganic/organic block copolymers as well as random copolymers,[1–4] that showed great potential in fabricating hybrid (nano)materials with tailored properties [5]. Two widely employed RDRP techniques to prepare such hybrid inorganic/organic copolymers are atom transfer radical polymerization (ATRP) [1,2] and reversible addition-fragmentation chain transfer (RAFT) polymerization [3,4]. In order, to afford hybrid inorganic/organic copolymers with narrow dispersity, high conversions and precise structures, it is required to choose proper reaction conditions. Due to the importance of both ATRP and RAFT in the preparation of such hybrid polymers, we aim to compare both RDRP techniques by preparing 2-acetoxyethyl methacrylate (AcEMA) and 3-(triethoxysilyl)propyl methacrylate (TESPMA) based homopolymers. For this purpose, AcEMA and TESPMA were polymerized in 1,4-dioxane at 60 °C mediated by CuBr/N,N,N',N'-pentamethyldiethylenetriamine (PMDETA) and 2-(2-carboxylethylsulfanylthiocarbonyl-sufanyl) propionic acid (TTC) as well as cumyl dithiobenzoate (CDB) to evaluate the suitability and reliability of ATRP and RAFT to prepare such hybrid (co)polymers.
Polyurethanes (PU) are formed by polyaddition reaction between diols and diisocyantes. They can be formed utilizing three building blocks, namely a polyol or long-chain diol, a chain extender or short-chain diol, and a diisocyanate. The derived multi-phase block copolymer has thermoplastic properties and is called thermoplastic PU (TPU). This modular approach allows for a variety of alternations yielding a broad range of structural properties and applications. TPUs are based on three main classes of polyols, i.e. polyethers, polyesters, and polycaprolactones. With these different polyols and the ability of changing the ratio of building blocks a variety of material properties can be obtained thus TPUs find numerous applications in e.g. lightweight construction1, insulation, flame retardants, lacquer and glue, as well as medicine.
Linear, isocyanate terminated, polyurethane prepolymers prepared from non-equivalent amounts of diisocyanate such as methylene diphenyl diisocyanate (MDI) attached to a polyol are widely used as precursors of the correspondent polymers. Chain-extending reactions with low molecular weight compounds bearing different amounts of active hydrogens enable both linear and crosslinked polyurethane to be formed.
Due to TPUs being used in a broad range of applications facing a variety of stress (e.g. mechanical, hydrolytic, thermal, radiative/UV, as well as its combinations) the complexity of possible degradation mechanism is high. A functional group derived from degradation of the bulk matrix can be detected utilizing a suited fluorogenic sensor molecule. There are several fluorogenic dyes known for the application as sensor for amine groups e.g. fluorescamine, pyrylium dyes, deriving a fluorescent signal upon reaction.
One of today’s major problems in many technical plants as well as fuel tanks is Microbial induced corrosion (MIC), leading to considerable damage and huge financial losses. Successful prevention of MIC requires the localization of first signs of corrosion as well as the identification of factors influencing the corrosion process. Hence, there is a growing need for sensitive and preferably inexpensive tools that enable the early detection of MIC. Of utmost importance are methods, which provide spatially and time-resolved information and allow the determination of corrosion rates at sites of interest for possible prevention of MIC.
Experimental study on M23C6 nucleation and growth mechanisms in Ni-base superalloy single crystals
(2017)
The addition of carbon to Ni-base superalloy single crystals has been increasingly carried out to improve low angle grain boundary (LAGB) resistance and castability. Consequently, the precipitation of carbides is highly probable during long-term application of components subjected to higher temperatures (> 1000 °C). While the view on the role of carbides as strengthening or detrimental is polemical, their inevitable increased presence in carbon-doped alloys must be addressed. In the present work, the evolution of M23C6 carbides forming in the commercial grade Ni-base superalloy LEK 94 during high-temperature and low-stress creep exposure is assessed. Although carbon is not intentionally added to the LEK 94 alloy, it admits up to 0.1 at. %, which together with the high content of M23C6-forming transition metals, leads to their precipitation. The precipitation is induced here during creep experiments at 1020 °C and a nominal applied stress of 160 MPa along [001]. The correlation of precipitation and external load is carried out by evaluating the carbides in the gage section of parallel and circularly notched cylindrical samples, as well as in their heads. Characterization is made by transmission electron microscopy (TEM). Although primary MC carbides form mostly in interdendritic regions during casting, high temperature exposure induces M23C6 carbide nucleation especially in the γ phase of dendritic regions, where a stronger partitioning of refractory elements is present. The carbides have a needle shape with their main axis on 〈100〉 and a cube-on-cube orientation relationship. They present incoherent {100} facets along their elongated region and semi-coherent {111} facets at their ends. Their nucleation and growth mechanisms are discussed based on microstructural observation under different experimental conditions.
Zur Vermeidung der schädigenden Alkali-Kieselsäure-Reaktion in Betonbauwerken wird die Alkalireaktivität von Gesteinskörnungen im Vorhinein getestet. Der 60°C-Betonversuch ermöglicht eine vergleichsweise schnelle Einschätzung nach fünf-monatiger Testzeit. Dazu wird die Dehnung von Betonprüfkörpern, die mit der zu testenden Gesteinskörnung hergestellt wurden, manuell alle 28 Tage gemessen. Ein alternatives, an der BAM in den vergangen Jahren entwickeltes Verfahren setzt Dehnungssensoren ein, um kontinuierlich und online zu messen. Die Dehnungskurven sind eine gute Grundlage sowohl für die Prognose vom Expansionsverhalten während des Tests als auch für die Validierung von Expansionsmodellen.
The interest in porous anodic aluminum oxide (AAO) has been rapidly growing due to its numerous applications in separation, catalysis, energy generation and storage, electronics, and sensors. From the scientific point of view, AAO is a topical interest in soft matter fields. Spatial confinement of soft matter in nanoporous media influences its structure, thermodynamics, and mobility. Embedding polymers and liquid crystals into nanopores of AAO results in a 2D nanoconfinement of these materials. This confinement affects their properties, compared to the bulk, such as phase transition temperatures and enthalpies, molecular mobility, and architecture of the crystallization. On the other hand, discotic liquid crystals (DLCs) are a promising class of soft matter for electronic applications. This is due to their ability to organize and stack themselves into columns in a hexagonal columnar mesophase, a mesophase in between the plastic crystalline and isotropic phase, driven by the overlap of the π orbitals of their aromatic core. This leads to a high charge-carrier mobility along the column axis. Further, these columns could then be considered as “molecular nanowires”. In this study, 2,3,6,7,10,11 hexakis[hexyloxy] triphenylene (HAT6), a triphenylene based DLC, was confined into nanoporous AAO membranes. The structure, dynamics and the phase behavior of the confined HAT6 were investigated by broadband dielectric spectroscopy (BDS) and differential scanning calorimetry (DSC). HAT6 was embedded into nanoporous AAO membranes by melt infiltration in the isotropic phase under argon atmosphere. The membranes have parallel aligned cylindrical nanopores, with pore diameter of 10, 20, 25, 40, 80, 120 and 180 nm. The filling degree for each sample was checked by thermogravimetric analysis (TGA) in order to ensure complete filling. Bulk HAT6 forms a hexagonal columnar phase; in between the isotropic phase above 371 K and the plastic crystalline phase below 340 K. Unlike the bulk, the confined HAT6 split the plastic crystalline-to-hexagonal columnar phase transition in two, which might be interpret as two different phase structures; close to the wall and at the pore center. Moreover, the isotropic-to-columnar transition of the confined HAT6 shifted, with decreasing pore diameter, to lower temperatures. Furthermore, pore surfaces of a series of membranes were chemically modified, resulting in a more hydrophobic pore surface than the unmodified ones. HAT6 was embedded into the modified membranes by the same aforementioned preparation. The influence of the changed host-guest-interaction, on the structure, dynamics, and the phase behavior of HAT6 confined in the modified membranes, was also investigated by BDS and DSC.
Upconversion nanoparticles are characterized by their ability to convert low energy near-infrared excitation in high energy emissions in the visible range. This is enabled by sequential absorption of two or more photons via energy transfer from the sensitizer lanthanide ion Yb3+ to an activator lanthanide ion, e.g. Er3+. Yb3+ sensitation has the advantage of 980 nm excitation achieved by commercial available low power cw laser modules.
Nevertheless, for some applications, especially in aqueous media, which is predominantely in bioanalytical applications, there is the drawback of a local Absorption maximum of water at this wavelength. Sample heating can occur, and excitation power density is strongly distance dependent.
To overcome this issue, the idea is to shift the excitation wavelength to 808 nm. This can be achieved by a tandem-excitation using Nd3+ and Yb3+ ions. Nd3+ gets excited by 808 nm irradiation and transfers the energy to Yb3+, which triggers the upconversion emission of the Er3+ ions. Therefore, it is mandatory to separate Nd3+ and Er3+ by core-shell architecture for reducing the energy backtransfer from Er3+ to Nd3+.
To further enhance the upconversion luminescence an additional inert shell formed by the host material NaYF4 reduces the quenching effects caused by surface defects and dangling bonds.
By means of an effective medium (EMA) based approach, it is possible to use spectroscopic ellipsometry to determine the mixing ratios between air and material in porous dielectrics and calculate a quantitative value of the porosity for these materials. As this method is model-based, it is very difficult to provide a quantitative measure for the accuracy of porosity values determined by this method. Valuable additional information can often be obtained by combining ellipsometry with other complementary methods. In the present study, the ellipsometry results were validated by Electron Probe Microanalysis (EPMA) with the option of layer analysis (by the socalled “STRATAGem” approach), gravimetry, and electron microscopy. We analysed porous TiO2 thin layers synthesised by means of a template synthesis Approach (evaporation induced self assembly).
Ellipsometry measurements on porous samples are difficult to analyse due to the complexity of the models necessary. Often it is difficult to decide if the measured data contains enough information to successfully determine the target quantities (mixing ratio, dielectric function of the matrix material). One method to decrease the complexity of the fit and therefore use the measurement data most efficiently is a multi-sample analysis. In the present case, multi-sample analysis was used for determining the porosity factors of the individual layers while using one common set of dielectric function values for the matrix in all cases.
While the results of the fit analysis in this case can be used to show the feasibility and also the limitations of the multi-method approach, the porosity values themselves show a promising agreement between the Independent methods. It can therefore be concluded that determining porosity values with ellipsometry is in accordance to other methods to the level of accuracy provided by the complementary methodologies.
Chemical admixtures like superplasticizers or stabilizing agents are of ever increasing importance for modern concrete technology. Although such admixtures have meanwhile become common practice in many applications of concrete technology, the understanding of these highly complex systems is still limited and the relevant parameters, which predominantly control the interaction between the superplasticizer and the cement components, have not been identified yet.
