Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2016 (25) (entfernen)
Dokumenttyp
- Vortrag (13)
- Beitrag zu einem Tagungsband (8)
- Zeitschriftenartikel (4)
Schlagworte
- NDT (25) (entfernen)
Eingeladener Vortrag
- nein (13)
Evaluation of high spatial resolution imaging of magnetic stray fields for early damage detection
(2016)
Metal magnetic memory (MMM) technique with associated ISO 24497-1:3 is gaining considerable interest in the magnetic NDT community. In contrast to traditional Magnetic Flux Leakage (MFL) testing, the inspection objects are not intentionally magnetized by an external magnetic field. Due to the physical coupling between mechanical stress and magnetization of ferromagnetic materials, it is assumed that the distribution of the residual MFL correspond to the internal stress of the specimen, or in the most general sense, to a degradation of the material.
Usually, MMM measurements are performed by relatively bulky magnetic inspection sensors. The evaluation of local magnetic field distribution is limited thereby. Highprecision GMR (Giant Magneto Resistance) measurements in the micrometer regime can provide a higher degree of information due to better spatial resolution.
We present a concise summary of studies on the correlation of magnetic structure and microstructure of steels. In particular, we compare residual stress measurements in S235JRC steel welds by means of neutron diffraction with high resolution magnetic field mappings. Results indicate a qualitative correlation between residual stresses and local stray field variation. In addition, stray field measurements of plastically deformed specimens for quasi-static and cyclic loading cases are discussed. The present study concludes that GMR sensors can detect inhomogeneous plastic deformations of S235JR steel in a very early stage, without specific signal processing according to the ISO 24497-1:3.
The canister for the permanent storage of spent nuclear fuel used by SKB in Sweden consists of a cast iron insert surrounded by a five centimetre thick shell of copper. It is a safety critical component and in order to secure long-term structural integrity non-destructive methods are used to inspect 100% of the volume of each canister, before it is disposed of in the repository. One of the critical components that requires inspection is a sealing weld, joining the copper tube and the lid. The friction stir weld is inspected using an ultrasonic phased array system. The area of the weld is inspected with several inspection channels with different angles and varying coverage. To make sure that no defects that might occur in the weld are overseen, the reliability of the inspection must be quantified. The reliability of NDT is usually quantified with the probability of detection curves. The influence of the parameters that might influence the POD of the flaws in the weld is investigated analysing the experimental results, as well as with a help of a numerical simulation of the inspection.
The canister for the permanent storage of spent nuclear fuel used by SKB in Sweden consists of a cast iron insert surrounded by a five centimetre thick shell of copper. It is a safety critical component and in order to secure long-term structural integrity non-destructive methods are used to inspect 100% of the volume of each canister, before it is disposed of in the repository. One of the critical components that requires inspection is a sealing weld, joining the copper tube and the lid. The friction stir weld is inspected using an ultrasonic phased array system. The area of the weld is inspected with several inspection channels with different angles and varying coverage. To make sure that no defects that might occur in the weld are overseen, the reliability of the inspection must be quantified. The reliability of NDT is usually quantified with the probability of detection curves. The influence of the parameters that might influence the POD of the flaws in the weld is investigated analysing the experimental results, as well as with a help of a numerical simulation of the inspection.
Currently at Deutsche Bahn (DB) ultrasonic inspections in maintenance procedures for wheelset axles with a bore hole are, to the greatest possible extent, carried out using automated ultrasonic inspection system. Although the acceptance levels are in accordance with DIN 27201 part 7, the testing results have shown in recent years that in the case of true indications, the effective defect sizes were far below the level of acceptance. Due to this experience it can be assumed that the automated ultrasonic inspection systems are testing substantially more sensitively than required. This increased sensitivity leads to an increase in false indications, generally resulting in the unnecessary demounting of wheelsets. In Research cooperation between Federal Institute for Materials Research and Testing (BAM) and DB the effective flaw detection sensitivity of existing automated ultrasonic inspection system will be determined and the true/false indication ratio optimised. Through systematic investigations with the Probability of Detection method on the existing automated ultrasonic inspection system the results could be directly applied to the optimisation of existing ultrasonic inspections of wheelset axles with a bore hole in maintenance procedures and the level of reliability can be considerably increased.
Motivation: What can we learn from the history of aerospace?
State of the art: Detectability as the basis of probability of failure
Evaluationmethods: Consequences of decisions based on ndt
Advanced approaches: Probability of Detection: Evaluation of ndt systems are important!