Optical methods have been successfully used for the analysis and monitoring of the interactions between a broad variety of nanoscale and molecular systems like nanoparticles of various chemical composition and different types of organic ligands or biomolecules. This encouraged us to assess the potential of these methods, and particularly reflectance and fluorescence measurements, for the study of the interactions that occur at the interface between particle or hydrate surfaces and the fluid phase at a very early stage of concrete formation. Special emphasis is dedicated to search for and identify differences between commonly used superplasticizers.
Here, we focus on hydration effects using commercial comb shape polycarboxylate ethers (PCEs) with different charge densities, which are known to allow a very low water/cement ratio (w/c of 0.20 or less) while maintaining good workability. Based upon changes of the intensity of the reflectance and fluorescence signal and spectral effects of a dye, acting as optical reporter, a model for the interactions of dye, PCE molecules and cement nanoparticles in the very first phase of cement hydration is derived
The results are based on data1. Figure 3 displays temperatures of the tank wall and of the gas phase over testing time. It can be seen that a complete coating strongly delayed the heating of tank wall and gas phase, whereas the partly coated tanks only had a minor influence on temperature development. There was no significant difference between a half coated and a thirdly coated tank measurable. Figure 4 shows the internal pressure of tanks over testing time. Only the fully coated tank enabled a low pressure over 90 min testing time. Hence, a complete coating is necessary to guarantee the fire safety of hazmat tanks and a partly coating is not sufficient.
Spray drying based granulation processes aim for flowable granules neither containing voids nor hard shells thus leading to a homogenous microstructure in the green and sinter bodies without strength reducing large pores. The increase of the specific surface area due to the utilization of finer powders as raw materials makes the production of granules of demanded quality more sophisticated. Innovations regarding additives as well as process engineering are therefore required.
While conventional spray granulation processes of ceramic materials are based on rotational, one stream or two stream nozzles for nebulization, the investigations in the ZIM project concentrate on the applicability of an ultra sound atomizer unit. A spray dryer comprised of the aforementioned ultra sound atomization unit implemented in a commercial spray dryer (Niro, Denmark) was used as test system. Potential advantages of the ultra sound nebulization are investigated for model systems of alumina, zirconia and a ZTA composite while focusing on solids content, yield, pressability and granule properties (size, size distribution, flowability, shape and microstructure) as well as the final sinter body properties (density, microstructure and flexural strength).
First ultra sound spray drying experiments yielded granules with excellent processability. Spray drying of identical slurries, as before tested and optimized for a two stream nozzle atomization process, resulted in a more suitable size distribution for dry pressing (less particles below 20 µm) and a higher yield. Furthermore, sinter bodies produced of ultra sound granules seem to have less large pores and a more homogenous microstructure
Additive manufacturing (3D printing) of ceramics and other materials offers significant advantages compared to conventional production processes for several applications. While ceramics have been extensively investigated in this regard, additive manufacturing of geopolymers have received much less attention to date. In the present contribution we study a ‘standard’ metakaolin-based geopolymer, a fly ash-based geopolymer and a silica-based one-part geopolymer regarding their suitability for additive manufacturing via selective laser curing. Model geometries such as bars and cuboids could be produced by this route. After selective laser curing the specimens were additionally cured at 80 °C for 24 h. The specimens were studied by means of scanning electron microscopy (SEM) and powder X-ray diffraction (XRD). SEM showed that the precursors in all geopolymers had reacted partially and geopolymeric gel had formed. XRD confirmed these results and additionally revealed that the crystalline byproducts (zeolites) in the one-part geopolymer differed from the byproducts observed in conventionally produced samples. This indicates that also the geopolymerization reactions differ between the two synthesis routes. The mechanical strength after selective laser curing and 80 °C-curing appeared to be highest for the metakaolin-based geopolymer. However, SEM also showed that a significant volume of macropores remained in most regions of all specimens, while some regions in the metakaolin-based geopolymer appeared to be significantly denser. These preliminary results demonstrate that selective laser curing offers potential for the production of geopolymers, but more research has to be undertaken to optimize the process.
Einfluss des Schwefelgehalts auf die Korrosionsbeständigkeit des nichtrostenden Stahls 1.4404
(2016)
Die Korrosionsbeständigkeit nichtrostender Stähle wird maßgeblich von ihrer chemischen Zusammensetzung bestimmt. Der tendenzielle Einfluss ist für die Hauptlegierungselemente in der wissenschaftlichen Fachliteratur beschrieben. Bei Begleitelement Schwefel gibt es dagegen keine konkreten Untersuchungen die belegen, ab welchem Gehalt mit einer Verringerung der Korrosionsbeständigkeit zu rechnen ist. Im Lichtbogenschmelzofen wurden verschiedene Legierungen mit abgestuftem Schwefelgehalten hergestellt, um den Einfluss dieses Begleitelementes auf die Korrosionsbeständigkeit systematisch zu untersuchen. Die KorroPad-Prüfung und die Bestimmung kritischer Lochkorrosionspotentiale wurden zur Charakterisierung der Legierungen genutzt. Beide Methoden belegen eine zunehmende Verringerung der Lochkorrosionsbeständigkeit mit dem Schwefelgehalt.
Die Korrosionsbeständigkeit geschweißter Konstruktionen aus nichtrostenden Duplexstählen wird von den Schweißparametern und der Nachbehandlung der Oberflächen bestimmt. Eine etablierte Methode der Schweißnahtnachbehandlung ist das Strahlen der Oberfläche mit Glasperlen. Diese Methode soll aus wirtschaftlichen Gründen durch das Strahlen mit Korund ersetzt werden, welches deutliche Zeit- und Kostenvorteile bietet. Besonders bei der Lochkorrosionsbeständigkeit hat sich das Schleifen mit Korund bereits als nachteilig erwiesen, weshalb diese Umstellung auch beim Stahlen kritisch hinterfragt wird. Daher wurden Probeschweißungen bei der Firma Modersohn hergestellt und mit verschiedenen Oberflächenbearbeitungsmethoden (Glasperlenstrahlen, Korundstrahlen, Beizen, Elektropolieren, Schleifen) nachbehandelt. Diese verschiedenen Oberflächenzustände wurden analytisch (REM, Rauheit) charakterisiert und hinsichtlich ihrer Lochkorrosionsbeständigkeit vergleichend untersucht werden, um die Eignung des Strahlens mit Korund zu beurteilen.
Martensitische nichtrostende Stähle werden in verschiedenen technischen Bereichen eingesetzt, bei denen eine optimale Kombination aus hoher mechanischer Festigkeit und guter korrosiver Beständigkeit gefordert wird. Beide Eigenschaften werden in der Industrie primär durch die Wärmebehandlung gesteuert. Die Korrosionseigenschaften sind dabei stark von der diffusionsbedingten Bildung und Auflösung von Chromkarbiden abhängig. In vergangenen wissenschaftlichen Arbeiten konnte nachgewiesen werden, dass die Abkühlgeschwindigkeit nach dem Austenitisieren einen großen Einfluss auf die Bildung solcher Karbide hat. Der Einfluss der Abkühlgeschwindigkeit auf die Lochkorrosionsbeständigkeit wurde an den Stählen 1.4108 und 1.4116 systematisch untersucht. Mit Hilfe des Stirnabschreckversuches wurde dabei die Abkühlgeschwindigkeiten variiert und anschließend die Veränderung von Gefüge, Lochkorrosionsbeständigkeit und Härte untersucht. Als Ergebnis konnten kritische Abkühlgeschwindigkeiten ermittelt werden, bei denen eine kritische Verringerung der Korrosionsbeständigkeit einsetzt.
Renewable resources become more and more relevant to maintain energy demands for an increasing global population. Biosynthetic fuels like biodiesel might replace conventional petrochemical fuels. In this study the influence of microbial growth on biodiesel and diesel on the storage tank systems were investigated. Polymeric fuel storage tanks for diesel and biodiesel provide suitable environmental conditions for a broad spectrum of fungi and various bacteria, including cyanobacteria and aerobic heterotrophic, and even anaerobic, fermentative Bacteria. However, the questions whether and how ageing of the materials is affected by biofouling processes have not been answered so far. Therefore, a model system for biofilm formation was established to study the initial attachment phase of bacteria in dependency of ageing, quality and surface modification of thermoplastic polymers used for storage tank systems. The microbial survey is closely connected with a detailed characterization of the material’s properties and its ageing processes.
A widely applied plastic used for fuel storage tanks is high-density polyethylene (PE-HD), which is available with various additives to increase UV-light stability and even for the storage of biodiesel. These materials were aged under UV-light and temperature using a defined climate chamber set-up. Further, the repeated filling of fuels was mimicked for such storage tanks, as this has an important impact on the life-cycle length for the storage Container. The aged polymers showed a significant change in the material’s characteristics, including surface characteristics (e.g. hydrophobicity) and carbonyl groups. The effect of the changed material properties on the biofilm formation are studied using bacterial isolates, previously obtained from a “dieselpest”, and as a model-reference E. coli. The unaged polymers showed already some significant differences for the initial attachment of E. coli K12. Polyethylene with additives was colonized faster than the reference material (without additives) although the final biofilm coverage was not impaired. Likewise, the settlement of a kerosene-isolated Bacillus species on the unaged materials independently of additives was only minor interfered.
In future, our results should give stakeholders in industry and public authorities a better estimation of the life-cycle security for fuel storage tank systems and on the fuel quality. Further, our results could help to test and develop new materials or additives to prevent biofouling processes.
Polynuclear aluminium species (Al13 keggin cluster) find application in different areas like water purification, contaminant transport, and as pilling clays with high specific surface areas, due to their strong binding ability to aggregates and high positive charge.
In the present contribution, we report on the in situ investigation of the Al13 sulfate synthesis by synchrotron wide-angle X-ray scattering (WAXS). Al13 cluster were crystallized by precipitating hydrolyzed aluminum solutions by the addition of sodium sulfate. The measurements were performed using a custom-made acoustic levitator as sample holder. The study provides information about the intermediates during the crystallization process. From the data, a mechanism was derived indicating the influence of the crystallization process.
We report on the in situ investigation of the Al13 sulfate synthesis by WAXS. Al13 sulfates were crystallized by precipitating hydrolyzed aluminum solutions by the addition of sodium sulfate. The measurements were performed using an acoustic levitator. The study provides information about the intermediates during the crystallization process.
Selective Electron Beam Melting (SEBM) is a promising powder bed Additive Manufacturing (AM) technique for near net-shape manufacturing of high-value titanium components. However, as with every emerging technique, the manufacturing processes can still be greatly improved and optimised. In particular, the links between AM settings and the resulting sample porosity is of great interest, as the fatigue life of SEBM parts is currently dominated by the presence of porosity. In this study, the size, volume fraction, and spatial distribution of the pores in model samples have been characterised in 3D, using X-ray Computed Tomography (CT), and correlated to the SEBM process variables. A strong relationship was found with the different beam strategies used to contour, and infill by hatching, a part section. The majority of pores were found to be small spherical gas pores, concentrated in the infill hatched region. Rarer irregular shaped pores were mostly located in the contour region and have been attributed to a lack of fusion between powder particles.
Additive Manufacturing by Selective Laser Melting (SLM) offers ample scope for producing geometrically complex parts as compared to the traditional subtractive manufacturing strategies. However, the residual stresses (RS) developed during the processing can reduce the load bearing capacity as well as induce unwanted distortion, limiting the application of SLM parts. In the present work, residual stresses in additivly manufactured IN718 part were analised by means of neutron diffraction and synchrotron X-ray diffraction.
In this study a metal-matrix-composite with aluminum matrix and Al2O3 particles was investigated with x-ray refraction topography and in-situ tensile loading. It could be observed that after reaching a certain load the specific surface increased steadily. However, the classical radiographs taken for comparison show no damage in the sample.
We investigated the efficiency of phase gratings, i.e., the visibility upon variation of different parameters. Rotating around an axis parallel to the grid lines of the phase grating changes the grating’s shape and thereby the initial distribution of phase shifts. This yields high visibilities for shorter propagation distances than derived from box shapes. Tilting the grating in the scattering plane allows continuous tuning of the grating’s height that corresponds to an ideal phase shift for a particular photon energy. This opens the way for tuning the design energy suitable for the material under investigation. Our study included simulations for monochromatic sources with the sampling procedure for rectangular and triangular phase gratings.
Elastic wave propagation of ultrasound in bituminous road surfaces – simulations and measurements
(2015)
Maintenance costs of road infrastructure are increasing steadily. Adverse environmental impacts on infrastructure get more and more important as well. Therefore, it is important to determine how limited financial resources can be directed with an optimum pay-out. The present study takes first steps towards the usage of low-frequency ultrasound as a tool to evaluate the road condition.
We investigated the efficiency of phase gratings, i.e., the visibility upon variation of different parameters. Rotating around an axis parallel to the grid lines of the phase grating changes the grating’s shape and thereby the initial distribution of phase shifts. This yields high visibilities for shorter propagation distances than derived from box shapes. Tilting the grating in the scattering plane allows continuous tuning of the grating’s height that corresponds to an ideal phase shift for a particular photon energy. This opens the way for tuning the design energy suitable for the material under investigation. Our study included simulations for monochromatic sources with the sampling procedure for rectangular and triangular phase gratings.
We report on the in situ investigation of mechanochemical syntheses of metal phosphonates. The metal phosphonates are formed in milling reactions starting from a metal acetate and a phosphonic acid. The conversions are observed by synchrotron PXRD and Raman spectroscopy to shed light on the reaction mechanisms including possible intermediates.
We present an in situ investigation of the mechanochemical formation of cocrystals using synchrotron XRD and Raman spectroscopy. This combination allows to study milling processes on the level of the molecular and crystalline structure thus obtaining reliable data for mechanistic studies. Thereby, mechanochemical syntheses can be optimized to isolate new crystal structures.
Characterization of residual stress state by neutron diffraction and residual magnetic field mapping
(2016)
Based on the residual stress characterization of tungsten inert gas welded S235JRC+C plates by means of neutron diffraction, the evaluation of residual stress with high spatial resolution GMR (giant magneto resistance) sensors is discussed. The experiments performed indicate a correlation of residual stress changes and local residual magnetic stray fields.
Additive Manufacturing (AM) by Selective Laser Melting (SLM) offers ample scope for producing geometrically complex parts as compared to the traditional subtractive manufacturing strategies. However, the residual stresses developed during the processing can reduce the load bearing capacity as well as induce unwanted distortion, limiting the application of SLM parts.
IN718 manufactured by SLM process can show high tensile residual stresses in the surface as high as the yield strength of the wrought alloy. On the other hand, residual stresses in the bulk Show considerably lower stress values, even in compression, indicating a stress re-distribution during deposition of the SLM layers.
Selective Laser Melting (SLM) technique allows to produce parts with complex geometry. Due to the rapid solidification and heat gradient during production, SLM results in presence of residual stress. The present study shows the influence of manufacturing parameters on surface residual stress of Ti-6Al-4V SLM parts. High tensile stresses in the front surface are found. Heat Treatment conditions relax residual stresses almost to zero. High scanning speed during manufacturing results in higher tensile stresses in the surface.
Ermüdungsverhalten, Lebensdauer und Schädigungsprozesse von P92 unter zyklischen Betriebsbedingungen
(2016)
Schnelle Lastwechsel mit hohen Temperaturgradienten führen zu thermischen und mechanischen Beanspruchungen v.a. in dickwandigen Bauteilen. Daraus ergibt sich ein komplexes Lastkollektiv, bei dem der Werkstoff sowohl durch Kriechermüdung als auch durch thermomechanische Ermüdung (TMF) geschädigt wird. Welche Auswirkungen hat eine gleichzeitige Änderung von Temperatur, mechanischer Beanspruchung und Arbeitsmedium auf die Schädigungsprozesse?
Were prepared four unsubstituted Pc - C60 fullerene systems, using two different synthetic strategies, via Prato (1,3 - dipolar cycloaddition) or Bingel reactions. The precursor Pcs 1 and 2 were successfully synthesized by cyclotetramerization reaction between TBDPS - protected and unsubstituted phthalonitriles. The surface studies are currently ongoing.
Ethylene-propylenene-diene copolymer rubbers (EPDM) are used in a wide range of sealing applications e.g. in automotive industry or in containers for dangerous goods. Investigations with regard to the ageing behavior and lifetime prediction of commercial EPDM rubber seals consisting of 48 % polypropylene (PP) and 4.1 % of 5-ethylidene-2-norbornene (ENB) were conducted [1]. However, structural parameters (monomer ratio, diene type, curing agent etc.) and additives (filler, plasticizer etc.) are known to affect the ageing behavior of rubber compounds [2, 3]. The aim of the current study was to elucidate the influence of each component on the overall deterioration of material properties after thermal ageing. Therefore, different EPDM mixtures were prepared at BAM, the reference being an EPDM with 48 % PP and 4.1 % ENB reinforced with Sillitin. Five more formulations were prepared in order to assess the effect of (i) filler type (carbon black or sillitin), (ii) curing agent (sulfur or peroxide), (iii) plasticizer, (iv) ethylene-propylene ratio and (v) ENB content. Initially, the properties of the unaged materials were investigated by tensile testing, hardness and density measurements, TGA, DSC and DMA. Sulfur vulcanization resulted in higher elongation at break due to the flexibility of the sulfidic crosslinks. Carbon black resulted in better reinforcement compared to Sillitin. A higher ethylene and ENB content lead to higher hardness due to higher crystallinity and higher crosslink density, respectively.
Thermal ageing for up to 30 days (with 10 days intervals) took place in circulating hot air ovens at 125 °C. Pronounced crosslinking was found to take place in all peroxide-cured materials, as the unreacted double bonds of the ENB units acted as starting points for oxidation and crosslinking. Increasing the ethylene content resulted in an increase in the ageing resistance of EPDM. This improvement was attributed to the higher crystallinity that inhibits oxygen diffusion and to the smaller number of chain scissions which occur in the PP units. Although significant loss of the plasticizer was observed, the remaining plasticizer adequately improved the tensile properties of the material. The filler type did not significantly affect the ageing behavior of EPDM. Finally, the lower thermal stability of the sulfidic crosslinks resulted in desulfurization and, thus, in an increase in the crosslinking density.
To sum up, it has been shown that the monomer composition, curing agent and additives used in EPDM formulations greatly influence the properties and ageing resistance of these materials.
Bei der Bewertung der Verlässlichkeit der im Labor gewonnenen Prüfergebnisse spielen Ringversuche eine entscheidende Rolle. Die Bundesanstalt für Materialforschung und -prüfung (BAM) unterstützt deshalb den weiteren Ausbau des Ringversuchsprogramms des im Jahr 2007 gegründeten Kompetenzzentrums zur Qualitätssicherung für Prüfungen von Gefahrgütern und Gefahrstoffen auf physikalische Gefahren (Centre for quality assurance for testing of dangerous goods and hazardous substances, CEQAT-DGHS).
Bei allen bisher untersuchten Prüfmethoden besteht ein Verbesserungsbedarf. Die RV müssen daher zunächst auf die Methodenentwicklung, -verbesserung und -validierung abzielen und nicht auf Leistungstests.
Application of 4Q-BSE detector and dedicated software enables 3D surface measurements of fracture samples in SEM. 3D surface measurement is independent from magnification and material invariant. Quantitative height measurements require careful detector adjustment and system calibration. Live 3D view allows a fast assessment of topographical features. In addition to SE and BSE imaging, 3D surface data help to analyse and interpret fracture samples.
Pressurisation of full-containment pressure vessels in fire is known to be driven by thermal stratification. The predominant mode of heat transfer to the contents (convection from the shell to the liquid phase) results in formation of „hot“ boundary layers. Sub-cooled boiling may also be present. The warm layer rises to the surface through buoyancy and bubble flow, increasing the surface of the liquid above that of the bulk temperature, and hence driving a pressure rise.
For reliable prediction of the complex effects governing vessel pressurization a three-dimensional numerical model is required. Work is being undertaken on such a model by other institutions in cooperation with this project.
The arrangement of the measuring sensors allowed the
capture of air flow induced temperatures and material
temperatures on various points of the cylinder body. Four
significant temperature levels could be observed: Inside the cylinder (far from the wall, close to the wall), inside the aluminium liner and outer surface. Figure 5 shows the temperature distribution after a regular filling process with a filling time of ten minutes. The temperature sensors T1 - T9 are marked with different colors. The corresponding measurement points are shown in Figure 4. Due to the high thermal conductivity of the aluminum liner the induced temperature peaks are quickly derived. A flow-induced exceeding of the maximum approval temperature is not expected. Regarding the safety assessement the results show that the pressure and temperature profilesmustbe taken into account.
A new tank design for Hazmat
(2016)
Initial studies have shown pre-deformed honeycomb structure
pressure vessels to have comparable burst pressure to straight steel vessels.
It was shown that honeycomp structured tanks have a higher energy absorption than straight steel tanks.
Future studies will investigate optimization of the deformed plate, to determine if increased payloads or a reduced wall thickness can be achieved.