Use of the POD: Out of the box: Finnish and Swedish project for final disposal of spent nuclear fuel
Reliability of NDT depends not only on the intrinsic capability of the measuring systems and on the application factors (the conditions under which NDT is applied), but also—and to a great extent—on human factors and the organisational context under which each inspection is carried out.
Adoption of a systematic approach to the identification and prevention of risks.
Critical defects could be missed, even if the inspection process is semi-automated. The causes of that risk lie in the technology, people and in the organisation. Currently installed preventive measures are insufficient to prevent from risks New preventive measures could be installed, e.g. further automation, installing alarms, implementing human redundancy, developing software and hardware solutions, optimising procedures, etc.
Human factors studies are not only essential for the operation but also during the development process.
Over the past couple of decades Non-Destructive Testing (NDT) has seen a significant increase in the use of automation. In addition to increased reliability, objectivity, consistency, repeatability, productivity, and so on, automating parts of the process is expected to decrease the potential for human error. However, the literature on human-automation interaction suggests that automation is not only associated with benefits, but also with new risks and risk sources. First, this paper will present the methodology used to identify—for the first time—possible risks associated with mechanised data acquisition and corresponding data evaluation. Moreover, it will highlight possible risks, their causes, consequences, and ways of preventing them. Second, those preventive measures will be further analysed by examining new risks that can arise from their implementation, i.e. potential for failure that can arise from (a) working with automated defect-detection and sizing aids, (b) implementing human redundancy, and (c) improvement of the inspection procedures without due consideration of the procedure users. And third, some optimisations strategies will be provided. The purpose of this work is to show that mechanised testing is associated with potential for failure and that the sources of those risks go beyond single inspectors and need to be looked at in the interaction of people with other systems, i.e. the technology, the team and, most importantly, the organisation.
How much information do we need? A reflection of the correct use of real defects in POD-evaluations
(2016)
To evaluate the capability of a non destructive testing system the “truth” of the used defects is essential. But what exactly is the truth of a real defect? And how much information is usable for the study? This presentation gives an overview about an advanced use of multiple metallographic cuts for the POD evaluation. In the presentation an approach is shown where information of metallographic studies are reconstructed and weighted to gain the essential information about real defects and which information are important for the detection with radiographic testing equipment. Furthermore, different connection points are discussed were additional knowledge from simulation and artificial defects can be used to gain additional certainty for the result of the evaluation. The methodology is used for the evaluation for the digital radiographic testing system for the testing of electron-beam welds, which is one possible choice to seal the Finnish copper canisters for the final deposit of spent nuclear fuel.
Civil engineers, who are involved in nondestructive testing have to solve an essential task: the transfer of the results of NDT-research into practice. NDT in civil Engineering is a quite new discipline. The results must meet the needs of the infrastructure owners to convince them about the usefulness of NDT. The issue of reliability of the NDT-data was discussed.
The field of human factors has been concerned with prevention of organisational accidents and the maintaining of the highest safety standards in organisations with high hazard potential since its beginnings. Whereas it is known that human error has contributed to some well-known accidents and events in various safety-critical applications, as well as in railway, and that human factors have an impact on how reliable our non-destructive inspections are, very little has been done so far to address human factors, especially in the railway sector.
The first steps in addressing human factors in the inspection of railway axles has been carried out by analysing the results of manual ultrasonic inspection of the railway axles during requalification in the education centre of the German Society for Non-Destructive Testing (DGZfP). In addition to the inspection, 160 participants were asked to fill out a questionnaire with the aim of identifying potential factors influencing their performance. The results showed that no correlation between the possible influencing factors (i.e. experience, level of qualification, satisfaction with the conditions during the re-qualification as well as in the daily practice and mental workload) and the inspection results. The explanation for this result was found in the fact that questionnaires can be used only to identify indirectly influencing factors. The only way to identify directly influencing factors and establish cause-effect relationships is by experimental study. The limitation of this study was the inability to influence the participants in any way during the requalification examination. Another angle used to identify potential influencing factors was the use of human-oriented Failure Modes and Effects Analysis. Carried out together with 4 experts from the field practice, two lecturers and two scientists, this analysis provided with an extensive list of possible failures, their causes, consequences and possible barriers. The largest benefits for the reliability of manual ultrasonic railway axle inspections in the practice can be found in attending to the organisational aspects of the inspection (e.g. processes, procedures, communication, education, supervision etc.).