Mg-Y,RE-Zn systems present second phases with high thermal stability, promoting the increase of strength and creep resistance at high temperatures.
Mg and its alloys have a potential application as biomaterials due to their biocompatibility and degradation behaviour. The dominant corrosion mechanism in those alloys is the microgalvanic corrosion through coupling of the more noble second phases with the Mg matrix, and therefore a low concentration of those was sought.
In order to reduce CO2 emissions fossil fuelled power stations with high combustion efficiency are being developed. The increase of the operating temperature, a common way to improve combustion efficiency, leads to enhanced corrosion of heat exchange steel tubes in the power plants. Within the framework of the European project “Production of Coatings for New Efficient and Clean Coal Power Plant Materials” (POEMA)", high temperature corrosion protection coatings are now under investigation.
Thin porous sol-gel alumina films are promising candidate coating materials. Coatings were prepared by applying boehmite sols on grinded steel P92 and subsequent heat treatments at temperatures up to 650 °C. Thus a porous layer of worm-like particles was formed consisting of nano-crystallites and amorphous alumina. A dense interface with satisfying adhesion resulted from diffusion of chromium and iron ions out of the steel into the porous coating. However, the film locally exhibited some cracks caused by steep edges in the grinded steel surface. An appropriate substrate pretreatment should avoid this problem.
The protection of the steel relies on the barrier function of the alumina coating and the formation of a dense chromia layer at the steel surface.
As subcritical crack growth (SCCG) can reduce tensile strength of glasses by many orders of magnitude, the potential for improvement of fatigue behaviour is most intriguing in developing ultra-strong glasses. An essential bottleneck is the basic understanding of the numerous interplaying pressure-, temperature- and water-affected relaxation phenomena at the crack tip and related toughening strategies. Therefore, the present project aims to advance the basic understanding of structural relaxation effects and local properties caused by increased water concentration and tensile stresses at the crack tip as they are a key for structural toughening designs to develop SCCG-free glasses and glass surfaces.
Our first studies give clear evidence that glass structure and dynamics is strongly modified upon hydration of glasses. These changes are highly related to the nature of network formers but are affected as well by the counter ions (network modifier). Results of the 1st project part suggest that structural relaxation below glass transition temperature, i.e. overlapping of short-range (beta) and long-range (alpha) interactions can contribute to SCCG in water-free environments and that structurally dissolved water in the glasses can have decisive impact on this effect.
In the 2nd project stage specific glasses compositions will be investigated to gain an improved understanding on the relation of sub-Tg relaxation and inert SCCG as well as to shed light to the related effects of dissolved water and its speciation. These glasses cover a broader range of different glass topologies and binding partners, whereby the coupling of alpha and beta relaxations is varied systematically by alkali-, alkaline earth ions and water species concentrations. Preparation of hydrous glasses (up to 8 wt% water) will be performed by high pressure syntheses. Structure will be resolved by NMR, Raman and IR spectroscopy while structural relaxation is accessed in the temperature and frequency domain using dynamic mechanical spectroscopy and ultrasonic damping. We will focus on measurements of inert SCCG (region III) conducting experiments in vacuum and dry gas atmospheres using indentation techniques and stressing of glass specimens in DCB geometry.
Experimental data on SCCG will be provided to SPP groups, which deals with fatigue in metallic glasses and vice versa we will test theoretical predictions of ab-initio simulations of partner within SPP 1594 in order to quantify the effect of water on the crack tip. In summa topological factors controlling the subcritical crack growth with respect to water will be identified from which structural toughening designs for highly fatigue resistant-glasses can be derived.
We investigated the efficiency of phase gratings, i.e., the visibility upon variation of different parameters. Rotating around an axis parallel to the grid lines of the phase grating changes the grating’s shape and thereby the initial distribution of phase shifts. This yields high visibilities for shorter propagation distances than derived from box shapes. Tilting the grating in the scattering plane allows continuous tuning of the grating’s height that corresponds to an ideal phase shift for a particular photon energy. This opens the way for tuning the design energy suitable for the material under investigation
Optimizing the performance of phase gratings for better visibility in Talbot- Lau interferometry
(2015)
We investigated the efficiency of phase gratings, i.e., the visibility upon variation of different parameters. Rotating around an axis parallel to the grid lines of the phase grating changes the grating’s shape and thereby the initial distribution of phase shifts. This yields high visibilities for shorter propagation distances than derived from box shapes. Tilting the grating in the scattering plane allows continuous tuning of the grating’s height that corresponds to an ideal phase shift for a particular photon energy. This opens the way for tuning the design energy suitable for the material under investigation. Our study included simulations for monochromatic sources with the sampling procedure.
Advanced methods for 3D green density characterization like computed tomography and 3D FE sinter modeling can be utilized for increasing the reliability of sintered components. The experimental in situ observation of sintering, however, is currently restricted to silhouette methods, i.e. heating microscopy. For complex shaped samples, in situ shape screening during shrinkage would allow much better validation of 3D sinter simulation models. Further, by revealing temporary sinter warpage, 3D high-temperature shape screening allows to locate potential defects of complex sintered components. Against this background, BAM developed a testing device for in situ 3D high-temperature shape screening for ceramic and glass-ceramic tapes up to 1000°C [1-3]. Current work is focused on dropping this restriction in sample shape and temperature. The poster illustrates the current state of this work and possible applications of the method e.g. in detecting sinter warpage of metallized glass-ceramic LTCC tapes.
Bioglass® 45S5 is mainly used clinically as powders, granules or pastes instead of sintered compacts. This is due to the inherent problem of crystallization during the sintering, which results in poor mechanical properties and reduced bioactivity. Recently, new bioactive glasses with improved crystallization stability have been developed as promising candidates for manufacturing of sintered powder compacts for bone regeneration, which combine improved sintering behavior with bioactivity. Compared with the well-known Bioglass® 45S5 (SiO2-P2O5-CaO-Na2O) the calcium/alkali oxide ratio was increased, sodium oxide was partially replaced by potassium oxide and up to 3 mol% calcium fluoride were added, in order to stabilize the glass against crystallization. The aim of this study was to investigate the sintering and crystallization behavior of these new bioactive glasses.
Sintering and crystallization were characterized by heating microscopy, XRD, FTIR, SEM, and DTA. The results show that a sintered density of 88-99 % is achieved in contrast to only 57-67% for Bioglass® 45S5. In addition, FTIR and XRD analyses show that Bioglass® 45S5 crystallized during sintering while for the new glasses no crystalline phases are detected. The thermal properties of all glasses were studied by DTA measurements, and the influence of grain size was characterized. These studies showed that full densification can be attained for particle size < 32 µm, whereas coarser particles progressively increase residual porosity. Observed foaming phenomena, are strongly retarded by crystallization of beta-HAp.
Bioglass® 45S5 is mainly used clinically as powders, granules or pastes instead of sintered compacts. This is due to the inherent problem of crystallization during sintering. Recently, new bioactive glasses with improved crys-tallization stability have been developed as promising candidates for manufacturing of sintered powder compacts for bone regeneration, which combine improved sintering behavior with bioactivity. Compared with the well-known Bioglass® 45S5 (SiO2-P2O5-CaO-Na2O) the calcium/alkali oxide ratio was increased, sodium oxide was partially replaced by potassium oxide and up to 3 mol% calcium fluoride were added, in order to stabilize the glass against crystallization. Sintering and crystallization were characterized by heating microscopy, XRD, FTIR, SEM, and DTA. The results show that a sintered density of 88-99 % is achieved in contrast to only 57-67% for Bioglass® 45S5. Whereas Bioglass® 45S5 powder compacts crystallize during sintering, for the new glasses no crystalline phases were detected. Additionally the influence of grain size was characterized. These studies showed that full densification can be attained for particle size < 32 µm, whereas coarser particles pro-gressively increase residual porosity. Observed foaming phenomena, are strongly retarded by crystallization.
Nowadays, the use of bioactive glasses is established for bone regeneration; however glasses are used mostly as powders, granules or in a paste. Sintered scaffolds are not used clinically, because of the in inherent problem of crystallization during the sintering process, resulting in poor mechanical properties and reduced bioactivity. The aim of this study was therefore to design new bioactive glasses, which combine improved processing and sintering with bioactivity.
Compared with the well-known Bioglass® 45S5 (SiO2-P2O5-CaO-Na2O) the calcium/alkalioxide ratio was increased, sodiumoxide was partially replaced by potassiumoxide and up to 8 mol% calciumflorid were added, in order to stabilize the glass against crystallization.
The sintering behavior of the new glasses was characterized by heating microscopy and compared to Bioglass® 45S5. The results showed that the new glasses achieved a sintered density of 88-99 % in contrast to only 57-67% for Bioglass® 45S5. In addition FTIR and XRD analyses showed that Bioglass® 45S5 crystallized during sintering while for the new glasses no crystalline phases were detected. The thermal properties of all glasses were studied by DTA and DSC measures, and the influence of grain size and heating rate were characterized. These studies showed a shift of start and end temperature of sintering process as well as the final density. The structure of sintered specimens during and after sintering was examined using light and electron microscopy (REM).
Bioglass® 45S5 is mainly used clinically as powders, granules or pastes instead of sintered compacts. This is due to the inherent problem of crystallization during the sintering, which results in poor mechanical properties and reduced bioactivity. Recently, new bioactive glasses with improved crystallization stability have been developed as promising candidates for manufacturing of sintered powder compacts for bone regeneration, which combine improved sintering behavior with bioactivity. Compared with the well-known Bioglass® 45S5 (SiO2-P2O5-CaO-Na2O) the calcium/alkali oxide ratio was increased, sodium oxide was partially replaced by potassium oxide and up to 3 mol% calcium fluoride were added, in order to stabilize the glass against crystallization. The aim of this study was to investigate the sintering and crystallization behavior of these new bioactive glasses.
Sintering and crystallization were characterized by heating microscopy, XRD, FTIR, SEM, and DTA. The results show that a sintered density of 88-99 % is achieved in contrast to only 57-67% for Bioglass® 45S5. In addition, FTIR and XRD analyses show that Bioglass® 45S5 crystallized during sintering while for the new glasses no crystalline phases are detected. The thermal properties of all glasses were studied by DTA measurements, and the influence of grain size was characterized. These studies showed that full densification can be attained for particle size < 32 µm, whereas coarser particles progressively increase residual porosity. Observed foaming phenomena, are strongly retarded by crystallization of beta-HAp.
To better understand the mechanism of hydrogen assisted cracking (HAC), it is important to investigate the 3D structure of the cracks non-destructively. Since, cracks introduced by HAC are usually very small, conventional x-ray imaging methods often lack the required spatial resolution.
However, the detection of those cracks can be enhanced by taking advantage of refraction at interfaces within the sample.
To image this refractive deflection we employ analyser based imaging (ABI). In this work we aim at proving the enhanced crack detection of ABI by investigating an alluminum alloy weld.
Ferritic steels with Cr-contents up to 13 wt. % are used as heat exchanger or boiler tube materials in combustion based power plants. These materials are subject to aggressive corrosion caused by the reaction of the steel with highly corrosive gases under high temperatures up to 650°C. The early stages of corrosion and sulfidation especially and the influence of the Cr-content in the alloy are thereby not understood but of fundamental interest.
Our work shows corrosion mechanisms and presents corrosion models for Fe and different Fe-Cr-alloys under pure SO2 und SO2+O2 atmospheres for different time scales. Modell alloys of high purity are used to focus on the reaction of the intended elements: Fe, Cr, S, and O. Long-time experiments (≥12h) took place in tube furnaces and short-time experiments (≥5min) in a special designed light furnace. Heating and cooling took place under inert atmosphere. The reactive gases were added not until the experimental temperature was reached. Samples were analyzed using high resolution synchrotron X-ray diffraction using a micro focus setup and electron microscopy including FIB.
Many earlier studies on corrosion and sulfidation on iron based alloys show a higher corrosion rate and material loss when sulfur was present in the atmosphere. In contrast, later studies propose an inhibiting effect of sulfur containing atmospheres. On the one side, most likely due to the formation of a protective layer of Mx(SO4)y -phases at the scale-gas interface. On the other side, a very recent study proposes the theory that MxSy-phases limit the further diffusion of elements. Up to now, no Mx(SO4)y –phases were detected in our samples, but sulfide phases nucleated within the oxide phases. For pure Fe our samples show FeS at the scale-metal interface working as a diffusion barrier for Fe-Cations from the base material in to the oxide scale. The above lying spalled off oxide-sulfide scale shows a wide area of small voids and accumulations of FeS-Crystals at the bottom. Under the main oxide scale a second generation of oxide-sulfide scale starts to form. For the Fe-Cr-alloys the inner oxide scale only shows FeS- and CrS-phases surrounded by hollow space. The here presented study will explain and discuss a new growth model for the shown phenomenon.
Modulare Hüftprothesen können individuell der Anatomie des Patienten angepasst werden und haben dadurch eine positive Auswirkung auf dessen Lebensqualität. Unter Betriebsbelastung sind in der zusätzlichen Konusverbindung zwischen Schaft und Kopfteil Relativbewegungen möglich. Selbst an Titan-Bauteilen bewirken diese durch Verletzung der Passivschicht Reibkorrosion und infolgedessen Spaltkorrosion. Verunreinigungen wie z.B. Knochenrückstände in der Konusverbindung bewirken eine erhöhte Relativbewegung und führen zusätzlich zu einer örtlichen Spannungsüberhöhung durch lokale Pressung. Die an der Mantelfläche des Schafts entstehenden Korrosionsdefekte reduzieren die Schwingfestigkeit des Schafts erheblich, so dass dort Schwingrisse initiiert werden können, welche dann durch die üblichen zyklischen Schwell-Biegebelastungen bis zum Restgewaltbruch wachsen.
The role of metal reducing bacteria (MRB) in corrosion is being controversially discussed in the literature. They can utilize metals including iron, uranium and manganese as well as many organic compounds as electron acceptors. The reduction of Fe(III) compounds to soluble Fe(II) species leads to the destruction of passive films on steel, resulting in acceleration of general and local corrosion processes. Recent research shows that the secretion of electron shuttles like riboflavins also contribute to the extracellular electron transfer (EET).
The aim of this project is to understand the chemical and electrochemical interaction mechanisms of MRB with steel surfaces by means of combined in situ techniques. An electrochemical XANES (x-ray absorption near edge spectroscopy) cell has been designed to study the changes of passive film chemistry in the presence of biomolecules and MRB. Electrochemical quartz crystal microbalance (eQCM) is used for studying the kinetics of bacterial cell attachment and diffusion of biomolecules in model biofilms. In situ investigations are complemented by ex situ spectroscopic and microscopic analysis to investigate the biofilm structure, composition and cell viability.
Via the combination of electrochemical methods with spectroscopic techniques and QCM we are able to follow biological processes and resulting degradation of steel surfaces in a non-destructive manner. The selection of model systems and a defined biological medium allows the identification of the effects of individual surface and environmental parameters. The fundamental understanding of bacterial attachment mechanisms and initial steps of biofilm formation will contribute to the development of new antifouling strategies.
Oft sind von außen nicht sichtbare „Ungänzen“ im Innern die Ursache für das Versagen von Bauteilen. In manchen Fällen genügt eine herkömmliche metallographische Präparation, um der Schadensursache auf die Spur zu kommen. In anderen Fällen aber sind die Ungänzen zu klein oder ihre Lage zu ungewiss, um sie mit zufälligen Schnitten zu treffen. Zudem würde man durch Fehlversuche das Bauteil zu stark schädigen und so wertvolle Spuren verlieren sowie die weitere Untersuchbarkeit einschränken. In solchen Fällen ist es im wahrsten Sinn des Wortes zielführend, die Ungänzen mit Hilfe eines räumlich abbildenden ZfP-Verfahrens zu lokalisieren und dann mit den erhaltenen Koordinaten eine metallographische Zielpräparation präzise durchzuführen. Als Methoden kommen z.B. Mikro-Computer-Tomographie (µCT) und Tauch-Ultraschall in Frage. Bauteile können kleine elektronische Komponenten sein, aber auch große Bauteile wie Wellen aus Fahrzeugen oder Anlagen.
In the course of miniaturizing modern technology down to the molecular scale, much remain unknown about the materials behavior and the deviations from the bulk that might arises from confinement effects. Here, a combination of nano-sized relaxation spectroscopies (Broadband dielectric spectroscopy (BDS) and Specific heat spectroscopy (SHS); employing AC nanochip calorimetry) were utilized to investigate the glassy dynamics of ultra-thin films of Poly (vinyl methyl ether) (PVME) and of blends PVME / Polystyrene (PS) 50:50 wt-%,, which are miscible in bulk (thicknesses: ca. 8 nm – 160 nm, film thickness was controlled by ellipsometry, film topography by AFM). Both methods are sensitive to different probes; where SHS senses entropy fluctuations while BDS measures dipole fluctuations. For BDS measurements, a recently developed nano-structured electrode sample arrangement is employed, where ultra-thin films are spin-coated on an ultra-flat highly conductive silicon wafer, sandwiched between a wafer with nanostructured SiO2 nano-spacers with heights between 35 nm and 70 nm. For PVME films, two thickness independent processes were observed and interpreted to be the α-processes of a bulk-like layer and a process due to an absorbed layer to the substrate. This adsorbed layer further undergoes a confinement effect that results in the localization of the segmental dynamics, which results in an Arrhenius-like temperature dependence. A detailed analysis of the dielectric strengths of both processes reveals that the thickness of the adsorbed layer decreases with increasing temperature, while that of the bulk-like layer increases. For the blend system, by measuring the dynamic Tg in dependence of the film thickness, SHS showed that the Tg of the whole film was strongly influenced by a nanometer-thick surface layer at the polymer/air interface due to a self-assembling process. The dynamic Tg obtained from the SHS measurements decreased with decreasing film thickness. On the other hand, BDS measurements showed a completely different behavior. At high temperatures, the temperature dependence of the relaxation times of the films follows that of bulk-like PS/PVME; obeying the VFT-law. With decreasing temperature, the temperature dependence deviates from the VFT to an Arrhenius law; where the apparent activation energy decreases with decreasing film thickness. This is the first example where confinement induced changes were observed by BDS for ultra-thin films. All results were analyzed in detail in a comprehensive discussion.
The optical properties of semiconductor nanocrystals (SCNCs) depend on constituent material, particle size, and surface chemistry, with the size of the photoluminescence (PL) quantum yield (QY) and the PL decay kinetics being largely controlled by the number of dangling bonds, which have to be properly passivated for high quality materials. Hence, PL measurements can provide insight not only in SCNC photophysics, yet can be also used for quality control of SCNC synthesis and surface modification. In this respect, steady state and time-resolved fluorometry and confocal microscopy with time correlated single photon counting were used to study the PL properties of core-shell CdSe SCNCs with different shells and surface chemistries on ensemble and single particle level, thereby focusing on a correlation of ensemble PL QY and PL decay kinetics with particle brightness, PL time traces, and the On-time fraction of single SCNCs. Additionally, confocal PL images were correlated with AFM measurements in order to derive the amount of absorbing, yet non-emissive ”dark” SCNCs, the presence of which resulting in an underestimation of ensemble PL quantum yields. The results of this study can help to identify synthetic routes and surface modifications, which minimize the fraction of dark SCNCs.
The optical properties of semiconductor nanocrystals (SCNC) are controlled by constituent material, particle size, and surface chemistry, specifically the number of dangling bonds favoring nonradiative deactivation, and hence also by particle synthesis. In this respect, the fluorescence properties of coreshell CdSe SCNCs with different shells and surface chemistries were studied on ensemble and single particle level, using steady state and timeresolved fluorometry and confocal microscopy with time correlated single photon counting detection. Special emphasis was dedicated to correlate ensemble photoluminescence (PL) quantum yields and decay kinetics with particle brightness, PL time traces, and the Ontime fraction of the single SCNCs. Additionally, the confocal PL images were correlated with AFM measurements in order to derive the amount of absorbing, yet nonemisssive ”dark” SCNCs, the presence of which leading to an underestimation of ensemble PL quantum yields. The results of this study can help to identify synthetic routes and surface modifications minimizing the fraction of dark SCNC, thereby closing the gap to the ultimate goal of colloidally and photochemically stable SCNCs with a PL quantum yield of close to unity.
Maintaining a consistent product quality is critical for the thin film industry. Therefore, the development of highly accurate protocols able to detect variations and nonidealities in manufactured thin film devices is essential and helps improve production quality and decrease manufacturing costs. The present work will discuss the accuracy and reproducibility in the determination of the thickness of thin films relevant for optoelectronic industry using spectroscopic ellipsometry, starting with the importance of set-up calibration, the need for very well defined calibration standards suitable for real devices and not least, the importance of accurate data analysis. As ellipsometry is an indirect method and theoretical modelling is needed to obtain the desired information regarding the investigated samples (e.g. thickness, roughness, optical constants), the model uncertainty has to be discussed and taken into account. If for ideal samples consisting of single layers with well-known optical constants the determination of thickness and roughness is straight forward and pretty accurate, for real samples, more complex theoretical models are needed and extracting accurate information regarding the samples can be very challenging. With careful calibration and a multidisciplinary approach, a combined measurement methodology can be developed enabling reliability, comparability, and accuracy. For production-relevant operation, maintaining the ease of use and scalability of ellipsometry as a technique can also be retained.
In the present study, internal damage to an AlSi12CuMgNi alloy reinforced with planar random Al2O3 short fibres was investigated after compression testing. Due to the alloy composition, this composite contains a second reinforcement phase in the form of eutectic Si, which builds interpenetrated networks in the volume and increases the creep resistance and load-bearing capacity of the material. Materials with their fibre plane parallel and transversal to the load direction were characterized in order to investigate the dependence of load partition and damage on fibre plane orientation. In-situ compression testing during neutron diffraction measurements showed that internal damage is strongly influenced by the load partition between matrix and reinforcement. Moreover, micro-computed tomography was performed in the same material after ex-situ compression for damage analysis. In the case of a fibre plane perpendicular to the applied load, breakage and interconnected cracks appeared in a significantly higher volume fraction than with a fibre plane parallel to load.
Two polyethylene types with ultra high (UHMWPE) and high molecular weight (HMWPE), which are used as neutron radiation shielding materials in storage casks for radioactive waste, were subjected to gamma irradiation doses up to 600 kGy and subsequent thermal ageing at 125 °C for up to one year. One material was a medical grade UHMWPE and the other a HMWPE containing an antioxidant. Degradation effects in the materials were characterized using colorimetry, UV-Vis spectroscopy, MIR and FTIR measurements, DSC and, in the case of HMWPE, insoluble content determination. Both materials exhibited a yellowing upon irradiation. The discoloration of UHMWPE disappeared again after thermal ageing, which is why it was attributed to annealable color centers in the form of free radicals entrapped in the crystalline regions of the polymer that recombine during thermal ageing. Furthermore, oxidation species were observed with MIR and FTIR spectroscopy. For HMWPE, the yellowing occurred during both irradiation and thermal ageing and was correlated to antioxidant decomposition. Additionally, black spots were observed after thermal ageing of HMWPE that were attributed to reaction products of antioxidant derivatives and catalyst residues. While only little evidence of oxidation species was found in the light material parts, oxidation is expected to concentrate in the black spots as the catalyst residue promotes hydroperoxide decomposition and thus radical formation that initiate polymer oxidation
A test campaign was launched to determine the mechanical properties of the HL-LHC 11 T Nb₃Sn magnet components in order to accurately model the mechanical properties in Finite Element simulations that predict the stress and strain distribution in these magnets. Static and dynamic test methods have been applied for determining elastic materials behavior, and highly accurate Young’s moduli are obtained with the dynamic methods resonance and impulse excitation. These non-destructive methods also enable temperature dependent modulus measurements during in situ heat cycles.
Polymers are favorable materials for gas separation membranes. In general, gas transport experiments are performed with films in the range of 100 µm thickness. However, in large-scale processes very thin selective polymer layers in the range of 100 nm to 1 µm are used. Moreover, it was shown that thin films behave different compared to thick films with respect to gas transport properties and physical aging as well. Thus, for fundamental research it is important to realize gas transport experiments with thin films. The Quartz Crystal Microbalance (QCM) is a very sensitive method to detect mass changes in the range of nanograms. Therefore, this method enables sorption experiments with thin films or layers attached to the QCM crystal (100 nm up to 1 µm). Here, we present the experimental set-up for using the QCM technique for characterizing the gas sorption behavior of thin polymer films in a temperature controlled pressurized environment (up to 50 bar) - also quartz crystals and crystal holders were optimized. The study aims for the characterization of long-term behavior and physical aging of high-performance polymers for gas separation membranes - such as polyimides and polymers of intrinsic microporosity (PIMs) and respective nanocomposites. Especially the differences of the behavior of thin films compared to films with thicknesses up to 100 µm as well as nanofiller induced-effects are adressed.
Low-alloyed CrMoV steels, such as T24, are widely used for welded components in fossil power stations due to their excellent creep-strength. Spectacular failure cases in the recent years exhibited severe cracking in T24 welds. The results showed that hydrogen-assisted cracking (HAC) occurring up to 200 degree Celsius cannot be excluded. Hence, a basic understanding is necessary on how hydrogen affects the material properties of welded microstructures. In this regard, each weld microstructure (HAZ and weld metal) has influence on the HAC susceptibility and respective hydrogen diffusion. Thus, the present contribution summarizes different results obtained from experiments with grades T24 (CrMoV alloy) and T22 (CrMo) and thermally simulated HAZ. Tensile tests were conducted with hydrogen charged specimens and compared to hydrogen-assisted stress corrosion cracking results obtained from slow strain rate tests (SSRT) up to 200 degree Celsius. Electrochemical permeation and degassing experiments were performed to identify a particular weld microstructure influence on hydrogen diffusion and trapping (especially in the HAZ). The results showed that T24 base material has improved resistance to hydrogen-assisted degradation/cracking. In contrast, the as-welded HAZ had remarkably increased susceptibility (tesnile tests at hydrogen concentration of 1 to 2 ppm). SSRT experiments confirmed this at elevated temperatures for both the T24 and the T22. Hence, the evaluation of a particular degradation of the mechanical properties should be performed independently for each weld microstructure. In addition, the HAZ showed decreased diffusion coefficients (at room temperature) of approximately one magnitude compared to the base materials. Trapped hydrogen was determined in the T24 at temperatures up to 120 degree Celsius compared to 75 degree Celsius in the T22. This has to be considered in case of changing operational temperatures, e.g. in the case of start-up and shutdown processes of boiler components.
Derzeit wird der Einsatz metallener Werkstoffe in CCU-/CCS-Anlagen hinsichtlich deren Korrosionsbeständigkeit und eine eventuell daraus resultierende Herausforderung diskutiert. Während des CO₂-Transportes vom Abscheide- zum Injektionsort kann es aufgrund der den CO₂-Strom begleitenden Beimengungen, wie Wasser, O₂, SOₓ , NOₓ , Temperaturschwankungen durchaus zu Kondensationseffekten und daraus resultierenden Schäden kommen.
Es konnte gezeigt werden, dass die sich möglicherweise innerhalb einer CO₂-Rohrleitung bildenden Kondensate infolge von Begleitstoffen wie SO2 und NO2 eine viel korrosivere Wirkung auf Rohrleitungswerkstoffe entfalten, als in reinem CO₂.
In letzter Zeit kommen immer mehr alternative Energiequellen als Ersatz fossiler Brennstoffe zum Einsatz, so auch die Solarthermie. Jedoch sind die Betriebsbedingungen aufgrund der chemischen Zusammensetzung der Wärmeträgermedien und herrschenden Temperaturen extrem hinsichtlich Korrosion. Da die Kraftwerke bei maximaler Lebensdauer ökonomisch vertretbar sein müssen, ist eine Werkstoffauswahl basierend auf Voruntersuchungen notwendig, um einen sicheren und verlässlichen Betrieb dieser Anlagen zu gewährleisten.
Die Werkstoffauswahl hängt von der Betriebstemperatur eines Kraftwerks bzw. der chemischen Zusammensetzung des Wärmeträgermediums ab. In hochkorrosiven Umgebungen werden aufgrund ihrer sehr guten Korrosionsbeständigkeit Nickelbasislegierungen nicht nur für stark korrosiv beanspruchte Bauteile als die Lösung angesehen. Jedoch kann es durchaus beständigkeitsbedingte Einschränkungen für den Einsatz geben, wofür die hier vorgestellten Ergebnisse dienen sollen.
In diesem Beitrag wird die Beständigkeit ausgewählter hochlegierter Werkstoffe (inklusive einer neuentwickelten Legierung in einer Nitrat-Salzschmelze (60 % NaNO3/40 % KNO3) vorgestellt, die mittels elektrochemischer Messungen und Auslagerungsversuchen ermittelt wurde.
Since geothermal wells are a feasible energy source to replace fossil fuel supply, many technologies have been developed to take advantage of geothermal energy. Nevertheless, service conditions in geothermal facilities are due to the chemical composition of hydrothermal fluids and temperatures, in many cases, extreme in terms of corrosion.
Therefore, materials selection based on preliminary material qualification is essential to guarantee a secure and reliable operation of the facilities. The corrosion behavior of different high-alloyed metals including Duplex and austenitic stainless steels as well as a nickel alloy have been evaluated in artificial geothermal fluids simulating the conditions in some locations with geothermal potential in Germany as well as two sites in Indonesia. The suitability of carbon steel 25CrMo4, stainless steels X2CrNiMo17-12-2, X2CrNiMo-22-5, X2CrNiMoCuWN25-7-4 and super austenitic steel X1CrNiMoCu32-28-7 in these geothermal fluids obtained by electrochemical measurements and exposure tests is limited. The nickel alloy NiCr23Mo16Al shows an excellent corrosion resistance against pitting corrosion. Excluding its high cost, it is a very good alternative to be used in the construction of geothermal facilities having highly saline brines. Stainless and Duplex steels exhibit a limited corrosion resistance concerning pitting and crevice corrosion. Beside of the higher alloyed materials, also the lowalloyed steel 25CrMo4 could be employed as a constructional material for the geothermal power plant in stagnant highly acidic non Saline environments, as long as the wall thickness of the material vs. corrosion rate is taken into account.
The formation of biofilms on different materials provokes high costs in industrial processes, as well as in medical applications. Therefore, the interest in development of new materials with improved surfaces to reduce bacterial colonization rises. In order to evaluate the quality and safety of these new materials, it is highly important to ensure world-wide comparable tests that are relying on statistical evidence. The only way to reach this statistical safety is through a high-throughput Screening under standardized test conditions.
We developed a flow through system for cultivation of biofilm-forming bacteria under controlled conditions with a total capacity for testing up to 32 samples in parallel. Quantification of the surface colonization was done by staining the bacterial cells with a fluorescence marker, followed by epifluorescence microscopy. More than 100 images of each sample were automatically taken and the surface coverage was estimated with the free open source software gmic (http://gmic.eu), followed by a precise statistical evaluation. Overview images of all gathered pictures of the whole material coupon were generated to illuminate the colonization characteristics of the selected bacteria on certain materials.
With this method, differences in bacterial colonization on different materials can be quantified in a statistically validated manner. The innovative and solid test procedure will support the design of improved materials for medical and industrial applications such as implants, ship hulls, pipelines, heat exchangers, aquaculture equipments, photovoltaic-panels and fundaments of wind power plants.
The Full-Notch Creep Test (FNCT) is widely used to characterize the slow crack growth (SCG) behavior of polyolefin materials in “inert” media as well as effects of environmental stress cracking (ESC) in which the medium has decisive influence on damage mechanism and time to failure tf*. Usually the FNCT is applied as a standardized testing method (ISO 16770) using a few universal liquid media, such as solutions of Arkopal N 100 (detergent).
Selected relevant PE-HD materials are investigated also in real media and influences of temperature and geometry of specimen and notch are explicitly addressed. The investigations comprise also the ESC behavior of PE-HD in media that are sorbed to a significant extent – such as Diesel and Biodiesel – based on comparison with samples previously saturated with those media.
Due to their chemical structure, a rigid disk-like aromatic core and flexible alkyl chains attached to the core, discotic liquid crystals (DLCs) can organize and stack themselves into columns in a hexagonal columnar mesophase, a mesophase in between the plastic crystalline and isotropicphase. The overlap of the π orbitals of the aromatic core in the hexagonal columnar mesophase leads to a high charge-carrier mobilitie along the column axis – these columns can be considered as “moleculer nanowires” making liquid crystals a promising class of materials for electronic applications. Previous studies on DLCs showed that the phase behavior of DLCs is susceptible to nano confinement. Here in this study, the thermotropic collective orientational order of 2,3,6,7,10,11 hexakis[hexyloxy] triphenylene (HAT6), a triphenylene based DLC, and the effects of nano confinment on of its phase behavior were investigated by broadband dielectric spectroscopy (BDS) and differential scanning calorimetry (DSC). HAT6 was embedded into nanoporous anodic aluminum oxide membranes by melt infiltration in the isotropic phase under argon atmosphere. The filled membranes have the thickness of 80 µm and the diameter of 15mm and parallel aligned tubular nanopores having the pore diameters of 25, 40, 80 and 180 nm. The filling degree for each sample was checked by thermogravimetric analysis (TGA) in order to ensure complete filling. The bulk HAT6 forms, a hexagonal columnar phase between the isotropic phase above 371 K, and the plastic crystalline phase below 340 K. Unlike the bulk, the confined HAT6 forms two peaks in the heat flow during the plastic crystalline-to-hexagonal columnar phase transition, which might be the evidence of two different phase structures close to the wall and in the pore center. Moreover, the isotropic-to-columnar transition of the confined HAT6 shifts with decreasing pore diameter to lower temperatures.
Advanced methods for 3D green density characterization like computed tomography and 3D FE sinter modeling can be utilized for increasing the reliability of sintered components. The experimental in situ observation of sintering, however, is currently restricted to silhouette methods, i.e. heating microscopy. For complex shaped samples, in situ shape screening during shrinkage would allow much better validation of 3D sinter simulation models. Further, by revealing temporary sinter warpage, 3D high-temperature shape screening would allow to locate potential defects of complex sintered components. Against this background, BAM developed a testing device for in situ 3D high-temperature shape screening for ceramic and glass-ceramic tapes up to 1000°C. Current work is focused on dropping this restriction in sample shape and temperature. The poster illustrates the current state of this work and possible applications of the method e.g. in detecting sinter warpage of metallized glass-ceramic LTCC tapes.
In times of the energy revolution, the need for energy efficient separation processes promotes the advancement of new high performance materials for use as highly selective separation membranes. Most promising materials in this field, especially for gas separation, are polymers with intrinsic microporosity (PIMs) which were firstly introduced by Budd and McKeown. In this study the permeability of PIM-1 was increased by 439 % by formation of nanocomposites with only 1 wt% of polyhedral oligomeric phenethyl-silsesquioxane (PhE-POSS) within the polymer matrix. As the CO2/CH4 selectivity is fully retained, this leads to a shift in the Robeson plot towards the upper bound. The Robeson plot describes the current state of the art trade-off relation between selectivity and permeability of all known membrane polymers. As molecular mobility is a key factor for gas transport as well as the often observed physical aging of such polymers, our study also includes for the first time, molecular dynamics and conductivity of pure PIM-1 and PIM-1 nanocomposites as investigated by broadband dielectric spectroscopy (BDS).
Mechanical characterization of high-density polyethylene in contact with diesel and biodiesel fuels
(2016)
Renewable resources become more and more relevant to maintain energy demands for an increasing global population. Biosynthetic fuels like biodiesel might replace conventional petrochemical fuels, such as diesel. However, more research is needed to characterize the interaction between the different fuels and polymeric materials widely used in the fuel infrastructure as well as for automotive parts. Especially changes in the structural properties and mechanical behavior of the polyethylene (PE-HD) have to be addressed.
The presented work comprises the direct interaction of high density polyethylene (PE-HD) with diesel and biodiesel, resulting in swelling and plasticization. Also long-term degradation phenomena will be discussed.
The chosen PE-HD types are typical thermoplastic resins for container and storage tank applications. The impact of diesel and biodiesel in PE-HD is investigated by changes in the mechanical properties with emphasis on the Charpy impact strength. Furthermore, structural and dynamic influences on the polymeric material induced by diesel and biodiesel are proven in Dynamic Mechanical Analysis (DMA). Both methods, Charpy impact strength and DMA, reveal softening effects due to the migration of diesel and biodiesel into the amorphous regions of PE-HD.
Since biodiesel is more prone to oxidative degradation compared to diesel, the fuel/air/polymer-interaction is studied for partly immersed tensile test specimens. Main focus of the evaluation is the co-oxidation. Here, the accelerated deterioration of PE caused by the sorption of the facile oxidation of biodiesel into the solid polymer might be a major degradation mechanism in this context.
Characterization of statistical EO-PO copolymers containing different end groups by UPLC/ESI-MS
(2016)
Commercial statistical ethylene oxide (EO) and propylene oxide (PO) copolymers of different monomer compositions and different average molar masses were studied by liquid chromatography under critical conditions (LCCC). Theoretical predictions of the existence of a critical adsorption point (CPA) for statistical copolymers with a given chemical and sequence distribution, could be studied and confirmed. An improved way to determine these critical conditions in a copolymer, alongside the inevitable chemical composition distribution (CCD), with the aid of mass spectrometric detection is described. Shift of the critical eluent composition with the monomer composition of the polymers could be observed. Due to the relatively low average molecular weight, broad molecular weight distribution (MWD) and the presumed existence of different end group functionalities as well as sequence distribution, gradient separation only by CCD was not possible. Therefore isocratic separations at the CPA of definite CCD’s were applied. Although the various present distributions partly superimposed the separation process the goal of separation by end group functionality could still be achieved on the basis of the additional dimension of ESI-MS. The existence of HO-H besides the desired AllylO-H end group functionalities could be confirmed and their amount could be estimated.
Materials that respond to the environment by changing their properties are critical for developing
autonomously adaptive systems. However, to reversibly influence a material's inherent characteristics, such as its ability to self-heal, from distance without continuously expending energy, remains a challenging task. Herein, we report on the modul at ion of imine exchange kinetics by light, manifested in a remote controllable dynamic covalent polymer network. Simple mixing of a commercially available amino-functionalized polysiloxane with small amounts of a photoswitchable diarylethene cross-linker, carrying two aldehyde groups, yields a rubbery material. Its viscoelastic and self-healing properties can be reversibly tuned with everyday light sources, such as sunlight. Our two-component system offers the unique advantage that self-healing takes place continuously without any additives at ambient conditions and is neither dependent on continuous illumination nor does it require recent damage. Overall, our approach allows for the local amplification of intrinsic material properties in a permanent yet reversible fashion. The availability of the inexpensive sta1ting materials on a multi-gram scale, the easy synthesis of the polymer network, and its convenient handling paired with high versatility make our Approach highly applicable to create custom-tailored adaptive materials.
Healable materials are able to repair inflicted damages, herin often applied: dynamic covalent polymer networks. We have shown in this study that light of different colors shift the Diels-Alder and retro Diels-Alder crosslinking and decrosslinking equilibrium. This effect was utilized for self-healing of a polymer film. Small-angle X-ray scattering was used to quantifiy the polymeric mesh size on a nanoscale.
Calcium cobaltite is a promising p-type oxide thermoelectric material for high temperature applications due to its high figure of merit between 600 °C and 900 °C in air. The solid-state-reaction is well known for large scale powder synthesis of functional materials. As a high temperature process, the powder synthesis consumes a lot of energy. In different studies, different synthesis conditions were used for the preparation of calcium cobaltite powder. This study showed that a higher energy input (elevated temperatures, longer dwell times, or repeated calcinations) during powder synthesis does not increase but decrease the Seebeck coefficient and the electrical conductivity. The same correlation was determined for the densification. As a higher energy input leads to a larger grain size and therefore to a reduced sinter activity, it can be concluded that the thermoelectric properties are correlated with the sinter activity of the powder. These results can be used to minimize the energy demand for the powder synthesis of Ca₃Co₄ O₉.
Multilayer carbon nanomembrances (CNMs) could pave the way for a new ultrathin functional conductive coatings with tunable electrical, optical, and chemical properties. Due to their molecular thickness, they can also be regarded as “interfaces without bulk” separating regions of different gaseous, liquid, or solid components and controlling the materials exchange between them, making them optimal materials for membranes applications. Furthermore, their physical and chemical properties depend strongly on their structure, molecular composition, and the surroundings of either sides, thus allowing for tailored properties. Here, nanolayers of Aromatic p-terphenylthiol (TPT) self-assembled into 2D carbon monolayers (thickness - 1.6 nm) were synthesized and further crosslinked by ion bombardment, forming CNMs. Here, though a recently developed multilayer nanosheets routine, stacks of 5, 10, 15 and 20 TPT sheets where transferred on top of each other forming a multilayered CNMs. However, this transfer routine could introduce some intrinsic defects to the sheets, which would alter the molecular composition and / or structure, thus consequently the CNMs properties. Therefore, it is essential to characterize defects in “pure” TPT nanomembranes, before tailoring the molecular compositions, e.g. adding functional groups. For this reason, broadband dielectric spectroscopy (BDS) was utilized to characterize any defects that could be rasied during preparation. Due the structure of pure TPT membranes, no dipole moment should exsist. However, the presence of other elements, e.g. water or sulphur, would result in a dipole moment that could be probed by BDS.
As a main result, for all different stacked-layer numbers, a clear relaxation process is seen, which moves to higher frequencies with increasing the temperature. The temperature dependence of the relaxation rate of this process is independent of film thickness and can be well described by a common VFT function, hence a corporative motion. This relaxation process was assigned to intrinisic defects in the membranes, introduced during preparation, which was further confimed by a detailed anaylsis of the dielectric strength. This is the first BDS measurment on TPT CNMs.
Many engineering structures are made of composite materials or metal foam. To simulate the deformational behaviour of these structures often requires a high number of discretisation elements. This in turn yields a very large system of linear
equations that are extremely time and memory consuming or practically impossible to solve. It is therefore desirable to find an approach to overcome this obstacle.
Many engineering structures are made of composite materials or metal foam. To simulate the deformational behaviour of these structures often requires a high number of discretisation elements. This in turn yields a very large system of linear equations that are extremely time and memory consuming or practically impossible to solve. It is therefore desirable to find an approach to overcome this obstacle.
In the presentation different zinc coatings are presented and investigated. Their naturally formed protective layers are electrochemically characterized and corrosion relevant values are determined by using a gel pad based on polysaccharide. The corrosion relevant values allow the differentiation of various zinc coating systems and can describe the current protective effect provided by the coating. It is shown that gel-type electrolytes influence protective layers and coatings considerably less than corresponding bulk electrolytes. From the results it is evident that gel-type electrolytes represent a viable and promising field in corrosion research.zeige mehr
Deuterium permeation and cracking in duplex steels as viewed by ToF-SIMS and HR-SEM with data fusion
(2016)
Better understanding of hydrogen assisted degradation and trapping mecha-nisms requires sufficient imaging techniques for respective hydrogen-microstructure interaction studies, in particular with multi-phase metallic micro-structures [1]. The present work is focusing on the elucidation of deuterium be-havior in two austenitic-ferritic duplex stainless steels (DSS) under the assumption that deuterium behaves in many ways similarly to hydrogen [2]. For case studies standard 2205 and lean 2101 DSSs were chosen due to the extensive use of these steels in industry [3]. The analyses were conducted by using a novel in-situ permeation and Time-of-Flight secondary ion mass spectrometry (ToF-SIMS) imaging technique or by ex-situ ToF-SIMS imaging following electrochemical charging experiments. Another pioneering procedure was data fusion (including chemometry) of results of powerful laterally resolved chemical analysis and high resolution structural characterization techniques .
Results for the ex-situ observations showed a different influence of deuterium loading on the two steel grades as well as different damage mechanisms in each phase. Formation of sub-surface blisters between the ferrite and austenite were obtained in both the standard and the lean DSS. In both steels, an increased deuterium concentration was observed around deformed regions such as cracks, confirming that they originate from the presence of deuterium [4]. The formation of parallel cracks was obtained only in the austenite within the standard duplex whereas in the lean duplex the highest intensity of deuterium was obtained in the austenite along the ferrite-austenite interphase.
In comparison, application of the novel in-situ permeation technique enabled to register and record the deuterium permeation through the material and the respective saturation sequence of the two phases as well as the interfaces. Faster diffusion of the deuterium was observed in the ferrite and a direct proof for deuterium enrichment at the austenite-ferrite interface has been given [1]. The integration of the specified techniques gives a better insight into the processes leading to hydrogen induced failure. These two experimental techniques provide very valuable tools for elucidation of respective metallurgical failure mechanisms that can be used for the validation of respective numerical models for hydrogen assisted cracking (HAC).
The chemical industry has expressed great interest in using polyethylene terephthalate (PET) as material for packagings for the transport of dangerous goods. Due to the high strength and stiffness of PET, the wall thickness and weight of packagings can be reduced. This is a relevant cost factor. PET is a semi-crystalline thermoplast which is produced by polycondensation of terephthalic acid and ethylene glycol.
According to the European dangerous goods regulations RID and ADR, samples of PET design types of packagings for dangerous goods must be pre-stored with the original filling good for six months at 23°C, before the design type tests can be carried out. For packagings made of polyethylene (PE) tests to prove the stress cracking resistance by using laboratory methods are possible to reduce time and costs. Therefore, standard liquids, simulating the different types of damaging effects on PE are defined in RID and ADR. However, there is no information and research available about the damaging mechanisms on PET in comparison to PE, especially regarding to stress cracking resistance and test methods.
The aim of this work is to compare the stress cracking resistance of PE and PET with the Full Notch Creep Test (FNCT), which was developed by chemical industry and is described in the standards EN ISO 16101 and EN 15507. It was investigated whether testing specimens made of PE and PET with a full coplanar notch around the middle of the specimens show weakening after the impact of a tensile force in a wetting solution (Lutensol® FSA 10) at 50°C in a test device on the basis of the FNCT.
The test results confirmed the suitability of the method for eight PE grades. Unfortunately, this method couldn’t be used for PET because the specimens broke during notching. In addition the molding of the sheets and the following temper process for twelve hours are very time-consuming, and the specimens broke during notching due to the high brittleness of PET.
Another possibility to provide evidence of stress cracking resistance of PE packagings is laid down in BAM’s Dangerous Goods Rule BAM-GGR 015. This test was carried out with PE and PET bottles to compare both materials. Therefore 1l test bottles were filled with a 5% wetting solution and mounted with a clamping tool for 28 days at 40°C. Tensile test specimens were cut out afterwards from the middle of the bottles in the deformed areas. Tensile strength and breaking elongation of PE specimens were determined in comparison to the PET specimens. The tensile properties of the PET specimens couldn’t be determined due to the strength and the stiffness of the material.
In conclusion the only way to provide information about the stress cracking resistance of PET was to perform stacking tests. 1l bottles made of PE and PET were filled with a 5% wetting solution and stored with a stacking load for 28 days at 40°C according to EN ISO 16495. Design types of PE and PET both passed the stacking tests.
Hydrogen-assisted cracking (HAC) represents a significant failure risk for (high strength) creep resistant low-alloyed steel components in fossil-fired power plant applications at temperatures of up to and above 200 °C. This particularly applies to respective start-up and shut-down processes associated with alternating service-conditions in terms of load flexible power plants. For quantitative determination of localized crack critical hydrogen concentrations, the temperature dependent hydrogen diffusion coefficients have to be determined as exactly as possible.
However, available literature provides a wide range of hydrogen diffusion coefficients for low alloyed steels with similar microstructures. Additionally, the available diffusion data seem not to be very reliable and their scatter increases with decreasing temperature. One reason is that the experimental boundary conditions can have a major impact on the determination of respective effective diffusion coefficients. Hence, the scope of this study is to evaluate the influence of the experimental boundary conditions on the derived diffusion coefficients. In addition, different methods for calculating diffusion coefficients are discussed. To elucidate such influences and to draw a line to practical application, the diffusion and trapping behavior in the creep resistant steel 7CrMoVTiB10 10 has been studied.
For such purpose, hydrogen charged specimens were isothermally degassed at different temperatures using carrier gas hot extraction (CGHE). Based on experimental data, a numerical model has been developed by which the hydrogen transport behavior and the respective hydrogen distribution during CGHE can be assessed.
It is demonstrated that the specimen heating rate has a large influence on the calculated diffusion coefficients under assumption of isothermal degassing which elsewhere has been underestimated in the assessment of diffusion data in creep-resistant steels. The numerical results suggest that calculation methods for diffusion coefficients are limited if compared to experimental results. It also turned out that the sample preparation time before CGHE can enormously influence determined diffusion coefficients. Consequently, non-homogeneous hydrogen concentration profiles have to be anticipated in the simulations to arrive at characteristic effusion curves consistent to respective CGHE experiments. In turn, validated diffusion coefficients are now available for the low-alloyed Cr-Mo-V steel, which can be helpful to calculate appropriate hydrogen removal heat treatment procedures.
A test campaign was launched to determine the mechanical properties of the HL-LHC 11 T Nb3Sn magnet components in order to accurately model the mechanical properties in Finite Element simulations that predict the stress and strain distribution in These magnets. Static and dynamic test methods have been applied for determining elastic materials behavior, and highly accurate Young’s moduli are obtained with the dynamic methods resonance and impulse excitation. These non-destructive methods also enable temperature dependent modulus measurements during in situ heat cycles.
Hydrogen-assisted cracking (HAC) represents a significant failure risk for (high strength) creep resistant low-alloyed steel components in fossil-fired power plant applications at temperatures of up to and above 200 °C. This particularly applies to respective start-up and shut-down processes associated with alternating service-conditions in terms of load flexible power plants. For quantitative determination of localized crack critical hydrogen concentrations, the temperature dependent hydrogen diffusion coefficients have to be determined as exactly as possible.
However, available literature provides a wide range of hydrogen diffusion coefficients for low alloyed steels with similar microstructures. Additionally, the available diffusion data seem not to be very reliable and their scatter increases with decreasing temperature. One reason is that the experimental boundary conditions can have a major impact on the determination of respective effective diffusion coefficients. Hence, the scope of this study is to evaluate the influence of the experimental boundary conditions on the derived diffusion coefficients. In addition, different methods for calculating diffusion coefficients are discussed. To elucidate such influences and to draw a line to practical application, the diffusion and trapping behavior in the creep resistant steel 7CrMoVTiB10 10 has been studied.
For such purpose, hydrogen charged specimens were isothermally degassed at different temperatures using carrier gas hot extraction (CGHE). Based on experimental data, a numerical model has been developed by which the hydrogen transport behavior and the respective hydrogen distribution during CGHE can be assessed.
It is demonstrated that the specimen heating rate has a large influence on the calculated diffusion coefficients under assumption of isothermal degassing which elsewhere has been underestimated in the assessment of diffusion data in creep-resistant steels. The numerical results suggest that calculation methods for diffusion coefficients are limited if compared to experimental results. It also turned out that the sample preparation time before CGHE can enormously influence determined diffusion coefficients. Consequently, non-homogeneous hydrogen concentration profiles have to be anticipated in the simulations to arrive at characteristic effusion curves consistent to respective CGHE experiments. In turn, validated diffusion coefficients are now available for the low-alloyed Cr-Mo-V steel which might be helpful to calculate appropriate hydrogen removal heat treatment procedures, for instance.
Modeling of Hydrogen-Assisted Cracking (HAC) in Duplex Stainless Steels (DSS):
- Hydrogen causes significant degradation in DSS and consequently HAC
- Mechanisms of HAC have not been fully understood in two-phase microstructures
- Mesoscale numerical modeling for HAC in DSS was created, coupled to the macroscale, enabling simulation of HAC in both phases independent from predefined crack paths
Renewable resources become more and more relevant to maintain energy demands for an increasing global population. Biosynthetic fuels like biodiesel might replace conventional petrochemical fuels, such as diesel. However, more research is needed to characterize the interaction between the different fuels and the polymeric material, especially with respect to ageing and degradation.
The poster will present several interaction and degradation phenomena of high density polyethylene (PE-HD) induced by diesel and biodiesel 1-3. Also the possible influence of microbial growth (fungi and bacteria) is considered. The chosen PE-HDs are typical thermoplastic resins for container and storage tank applications. Degradation of PE-HD will be investigated by changes of the mechanical properties – with main emphasis on the Charpy impact strength 2. Furthermore, with alternating sorption and desorption cycles in combination with oven ageing the co-oxidation 3 of PE-HD in contact with biodiesel will be addressed.